- 04 Nov, 2018 40 commits
-
-
Ake Koomsin authored
[ Upstream commit 05c998b7 ] Commit 713a98d9 ("virtio-net: serialize tx routine during reset") introduces netif_tx_disable() after netif_device_detach() in order to avoid use-after-free of tx queues. However, there are two issues. 1) Its operation is redundant with netif_device_detach() in case the interface is running. 2) In case of the interface is not running before suspending and resuming, the tx does not get resumed by netif_device_attach(). This results in losing network connectivity. It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for serializing tx routine during reset. This also preserves the symmetry of netif_device_detach() and netif_device_attach(). Fixes commit 713a98d9 ("virtio-net: serialize tx routine during reset") Signed-off-by:
Ake Koomsin <ake@igel.co.jp> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Wang authored
[ Upstream commit ff002269 ] The idx in vhost_vring_ioctl() was controlled by userspace, hence a potential exploitation of the Spectre variant 1 vulnerability. Fixing this by sanitizing idx before using it to index d->vqs. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 84dad559 ] The commit eb63f296 ("udp6: add missing checks on edumux packet processing") used the same return code convention of the ipv4 counterpart, but ipv6 uses the opposite one: positive values means resubmit. This change addresses the issue, using positive return value for resubmitting. Also update the related comment, which was broken, too. Fixes: eb63f296 ("udp6: add missing checks on edumux packet processing") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit b336deca ] syzbot reported an use-after-free involving sctp_id2asoc. Dmitry Vyukov helped to root cause it and it is because of reading the asoc after it was freed: CPU 1 CPU 2 (working on socket 1) (working on socket 2) sctp_association_destroy sctp_id2asoc spin lock grab the asoc from idr spin unlock spin lock remove asoc from idr spin unlock free(asoc) if asoc->base.sk != sk ... [*] This can only be hit if trying to fetch asocs from different sockets. As we have a single IDR for all asocs, in all SCTP sockets, their id is unique on the system. An application can try to send stuff on an id that matches on another socket, and the if in [*] will protect from such usage. But it didn't consider that as that asoc may belong to another socket, it may be freed in parallel (read: under another socket lock). We fix it by moving the checks in [*] into the protected region. This fixes it because the asoc cannot be freed while the lock is held. Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com Acked-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 6b839b6c ] rtl_rx() and rtl_tx() are called only if the respective bits are set in the interrupt status register. Under high load NAPI may not be able to process all data (work_done == budget) and it will schedule subsequent calls to the poll callback. rtl_ack_events() however resets the bits in the interrupt status register, therefore subsequent calls to rtl8169_poll() won't call rtl_rx() and rtl_tx() - chip interrupts are still disabled. Fix this by calling rtl_rx() and rtl_tx() independent of the bits set in the interrupt status register. Both functions will detect if there's nothing to do for them. Fixes: da78dbff ("r8169: remove work from irq handler.") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit db4f1be3 ] Current handling of CHECKSUM_COMPLETE packets by the UDP stack is incorrect for any packet that has an incorrect checksum value. udp4/6_csum_init() will both make a call to __skb_checksum_validate_complete() to initialize/validate the csum field when receiving a CHECKSUM_COMPLETE packet. When this packet fails validation, skb->csum will be overwritten with the pseudoheader checksum so the packet can be fully validated by software, but the skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way the stack can later warn the user about their hardware spewing bad checksums. Unfortunately, leaving the SKB in this state can cause problems later on in the checksum calculation. Since the the packet is still marked as CHECKSUM_COMPLETE, udp_csum_pull_header() will SUBTRACT the checksum of the UDP header from skb->csum instead of adding it, leaving us with a garbage value in that field. Once we try to copy the packet to userspace in the udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg() to checksum the packet data and add it in the garbage skb->csum value to perform our final validation check. Since the value we're validating is not the proper checksum, it's possible that the folded value could come out to 0, causing us not to drop the packet. Instead, we believe that the packet was checksummed incorrectly by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt to warn the user with netdev_rx_csum_fault(skb->dev); Unfortunately, since this is the UDP path, skb->dev has been overwritten by skb->dev_scratch and is no longer a valid pointer, so we end up reading invalid memory. This patch addresses this problem in two ways: 1) Do not use the dev pointer when calling netdev_rx_csum_fault() from skb_copy_and_csum_datagram_msg(). Since this gets called from the UDP path where skb->dev has been overwritten, we have no way of knowing if the pointer is still valid. Also for the sake of consistency with the other uses of netdev_rx_csum_fault(), don't attempt to call it if the packet was checksummed by software. 2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init(). If we receive a packet that's CHECKSUM_COMPLETE that fails verification (i.e. skb->csum_valid == 0), check who performed the calculation. It's possible that the checksum was done in software by the network stack earlier (such as Netfilter's CONNTRACK module), and if that says the checksum is bad, we can drop the packet immediately instead of waiting until we try and copy it to userspace. Otherwise, we need to mark the SKB as CHECKSUM_NONE, since the skb->csum field no longer contains the full packet checksum after the call to __skb_checksum_validate_complete(). Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Fixes: c84d9490 ("udp: copy skb->truesize in the first cache line") Cc: Sam Kumar <samanthakumar@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Niklas Cassel authored
[ Upstream commit 30549aab ] When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC, or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set. The only exception is CONFIG_STMMAC_PCI. When calling of_mdiobus_register(), it will call our ->reset() callback, which is set to stmmac_mdio_reset(). Most of the code in stmmac_mdio_reset() is protected by a "#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate to false when CONFIG_STMMAC_PLATFORM=m. Because of this, the phy reset gpio will only be pulled when stmmac is built as built-in, but not when built as modules. Fix this by using "#if IS_ENABLED()" instead of "#if defined()". Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit b6168562 ] In ethtool_ioctl(), the ioctl command 'ethcmd' is checked through a switch statement to see whether it is necessary to pre-process the ethtool structure, because, as mentioned in the comment, the structure ethtool_rxnfc is defined with padding. If yes, a user-space buffer 'rxnfc' is allocated through compat_alloc_user_space(). One thing to note here is that, if 'ethcmd' is ETHTOOL_GRXCLSRLALL, the size of the buffer 'rxnfc' is partially determined by 'rule_cnt', which is actually acquired from the user-space buffer 'compat_rxnfc', i.e., 'compat_rxnfc->rule_cnt', through get_user(). After 'rxnfc' is allocated, the data in the original user-space buffer 'compat_rxnfc' is then copied to 'rxnfc' through copy_in_user(), including the 'rule_cnt' field. However, after this copy, no check is re-enforced on 'rxnfc->rule_cnt'. So it is possible that a malicious user race to change the value in the 'compat_rxnfc->rule_cnt' between these two copies. Through this way, the attacker can bypass the previous check on 'rule_cnt' and inject malicious data. This can cause undefined behavior of the kernel and introduce potential security risk. This patch avoids the above issue via copying the value acquired by get_user() to 'rxnfc->rule_cn', if 'ethcmd' is ETHTOOL_GRXCLSRLALL. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 38b4f18d ] gred_change_table_def() takes a pointer to TCA_GRED_DPS attribute, and expects it will be able to interpret its contents as struct tc_gred_sopt. Pass the correct gred attribute, instead of TCA_OPTIONS. This bug meant the table definition could never be changed after Qdisc was initialized (unless whatever TCA_OPTIONS contained both passed netlink validation and was a valid struct tc_gred_sopt...). Old behaviour: $ ip link add type dummy $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 RTNETLINK answers: Invalid argument Now: $ ip link add type dummy $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 $ tc qdisc replace dev dummy0 parent root handle 7: \ gred setup vqs 4 default 0 Fixes: f62d6b93 ("[PKT_SCHED]: GRED: Use central VQ change procedure") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 4ba4c566 ] The loop wants to skip previously dumped addresses, so loops until current index >= saved index. If the message fills it wants to save the index for the next address to dump - ie., the one that did not fit in the current message. Currently, it is incrementing the index counter before comparing to the saved index, and then the saved index is off by 1 - it assumes the current address is going to fit in the message. Change the index handling to increment only after a succesful dump. Fixes: 502a2ffd ("ipv6: convert idev_list to list macros") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Fugang Duan authored
[ Upstream commit ec20a63a ] Commit db65f35f ("net: fec: add support of ethtool get_regs") introduce ethool "--register-dump" interface to dump all FEC registers. But not all silicon implementations of the Freescale FEC hardware module have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start Register) register, so we should not be trying to dump them on those that don't. To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before dump those RX FIFO registers. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 5a8e7aea ] WHen an llc sock is added into the sk_laddr_hash of an llc_sap, it is not marked with SOCK_RCU_FREE. This causes that the sock could be freed while it is still being read by __llc_lookup_established() with RCU read lock. sock is refcounted, but with RCU read lock, nothing prevents the readers getting a zero refcnt. Fix it by setting SOCK_RCU_FREE in llc_sap_add_socket(). Reported-by: syzbot+11e05f04c15e03be5254@syzkaller.appspotmail.com Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit ee1abcf6 ] Commit a61bbcf2 ("[NET]: Store skb->timestamp as offset to a base timestamp") introduces a neighbour control buffer and zeroes it out in ndisc_rcv(), as ndisc_recv_ns() uses it. Commit f2776ff0 ("[IPV6]: Fix address/interface handling in UDP and DCCP, according to the scoping architecture.") introduces the usage of the IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in present-day __udp6_lib_err()). Now, with commit b94f1c09 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()."), we call protocol error handlers from ndisc_redirect_rcv(), after the control buffer is already stolen and some parts are already zeroed out. This implies that inet6_iif() on this path will always return zero. This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as we might actually need to match sockets for a given interface. Instead of always claiming the control buffer in ndisc_rcv(), do that only when needed. Fixes: b94f1c09 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit dc012f36 ] syzbot found a use-after-free in inet6_mc_check [1] The problem here is that inet6_mc_check() uses rcu and read_lock(&iml->sflock) So the fact that ip6_mc_leave_src() is called under RTNL and the socket lock does not help us, we need to acquire iml->sflock in write mode. In the future, we should convert all this stuff to RCU. [1] BUG: KASAN: use-after-free in ipv6_addr_equal include/net/ipv6.h:521 [inline] BUG: KASAN: use-after-free in inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649 Read of size 8 at addr ffff8801ce7f2510 by task syz-executor0/22432 CPU: 1 PID: 22432 Comm: syz-executor0 Not tainted 4.19.0-rc7+ #280 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 ipv6_addr_equal include/net/ipv6.h:521 [inline] inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649 __raw_v6_lookup+0x320/0x3f0 net/ipv6/raw.c:98 ipv6_raw_deliver net/ipv6/raw.c:183 [inline] raw6_local_deliver+0x3d3/0xcb0 net/ipv6/raw.c:240 ip6_input_finish+0x467/0x1aa0 net/ipv6/ip6_input.c:345 NF_HOOK include/linux/netfilter.h:289 [inline] ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:426 ip6_mc_input+0x48a/0xd20 net/ipv6/ip6_input.c:503 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76 NF_HOOK include/linux/netfilter.h:289 [inline] ipv6_rcv+0x120/0x640 net/ipv6/ip6_input.c:271 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 netif_receive_skb_internal+0x12c/0x620 net/core/dev.c:5126 napi_frags_finish net/core/dev.c:5664 [inline] napi_gro_frags+0x75a/0xc90 net/core/dev.c:5737 tun_get_user+0x3189/0x4250 drivers/net/tun.c:1923 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1968 call_write_iter include/linux/fs.h:1808 [inline] do_iter_readv_writev+0x8b0/0xa80 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1f1/0x360 fs/read_write.c:1004 do_writev+0x11a/0x310 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457421 Code: 75 14 b8 14 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 34 b5 fb ff c3 48 83 ec 08 e8 1a 2d 00 00 48 89 04 24 b8 14 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 63 2d 00 00 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00007f2d30ecaba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 000000000000003e RCX: 0000000000457421 RDX: 0000000000000001 RSI: 00007f2d30ecabf0 RDI: 00000000000000f0 RBP: 0000000020000500 R08: 00000000000000f0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f2d30ecb6d4 R13: 00000000004c4890 R14: 00000000004d7b90 R15: 00000000ffffffff Allocated by task 22437: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc mm/slab.c:3718 [inline] __kmalloc+0x14e/0x760 mm/slab.c:3727 kmalloc include/linux/slab.h:518 [inline] sock_kmalloc+0x15a/0x1f0 net/core/sock.c:1983 ip6_mc_source+0x14dd/0x1960 net/ipv6/mcast.c:427 do_ipv6_setsockopt.isra.9+0x3afb/0x45d0 net/ipv6/ipv6_sockglue.c:743 ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:933 rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1069 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3038 __sys_setsockopt+0x1ba/0x3c0 net/socket.c:1902 __do_sys_setsockopt net/socket.c:1913 [inline] __se_sys_setsockopt net/socket.c:1910 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1910 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 22430: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3813 __sock_kfree_s net/core/sock.c:2004 [inline] sock_kfree_s+0x29/0x60 net/core/sock.c:2010 ip6_mc_leave_src+0x11a/0x1d0 net/ipv6/mcast.c:2448 __ipv6_sock_mc_close+0x20b/0x4e0 net/ipv6/mcast.c:310 ipv6_sock_mc_close+0x158/0x1d0 net/ipv6/mcast.c:328 inet6_release+0x40/0x70 net/ipv6/af_inet6.c:452 __sock_release+0xd7/0x250 net/socket.c:579 sock_close+0x19/0x20 net/socket.c:1141 __fput+0x385/0xa30 fs/file_table.c:278 ____fput+0x15/0x20 fs/file_table.c:309 task_work_run+0x1e8/0x2a0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:193 [inline] exit_to_usermode_loop+0x318/0x380 arch/x86/entry/common.c:166 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x6be/0x820 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801ce7f2500 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 16 bytes inside of 192-byte region [ffff8801ce7f2500, ffff8801ce7f25c0) The buggy address belongs to the page: page:ffffea000739fc80 count:1 mapcount:0 mapping:ffff8801da800040 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006f6e548 ffffea000737b948 ffff8801da800040 raw: 0000000000000000 ffff8801ce7f2000 0000000100000010 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801ce7f2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801ce7f2480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff8801ce7f2500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801ce7f2580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8801ce7f2600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 0fe5119e upstream. Recently a check was added which prevents marking of routers with zero source address, but for IPv6 that cannot happen as the relevant RFCs actually forbid such packets: RFC 2710 (MLDv1): "To be valid, the Query message MUST come from a link-local IPv6 Source Address, be at least 24 octets long, and have a correct MLD checksum." Same goes for RFC 3810. And also it can be seen as a requirement in ipv6_mc_check_mld_query() which is used by the bridge to validate the message before processing it. Thus any queries with :: source address won't be processed anyway. So just remove the check for zero IPv6 source address from the query processing function. Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Hangbin Liu authored
commit 5a2de63f upstream. Based on RFC 4541, 2.1.1. IGMP Forwarding Rules The switch supporting IGMP snooping must maintain a list of multicast routers and the ports on which they are attached. This list can be constructed in any combination of the following ways: a) This list should be built by the snooping switch sending Multicast Router Solicitation messages as described in IGMP Multicast Router Discovery [MRDISC]. It may also snoop Multicast Router Advertisement messages sent by and to other nodes. b) The arrival port for IGMP Queries (sent by multicast routers) where the source address is not 0.0.0.0. We should not add the port to router list when receives query with source 0.0.0.0. Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Colin Ian King authored
commit ffdf16ed upstream The error exit path when a duplicate is found does not kfree and cmd_entry struct and hence there is a small memory leak. Fix this by kfree'ing it. Detected by CoverityScan, CID#1370198 ("Resource Leak") Fixes: be1da707 ("drm/i915/gvt: vGPU command scanner") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by:
Sasha Levin <sashal@kernel.org>
-
Rasmus Villemoes authored
[ Upstream commit da15fc2f ] The Yocto build system does a 'make clean' when rebuilding due to changed dependencies, and that consistently fails for me (causing the whole BSP build to fail) with errors such as | find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory | find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory | find: find: '[...]/perf/1.0-r9/perf-1.0/libtraceevent.a''[...]/perf/1.0-r9/perf-1.0/libtraceevent.a': No such file or directory: No such file or directory | [...] | find: cannot delete '/mnt/xfs/devel/pil/yocto/tmp-glibc/work/wandboard-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/util/.pstack.o.cmd': No such file or directory Apparently (despite the comment), 'make clean' ends up launching multiple sub-makes that all want to remove the same things - perhaps this only happens in combination with a O=... parameter. In any case, we don't lose much by explicitly disabling the parallelism for the clean target, and it makes automated builds much more reliable. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180705131527.19749-1-linux@rasmusvillemoes.dkSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit 28c74ff8. From Florian Westphal <fw@strlen.de>: It causes kernel crash for locally generated ipv6 fragments when netfilter ipv6 defragmentation is used. The faulty commit is not essential for -stable, it only delays netns teardown for longer than needed when that netns still has ipv6 frags queued. Much better than crash :-/ Signed-off-by:
-
Takashi Iwai authored
commit f9a1c372 upstream The us122l driver creates URBs per the fixed endpoints, and this may end up with URBs with inconsistent pipes when a fuzzer or a malicious program deals with the manipulated endpoints. It ends up with a kernel warning like: usb 1-1: BOGUS urb xfer, pipe 0 != type 3 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 24 at drivers/usb/core/urb.c:471 usb_submit_urb+0x113e/0x1400 Call Trace: usb_stream_start+0x48a/0x9f0 sound/usb/usx2y/usb_stream.c:690 us122l_start+0x116/0x290 sound/usb/usx2y/us122l.c:365 us122l_create_card sound/usb/usx2y/us122l.c:502 us122l_usb_probe sound/usb/usx2y/us122l.c:588 .... For avoiding the bad access, this patch adds a few sanity checks of the validity of created URBs like previous similar fixes using the new usb_urb_ep_type_check() helper function. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Philipp Zabel authored
commit f9ffcb0a upstream kref_init initializes the reference count to 1, not 0. This additional reference is never released since the conversion to reference counters. As a result, uvc_delete is not called anymore when UVC cameras are disconnected. Fix this by adding an additional kref_put in uvc_disconnect and in the probe error path. This also allows to remove the temporary additional reference in uvc_unregister_video. Fixes: 9d15cd95 ("media: uvcvideo: Convert from using an atomic variable to a reference count") Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Chris Paterson authored
commit fcab5651 upstream The R-Car H2 hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: a8b805f3 ("ARM: dts: r8a7790: enable to use thermal-zone") Signed-off-by:
Chris Paterson <chris.paterson2@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Peter Xu authored
commit 5663d8f9 upstream ------------[ cut here ]------------ Bad FPU state detected at kvm_put_guest_fpu+0xd8/0x2d0 [kvm], reinitializing FPU registers. WARNING: CPU: 1 PID: 4594 at arch/x86/mm/extable.c:103 ex_handler_fprestore+0x88/0x90 CPU: 1 PID: 4594 Comm: qemu-system-x86 Tainted: G B OE 4.15.0-rc2+ #10 RIP: 0010:ex_handler_fprestore+0x88/0x90 Call Trace: fixup_exception+0x4e/0x60 do_general_protection+0xff/0x270 general_protection+0x22/0x30 RIP: 0010:kvm_put_guest_fpu+0xd8/0x2d0 [kvm] RSP: 0018:ffff8803d5627810 EFLAGS: 00010246 kvm_vcpu_reset+0x3b4/0x3c0 [kvm] kvm_apic_accept_events+0x1c0/0x240 [kvm] kvm_arch_vcpu_ioctl_run+0x1658/0x2fb0 [kvm] kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 do_syscall_64+0x15f/0x600 where kvm_put_guest_fpu is called without a prior kvm_load_guest_fpu. To fix it, move kvm_load_guest_fpu to the very beginning of kvm_arch_vcpu_ioctl_run. Cc: stable@vger.kernel.org Fixes: f775b13eSigned-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Kimmo Rautkoski authored
[ Upstream commit d616f81c ] Added support for is25wp032, is25wp064 and is25wp128. Signed-off-by:
Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Reviewed-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> [ Adrian Bunk: Trivial adaption to changed context. ] Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Christoph Paasch authored
Upstream commit bffa72cf ("net: sk_buff rbnode reorg") got backported as commit 6b921536 ("net: sk_buff rbnode reorg") into the v4.14.x-tree. However, the backport does not include the changes in sch_netem.c We need these, as otherwise the skb->dev pointer is not set when dequeueing from the netem rbtree, resulting in a panic: [ 15.427748] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 [ 15.428863] IP: netif_skb_features+0x24/0x230 [ 15.429402] PGD 0 P4D 0 [ 15.429733] Oops: 0000 [#1] SMP PTI [ 15.430169] Modules linked in: [ 15.430614] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.77.mptcp #77 [ 15.431497] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 15.432568] task: ffff88042db19680 task.stack: ffffc90000070000 [ 15.433356] RIP: 0010:netif_skb_features+0x24/0x230 [ 15.433977] RSP: 0018:ffff88043fd83e70 EFLAGS: 00010286 [ 15.434665] RAX: ffff880429ad80c0 RBX: ffff88042bd0e400 RCX: ffff880429ad8000 [ 15.435585] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88042bd0e400 [ 15.436551] RBP: ffff88042bd0e400 R08: ffff88042a4b6c9c R09: 0000000000000001 [ 15.437485] R10: 0000000000000004 R11: 0000000000000000 R12: ffff88042c700000 [ 15.438393] R13: ffff88042c700000 R14: ffff88042a4b6c00 R15: ffff88042c6bb000 [ 15.439315] FS: 0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000 [ 15.440314] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.441084] CR2: 00000000000000d0 CR3: 000000042c374000 CR4: 00000000000006e0 [ 15.442016] Call Trace: [ 15.442333] <IRQ> [ 15.442596] validate_xmit_skb+0x17/0x270 [ 15.443134] validate_xmit_skb_list+0x38/0x60 [ 15.443698] sch_direct_xmit+0x102/0x190 [ 15.444198] __qdisc_run+0xe3/0x240 [ 15.444671] net_tx_action+0x121/0x140 [ 15.445177] __do_softirq+0xe2/0x224 [ 15.445654] irq_exit+0xbf/0xd0 [ 15.446072] smp_apic_timer_interrupt+0x5d/0x90 [ 15.446654] apic_timer_interrupt+0x7d/0x90 [ 15.447185] </IRQ> [ 15.447460] RIP: 0010:native_safe_halt+0x2/0x10 [ 15.447992] RSP: 0018:ffffc90000073f10 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff10 [ 15.449008] RAX: ffffffff816667d0 RBX: ffffffff820946b0 RCX: 0000000000000000 [ 15.449895] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 15.450768] RBP: ffffffff82026940 R08: 00000004e858e5e1 R09: ffff88042a4b6d58 [ 15.451643] R10: 0000000000000000 R11: 000000d0d56879bb R12: 0000000000000000 [ 15.452478] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 15.453340] ? __sched_text_end+0x2/0x2 [ 15.453835] default_idle+0xf/0x20 [ 15.454259] do_idle+0x170/0x200 [ 15.454653] cpu_startup_entry+0x14/0x20 [ 15.455142] secondary_startup_64+0xa5/0xb0 [ 15.455715] Code: 1f 84 00 00 00 00 00 55 53 48 89 fd 48 83 ec 08 8b 87 bc 00 00 00 48 8b 8f c0 00 00 00 0f b6 97 81 00 00 00 48 8b 77 10 48 01 c8 <48> 8b 9 [ 15.458138] RIP: netif_skb_features+0x24/0x230 RSP: ffff88043fd83e70 [ 15.458933] CR2: 00000000000000d0 [ 15.459352] ---[ end trace 083925903ae60570 ]--- Fixes: 6b921536 ("net: sk_buff rbnode reorg") Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Khazhismel Kumykov authored
[ Upstream commit ac081c3b ] On non-preempt kernels this loop can take a long time (more than 50 ticks) processing through entries. Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.comSigned-off-by:
Khazhismel Kumykov <khazhy@google.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 3c718e67 ] the script rtnetlink.sh requires a bash-only features (sleep with sub-second precision). This may cause random test failure if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter. Fixes: 33b01b7b ("selftests: add rtnetlink test script") Signed-off-by:
-
Arthur Kiyanovski authored
[ Upstream commit 78a55d05 ] napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Arthur Kiyanovski authored
[ Upstream commit d79c3888 ] Memory mapped with devm_ioremap is automatically freed when the driver is disconnected from the device. Therefore there is no need to explicitly call devm_iounmap. Fixes: 0857d92f ("net: ena: add missing unmap bars on device removal") Fixes: 411838e7 ("net: ena: fix rare kernel crash when bar memory remap fails") Signed-off-by:
-
David Howells authored
[ Upstream commit 64753092 ] Fix connection-level abort handling to cache the abort and error codes properly so that a new incoming call can be properly aborted if it races with the parent connection being aborted by another CPU. The abort_code and error parameters can then be dropped from rxrpc_abort_calls(). Fixes: f5c17aae ("rxrpc: Calls should only have one terminal state") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 298bc15b ] Move the out-of-order and duplicate ACK packet check to before the call to rxrpc_input_ackinfo() so that the receive window size and MTU size are only checked in the latest ACK packet and don't regress. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
David Howells authored
[ Upstream commit c479d5f2 ] We should only call the function to end a call's Tx phase if we rotated the marked-last packet out of the transmission buffer. Make rxrpc_rotate_tx_window() return an indication of whether it just rotated the packet marked as the last out of the transmit buffer, carrying the information out of the locked section in that function. We can then check the return value instead of examining RXRPC_CALL_TX_LAST. Fixes: 70790dbe ("rxrpc: Pass the last Tx packet marker in the annotation buffer") Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 05a2f546 ] When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1 it fails with: GEN /tmp/build/perf/python/perf.so In file included from /usr/include/python3.7m/Python.h:126, from /git/linux/tools/perf/util/python.c:2: /usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls] PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *); ^~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name, ^~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors error: command 'gcc' failed with exit status 1 And indeed there is a redundant declaration in that Python.h file, one with parameter names and the other without, so just add -Wno-error=redundant-decls to the python setup instructions. Now perf builds with gcc in ClearLinux with the following Dockerfile: # docker.io/acmel/linux-perf-tools-build-clearlinux:latest FROM docker.io/clearlinux:latest MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org> RUN swupd update && \ swupd bundle-add sysadmin-basic-dev RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \ groupadd -r perfbuilder && \ useradd -m -r -g perfbuilder perfbuilder && \ chown -R perfbuilder.perfbuilder /tmp/build/ /git/ USER perfbuilder COPY rx_and_build.sh / ENV EXTRA_MAKE_ARGS=PYTHON=python3 ENTRYPOINT ["/rx_and_build.sh"] Now to figure out why the build fails with clang, that is present in the above container as detected by the rx_and_build.sh script: clang version 6.0.1 (tags/RELEASE_601/final) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /usr/sbin make: Entering directory '/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop. make[1]: *** [Makefile.perf:206: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/git/linux/tools/perf' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thiago Macieira <thiago.macieira@intel.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.orgSigned-off-by:
-
Sascha Hauer authored
[ Upstream commit eea96566 ] The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the 1.2GHz OPP. This makes the board work again with configs that have cpufreq enabled like imx_v6_v7_defconfig on which the board stopped working with the addition of cpufreq-dt support. Fixes: 791f4166 ("ARM: dts: imx53: add cpufreq-dt support") Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 04f264d3 ] We have a need to override the definition of barrier_before_unreachable() for MIPS, which means we either need to add architecture-specific code into linux/compiler-gcc.h or we need to allow the architecture to provide a header that can define the macro before the generic definition. The latter seems like the better approach. A straightforward approach to the per-arch header is to make use of asm-generic to provide a default empty header & adjust architectures which don't need anything specific to make use of that by adding the header to generic-y. Unfortunately this doesn't work so well due to commit 28128c61 ("kconfig.h: Include compiler types to avoid missed struct attributes") which caused linux/compiler_types.h to be included in the compilation of every C file via the -include linux/kconfig.h flag in c_flags. Because the -include flag is present for all C files we compile, we need the architecture-provided header to be present before any C files are compiled. If any C files can be compiled prior to the asm-generic header wrappers being generated then we hit a build failure due to missing header. Such cases do exist - one pointed out by the kbuild test robot is the compilation of arch/ia64/kernel/nr-irqs.c, which occurs as part of the archprepare target [1]. This leaves us with a few options: 1) Use generic-y & fix any build failures we find by enforcing ordering such that the asm-generic target occurs before any C compilation, such that linux/compiler_types.h can always include the generated asm-generic wrapper which in turn includes the empty asm-generic header. This would rely on us finding all the problematic cases - I don't know for sure that the ia64 issue is the only one. 2) Add an actual empty header to each architecture, so that we don't need the generated asm-generic wrapper. This seems messy. 3) Give up & add #ifdef CONFIG_MIPS or similar to linux/compiler_types.h. This seems messy too. 4) Include the arch header only when it's actually needed, removing the need for the asm-generic wrapper for all other architectures. This patch allows us to use approach 4, by including an asm/compiler.h header from linux/compiler_types.h after the inclusion of the compiler-specific linux/compiler-*.h header(s). We do this conditionally, only when CONFIG_HAVE_ARCH_COMPILER_H is selected, in order to avoid the need for asm-generic wrappers & the associated build ordering issue described above. The asm/compiler.h header is included after the generic linux/compiler-*.h header(s) for consistency with the way linux/compiler-intel.h & linux/compiler-clang.h are included after the linux/compiler-gcc.h header that they override. [1] https://lists.01.org/pipermail/kbuild-all/2018-August/051175.htmlSigned-off-by:
Paul Burton <paul.burton@mips.com> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Patchwork: https://patchwork.linux-mips.org/patch/20269/ Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Hogan <jhogan@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-arch@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by:
-
Sandipan Das authored
[ Upstream commit aa90f9f9 ] Recently, the subtest numbering was changed to start from 1. While it is fine for displaying results, this should not be the case when the subtests are actually invoked. Typically, the subtests are stored in zero-indexed arrays and invoked based on the index passed to the main test function. Since the index now starts from 1, the second subtest in the array (index 1) gets invoked instead of the first (index 0). This applies to all of the following subtests but for the last one, the subtest always fails because it does not meet the boundary condition of the subtest index being lesser than the number of subtests. This can be observed on powerpc64 and x86_64 systems running Fedora 28 as shown below. Before: # perf test "builtin clang support" 55: builtin clang support : 55.1: builtin clang compile C source to IR : Ok 55.2: builtin clang compile C source to ELF object : FAILED! # perf test "LLVM search and compile" 38: LLVM search and compile : 38.1: Basic BPF llvm compile : Ok 38.2: kbuild searching : Ok 38.3: Compile source for BPF prologue generation : Ok 38.4: Compile source for BPF relocation : FAILED! # perf test "BPF filter" 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : FAILED! After: # perf test "builtin clang support" 55: builtin clang support : 55.1: builtin clang compile C source to IR : Ok 55.2: builtin clang compile C source to ELF object : Ok # perf test "LLVM search and compile" 38: LLVM search and compile : 38.1: Basic BPF llvm compile : Ok 38.2: kbuild searching : Ok 38.3: Compile source for BPF prologue generation : Ok 38.4: Compile source for BPF relocation : Ok # perf test "BPF filter" 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reported-by:
-
Daniel Mack authored
[ Upstream commit 4f666675 ] When powering down a SDIO connected card during suspend, make sure to call into the generic lbs_suspend() function before pulling the plug. This will make sure the card is successfully deregistered from the system to avoid communication to the card starving out. Fixes: 7444a809 ("libertas: fix suspend and resume for SDIO connected cards") Signed-off-by:
Daniel Mack <daniel@zonque.org> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 56869d45 ] The rule of mainmenu_stmt does not have debug print of zconf_lineno(), but if it had, it would print a wrong line number for the same reason as commit b2d00d7c ("kconfig: fix line numbers for if-entries in menu tree"). The mainmenu_stmt does not need to eat following empty lines because they are reduced to common_stmt. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 81a8b079 ] The newly added suspend/resume functions cause a build warning when CONFIG_PM is disabled: drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:324:12: error: 'stmmac_pci_resume' defined but not used [-Werror=unused-function] drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:306:12: error: 'stmmac_pci_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so gcc can drop them silently. Fixes: b7d0f08e ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 571d0563 ] The first argument to WARN_ONCE() is a condition. Fixes: 5800dc5c ("x86/paravirt: Fix spectre-v2 mitigations for paravirt guests") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alok Kataria <akataria@vmware.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: virtualization@lists.linux-foundation.org Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20180919103553.GD9238@mwandaSigned-off-by:
-
