- 19 Jun, 2021 4 commits
-
-
Peter Robinson authored
Sort the rk3399 firefly pinmux entries in alphabetical order and de-dupe the pmic entries. Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20210613215237.830160-3-pbrobinson@gmail.comSigned-off-by:
Heiko Stuebner <heiko@sntech.de>
-
Peter Robinson authored
This adds the RK3399 Firefly’s infrared receiver to its dts. Signed-off-by:
-
Peter Robinson authored
This patch adds the SPDIF sound node and related settings for rk3399-firefly. Signed-off-by:
-
Chris Morgan authored
Add rotation property for Odroid Go Advance panel to note that it is rotated 270 degrees. Rotation affects DRM connector after this patch: https://cgit.freedesktop.org/drm/drm/commit/drivers/gpu/drm/panel/panel-elida-kd35t133.c?id=610d9c311b1387f8c4ac602fee1f2a1cb0508707Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20210614161849.332-1-macroalpha82@gmail.comSigned-off-by:
-
- 13 Jun, 2021 1 commit
-
-
Uwe Kleine-König authored
This enables the USB hardware needed to access devices on the sockets J1 and J13. Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210611081414.1448786-1-uwe@kleine-koenig.orgSigned-off-by:
-
- 03 Jun, 2021 3 commits
-
-
Tobias Schramm authored
The Rockchip RK3308 features an integrated USB 2.0 phy, an USB OTG controller and OHCI/EHCI interfaces. This patch adds all of those to the RK3308 dtsi and thereby enables USB support on the RK3308. Signed-off-by:
Tobias Schramm <t.schramm@manjaro.org> Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210601164800.7670-6-jbx6244@gmail.comSigned-off-by:
-
Johan Jonker authored
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$" in phy-provider.yaml has required "#phy-cells" for phy nodes. The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes. Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent notifications. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by:
-
Chris Morgan authored
Add the new rk817 codec driver to the Odroid Go Advance. Signed-off-by:
Maciej Matuszczyk <maccraft123mc@gmail.com> Link: https://lore.kernel.org/r/20210519203754.27184-5-macroalpha82@gmail.comSigned-off-by:
-
- 14 May, 2021 4 commits
-
-
Johan Jonker authored
A test with the command below gives this error: /arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: syscon@ff100000: grf-gpio: {'compatible': ['rockchip,rk3328-grf-gpio'], 'gpio-controller': True, '#gpio-cells': [[2]], 'phandle': [[68]]} is not of type 'array' Due to the regex "(?<!,nr)-gpios?$" anything that ends on '-gpio', '-gpios' gives a match. Rename 'grf-gpio' nodename to generic 'gpio' make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/ schemas/gpio/gpio-consumer.yaml Signed-off-by: -
Uwe Kleine-König authored
This is enough to make the SATA controller visible: # lspci 00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd RK3399 PCI Express Root Port 01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller Signed-off-by:
-
Uwe Kleine-König authored
On the helios64 board the two connectors P6 and P7 are supposed to power two fans. Add the corresponding pwm-fan devices. Signed-off-by:
-
Johan Jonker authored
A test with the command below gives this error: /arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml: sdmmcio-regulator: states:0: [1800000, 1, 3300000, 0] is too long dtbs_check expects regulator-gpio states in a format of 2 per item, so fix them all. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/ regulator/gpio-regulator.yaml Signed-off-by:
-
- 10 May, 2021 5 commits
-
-
Johan Jonker authored
Add #power-domain-cells to power domain nodes, because they are required by power-domain.yaml Signed-off-by:
-
Elaine Zhang authored
Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by:
Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Elaine Zhang authored
Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by:
-
Elaine Zhang authored
Use more generic names (as recommended in the device tree specification or the binding documentation) Signed-off-by:
-
Benjamin Gaignard authored
Remove useless interrupt-names properties for IOMMU nodes Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20210507090232.233049-6-benjamin.gaignard@collabora.comSigned-off-by:
-
- 09 May, 2021 19 commits
-
-
Johan Jonker authored
A test with the command below aimed at powerpc generates notifications in the Rockchip arm64 tree. Fix pinctrl "sleep" nodename by renaming it to "suspend" for rk3399.dtsi make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/powerpc/sleep.yaml Signed-off-by:
-
Peter Robinson authored
The max link speed supported by the rk3399 is already set in the rk3399.dtsi file so don't set unsupported link speeds in device specific DTs. This is the same fix as 642fb279. Signed-off-by:
-
Ezequiel Garcia authored
The timer driver requires pclk and sclk clocks to be present in the device tree node, so add them. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210506111136.3941-2-ezequiel@collabora.comSigned-off-by:
-
Chen-Yu Tsai authored
Turns out the fephy pins are already claimed in the phy node, which is rightfully where they should be claimed. Drop the pinctrl properties from the gmac2phy node for the ROCK Pi E. Fixes: b918e81f ("arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20210426095916.14574-1-wens@kernel.orgSigned-off-by:
-
Tianling Shen authored
However "sys" is not a valid function, and it is always on. Let's keep existing functions. Fixes: db792e9a ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S") Suggested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tianling Shen <cnsztl@gmail.com> Acked-by:
-
Chen-Yu Tsai authored
The NanoPi R2S has a Realtek RTL8153B USB 3.0 Ethernet chip connected to the USB 3.0 pins of the RK3328 SoC. Power to the chip is controlled by a GPIO line toggled transistor switch, which is not a full-blown voltage regulator. At least in Linux, the USB 3.0 XHCI controller has two ports: the first port is for legacy USB 2.0 and slower, while the second port is for USB 3.0. Since the Ethernet chip supports USB 3.0, it should be described as connected to the second port. Add the device nodes for the power switch and Ethernet chip, and enable the USB 3.0 controller. The USB device node follows the standard USB device binding. Signed-off-by:
-
Chen-Yu Tsai authored
Enable USB3 nodes for the Rock Pi E board. The VBUS regulator device node was added when the board was first introduced. Signed-off-by:
-
Chen-Yu Tsai authored
Enable USB3 nodes for the ROC-RK3328-CC board. The separate power regulator is not added as it is controlled by the same GPIO line as the existing VBUS regulators, so it is already enabled. Also there is no port representation to tie the regulator to. Signed-off-by:
-
Cameron Nemo authored
Enable USB3 nodes for the rk3328-based PINE Rock64 board. The separate power regulator is not added as it is controlled by the same GPIO line as the existing VBUS regulators, so it is already enabled. Also there is no port representation to tie the regulator to. [wens@csie.org: Rebased onto v5.12] Signed-off-by:
Cameron Nemo <cnemo@tutanota.com> [wens@csie.org: Rewrote commit message] Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Turns out the bio max size change still has issues, so let's get it reverted for 5.13-rc1. We'll shake out the issues there and defer it to 5.14 instead" * tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block: Revert "bio: limit bio max size"
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small SMB3 chmultichannel related changesets (also for stable) from the SMB3 test event this week. The other fixes are still in review/testing" * tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6: smb3: if max_channels set to more than one channel request multichannel smb3: do not attempt multichannel to server which does not support it smb3: when mounting with multichannel include it in requested capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of scheduler updates: - Prevent PSI state corruption when schedule() races with cgroup move. A recent commit combined two PSI callbacks to reduce the number of cgroup tree updates, but missed that schedule() can drop rq::lock for load balancing, which opens the race window for cgroup_move_task() which then observes half updated state. The fix is to solely use task::ps_flags instead of looking at the potentially mismatching scheduler state - Prevent an out-of-bounds access in uclamp caused bu a rounding division which can lead to an off-by-one error exceeding the buckets array size. - Prevent unfairness caused by missing load decay when a task is attached to a cfs runqueue. The old load of the task was attached to the runqueue and never removed. Fix it by enforcing the load update through the hierarchy for unthrottled run queue instances. - A documentation fix fot the 'sched_verbose' command line option" * tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unfairness caused by missing load decay sched: Fix out-of-bound access in uclamp psi: Fix psi state corruption when schedule() races with cgroup move sched,doc: sched_debug_verbose cmdline should be sched_verbose -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of locking related fixes and updates: - Two fixes for the futex syscall related to the timeout handling. FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and because it's not set the time namespace adjustment for clock MONOTONIC is applied wrongly. FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its always a relative timeout. - Cleanups in the futex syscall entry points which became obvious when the two timeout handling bugs were fixed. - Cleanup of queued_write_lock_slowpath() as suggested by Linus - Fixup of the smp_call_function_single_async() prototype" * tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Make syscall entry points less convoluted futex: Get rid of the val2 conditional dance futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op") locking/qrwlock: Cleanup queued_write_lock_slowpath() smp: Fix smp_call_function_single_async prototype -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Borislav Petkov: "Handle power-gating of AMD IOMMU perf counters properly when they are used" * tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A bunch of things accumulated for x86 in the last two weeks: - Fix guest vtime accounting so that ticks happening while the guest is running can also be accounted to it. Along with a consolidation to the guest-specific context tracking helpers. - Provide for the host NMI handler running after a VMX VMEXIT to be able to run on the kernel stack correctly. - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt relevant - real hw supports both) - A code generation improvement to TASK_SIZE_MAX through the use of alternatives - The usual misc and related cleanups and improvements" * tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: x86: Consolidate guest enter/exit logic to common helpers context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain context_tracking: Consolidate guest enter/exit wrappers sched/vtime: Move guest enter/exit vtime accounting to vtime.h sched/vtime: Move vtime accounting external declarations above inlines KVM: x86: Defer vtime accounting 'til after IRQ handling context_tracking: Move guest exit vtime accounting to separate helpers context_tracking: Move guest exit context tracking to separate helpers KVM/VMX: Invoke NMI non-IST entry instead of IST entry x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported x86/resctrl: Fix init const confusion x86: Delete UD0, UD1 traces x86/smpboot: Remove duplicate includes x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant -
Jens Axboe authored
This reverts commit cd2c7545. Alex reports that the commit causes corruption with LUKS on ext4. Revert it for now so that this can be investigated properly. Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/Reported-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 08 May, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid over-allocating the kernel's mapping on !MMU systems, which could lead to up to 2MiB of lost memory - The SiFive address extension errata only manifest on rv64, they are now disabled on rv32 where they are unnecessary - A pair of late-landing cleanups * tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove unused handle_exception symbol riscv: Consistify protect_kernel_linear_mapping_text_rodata() use riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y riscv: Only extend kernel reservation if mapped read-only
-
Linus Torvalds authored
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of the buffer, yet drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns about this case: drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’: drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread] 3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’} In file included from drivers/gpu/drm/i915/display/intel_dp.c:38: include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’ 1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], | ^~~~~~~~~~~~~~~~~~~~ 6:14 elapsed This commit just extends the original array by 2 zero-initialized bytes, avoiding the warning. There may be some underlying bug in here that caused this confusion, but this is at least no worse than the existing situation that could use random data off the stack. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes in various drivers (qla2xxx, ufs, scsi_debug, lpfc) one doc fix and a fairly large update to the fnic driver to remove the open coded iteration functions in favour of the scsi provided ones" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Use scsi_host_busy_iter() to traverse commands scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io() scsi: scsi_debug: Fix cmd_per_lun, set to max_queue scsi: ufs: core: Narrow down fast path in system suspend path scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend scsi: ufs: core: Do not put UFS power into LPM if link is broken scsi: qla2xxx: Prevent PRLI in target mode scsi: qla2xxx: Add marginal path handling support scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found scsi: ufs: core: Fix a typo in ufs-sysfs.c scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command scsi: lpfc: Fix DMA virtual address ptr assignment in bsg scsi: lpfc: Fix illegal memory access on Abort IOCBs scsi: blk-mq: Fix build warning when making htmldocs
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - Convert sh and sparc to use generic shell scripts to generate the syscall headers - refactor .gitignore files - Update kernel/config_data.gz only when the content of the .config is really changed, which avoids the unneeded re-link of vmlinux - move "remove stale files" workarounds to scripts/remove-stale-files - suppress unused-but-set-variable warnings by default for Clang as well - fix locale setting LANG=C to LC_ALL=C - improve 'make distclean' - always keep intermediate objects from scripts/link-vmlinux.sh - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained - misc cleanups * tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h> kbuild: Don't remove link-vmlinux temporary files on exit/signal kbuild: remove the unneeded comments for external module builds kbuild: make distclean remove tag files in sub-directories kbuild: make distclean work against $(objtree) instead of $(srctree) kbuild: refactor modname-multi by using suffix-search kbuild: refactor fdtoverlay rule kbuild: parameterize the .o part of suffix-search arch: use cross_compiling to check whether it is a cross build or not kbuild: remove ARCH=sh64 support from top Makefile .gitignore: prefix local generated files with a slash kbuild: replace LANG=C with LC_ALL=C Makefile: Move -Wno-unused-but-set-variable out of GCC only block kbuild: add a script to remove stale generated files kbuild: update config_data.gz only when the content of .config is changed .gitignore: ignore only top-level modules.builtin .gitignore: move tags and TAGS close to other tag files kernel/.gitgnore: remove stale timeconst.h and hz.bc usr/include: refactor .gitignore genksyms: fix stale comment ...
-
