Fix aead auth setting key process error. if use soft shash function, driver
need to use digest size replace of the user input key length.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Based on lessons learnt from optimizing the 32-bit version of this driver,
we can simplify the arm64 version considerably, by reordering the final
two stores when the last block is not a multiple of 64 bytes. This removes
the need to use permutation instructions to calculate the elements that are
clobbered by the final overlapping store, given that the store of the
penultimate block now follows it, and that one carries the correct values
for those elements already.

While at it, simplify the overlapping loads as well, by calculating the
address of the final overlapping load upfront, and switching to this
address for every load that would otherwise extend past the end of the
source buffer.

There is no impact on performance, but the resulting code is substantially
smaller and easier to follow.

Cc: Eric Biggers <ebiggers@google.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for the QAT gen4 devices in the firmware loader.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for broadcasting mode in firmware loader to enable the next
generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for shared ustore mode support. This is required by the next
generation of QAT devices to share the same fw image across engines.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Introduce new API, qat_uclo_set_cfg_ae_mask(), to allow the load of the
firmware image to a subset of Acceleration Engines (AEs). This is
required by the next generation of QAT devices to be able to load
different firmware images to the device.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add firmware control unit (FCU) CSRs to chip info so the firmware
authentication code is common between all devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for CSS3K, which uses RSA3K as image signature algorithm,
to support the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use ae_mask to decide which Accelerator Engine (AE) to target in AE
related operations, instead of a sequential loop, to skip AEs that are
fused out.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add null pointer check when freeing the memory for firmware.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add misc control CSR to chip info since the CSR offset will be different
in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the wake up event to chip info since this value will be different
in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add global clock enable CSR to the chip info since the CSR offset
will be different in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add reset CSR offset and mask to chip info since they are different
in new QAT devices. This also simplifies the reset/clrReset functions
by using the reset mask.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the local memory size to the chip info since the size of this memory
will be different in the next generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for local memory lm2 and lm3 which is introduced in the next
generation of QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Introduce the next neighbor (NN) capability in chip_info as NN registers
are not supported in certain SKUs of QAT.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Modify condition in qat_uclo_wr_mimage() to use a capability of the
device (sram_visible), rather than the device ID, so the check is not
specific to devices of the same type.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Introduce the chip info structure which contains device specific
information. The initialization path has been split between common and
hardware specific in order to facilitate the introduction of the next
generation hardware.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace long expressions with local variables in the functions
qat_uclo_wr_uimage_page(), qat_uclo_init_globals() and
qat_uclo_init_umem_seg() to improve readability.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Refactor qat_uclo_set_ae_mode() by moving the logic that sets the AE
modes to a separate function, qat_hal_set_modes().
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the definition of ICP_QAT_AE_OFFSET, ICP_QAT_CAP_OFFSET,
LOCAL_TO_XFER_REG_OFFSET and ICP_QAT_EP_OFFSET from qat_hal.c to
icp_qat_hal.h to avoid the definition of generation specific constants
in qat_hal.c.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Include the offset of GLOBAL_CSR directly into the enum hal_global_csr
and remove the macros SET_GLB_CSR/GET_GLB_CSR to simplify the global CSR
access.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change the API and the behaviour of the qat_hal_start() function.
With this change, the function starts under the hood all acceleration
engines (AEs) and there is no longer need to call it for each engine.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change micro word data mask since the Acceleration Engine (AE)
instruction codes have been changed in the new generation QAT devices.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change type for ctx_mask from unsigned char to unsigned long to avoid
type casting.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Improve the way micro instructions (FW code) are uploaded to Accelerator
Engines (AEs). If code starts at PC zero (absolute addressing), read
uwords with no relative address. Otherwise, use relative addressing to
the page region.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rename the function qat_uclo_del_uof_obj() in qat_uclo_del_obj() since
it frees the memory allocated for all firmware objects.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Introduce additional parenthesis to resolve a warninga reported by
checkpatch.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unnecessary parenthesis across the firmware loader.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change message in error path of qat_uclo_check_image_compat() to report
an incompatible firmware image that contains a neighbor register table.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Do not mask the AE number with the AE mask when accessing the AE local
CSRs. Bit 12 of the local CSR address is the start of AE number so just
take out the AE mask here.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The return value of qat_hal_rd_ae_csr() is always a CSR value and never
a status and should not be stored in the status variable of
qat_hal_put_rel_rd_xfer().

This removes the assignment as qat_hal_rd_ae_csr() is not expected to
fail.
A more comprehensive handling of the theoretical corner case which could
result in a fail will be submitted in a separate patch.

Fixes: 8c9478a4 ("crypto: qat - reduce stack size with KASAN")
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Implement infrastructure for the Multiple Object File (MOF) format
in the firmware loader. This will allow to load a specific firmware
image contained inside an MOF file.

This patch is based on earlier work done by Pingchao Yang.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Jack Xu <jack.xu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes all the sparse warnings in cavium/nitrox:

- Fix endianness warnings by adding the correct markers to unions.
- Add missing header inclusions for prototypes.
- Move nitrox_sriov_configure prototype into the isr header file.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change all lower case pci in comments to be upper case PCI.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The current NEON based ChaCha implementation for ARM is optimized for
multiples of 4x the ChaCha block size (64 bytes). This makes sense for
block encryption, but given that ChaCha is also often used in the
context of networking, it makes sense to consider arbitrary length
inputs as well.

For example, WireGuard typically uses 1420 byte packets, and performing
ChaCha encryption involves 5 invocations of chacha_4block_xor_neon()
and 3 invocations of chacha_block_xor_neon(), where the last one also
involves a memcpy() using a buffer on the stack to process the final
chunk of 1420 % 64 == 12 bytes.

Let's optimize for this case as well, by letting chacha_4block_xor_neon()
deal with any input size between 64 and 256 bytes, using NEON permutation
instructions and overlapping loads and stores. This way, the 140 byte
tail of a 1420 byte input buffer can simply be processed in one go.

This results in the following performance improvements for 1420 byte
blocks, without significant impact on power-of-2 input sizes. (Note
that Raspberry Pi is widely used in combination with a 32-bit kernel,
even though the core is 64-bit capable)

   Cortex-A8  (BeagleBone)       :   7%
   Cortex-A15 (Calxeda Midway)   :  21%
   Cortex-A53 (Raspberry Pi 3)   :   3%
   Cortex-A72 (Raspberry Pi 4)   :  19%

Cc: Eric Biggers <ebiggers@google.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove cast for mailbox CSR in adf_admin.c as it is not needed.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The extra tests in the manager actually require the manager to be
selected too. Otherwise the linker gives errors like:

ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor':
chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test'

Fixes: 2343d152 ("crypto: Kconfig - allow tests to be disabled when manager is disabled")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

At the time xts fallback tfm allocation fails the device struct
hasn't been enabled yet in the caam xts tfm's private context.

Fix this by using the device struct from xts algorithm's private context
or, when not available, by replacing dev_err with pr_err.

Fixes: 9d9b14db ("crypto: caam/jr - add fallback for XTS with more than 8B IV")
Fixes: 83e8aa91 ("crypto: caam/qi - add fallback for XTS with more than 8B IV")
Fixes: 36e2d7cf ("crypto: caam/qi2 - add fallback for XTS with more than 8B IV")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>