- 14 May, 2024 4 commits
-
-
Zong-Zhe Yang authored
On 802.11be chips, to consider MLO, HW doesn't design number of support mac_id as large as before. And, it might be various according to chip. For example, old chips support mac_id up to 128, but RTL8922a only supports mac_id up to 32. Besides, the mac_id acquiring function will be extended when impending MLO support. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240509090646.35304-5-pkshih@realtek.com
-
Zong-Zhe Yang authored
For impending MLO support, we drop bss_info_changed callback ahead and switch to register new callbacks, vif_cfg_changed and link_info_changed, which are introduced by mac80211 for multi-link point of view. Besides, there is a place where we called ieee80211_find_sta() under station mode. To work on both non-MLD and MLD connection, we should call ieee80211_find_sta() with vif->cfg.ap_addr. Signed-off-by:
-
Zong-Zhe Yang authored
In original code architecture, sec CAM is a component of addr CAM. Hence, sec CAM could not be shared. After MLO, each link has its own addr CAM. However, one MLD PTK takes only one sec CAM but it needs to work on multiple links' addr CAMs. So, we now manage sec CAMs in global pool, and each of them is not bound to a single addr CAM now. before: +-----------------+ +--------------------+ | rtw89_{vif/sta} | ... | ieee80211_key_conf | +-----------------+ +--------------------+ ^ | V | hw_key_idx | | | V | +-- +----------+ addr_cam::key_idx | \ +---------+ | addr_cam |<>---------------------| |-------| sec_cam | +----------+ | / +---------+ +-- after: +----------------------+ +--------------------+ | rtw89_{vif/sta}_link | ... | ieee80211_key_conf | +----------------------+ +--------------------+ ^ | V | hw_key_idx | | | V | --+ +---------+ | +---------+ / | sec_cam_idx | global | | | sec_cam |-------| |----------------<>| sec_cam | | +---------+ \ | | pool | | ^ --+ +---------+ | | | (*) | +----------+ | | addr_cam |-------------+ +----------+ Signed-off-by: -
Zong-Zhe Yang authored
We did deinit CAM in STA iteration in VIF loop. But, the STA iteration missed to restrict the target VIF. So, if there are multiple VIFs, we would deinit a CAM multiple times. Now, fix it. Signed-off-by:
-
- 09 May, 2024 15 commits
-
-
Bitterblue Smith authored
When there is beacon loss, for example due to unrelated Bluetooth devices transmitting music nearby, the wifi connection dies soon after the first beacon loss message: Apr 28 20:47:14 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-BEACON-LOSS Apr 28 20:47:15 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-DISCONNECTED bssid=... reason=4 locally_generated=1 Apr 28 20:47:24 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-BEACON-LOSS Apr 28 20:47:25 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-DISCONNECTED bssid=... reason=4 locally_generated=1 Apr 28 20:47:34 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-BEACON-LOSS Apr 28 20:47:35 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-DISCONNECTED bssid=... reason=4 locally_generated=1 When the beacon loss happens, mac80211 makes rtw88 transmit a QOS NULL frame and asks to confirm the ACK status. Even though rtw88 confirms to mac80211 that the QOS NULL was transmitted successfully, the connection still dies. This is because rtw88 is handing the QOS NULL back to mac80211 with skb->data pointing to the headroom (the TX descriptor) instead of ieee80211_hdr. Fix the disconnection by moving skb->data to the correct position before ieee80211_tx_status_irqsafe(). The problem was observed with RTL8811AU (TP-Link Archer T2U Nano) and the potential future rtw88_8821au driver. Also tested with RTL8811CU (Tenda U9). Cc: stable@vger.kernel.org Signed-off-by:
Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by:
-
Bitterblue Smith authored
The skb created in this function always has the same headroom, the chip's TX descriptor size. (pkt_info->offset is set by rtw_usb_write_data_rsvd_page() to chip->tx_pkt_desc_sz.) Use chip->tx_pkt_desc_sz directly. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from the private struct by converting it into a pointer. Then use the leverage the new alloc_netdev_dummy() helper to allocate and initialize dummy devices. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ Tested with RTL8723DE and RTL8822CE. Signed-off-by:
Breno Leitao <leitao@debian.org> Acked-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from the private struct by converting it into a pointer. Then use the leverage the new alloc_netdev_dummy() helper to allocate and initialize dummy devices. [1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ Tested with RTL8852BE, RTL8852C and RTL8922AE. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.10 The third, and most likely the last, "new features" pull request for v6.10 with changes both in stack and in drivers. In ath12k and rtw89 we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi 7 devices will not support Wireless Extensions (WEXT) anymore so if someone is still using the legacy WEXT interface it's time to switch to nl80211 now! We merged wireless into wireless-next as we decided not to send a wireless pull request to v6.9 this late in the cycle. Also an immutable branch with MHI subsystem was merged to get ath11k and ath12k hibernation working. Major changes: mac80211/cfg80211 * handle color change per link mt76 * mt7921 LED control * mt7925 EHT radiotap support * mt7920e PCI support ath12k * debugfs support * dfs_simulate_radar debugfs file * disable Wireless Extensions * suspend and hibernation support * ACPI support * refactoring in preparation of multi-link support ath11k * support hibernation (required changes in qrtr and MHI subsystems) * ieee80211-freq-limit Device Tree property support ath10k * firmware-name Device Tree property support rtw89 * complete features of new WiFi 7 chip 8922AE including BT-coexistence and WoWLAN * use BIOS ACPI settings to set TX power and channels * disable Wireless Extensios on Wi-Fi 7 devices iwlwifi * block_esr debugfs file * support again firmware API 90 (was reverted earlier) * provide channel survey information for Automatic Channel Selection (ACS) * tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (214 commits) wifi: mwl8k: initialize cmd->addr[] properly wifi: iwlwifi: Ensure prph_mac dump includes all addresses wifi: iwlwifi: mvm: don't request statistics in restart wifi: iwlwifi: mvm: exit EMLSR if secondary link is not used wifi: iwlwifi: mvm: add beacon template version 14 wifi: iwlwifi: mvm: align UATS naming with firmware wifi: iwlwifi: Force SCU_ACTIVE for specific platforms wifi: iwlwifi: mvm: record and return channel survey information wifi: iwlwifi: mvm: add the firmware API for channel survey wifi: iwlwifi: mvm: Fix race in scan completion wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidth wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasons wifi: iwlwifi: mvm: Add active EMLSR blocking reasons prints wifi: iwlwifi: bump FW API to 90 for BZ/SC devices wifi: iwlwifi: mvm: fix primary link setting wifi: iwlwifi: mvm: use already determined cmd_id wifi: iwlwifi: mvm: don't reset link selection during restart wifi: iwlwifi: Print EMLSR states name wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active wifi: iwlwifi: mvm: fix typo in debug print ... ==================== Link: https://lore.kernel.org/r/20240508120726.85A10C113CC@smtp.kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
David Wei says: ==================== netdevsim: add NAPI support Add NAPI support to netdevsim and register its Rx queues with NAPI instances. Then add a selftest using the new netdev Python selftest infra to exercise the existing Netdev Netlink API, specifically the queue-get API. This expands test coverage and further fleshes out netdevsim as a test device. It's still my goal to make it useful for testing things like flow steering and ZC Rx. ==================== Link: https://lore.kernel.org/r/20240507163228.2066817-1-dw@davidwei.ukSigned-off-by:
-
David Wei authored
Add a selftest for netdev generic netlink. For now there is only a single test that exercises the `queue-get` API. The test works with netdevsim by default or with a real device by setting NETIF. Add a timeout param to cmd() since ethtool -L can take a long time on real devices. Signed-off-by:
David Wei <dw@davidwei.uk> Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.ukSigned-off-by:
-
David Wei authored
Add NAPI support to netdevim, similar to veth. * Add a nsim_rq rx queue structure to hold a NAPI instance and a skb queue. * During xmit, store the skb in the peer skb queue and schedule NAPI. * During napi_poll(), drain the skb queue and pass up the stack. * Add assoc between rxq and NAPI instance using netif_queue_set_napi(). Signed-off-by:
-
Willem de Bruijn authored
Run tools/testing/selftest/net/csum.c as part of drv-net. This binary covers multiple scenarios, based on arguments given, for both IPv4 and IPv6: - Accept UDP correct checksum - Detect UDP invalid checksum - Accept TCP correct checksum - Detect TCP invalid checksum - Transmit UDP: basic checksum offload - Transmit UDP: zero checksum conversion The test direction is reversed between receive and transmit tests, so that the NIC under test is always the local machine. In total this adds up to 12 testcases, with more to follow. For conciseness, I replaced individual functions with a function factory. Also detect hardware offload feature availability using Ethtool netlink and skip tests when either feature is off. This need may be common for offload feature tests and eventually deserving of a thin wrapper in lib.py. Missing are the PF_PACKET based send tests ('-P'). These use virtio_net_hdr to program hardware checksum offload. Which requires looking up the local MAC address and (harder) the MAC of the next hop. I'll have to give it some though how to do that robustly and where that code would belong. Tested: make -C tools/testing/selftests/ \ TARGETS="drivers/net drivers/net/hw" \ install INSTALL_PATH=/tmp/ksft cd /tmp/ksft sudo NETIF=ens4 REMOTE_TYPE=ssh \ REMOTE_ARGS="root@10.40.0.2" \ LOCAL_V4="10.40.0.1" \ REMOTE_V4="10.40.0.2" \ ./run_kselftest.sh -t drivers/net/hw:csum.py Signed-off-by:Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Eric Dumazet authored
route_dumpit() already relies on RCU, RTNL is not needed. Also change return value at the end of a dump. This allows NLMSG_DONE to be appended to the current skb at the end of a dump, saving a couple of recvmsg() system calls. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Remi Denis-Courmont <courmisch@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240507121748.416287-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Various ndo_set_config() methods can change dev->if_port dev->if_port is going to be read locklessly from rtnl_fill_link_ifmap(). Add corresponding WRITE_ONCE() on writer sides. Signed-off-by:
-
Eric Dumazet authored
There is no need to use this_cpu_ptr(dst_cache->cache) twice. Compiler is unable to optimize the second call, because of per-cpu constraints. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240507132717.627518-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
dst_cache->reset_ts is read or written locklessly, add READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by:
-
Donald Hunter authored
Add support for retrieving VFs as part of link info. For example: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \ --do getlink --json '{"ifi-index": 38, "ext-mask": ["vf", "skip-stats"]}' {'address': 'b6:75:91:f2:64:65', [snip] 'vfinfo-list': {'info': [{'broadcast': b'\xff\xff\xff\xff\xff\xff\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00', 'link-state': {'link-state': 'auto', 'vf': 0}, 'mac': {'mac': b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00', 'vf': 0}, 'rate': {'max-tx-rate': 0, 'min-tx-rate': 0, 'vf': 0}, 'rss-query-en': {'setting': 0, 'vf': 0}, 'spoofchk': {'setting': 0, 'vf': 0}, 'trust': {'setting': 0, 'vf': 0}, 'tx-rate': {'rate': 0, 'vf': 0}, 'vlan': {'qos': 0, 'vf': 0, 'vlan': 0}, 'vlan-list': {'info': [{'qos': 0, 'vf': 0, 'vlan': 0, 'vlan-proto': 0}]}}, {'broadcast': b'\xff\xff\xff\xff\xff\xff\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00', 'link-state': {'link-state': 'auto', 'vf': 1}, 'mac': {'mac': b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x00', 'vf': 1}, 'rate': {'max-tx-rate': 0, 'min-tx-rate': 0, 'vf': 1}, 'rss-query-en': {'setting': 0, 'vf': 1}, 'spoofchk': {'setting': 0, 'vf': 1}, 'trust': {'setting': 0, 'vf': 1}, 'tx-rate': {'rate': 0, 'vf': 1}, 'vlan': {'qos': 0, 'vf': 1, 'vlan': 0}, 'vlan-list': {'info': [{'qos': 0, 'vf': 1, 'vlan': 0, 'vlan-proto': 0}]}}]}, 'xdp': {'attached': 0}} Signed-off-by:Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240507103603.23017-1-donald.hunter@gmail.comSigned-off-by:
-
Alexandru Gagniuc authored
Add a compatible property specific to IPQ9574. This should be used along with the IPQ4019 compatible. This second compatible serves the same purpose as the ipq{5,6,8} compatibles. This is to indicate that the clocks properties are required. Signed-off-by:Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240507024758.2810514-1-mr.nuke.me@gmail.comSigned-off-by:
-
- 08 May, 2024 21 commits
-
-
Lukasz Majewski authored
Without this change the created netns instances are not cleared after this script execution. To fix this problem the cleanup_all_ns function from ../lib.sh is called. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Joel Granados authored
Remove the explicit call to "return" in the void ax25_ds_set_timer function that was introduced in 78a7b5db ("ax.25: x.25: Remove the now superfluous sentinel elements from ctl_table array"). Signed-off-by:
Joel Granados <j.granados@samsung.com> Signed-off-by:
-
Alexander Mikhalitsyn authored
Let's make all IPVS sysctls writtable even when network namespace is owned by non-initial user namespace. Let's make a few sysctls to be read-only for non-privileged users: - sync_qlen_max - sync_sock_size - run_estimation - est_cpulist - est_nice I'm trying to be conservative with this to prevent introducing any security issues in there. Maybe, we can allow more sysctls to be writable, but let's do this on-demand and when we see real use-case. This patch is motivated by user request in the LXC project [1]. Having this can help with running some Kubernetes [2] or Docker Swarm [3] workloads inside the system containers. Link: https://github.com/lxc/lxc/issues/4278 [1] Link: https://github.com/kubernetes/kubernetes/blob/b722d017a34b300a2284b890448e5a605f21d01e/pkg/proxy/ipvs/proxier.go#L103 [2] Link: https://github.com/moby/libnetwork/blob/3797618f9a38372e8107d8c06f6ae199e1133ae8/osl/namespace_linux.go#L682 [3] Cc: Julian Anastasov <ja@ssi.bg> Cc: Simon Horman <horms@verge.net.au> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Alexander Mikhalitsyn authored
Cc: Julian Anastasov <ja@ssi.bg> Cc: Simon Horman <horms@verge.net.au> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Suggested-by:
-
Christian Marangi authored
Currently the ipq806x dwmac driver is almost always used attached to the CPU port of a switch and phy-mode was always set to "rgmii" or "sgmii". Some device came up with a special configuration where the PHY is directly attached to the GMAC port and in those case phy-mode needs to be set to "rgmii-id" to make the PHY correctly work and receive packets. Since the driver supports only "rgmii" and "sgmii" mode, when "rgmii-id" (or variants) mode is set, the mode is rejected and probe fails. Add support also for these phy-modes to correctly setup PHYs that requires delay applied to tx/rx. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Oleksij Rempel authored
Enhance the error reporting mechanism in the switchdev framework to provide more informative and user-friendly error messages. Following feedback from users struggling to understand the implications of error messages like "failed (err=-28) to add object (id=2)", this update aims to clarify what operation failed and how this might impact the system or network. With this change, error messages now include a description of the failed operation, the specific object involved, and a brief explanation of the potential impact on the system. This approach helps administrators and developers better understand the context and severity of errors, facilitating quicker and more effective troubleshooting. Example of the improved logging: [ 70.516446] ksz-switch spi0.0 uplink: Failed to add Port Multicast Database entry (object id=2) with error: -ENOSPC (-28). [ 70.516446] Failure in updating the port's Multicast Database could lead to multicast forwarding issues. [ 70.516446] Current HW/SW setup lacks sufficient resources. This comprehensive update includes handling for a range of switchdev object IDs, ensuring that most operations within the switchdev framework benefit from clearer error reporting. Reviewed-by:Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Peilin He authored
Introduce a tracepoint for icmp_send, which can help users to get more detail information conveniently when icmp abnormal events happen. 1. Giving an usecase example: ============================= When an application experiences packet loss due to an unreachable UDP destination port, the kernel will send an exception message through the icmp_send function. By adding a trace point for icmp_send, developers or system administrators can obtain detailed information about the UDP packet loss, including the type, code, source address, destination address, source port, and destination port. This facilitates the trouble-shooting of UDP packet loss issues especially for those network-service applications. 2. Operation Instructions: ========================== Switch to the tracing directory. cd /sys/kernel/tracing Filter for destination port unreachable. echo "type==3 && code==3" > events/icmp/icmp_send/filter Enable trace event. echo 1 > events/icmp/icmp_send/enable 3. Result View: ================ udp_client_erro-11370 [002] ...s.12 124.728002: icmp_send: icmp_send: type=3, code=3. From 127.0.0.1:41895 to 127.0.0.1:6666 ulen=23 skbaddr=00000000589b167a Signed-off-by:Peilin He <he.peilin@zte.com.cn> Signed-off-by:
xu xin <xu.xin16@zte.com.cn> Reviewed-by:
Yunkai Zhang <zhang.yunkai@zte.com.cn> Cc: Yang Yang <yang.yang29@zte.com.cn> Cc: Liu Chun <liu.chun2@zte.com.cn> Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn> Reviewed-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
David S. Miller authored
Oleksij Rempel says: ==================== add DCB and DSCP support for KSZ switches This patch series is aimed at improving support for DCB (Data Center Bridging) and DSCP (Differentiated Services Code Point) on KSZ switches. The main goal is to introduce global DSCP and PCP (Priority Code Point) mapping support, addressing the limitation of KSZ switches not having per-port DSCP priority mapping. This involves extending the DSA framework with new callbacks for managing trust settings for global DSCP and PCP maps. Additionally, we introduce IEEE 802.1q helpers for default configurations, benefiting other drivers too. Change logs are in separate patches. Compared to v6 this series includes some new patches for DSCP global mapping support and QoS selftest script for KSZ9477 switches. ==================== Signed-off-by: -
Oleksij Rempel authored
Add tests covering following functionality on KSZ9477 switch family: - default port priority - global DSCP to Internal Priority Mapping - apptrust configuration This script was tested on KSZ9893R Signed-off-by:
-
Oleksij Rempel authored
Microchip KSZ and LAN variants do not have per port DSCP priority configuration. Instead there is a global DSCP mapping table. This patch provides write access to this global DSCP map. In case entry is "deleted", we map corresponding DSCP entry to a best effort prio, which is expected to be the default priority for all untagged traffic. Signed-off-by:
-
Oleksij Rempel authored
Some switches like Microchip KSZ variants do not support per port DSCP priority configuration. Instead there is a global DSCP mapping table. To handle it, we will accept set/del request to any of user ports to make global configuration and update dcb app entries for all other ports. Signed-off-by:
-
Oleksij Rempel authored
802.1P (PCP) and DiffServ (DSCP) are handled now by DCB code. Let it do all needed initial configuration. Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Oleksij Rempel authored
Init priority to queue mapping in the way as it shown in IEEE 802.1Q mapping example. Signed-off-by:
-
Oleksij Rempel authored
I tested ETS support on KSZ9893, so it should work other KSZ989X variants too, which was till not listed as support. With this change we now officially not support only ksz8 family of chips. Signed-off-by:
-
Oleksij Rempel authored
KSZ88X3 switches have different behavior on different ports: - It seems to be not possible to disable VLAN PCP classification on port 2. It means, as soon as mutliqueue support is enabled, frames with VLAN tag will get PCP prios. This behavior do not affect Port 1 - it is possible to disable PCP prios. - DSCP classification is not working on Port 2. Since there are still usable configuration combinations, I added some quirks to make sure user will get appropriate error message if not possible configuration is chosen. Signed-off-by: -
Oleksij Rempel authored
Add DCB support to configure app trust sources and default port priority. Following commands can be used for testing: dcb apptrust set dev lan1 order pcp dscp dcb app replace dev lan1 default-prio 3 Since it is not possible to configure DSCP-Prio mapping per port, this patch provide only ability to read switch global dscp-prio mapping and way to enable/disable app trust for DSCP. Signed-off-by:
-
Oleksij Rempel authored
KSZ88X3 switches support up to 4 queues. Rework ksz8795_set_prio_queue() to support KSZ8795 and KSZ88X3 families of switches. Per default, configure KSZ88X3 to use one queue, since it need special handling due to priority related errata. Errata handling is implemented in a separate patch. Signed-off-by:
-
Oleksij Rempel authored
IEEE 802.1q specification provides recommendation and examples which can be used as good default values for different drivers. This patch implements mapping examples documented in IEEE 802.1Q-2022 in Annex I "I.3 Traffic type to traffic class mapping" and IETF DSCP naming and mapping DSCP to Traffic Type inspired by RFC8325. This helpers will be used in followup patches for dsa/microchip DCB implementation. Signed-off-by:
-
Oleksij Rempel authored
Most of Microchip KSZ switches use Internal Priority Value associated with every frame. For example, it is possible to map any VLAN PCP or DSCP value to IPV and at the end, map IPV to a queue. Since amount of IPVs is not equal to amount of queues, add this information and make use of it in some functions. Signed-off-by:
-
Oleksij Rempel authored
Add DCB support to get/set trust configuration for different packet priority information sources. Some switch allow to chose different source of packet priority classification. For example on KSZ switches it is possible to configure VLAN PCP and/or DSCP sources. Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-05-06 (ice) This series contains updates to ice driver only. Paul adds support for additional E830 devices and adjusts naming for existing E830 devices. Marcin commonizes a couple of TC setup calls to reduce duplicated code. Mateusz adds ice_vsi_cfg_params into ice_vsi to consolidate info. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsi ice: Deduplicate tc action setup ice: update E830 device ids and comments ice: add additional E830 device ids ==================== Link: https://lore.kernel.org/r/20240506170827.948682-1-anthony.l.nguyen@intel.comSigned-off-by:
-
