Proc temporary uses stats from init_net.

BTW, TCP_XXX_STATS are beautiful (w/o do { } while (0) facing) again :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

These ones are currently empty, but stuff from init_ipv4_mibs will
sequentially migrate there.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only structure declared within is the netns_mib, which will
carry all our mibs within. I didn't put the mibs in the existing
netns_xxx structures to make it possible to mark this one as
properly aligned and get in a separate "read-mostly" cache-line.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 94d98424.

Alan says it's not appropriate to remove this driver,
Adrian Bunk also agrees with this revert.
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c

Instead of 'pfifo_fast' we have just plain 'fifo_fast'.
No priority queues, just a straight FIFO.

This is necessary in order to legally have a seperate
qdisc per queue in multi-TX-queue setups, and thus get
full parallelization.
Signed-off-by: David S. Miller <davem@davemloft.net>

We have to have exclusive access to the given qdisc anyways, so
doing even more locking is superfluous.
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the destruction of the old queue into qdisc_graft().

When operating on a root qdisc (ie. "parent == NULL"), apply
the operation to all queues.  The caller has grabbed a single
implicit reference for this graft, therefore when we apply the
change to more than one queue we must grab additional qdisc
references.

Otherwise, we are operating on a class of a specific parent qdisc, and
therefore no multiqueue handling is necessary.
Signed-off-by: David S. Miller <davem@davemloft.net>

We can simply use the qdisc->q.lock for all of the
qdisc tree synchronization.
Signed-off-by: David S. Miller <davem@davemloft.net>

No longer used.
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sch_tree_lock() lock the qdisc's root.  All of the
users hold the RTNL semaphore and the root qdisc is not
changing.

Implement tbf_tree_{lock,unlock}() simply in terms of
sch_tree_{lock,unlock}().
Signed-off-by: David S. Miller <davem@davemloft.net>

Lock the root of the qdisc being operated upon.

All explicit references to qdisc_tree_lock() are now gone.
The only remaining uses are via the sch_tree_{lock,unlock}()
and tcf_tree_{lock,unlock}() macros.
Signed-off-by: David S. Miller <davem@davemloft.net>

And give it it's own lock.
Signed-off-by: David S. Miller <davem@davemloft.net>

It just wants the qdisc tree to be synchronized, so grabbing
qdisc_root_lock() is sufficient.
Signed-off-by: David S. Miller <davem@davemloft.net>

It just wants the qdisc tree for the filter to be synchronized.
So just BH lock qdisc_root_lock(q) instead.
Signed-off-by: David S. Miller <davem@davemloft.net>

This eliminates another qdisc_lock_tree user.
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows less strict control of access to the qdisc attached to a
netdev_queue.  It is even allowed to enqueue into a qdisc which is
in the process of being destroyed.  The RCU handler will toss out
those packets.

We will need this to handle sharing of a qdisc amongst multiple
TX queues.  In such a setup the lock has to be shared, so will
be inside of the qdisc itself.  At which point the netdev_queue
lock cannot be used to hard synchronize access to the ->qdisc
pointer.

One operation we have to keep inside of qdisc_destroy() is the list
deletion.  It is the only piece of state visible after the RCU quiesce
period, so we have to undo it early and under the appropriate locking.

The operations in the RCU handler do not need any looking because the
qdisc tree is no longer visible to anything at that point.
Signed-off-by: David S. Miller <davem@davemloft.net>

We are registering the device, there is no way anyone can get
at this object's qdiscs yet in any meaningful way.
Signed-off-by: David S. Miller <davem@davemloft.net>

When we have shared qdiscs, packets come out of the qdiscs
for multiple transmit queues.

Therefore it doesn't make any sense to schedule the transmit
queue when logically we cannot know ahead of time the TX
queue of the SKB that the qdisc->dequeue() will give us.

Just for sanity I added a BUG check to make sure we never
get into a state where the noop_qdisc is scheduled.
Signed-off-by: David S. Miller <davem@davemloft.net>

When code wants to lock the qdisc tree state, the logic
operation it's doing is locking the top-level qdisc that
sits of the root of the netdev_queue.

Add qdisc_root_lock() to represent this and convert the
easiest cases.

In order for this to work out in all cases, we have to
hook up the noop_qdisc to a dummy netdev_queue.
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently it is associated with a netdev_queue, but when we have
qdisc sharing that no longer makes any sense.
Signed-off-by: David S. Miller <davem@davemloft.net>

We liberate any dangling gso_skb during qdisc destruction.

It really only matters for the root qdisc.  But when qdiscs
can be shared by multiple netdev_queue objects, we can't
have the gso_skb in the netdev_queue any more.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

No more users.
Signed-off-by: David S. Miller <davem@davemloft.net>

They logically all want to trigger a schedule for all device
TX queues.
Signed-off-by: David S. Miller <davem@davemloft.net>

It just xor hashes over IPv4/IPv6 addresses and ports of transport.

The only assumption it makes is that skb_network_header() is set
correctly.

With bug fixes from Eric Dumazet.
Signed-off-by: David S. Miller <davem@davemloft.net>

The only behavior change is that we do not drop packets under any
circumstances.  If that is absolutely needed, we could easily add it
back.

With cleanups and help from Johannes Berg.
Signed-off-by: David S. Miller <davem@davemloft.net>

Devices or device layers can set this to control the queue selection
performed by dev_pick_tx().

This function runs under RCU protection, which allows overriding
functions to have some way of synchronizing with things like dynamic
->real_num_tx_queues adjustments.

This makes the spinlock prefetch in dev_queue_xmit() a little bit
less effective, but that's the price right now for correctness.
Signed-off-by: David S. Miller <davem@davemloft.net>

The private area of a netdev is now at a fixed offset once more.

Unfortunately, some assumptions that netdev_priv() == netdev->priv
crept back into the tree.  In particular this happened in the
loopback driver.  Make it use netdev->ml_priv.
Signed-off-by: David S. Miller <davem@davemloft.net>

No longer used.
Signed-off-by: David S. Miller <davem@davemloft.net>

This effectively "flips the switch" by making the core networking
and multiqueue-aware drivers use the new TX multiqueue structures.

Non-multiqueue drivers need no changes.  The interfaces they use such
as netif_stop_queue() degenerate into an operation on TX queue zero.
So everything "just works" for them.

Code that really wants to do "X" to all TX queues now invokes a
routine that does so, such as netif_tx_wake_all_queues(),
netif_tx_stop_all_queues(), etc.

pktgen and netpoll required a little bit more surgery than the others.

In particular the pktgen changes, whilst functional, could be largely
improved.  The initial check in pktgen_xmit() will sometimes check the
wrong queue, which is mostly harmless.  The thing to do is probably to
invoke fill_packet() earlier.

The bulk of the netpoll changes is to make the code operate solely on
the TX queue indicated by by the SKB queue mapping.

Setting of the SKB queue mapping is entirely confined inside of
net/core/dev.c:dev_pick_tx().  If we end up needing any kind of
special semantics (drops, for example) it will be implemented here.

Finally, we now have a "real_num_tx_queues" which is where the driver
indicates how many TX queues are actually active.

With IGB changes from Jeff Kirsher.
Signed-off-by: David S. Miller <davem@davemloft.net>

We will undo this after a few changsets.
Signed-off-by: David S. Miller <davem@davemloft.net>

This actually fixes a bug added by the RR scheduler changes.  The
->bands and ->prio2band parameters were being set outside of the
sch_tree_lock() and thus could result in strange behavior and
inconsistencies.

It might be possible, in the new design (where there will be one qdisc
per device TX queue) to allow similar functionality via a TX hash
algorithm for RR but I really see no reason to export this aspect of
how these multiqueue cards actually implement the scheduling of the
the individual DMA TX rings and the single physical MAC/PHY port.
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need for a feature bit for something that
can be tested by simply checking the TX queue count.
Signed-off-by: David S. Miller <davem@davemloft.net>

alloc_netdev_mq() now allocates an array of netdev_queue
structures for TX, based upon the queue_count argument.

Furthermore, all accesses to the TX queues are now vectored
through the netdev_get_tx_queue() and netdev_for_each_tx_queue()
interfaces.  This makes it easy to grep the tree for all
things that want to get to a TX queue of a net device.

Problem spots which are not really multiqueue aware yet, and
only work with one queue, can easily be spotted by grepping
for all netdev_get_tx_queue() calls that pass in a zero index.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  [PATCH] ocfs2: fix oops in mmap_truncate testing
  configfs: call drop_link() to cleanup after create_link() failure
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  configfs: Fix failing mkdir() making racing rmdir() fail
  configfs: Fix deadlock with racing rmdir() and rename()
  configfs: Make configfs_new_dirent() return error code instead of NULL
  configfs: Protect configfs_dirent s_links list mutations
  configfs: Introduce configfs_dirent_lock
  ocfs2: Don't snprintf() without a format.
  ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
  ocfs2/net: Silence build warnings on sparc64
  ocfs2: Handle error during journal load
  ocfs2: Silence an error message in ocfs2_file_aio_read()
  ocfs2: use simple_read_from_buffer()
  ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
  [PATCH 2/2] ocfs2: Instrument fs cluster locks
  [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
  pcmcia: ide-cs: Remove outdated comment
  pcmcia: fix cisinfo_t removal
  pcmcia: fix return value in cm4000_cs.c

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix asm/e820.h for userspace inclusion
  x86: fix numaq_tsc_disable
  x86: fix kernel_physical_mapping_init() for large x86 systems

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: do not trace library functions
  ftrace: do not trace scheduler functions
  ftrace: fix lockup with MAXSMP
  ftrace: fix merge buglet