- 27 Sep, 2013 38 commits
-
-
Grant Likely authored
commit 0640332e upstream. Any calls to dt_alloc() need to be zeroed. This is a temporary fix, but the allocation function itself needs to zero memory before returning it. This is a follow up to patch 9e401275, "of: fdt: fix memory initialization for expanded DT" which fixed one call site but missed another. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Acked-by:
Wladislav Wiebe <wladislav.kw@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergei Shtylyov authored
commit f936f9b6 upstream. I'm testing SH-Mobile SDHI driver in DMA mode with a new DMA controller using 'bonnie++' and getting DMA error after which the tmio_mmc_dma.c code falls back to PIO but all commands time out after that. It turned out that the fallback code calls tmio_mmc_enable_dma() with RX/TX channels already freed and pointers to them cleared, so that the function bails out early instead of clearing the DMA bit in the CTL_DMA_ENABLE register. The regression was introduced by commit 162f43e3 (mmc: tmio: fix a deadlock). Moving tmio_mmc_enable_dma() calls to the top of the PIO fallback code in tmio_mmc_start_dma_{rx|tx}() helps. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Alex Deucher authored
commit 118bdbd8 upstream. This LCD monitor (1280x1024 native) has a completely bogus detailed timing (640x350@70hz). User reports that 1280x1024@60 has waves so prefer 1280x1024@75. Manufacturer: MED Model: 7b8 Serial#: 99188 Year: 2005 Week: 5 EDID Version: 1.3 Analog Display Input, Input Voltage Level: 0.700/0.700 V Sync: Separate Max Image Size [cm]: horiz.: 34 vert.: 27 Gamma: 2.50 DPMS capabilities: Off; RGB/Color Display First detailed timing is preferred mode redX: 0.645 redY: 0.348 greenX: 0.280 greenY: 0.605 blueX: 0.142 blueY: 0.071 whiteX: 0.313 whiteY: 0.329 Supported established timings: 720x400@70Hz 640x480@60Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz Manufacturer's mask: 0 Supported standard timings: Supported detailed timing: clock: 25.2 MHz Image Size: 337 x 270 mm h_active: 640 h_sync: 688 h_sync_end 784 h_blank_end 800 h_border: 0 v_active: 350 v_sync: 350 v_sync_end 352 v_blanking: 449 v_border: 0 Monitor name: MD30217PG Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz Serial No: 501099188 EDID (in hex): 00ffffffffffff0034a4b80774830100 050f010368221b962a0c55a559479b24 125054afcf00310a0101010101018180 000000000000d60980a0205e63103060 0200510e1100001e000000fc004d4433 3032313750470a202020000000fd0038 4c1e530e000a202020202020000000ff 003530313039393138380a2020200078 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reported-by: friedrich@mailstation.de Signed-off-by:
-
Jan Kara authored
commit 17b7f7cf upstream. Refuse RW mount of isofs filesystem. So far we just silently changed it to RO mount but when the media is writeable, block layer won't notice this change and thus will think device is used RW and will block eject button of the drive. That is unexpected by users because for non-writeable media eject button works just fine. Userspace mount(8) command handles this just fine and retries mounting with MS_RDONLY set so userspace shouldn't see any regression. Plus any tool mounting isofs is likely confronted with the case of read-only media where block layer already refuses to mount the filesystem without MS_RDONLY set so our behavior shouldn't be anything new for it. Reported-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Libin authored
commit a8f531eb upstream. In collapse_huge_page() there is a race window between releasing the mmap_sem read lock and taking the mmap_sem write lock, so find_vma() may return NULL. So check the return value to avoid NULL pointer dereference. collapse_huge_page khugepaged_alloc_page up_read(&mm->mmap_sem) down_write(&mm->mmap_sem) vma = find_vma(mm, address) Signed-off-by:
Libin <huawei.libin@huawei.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Greg Thelen authored
commit 2bff24a3 upstream. A memory cgroup with (1) multiple threshold notifications and (2) at least one threshold >=2G was not reliable. Specifically the notifications would either not fire or would not fire in the proper order. The __mem_cgroup_threshold() signaling logic depends on keeping 64 bit thresholds in sorted order. mem_cgroup_usage_register_event() sorts them with compare_thresholds(), which returns the difference of two 64 bit thresholds as an int. If the difference is positive but has bit[31] set, then sort() treats the difference as negative and breaks sort order. This fix compares the two arbitrary 64 bit thresholds returning the classic -1, 0, 1 result. The test below sets two notifications (at 0x1000 and 0x81001000): cd /sys/fs/cgroup/memory mkdir x for x in 4096 2164264960; do cgroup_event_listener x/memory.usage_in_bytes $x | sed "s/^/$x listener:/" & done echo $$ > x/cgroup.procs anon_leaker 500M v3.11-rc7 fails to signal the 4096 event listener: Leaking... Done leaking pages. Patched v3.11-rc7 properly notifies: Leaking... 4096 listener:2013:8:31:14:13:36 Done leaking pages. The fixed bug is old. It appears to date back to the introduction of memcg threshold notifications in v2.6.34-rc1-116-g2e72b634 "memcg: implement memory thresholds" Signed-off-by:
Greg Thelen <gthelen@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Jie Liu authored
commit 28e8be31 upstream. Call fiemap ioctl(2) with given start offset as well as an desired mapping range should show extents if possible. However, we somehow figure out the end offset of mapping via 'mapping_end -= cpos' before iterating the extent records which would cause problems if the given fiemap length is too small to a cluster size, e.g, Cluster size 4096: debugfs.ocfs2 1.6.3 Block Size Bits: 12 Cluster Size Bits: 12 The extended fiemap test utility From David: https://gist.github.com/anonymous/6172331 # dd if=/dev/urandom of=/ocfs2/test_file bs=1M count=1000 # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 0 extents: # Logical Physical Length Flags ^^^^^ <-- No extent is shown In this case, at ocfs2_fiemap(): cpos == mapping_end == 1. Hence the loop of searching extent records was not executed at all. This patch remove the in question 'mapping_end -= cpos', and loops until the cpos is larger than the mapping_end as usual. # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 1 extents: # Logical Physical Length Flags 0: 0000000000000000 0000000056a01000 0000000006a00000 0000 Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Reported-by:
David Weber <wb@munzinger.de> Tested-by:
-
Alex Williamson authored
commit 3269ee0b upstream. At best the current code only seems to free the leaf pagetables and the root. If you're unlucky enough to have a large gap (like any QEMU guest with more than 3G of memory), only the first chunk of leaf pagetables are freed (plus the root). This is a massive memory leak. This patch re-writes the pagetable freeing function to use a recursive algorithm and manages to not only free all the pagetables, but does it without any apparent performance loss versus the current broken version. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Reviewed-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Felix Fietkau authored
commit a1191927 upstream. The watchdog device on the AR933x is connected to the AHB clock, however the current code uses the reference clock. Due to the wrong rate, the watchdog driver can't calculate correct register values for a given timeout value and the watchdog unexpectedly restarts the system. The code uses the wrong value since the initial commit 04225e1d (MIPS: ath79: add AR933X specific clock init) The patch fixes the code to use the correct clock rate to avoid the problem. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5777/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Andrzej Hajda authored
commit a19dec6e upstream. This patch fixes following error: include/media/v4l2-ctrls.h:193:15: error: field ‘_lock’ has incomplete type include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_lock’: include/media/v4l2-ctrls.h:570:2: error: implicit declaration of function ‘mutex_lock’ [-Werror=implicit-function-declaration] include/media/v4l2-ctrls.h: In function ‘v4l2_ctrl_unlock’: include/media/v4l2-ctrls.h:579:2: error: implicit declaration of function ‘mutex_unlock’ [-Werror=implicit-function-declaration] Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Vasily Titskiy authored
commit 9e0bf92c upstream. The DuoSense touchscreen device causes a 10 second timeout. This fix removes the delay. Signed-off-by:
Vasily Titskiy <qehgt0@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Kees Cook authored
commit be67b68d upstream. Defensively check that the field to be worked on is not NULL. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Jiri Kosina authored
commit 6c2794a2 upstream. Instead of using data from stack for DMA in hidinput_get_battery_property(), allocate the buffer dynamically. Reported-by:
Richard Ryniker <ryniker@alum.mit.edu> Reported-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Kees Cook authored
commit 875b4e37 upstream. A HID device could send a malicious feature report that would cause the ntrig HID driver to trigger a NULL dereference during initialization: [57383.031190] usb 3-1: New USB device found, idVendor=1b96, idProduct=0001 ... [57383.315193] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [57383.315308] IP: [<ffffffffa08102de>] ntrig_probe+0x25e/0x420 [hid_ntrig] CVE-2013-2896 Signed-off-by:
Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by:
-
Kees Cook authored
commit 43622021 upstream. The "Report ID" field of a HID report is used to build indexes of reports. The kernel's index of these is limited to 256 entries, so any malicious device that sets a Report ID greater than 255 will trigger memory corruption on the host: [ 1347.156239] BUG: unable to handle kernel paging request at ffff88094958a878 [ 1347.156261] IP: [<ffffffff813e4da0>] hid_register_report+0x2a/0x8b CVE-2013-2888 Signed-off-by:
-
Stefan Kriwanek authored
commit 06bb5219 upstream. Some devices of the "Speedlink VAD Cezanne" model need more aggressive fixing than already done. I made sure through testing that this patch would not interfere with the proper working of a device that is bug-free. (The driver drops EV_REL events with abs(val) >= 256, which are not achievable even on the highest laser resolution hardware setting.) Signed-off-by:
Stefan Kriwanek <mail@stefankriwanek.de> Signed-off-by:
-
Kees Cook authored
commit 412f3010 upstream. A HID device could send a malicious output report that would cause the pantherlord HID driver to write beyond the output report allocation during initialization, causing a heap overflow: [ 310.939483] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0003 ... [ 315.980774] BUG kmalloc-192 (Tainted: G W ): Redzone overwritten CVE-2013-2892 Signed-off-by:
-
Felix Fietkau authored
commit a1c781bb upstream. They are not implemented, and accessing them might trigger errors Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit e96542e5 upstream. Similar to a race condition that exists in the tx path, the hardware might re-read the 'next' pointer of a descriptor of the last completed frame. This only affects non-EDMA (pre-AR93xx) devices. To deal with this race, defer clearing and re-linking a completed rx descriptor until the next one has been processed. Signed-off-by:
-
Felix Fietkau authored
commit 026d5b07 upstream. Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Signed-off-by:
-
John W. Linville authored
commit 67d0cf50 upstream. The driver fails to check the results of DMA mapping in twp places, which results in the following warning: [ 28.078515] ------------[ cut here ]------------ [ 28.078529] WARNING: at lib/dma-debug.c:937 check_unmap+0x47e/0x930() [ 28.078533] bcma-pci-bridge 0000:0e:00.0: DMA-API: device driver failed to check map error[device address=0x00000000b5d60d6c] [size=1876 bytes] [mapped as single] [ 28.078536] Modules linked in: bnep bluetooth vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) ipv6 b43 brcmsmac rtl8192cu rtl8192c_common rtlwifi mac802 11 brcmutil cfg80211 snd_hda_codec_conexant rng_core snd_hda_intel kvm_amd snd_hda_codec ssb kvm mmc_core snd_pcm snd_seq snd_timer snd_seq_device snd k8temp cordic joydev serio_raw hwmon sr_mod sg pcmcia pcmcia_core soundcore cdrom i2c_nforce2 i2c_core forcedeth bcma snd_page_alloc autofs4 ext4 jbd2 mbcache crc1 6 scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_amd [ 28.078602] CPU: 1 PID: 2570 Comm: NetworkManager Tainted: G O 3.10.0-rc7-wl+ #42 [ 28.078605] Hardware name: Hewlett-Packard HP Pavilion dv2700 Notebook PC/30D6, BIOS F.27 11/27/2008 [ 28.078607] 0000000000000009 ffff8800bbb03ad8 ffffffff8144f898 ffff8800bbb03b18 [ 28.078612] ffffffff8103e1eb 0000000000000002 ffff8800b719f480 ffff8800b7b9c010 [ 28.078617] ffffffff824204c0 ffffffff81754d57 0000000000000754 ffff8800bbb03b78 [ 28.078622] Call Trace: [ 28.078624] <IRQ> [<ffffffff8144f898>] dump_stack+0x19/0x1b [ 28.078634] [<ffffffff8103e1eb>] warn_slowpath_common+0x6b/0xa0 [ 28.078638] [<ffffffff8103e2c1>] warn_slowpath_fmt+0x41/0x50 [ 28.078650] [<ffffffff8122d7ae>] check_unmap+0x47e/0x930 [ 28.078655] [<ffffffff8122de4c>] debug_dma_unmap_page+0x5c/0x70 [ 28.078679] [<ffffffffa04a808c>] dma64_getnextrxp+0x10c/0x190 [brcmsmac] [ 28.078691] [<ffffffffa04a9042>] dma_rx+0x62/0x240 [brcmsmac] [ 28.078707] [<ffffffffa0479101>] brcms_c_dpc+0x211/0x9d0 [brcmsmac] [ 28.078717] [<ffffffffa046d927>] ? brcms_dpc+0x27/0xf0 [brcmsmac] [ 28.078731] [<ffffffffa046d947>] brcms_dpc+0x47/0xf0 [brcmsmac] [ 28.078736] [<ffffffff81047dcc>] tasklet_action+0x6c/0xf0 --snip-- [ 28.078974] [<ffffffff813891bd>] SyS_sendmsg+0xd/0x20 [ 28.078979] [<ffffffff81455c24>] tracesys+0xdd/0xe2 [ 28.078982] ---[ end trace 6164d1a08148e9c8 ]--- [ 28.078984] Mapped at: [ 28.078985] [<ffffffff8122c8fd>] debug_dma_map_page+0x9d/0x150 [ 28.078989] [<ffffffffa04a9322>] dma_rxfill+0x102/0x3d0 [brcmsmac] [ 28.079001] [<ffffffffa047a13d>] brcms_c_init+0x87d/0x1100 [brcmsmac] [ 28.079010] [<ffffffffa046d851>] brcms_init+0x21/0x30 [brcmsmac] [ 28.079018] [<ffffffffa04786e0>] brcms_c_up+0x150/0x430 [brcmsmac] As the patch adds a new failure mechanism to dma_rxfill(). When I changed the comment at the start of the routine to add that information, I also polished the wording. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Brett Rudley <brudley@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: brcm80211-dev-list@broadcom.com Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Takashi Iwai authored
commit 83f72151 upstream. Toshiba Satellite C870 shows interrupt problems occasionally when certain mixer controls like "Mic Switch" is toggled. This seems worked around by not using MSI. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=833585Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mike Dyer authored
commit 85fa532b upstream. Bit 9 of PLL2,3 and 4 is reserved as '0'. The 24bit fractional part should be split across each register in 8bit chunks. Signed-off-by:
Mike Dyer <mike.dyer@md-soft.co.uk> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Tejun Heo authored
commit c34ac00c upstream. list_first_or_null() should test whether the list is empty and return pointer to the first entry if not in a RCU safe manner. It's broken in several ways. * It compares __kernel @__ptr with __rcu @__next triggering the following sparse warning. net/core/dev.c:4331:17: error: incompatible types in comparison expression (different address spaces) * It doesn't perform rcu_dereference*() and computes the entry address using container_of() directly from the __rcu pointer which is inconsitent with other rculist interface. As a result, all three in-kernel users - net/core/dev.c, macvlan, cgroup - are buggy. They dereference the pointer w/o going through read barrier. * While ->next dereference passes through list_next_rcu(), the compiler is still free to fetch ->next more than once and thus nullify the "__ptr != __next" condition check. Fix it by making list_first_or_null_rcu() dereference ->next directly using ACCESS_ONCE() and then use list_entry_rcu() on it like other rculist accessors. v2: Paul pointed out that the compiler may fetch the pointer more than once nullifying the condition check. ACCESS_ONCE() added on ->next dereference. v3: Restored () around macro param which was accidentally removed. Spotted by Paul. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Li Zefan <lizefan@huawei.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Hans de Goede authored
commit b4f17a48 upstream. While reading the config parsing code I noticed this check is missing, without this check config->desc.wTotalLength can end up with a value larger then the dev->rawdescriptors length for the config, and when userspace then tries to get the rawdescriptors bad things may happen. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Oliver Neukum authored
commit 6dd433e6 upstream. Both could want to submit the same URB. Some checks of the flag intended to prevent that were missing. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Daniel Mack authored
commit f375fc52 upstream. Commit 7e8d5cd9 ("USB: Add EHCI support for MX27 and MX31 based boards") introduced code that could potentially lead to a NULL pointer dereference on driver removal. Fix this by checking for the value of pdata before dereferencing it. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Johan Hovold authored
commit 3b716caf upstream. Fix endianess bugs in parallel-port code which caused corrupt control-requests to be issued on big-endian machines. Reported-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit d0bd9a41 upstream. The write_parport_reg_nonblock() function shouldn't sleep because it's called with spinlocks held. Signed-off-by:
-
Dan Carpenter authored
commit 2c4283ca upstream. In dt282x_ai_insn_read() we call this macro like: wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); return -ETIME;); Because the if statement doesn't have curly braces it means we always return -ETIME and the function never succeeds. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Jeff Layton authored
commit 73e216a8 upstream. Oleksii reported that he had seen an oops similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ipt_MASQUERADE xt_REDIRECT xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables carl9170 ath usb_storage f2fs nfnetlink_log nfnetlink md4 cifs dns_resolver hid_generic usbhid hid af_packet uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev rfcomm btusb bnep bluetooth qmi_wwan qcserial cdc_wdm usb_wwan usbnet usbserial mii snd_hda_codec_hdmi snd_hda_codec_realtek iwldvm mac80211 coretemp intel_powerclamp kvm_intel kvm iwlwifi snd_hda_intel cfg80211 snd_hda_codec xhci_hcd e1000e ehci_pci snd_hwdep sdhci_pci snd_pcm ehci_hcd microcode psmouse sdhci thinkpad_acpi mmc_core i2c_i801 pcspkr usbcore hwmon snd_timer snd_page_alloc snd ptp rfkill pps_core soundcore evdev usb_common vboxnetflt(O) vboxdrv(O)Oops#2 Part8 loop tun binfmt_misc fuse msr acpi_call(O) ipv6 autofs4 CPU: 0 PID: 21612 Comm: kworker/0:1 Tainted: G W O 3.10.1SIGN #28 Hardware name: LENOVO 2306CTO/2306CTO, BIOS G2ET92WW (2.52 ) 02/22/2013 Workqueue: cifsiod cifs_echo_request [cifs] task: ffff8801e1f416f0 ti: ffff880148744000 task.ti: ffff880148744000 RIP: 0010:[<ffffffff814dcc13>] [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP: 0000:ffff880148745b00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880148745b78 RCX: 0000000000000048 RDX: ffff880148745c90 RSI: ffff880181864a00 RDI: ffff880148745b78 RBP: ffff880148745c48 R08: 0000000000000048 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880181864a00 R13: ffff880148745c90 R14: 0000000000000048 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000088 CR3: 000000020c42c000 CR4: 00000000001407b0 Oops#2 Part7 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880148745b30 ffffffff810c4af9 0000004848745b30 ffff880181864a00 ffffffff81ffbc40 0000000000000000 ffff880148745c90 ffffffff810a5aab ffff880148745bc0 ffffffff81ffbc40 ffff880148745b60 ffffffff815a9fb8 Call Trace: [<ffffffff810c4af9>] ? finish_task_switch+0x49/0xe0 [<ffffffff810a5aab>] ? lock_timer_base.isra.36+0x2b/0x50 [<ffffffff815a9fb8>] ? _raw_spin_unlock_irqrestore+0x18/0x40 [<ffffffff810a673f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff815aa38f>] ? _raw_spin_unlock_bh+0x1f/0x30 [<ffffffff814dcc87>] kernel_sendmsg+0x37/0x50 [<ffffffffa081a0e0>] smb_send_kvec+0xd0/0x1d0 [cifs] [<ffffffffa081a263>] smb_send_rqst+0x83/0x1f0 [cifs] [<ffffffffa081ab6c>] cifs_call_async+0xec/0x1b0 [cifs] [<ffffffffa08245e0>] ? free_rsp_buf+0x40/0x40 [cifs] Oops#2 Part6 [<ffffffffa082606e>] SMB2_echo+0x8e/0xb0 [cifs] [<ffffffffa0808789>] cifs_echo_request+0x79/0xa0 [cifs] [<ffffffff810b45b3>] process_one_work+0x173/0x4a0 [<ffffffff810b52a1>] worker_thread+0x121/0x3a0 [<ffffffff810b5180>] ? manage_workers.isra.27+0x2b0/0x2b0 [<ffffffff810bae00>] kthread+0xc0/0xd0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 [<ffffffff815b199c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bad40>] ? kthread_create_on_node+0x120/0x120 Code: 84 24 b8 00 00 00 4c 89 f1 4c 89 ea 4c 89 e6 48 89 df 4c 89 60 18 48 c7 40 28 00 00 00 00 4c 89 68 30 44 89 70 14 49 8b 44 24 28 <ff> 90 88 00 00 00 3d ef fd ff ff 74 10 48 8d 65 e0 5b 41 5c 41 RIP [<ffffffff814dcc13>] sock_sendmsg+0x93/0xd0 RSP <ffff880148745b00> CR2: 0000000000000088 The client was in the middle of trying to send a frame when the server->ssocket pointer got zeroed out. In most places, that we access that pointer, the srv_mutex is held. There's only one spot that I see that the server->ssocket pointer gets set and the srv_mutex isn't held. This patch corrects that. The upstream bug report was here: https://bugzilla.kernel.org/show_bug.cgi?id=60557Reported-by:
Oleksii Shevchuk <alxchk@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Shawn Nematbakhsh authored
commit c8476fb8 upstream. If a USB controller with XHCI_RESET_ON_RESUME goes to runtime suspend, a reset will be performed upon runtime resume. Any previously suspended devices attached to the controller will be re-enumerated at this time. This will cause problems, for example, if an open system call on the device triggered the resume (the open call will fail). Note that this change is only relevant when persist_enabled is not set for USB devices. This patch should be backported to kernels as old as 3.0, that contain the commit c877b3b2 "xhci: Add reset on resume quirk for asrock p67 host". Signed-off-by:
Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Sarah Sharp authored
commit 52fb6125 upstream. The xHCI platform driver calls into usb_add_hcd to register the irq for its platform device. It does not want the xHCI generic driver to register an interrupt for it at all. The original code did that by setting the XHCI_BROKEN_MSI quirk, which tells the xHCI driver to not enable MSI or MSI-X for a PCI host. Unfortunately, if CONFIG_PCI is enabled, and CONFIG_USB_DW3 is enabled, the xHCI generic driver will attempt to register a legacy PCI interrupt for the xHCI platform device in xhci_try_enable_msi(). This will result in a bogus irq being registered, since the underlying device is a platform_device, not a pci_device, and thus the pci_device->irq pointer will be bogus. Add a new quirk, XHCI_PLAT, so that the xHCI generic driver can distinguish between a PCI device that can't handle MSI or MSI-X, and a platform device that should not have its interrupts touched at all. This quirk may be useful in the future, in case other corner cases like this arise. This patch should be backported to kernels as old as 3.9, that contain the commit 00eed9c8 "USB: xhci: correctly enable interrupts". Signed-off-by:
Yu Y Wang <yu.y.wang@intel.com> Tested-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Peter Maydell authored
commit 99f2b130 upstream. The SMAP register offsets in the versatile PCI controller code were all off by four. (This didn't have any observable bad effects because on this board PHYS_OFFSET is zero, and (a) writing zero to the flags register at offset 0x10 has no effect and (b) the reset value of the SMAP register is zero anyway, so failing to write SMAP2 didn't matter.) Signed-off-by:
Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Roger Pau Monne authored
commit 5f338d90 upstream. With the current implementation, the callback in the tail of the list can be added twice, because the check done in gnttab_request_free_callback is bogus, callback->next can be NULL if it is the last callback in the list. If we add the same callback twice we end up with an infinite loop, were callback == callback->next. Replace this check with a proper one that iterates over the list to see if the callback has already been added. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Matt Wilson <msw@amazon.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Anton Blanchard authored
commit 230aef7a upstream. Normally when we haven't implemented an alignment handler for a load or store instruction the process will be terminated. The alignment handler uses the DSISR (or a pseudo one) to locate the right handler. Unfortunately ldbrx and stdbrx overlap lfs and stfs so we incorrectly think ldbrx is an lfs and stdbrx is an stfs. This bug is particularly nasty - instead of terminating the process we apply an incorrect fixup and continue on. With more and more overlapping instructions we should stop creating a pseudo DSISR and index using the instruction directly, but for now add a special case to catch ldbrx/stdbrx. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Herbert Xu authored
commit 77dbd7a9 upstream. crypto_larval_lookup should only return a larval if it created one. Any larval created by another entity must be processed through crypto_larval_wait before being returned. Otherwise this will lead to a larval being killed twice, which will most likely lead to a crash. Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alan Stern authored
commit 984f1733 upstream. This patch fixes an out-of-bounds error in sd_read_cache_type(), found by Google's AddressSanitizer tool. When the loop ends, we know that "offset" lies beyond the end of the data in the buffer, so no Caching mode page was found. In theory it may be present, but the buffer size is limited to 512 bytes. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
- 14 Sep, 2013 2 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 5b5b3058, which was commit 660696d1 upstream. Paul Gortmaker <paul.gortmaker@windriver.com> writes: [this patch] introduces the following: arch/x86/kvm/emulate.c: In function ‘decode_operand’: arch/x86/kvm/emulate.c:3974:4: warning: passing argument 1 of ‘decode_register’ makes integer from pointer +without a cast [enabled by default] arch/x86/kvm/emulate.c:789:14: note: expected ‘u8’ but argument is of type ‘struct x86_emulate_ctxt *’ arch/x86/kvm/emulate.c:3974:4: warning: passing argument 2 of ‘decode_register’ makes pointer from integer +without a cast [enabled by default] arch/x86/kvm/emulate.c:789:14: note: expected ‘long unsigned int *’ but argument is of type ‘u8’ Based on the severity of the warnings above, I'm reasonably sure there will be some kind of runtime regressions due to this, but I stopped to investigate the warnings as soon as I saw them, before any run time testing. It happens because mainline v3.7-rc1~113^2~40 (dd856efa) does this: -static void *decode_register(u8 modrm_reg, unsigned long *regs, +static void *decode_register(struct x86_emulate_ctxt *ctxt, u8 modrm_reg, Since 660696d1 was only applied to stable 3.4, 3.8, and 3.9 -- and the prerequisite above is in 3.7+, the issue should be limited to 3.4.44+ Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
