- 13 Nov, 2017 17 commits
-
-
Bart Van Assche authored
The use_srq configfs attribute is created after it is read. Hence modify srpt_tpg_attrib_use_srq_store() such that this function switches dynamically between non-SRQ and SRQ mode. Reported-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
Introduce the helper function srpt_set_enabled(). Protect sport->enabled changes with sdev->mutex. Makes configfs writes into 'enabled' wait until all channel resources have been freed. Wait until channel release has finished during kernel module unload. Signed-off-by:
-
Bart Van Assche authored
Except for changing a BUG_ON() call into a WARN_ON_ONCE() call, this patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
The only functional change in this patch is in the srpt_add_one() error path: if allocating the ring buffer for the SRQ fails, fall back to non-SRQ mode instead of disabling SRP target functionality. Signed-off-by:
-
Mike Marciniszyn authored
IB and iWARP specs both spell out that posting a receive work request to a queue pair in the RESET state is an invalid operation and required to fail. Postpone posting receive work requests until after the transition to the INIT state. Fixes: commit dea26209 ("IB/srpt: Change default behavior from using SRQ to using RC") Signed-off-by:
-
Steve Wise authored
iw_cxgb4 has many BUG_ON()s that were left over from various enhancemnets made over the years. Almost all of them should just be removed. Some, however indicate a ULP usage error and can be handled w/o bringing down the system. If the condition cannot happen with correctly implemented cxgb4 sw/fw, then remove the BUG_ON. If the condition indicates a misbehaving ULP (like CQ overflows), add proper recovery logic. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Sriharsha Basavapatna authored
While adding a new gid, the driver currently does not return the context back to the stack. A subsequent del_gid() (e.g, when ip address is changed) doesn't find the right context in the driver and it ends up dropping that request. This results in the HW caching a stale gid entry and traffic fails because of that. Fix by returning the proper context in bnxt_re_add_gid(). Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by:
-
Sriharsha Basavapatna authored
In bnxt_qplib_process_qp_event(), for qp error events we look up the qp-handle and pass it for further processing. But we don't check if the handle is NULL. This could lead to a crash in the called functions when that qp-handle is dereferenced, if the qp is destroyed in the meantime. Fix this by checking for a valid qp-handle in that function. Signed-off-by:
-
Noa Osherovich authored
Struct mlx5_ib_striding_rq_caps was not aligned to 64 bit as it should have been. Add a 32 bit reserved field. Fixes: b4f34597 ('IB/mlx5: Expose multi-packet RQ capabilities') Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Parav Pandit authored
Since there is nothing done with non zero return value, such check is avoided. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Mark Bloch authored
Maximal message should be used as a limit to the max message payload allowed, without the headers. The ConnectX-3 check is done against this value includes the headers. When the payload is 4K this will cause the NIC to drop packets. Increase maximal message to 8K as workaround, this shouldn't change current behaviour because we continue to set the MTU to 4k. To reproduce; set MTU to 4296 on the corresponding interface, for example: ifconfig eth0 mtu 4296 (both server and client) On server: ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096 On client: ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096 Fixes: 6e0d733d ("IB/mlx4: Allow 4K messages for UD QPs") Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Guy Levi authored
Taking advantage of the optimization which was introduced in previous commit ("IB/mlx4: Use optimal numbers of MTT entries") to optimize the MTT usage for QP and CQ. Signed-off-by:Guy Levi <guyle@mellanox.com> Signed-off-by:
-
Guy Levi authored
Optimize the device performance by assigning multiple physical pages, which are contiguous, to a single MTT. As a result, the number of MTTs is reduced and in turn save cache misses of MTTs. Signed-off-by:
-
Majd Dibbiny authored
When working over a RoCE network, the UDP source port should be set only for statically connected QPs (RC, UC and XRC). Fixes: 2811ba51 ("IB/mlx5: Add RoCE fields to Address Vector") Signed-off-by:
-
Majd Dibbiny authored
The UMR's QP is created by calling mlx5_ib_create_qp directly, and therefore the send CQ and the recv CQ on the ibqp weren't assigned. Assign them right after calling the mlx5_ib_create_qp to assure that any access to those pointers will work as expected and won't crash the system as might happen as part of reset flow. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
-
Leon Romanovsky authored
Smatch tool reports the following error: drivers/infiniband/hw/cxgb4/qp.c:1886 c4iw_create_qp() error: we previously assumed 'ucontext' could be null (see line 1804) Cc: Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Leon Romanovsky authored
The Broadcom driver produces the following compilation warning drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_create_ah’: drivers/infiniband/hw/bnxt_re/ib_verbs.c:668:6: warning: variable ‘vlan_tag’ set but not used [-Wunused-but-set-variable] u16 vlan_tag; Let's remove it till vlan_tag will be implemented properly. Cc: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
- 10 Nov, 2017 22 commits
-
-
Noa Osherovich authored
Add the PCI write end padding flag to device_cap_flags enum and set it during mlx5_ib_query_device so it will be reported to user-space. During WQ/QP creation, set that capability for WQ/QP if user requested it and HW supports it. PCI write end padding modification is not supported for now. There's no such flag for a QP but for a WQ, create and modify use the same flag. Return an error if PCI write end padding flag is set during modify_wq. Signed-off-by:
-
Noa Osherovich authored
There are root complexes that are able to optimize their performance when incoming data is multiple full cache lines. PCI write end padding is the device's ability to pad the ending of incoming packets (scatter) to full cache line such that the last upstream write generated by an incoming packet will be a full cache line. Add a relevant entry to ib_device_cap_flags to report such capability of an RDMA device. Add the QP and WQ create flags: * A QP/WQ created with a scatter end padding flag will cause HW to pad the last upstream write generated by a packet to cache line. User should consider several factors before activating this feature: - In case of high CPU memory load (which may cause PCI back pressure in turn), if a large percent of the writes are partial cache line, this feature should be checked as an optional solution. - This feature might reduce performance if most packets are between one and two cache lines and PCIe throughput has reached its maximum capacity. E.g. 65B packet from the network port will lead to 128B write on PCIe, which may cause traffic on PCIe to reach high throughput. Signed-off-by:
-
Thomas Bogendoerfer authored
Following crash happens, if crc algorithm couldn't be allocated: [ 1087.989072] rdma_rxe: loaded [ 1097.855397] PCLMULQDQ-NI instructions are not detected. [ 1097.901220] rdma_rxe: failed to allocate crc algorithmi err:-2 [ 1097.901248] BUG: unable to handle kernel [ 1097.901249] NULL pointer dereference [ 1097.901250] at 0000000000000046 [...] Reason is that rxe->tfm is assigned the error return, which will then be used for crypto_free_shash() in rxe_cleanup. Fix by using a temporary variable and assigning it rxe->tfm after allocation succeeded. Fixes: cee2688e ("IB/rxe: Offload CRC calculation when possible") Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Below kernel crash is observed when Pkey security enforcement fails on received MADs. This issue is reported in [1]. ib_free_recv_mad() accesses the rmpp_list, whose initialization is needed before accessing it. When security enformcent fails on received MADs, MAD processing avoided due to security checks failed. OpenSM[3770]: SM port is down kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 kernel: IP: ib_free_recv_mad+0x44/0xa0 [ib_core] kernel: PGD 0 kernel: P4D 0 kernel: kernel: Oops: 0002 [#1] SMP kernel: CPU: 0 PID: 2833 Comm: kworker/0:1H Tainted: P IO 4.13.4-1-pve #1 kernel: Hardware name: Dell XS23-TY3 /9CMP63, BIOS 1.71 09/17/2013 kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] kernel: task: ffffa069c6541600 task.stack: ffffb9a729054000 kernel: RIP: 0010:ib_free_recv_mad+0x44/0xa0 [ib_core] kernel: RSP: 0018:ffffb9a729057d38 EFLAGS: 00010286 kernel: RAX: ffffa069cb138a48 RBX: ffffa069cb138a10 RCX: 0000000000000000 kernel: RDX: ffffb9a729057d38 RSI: 0000000000000000 RDI: ffffa069cb138a20 kernel: RBP: ffffb9a729057d60 R08: ffffa072d2d49800 R09: ffffa069cb138ae0 kernel: R10: ffffa069cb138ae0 R11: ffffa072b3994e00 R12: ffffb9a729057d38 kernel: R13: ffffa069d1c90000 R14: 0000000000000000 R15: ffffa069d1c90880 kernel: FS: 0000000000000000(0000) GS:ffffa069dba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000008 CR3: 00000011f51f2000 CR4: 00000000000006f0 kernel: Call Trace: kernel: ib_mad_recv_done+0x5cc/0xb50 [ib_core] kernel: __ib_process_cq+0x5c/0xb0 [ib_core] kernel: ib_cq_poll_work+0x20/0x60 [ib_core] kernel: process_one_work+0x1e9/0x410 kernel: worker_thread+0x4b/0x410 kernel: kthread+0x109/0x140 kernel: ? process_one_work+0x410/0x410 kernel: ? kthread_create_on_node+0x70/0x70 kernel: ? SyS_exit_group+0x14/0x20 kernel: ret_from_fork+0x25/0x30 kernel: RIP: ib_free_recv_mad+0x44/0xa0 [ib_core] RSP: ffffb9a729057d38 kernel: CR2: 0000000000000008 [1] : https://www.spinics.net/lists/linux-rdma/msg56190.html Fixes: 47a2b338 ("IB/core: Enforce security on management datagrams") Cc: stable@vger.kernel.org # 4.13+ Signed-off-by:
Chris Blake <chrisrblake93@gmail.com> Reviewed-by:
Hal Rosenstock <hal@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Chelsio cxgb4 HW is big-endian, hence there is need to properly annotate r2 and stag fields as __be32 and not __u32 to fix the following sparse warnings. drivers/infiniband/hw/cxgb4/qp.c:614:16: warning: incorrect type in assignment (different base types) expected unsigned int [unsigned] [usertype] r2 got restricted __be32 [usertype] <noident> drivers/infiniband/hw/cxgb4/qp.c:615:18: warning: incorrect type in assignment (different base types) expected unsigned int [unsigned] [usertype] stag got restricted __be32 [usertype] <noident> Cc: Steve Wise <swise@opengridcomputing.com> Signed-off-by: -
Guy Levi authored
In the modify QP handler the base_qpn_udp field in the RSS QPC is overwrite later by irrelevant value assignment. Hence, ingress packets which gets to the RSS QP will be steered then to a garbage QPN. The patch fixes this by skipping the above assignment when a RSS QP is modified, also, the RSS context's attributes assignments are relocated just before the context is posted to avoid future issues like this. Additionally, this patch takes the opportunity to change the code to be disciplined to the device's manual and assigns the RSS QP context just at RESET to INIT transition. Fixes:3078f5f1 ("IB/mlx4: Add support for RSS QP") Signed-off-by:
-
Guy Levi authored
The mlx4's RSS patches submission missed a report of RSS capabilities which should be reported by the vendor channel in query_device. Signed-off-by:
-
Leon Romanovsky authored
The RDMA/umem uses generic RB-trees macros to generate various ib_umem access functions. The generation is performed with INTERVAL_TREE_DEFINE macro, which allows one of two modes: declare all functions as static or declare none of the function to be static. The second mode of operation produces the following sparse errors: drivers/infiniband/core/umem_rbtree.c:69:1: warning: symbol 'rbt_ib_umem_iter_first' was not declared. Should it be static? drivers/infiniband/core/umem_rbtree.c:69:1: warning: symbol 'rbt_ib_umem_iter_next' was not declared. Should it be static? Code relocation together with declaration of such functions to be "static" solves the issue. Because there is no need to have separate file for two functions, let's consolidate umem_rtree.c and umem_odp.c into one file. Signed-off-by:
-
oulijun authored
The cmd_sn field of CQ doorbell inits for 0. It should be increment on each first db rung after a completion Event. if the cmd_sn of notify doorbell Adjacent two times is the same, the hardware will distinguish it for the same notify request and update its type according to the priority level of next event and solicited event. Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
oulijun authored
The calculation of hem index are different between hns_roce_table_get and hns_roce_table_find. When the table chunk size of TRRL is not divisible by object size, it will faile to find the trrl table. This patch is to update the calculation of the hem index in the hns_roce_table_find to the same as which in the hns_roce_table_get. Signed-off-by:
Shaobo Xu <xushaobo2@huawei.com> Signed-off-by:
-
oulijun authored
the owner need to be set when posting sqwqe in hip08 RoCE. The owner be used according to the below algorithm: The value of owner should be 1 in the first lap, it should be 0 in the second lap and in turn. Signed-off-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
oulijun authored
In hip08 RoCE, it need to add the sq_invld_flg field in QP context for RoCE hardware. Signed-off-by:
-
oulijun authored
The ack timeout's value in qp context shall be a 5-bit value and be assgined by users. When at of qpc is set zero, the timer is disabled. When attr_mask set for IB_QP_TIMEOUT, The ack timeout field is effective. Signed-off-by:
-
oulijun authored
If the extend sges exist, the sq_cur_sge_blk_addr field in QPC (qp context) should be configured. Signed-off-by:
-
oulijun authored
When sig_type of qpc is non-selectable, all sq's wqes will produce cqe and not depend on the cqe attribute of wqe. When sig_type of qpc is selectable, The cqe attribute of wqe will decide whether to produce the cqe. Signed-off-by:
-
oulijun authored
When send flags is IB_SEND_SOLICITED, the se(solicated event) field of sqwqe will be set. Signed-off-by:
-
oulijun authored
When post wr for mixed rdma operation, we need to use fence mechanism to keep the correct execute order. Signed-off-by:
-
oulijun authored
The TRRL(Target RDMA Read/aTOMIC List) record the information of receiving RDMA READ or ATOMIC operation in hip08. It will be used the hardware. The driver need to assign a continuous physical address for trrl_ba field of qp context. Signed-off-by:
-
oulijun authored
The irrl(initiator RDMA Read/Atomic list) base address of qp context is assigned for addr[63:6]. This patch mainly fixed it. Signed-off-by:
-
Wei Hu(Xavier) authored
The hardware vendors need to generate RoCEv1 or RoCEv2 packet according to the sgid type configured. Besides, update the gid table size for hip08 RoCE device. Signed-off-by:
-
Wei Hu(Xavier) authored
HNS_ROCE_CAP_FALG_ROCE_V1_V2 is added for selecting capability of RoCE in hns driver. When HNS_ROCE_CAP_FALG_ROCE_V1_V2 is set, driver will inform ib core that the related hns device can support RoCEv2, and ib core can generate the gid of the related type. Signed-off-by:
-
Wei Hu(Xavier) authored
This patch adds rereg mr support for hip08. Signed-off-by:
-
- 01 Nov, 2017 1 commit
-
-
Doug Ledford authored
Pick up the missing netlink oops fix Signed-off-by:
-
