* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  ARM: mach-shmobile: specify CHCLR registers on SH7372
  dma: shdma: fix runtime PM: clear channel buffers on reset
  dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit
  dmaengine/ste_dma40: clear LNK on channel startup
  dmaengine: intel_mid_dma: remove legacy pm interface
  ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
  dmaengine: intel_mid_dma: error path fix
  dmaengine: intel_mid_dma: locking and freeing fixes
  mtd: gpmi-nand: move to dma_transfer_direction
  mtd: fix compile error for gpmi-nand
  mmc: mxs-mmc: fix the dma_transfer_direction migration
  dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
  dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
  dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe
  dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
  dma: mxs-dma: fix a typo in comment
  DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
  video i.MX IPU: Fix display connections
  i.MX IPU DMA: Fix wrong burstsize settings
  dmaengine/ste_dma40: allow fixed physical channel
  ...

Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c}

The conflicts looked pretty trivial, but I'll ask people to verify them.

* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
  [libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to broken suspend functionality.
  [libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list
  [libata] pata_bf54x: Support sg list in bmdma transfer.
  [libata] sata_fsl: fix the controller operating mode
  [libata] enable ata port async suspend

JONGMAN HEO reports:

  With current linus git (commit a25a2b84), I got following build error,

  arch/x86/kernel/vm86_32.c: In function 'do_sys_vm86':
  arch/x86/kernel/vm86_32.c:340: error: implicit declaration of function '__audit_syscall_exit'
  make[3]: *** [arch/x86/kernel/vm86_32.o] Error 1

OK, I can reproduce it (32bit allmodconfig with AUDIT=y, AUDITSYSCALL=n)

It's due to commit d7e7528b: "Audit: push audit success and retcode
into arch ptrace.h".
Reported-by: JONGMAN HEO <jongman.heo@samsung.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

due to broken suspend functionality.
Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered
in one ATAPI transfer. So, set the max sg_tablesize to 4.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Configure the FSL SATA controller to the preferred, enterprise mode.
Signed-off-by: Yutaka Ando <r46913@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This saves devices suspend/resume time.

Tested system suspend/resume with SATA IDE/AHCI mode 3 times.
Below is the time took for devices suspend/resume.

SATA mode    vanilla-kernel           patched-kernel
---------    ---------------------    ---------------------
IDE          suspend: 0.744           suspend: 0.432
             (0.716, 0.768, 0.748)    (0.440, 0.428, 0.428)

             resume: 5.084            resume: 2.209
             (5.100, 5.064, 5.088)    (2.168, 2.232, 2.228)

AHCI:        suspend: 0.725           suspend: 0.449
             (0.740, 0.708, 0.728)    (0.456, 0.448, 0.444)

             resume: 2.556            resume: 1.896
             (2.604, 2.492, 2.572)    (1.932, 1.872, 1.884)
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  integrity: digital signature config option name change
  lib: Removed MPILIB, MPILIB_EXTRA, and SIGNATURE prompts
  lib: MPILIB Kconfig description update
  lib: digital signature dependency fix
  lib: digital signature config option name change
  encrypted-keys: fix rcu and sparse messages
  keys: fix trusted/encrypted keys sparse rcu_assign_pointer messages
  KEYS: Add missing smp_rmb() primitives to the keyring search code
  TOMOYO: Accept \000 as a valid character.
  security: update MAINTAINERS file with new git repo

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit: (29 commits)
  audit: no leading space in audit_log_d_path prefix
  audit: treat s_id as an untrusted string
  audit: fix signedness bug in audit_log_execve_info()
  audit: comparison on interprocess fields
  audit: implement all object interfield comparisons
  audit: allow interfield comparison between gid and ogid
  audit: complex interfield comparison helper
  audit: allow interfield comparison in audit rules
  Kernel: Audit Support For The ARM Platform
  audit: do not call audit_getname on error
  audit: only allow tasks to set their loginuid if it is -1
  audit: remove task argument to audit_set_loginuid
  audit: allow audit matching on inode gid
  audit: allow matching on obj_uid
  audit: remove audit_finish_fork as it can't be called
  audit: reject entry,always rules
  audit: inline audit_free to simplify the look of generic code
  audit: drop audit_set_macxattr as it doesn't do anything
  audit: inline checks for not needing to collect aux records
  audit: drop some potentially inadvisable likely notations
  ...

Use evil merge to fix up grammar mistakes in Kconfig file.

Bad speling and horrible grammar (and copious swearing) is to be
expected, but let's keep it to commit messages and comments, rather than
expose it to users in config help texts or printouts.

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: cleanup xfs_file_aio_write
  xfs: always return with the iolock held from xfs_file_aio_write_checks
  xfs: remove the i_new_size field in struct xfs_inode
  xfs: remove the i_size field in struct xfs_inode
  xfs: replace i_pin_wait with a bit waitqueue
  xfs: replace i_flock with a sleeping bitlock
  xfs: make i_flags an unsigned long
  xfs: remove the if_ext_max field in struct xfs_ifork
  xfs: remove the unused dm_attrs structure
  xfs: cleanup xfs_iomap_eof_align_last_fsb
  xfs: remove xfs_itruncate_data

* 'btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  btrfs: take allocation of ->tree_root into open_ctree()
  btrfs: let ->s_fs_info point to fs_info, not root...
  btrfs: consolidate failure exits in btrfs_mount() a bit
  btrfs: make free_fs_info() call ->kill_sb() unconditional
  btrfs: merge free_fs_info() calls on fill_super failures
  btrfs: kill pointless reassignment of ->s_fs_info in btrfs_fill_super()
  btrfs: make open_ctree() return int
  btrfs: sanitizing ->fs_info, part 5
  btrfs: sanitizing ->fs_info, part 4
  btrfs: sanitizing ->fs_info, part 3
  btrfs: sanitizing ->fs_info, part 2
  btrfs: sanitizing ->fs_info, part 1
  btrfs: fix a deadlock in btrfs_scan_one_device()
  btrfs: fix mount/umount race
  btrfs: get ->kill_sb() of its own
  btrfs: preparation to fixing mount/umount race

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits)
  Btrfs: use larger system chunks
  Btrfs: add a delalloc mutex to inodes for delalloc reservations
  Btrfs: space leak tracepoints
  Btrfs: protect orphan block rsv with spin_lock
  Btrfs: add allocator tracepoints
  Btrfs: don't call btrfs_throttle in file write
  Btrfs: release space on error in page_mkwrite
  Btrfs: fix btrfsck error 400 when truncating a compressed
  Btrfs: do not use btrfs_end_transaction_throttle everywhere
  Btrfs: add balance progress reporting
  Btrfs: allow for resuming restriper after it was paused
  Btrfs: allow for canceling restriper
  Btrfs: allow for pausing restriper
  Btrfs: add skip_balance mount option
  Btrfs: recover balance on mount
  Btrfs: save balance parameters to disk
  Btrfs: soft profile changing mode (aka soft convert)
  Btrfs: implement online profile changing
  Btrfs: do not reduce profile in do_chunk_alloc()
  Btrfs: virtual address space subset filter
  ...

Fix up trivial conflict in fs/btrfs/ioctl.c due to the use of the new
mnt_drop_write_file() helper.

Similar to SIGNATURE, rename INTEGRITY_DIGSIG to INTEGRITY_SIGNATURE.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>

As modules are expected to select MPILIB, MPILIB_EXTRA, and SIGNATURE,
removed Kconfig prompts.
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>

It was reported that description of the MPILIB_EXTRA is confusing.
Indeed it was copy-paste typo. It is fixed here.
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>

Randy Dunlap reported build break:

ERROR: "crypto_alloc_shash" [lib/digsig.ko] undefined!
ERROR: "crypto_shash_final" [lib/digsig.ko] undefined!
ERROR: "crypto_shash_update" [lib/digsig.ko] undefined!
ERROR: "crypto_destroy_tfm" [lib/digsig.ko] undefined!

Added CRYPTO dependency and selected SHA1 algorithm.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>

It was reported that DIGSIG is confusing name for digital signature
module. It was suggested to rename DIGSIG to SIGNATURE.
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>

Enabling CONFIG_PROVE_RCU and CONFIG_SPARSE_RCU_POINTER resulted in
"suspicious rcu_dereference_check() usage!" and "incompatible types
in comparison expression (different address spaces)" messages.

Access the masterkey directly when holding the rwsem.

Changelog v1:
- Use either rcu_read_lock()/rcu_derefence_key()/rcu_read_unlock()
or remove the unnecessary rcu_derefence() - David Howells
Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Define rcu_assign_keypointer(), which uses the key payload.rcudata instead
of payload.data, to resolve the CONFIG_SPARSE_RCU_POINTER message:
"incompatible types in comparison expression (different address spaces)"

Replace the rcu_assign_pointer() calls in encrypted/trusted keys with
rcu_assign_keypointer().
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Add missing smp_rmb() primitives to the keyring search code.

When keyring payloads are appended to without replacement (thus using up spare
slots in the key pointer array), an smp_wmb() is issued between the pointer
assignment and the increment of the key count (nkeys).

There should be corresponding read barriers between the read of nkeys and
dereferences of keys[n] when n is dependent on the value of nkeys.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

TOMOYO 2.5 in Linux 3.2 and later handles Unix domain socket's address.
Thus, tomoyo_correct_word2() needs to accept \000 as a valid character, or
TOMOYO 2.5 cannot handle Unix domain's abstract socket address.
Reported-by: Steven Allen <steven@stebalien.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
CC: stable@vger.kernel.org [3.2+]
Signed-off-by: James Morris <jmorris@namei.org>

This set of build failures just started appearing on parisc:

  In file included from drivers/input/serio/serio_raw.c:12:
  include/linux/kref.h: In function 'kref_get':
  include/linux/kref.h:40: error: 'TAINT_WARN' undeclared (first use in this function)
  include/linux/kref.h:40: error: (Each undeclared identifier is reported only once
  include/linux/kref.h:40: error: for each function it appears in.)
  include/linux/kref.h: In function 'kref_sub':
  include/linux/kref.h:65: error: 'TAINT_WARN' undeclared (first use in this function)

It happens because TAINT_WARN is defined in kernel.h and this particular
compile doesn't seem to include it (no idea why it's just manifesting ..
probably some #include file untangling exposed it).

Fix by adding

  #include <linux/kernel.h>

to linux/kref.h
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update MAINTAINERS file with new git repo:
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.gitSigned-off-by: James Morris <jmorris@namei.org>

Jüri Aedla reported that the /proc/<pid>/mem handling really isn't very
robust, and it also doesn't match the permission checking of any of the
other related files.

This changes it to do the permission checks at open time, and instead of
tracking the process, it tracks the VM at the time of the open.  That
simplifies the code a lot, but does mean that if you hold the file
descriptor open over an execve(), you'll continue to read from the _old_
VM.

That is different from our previous behavior, but much simpler.  If
somebody actually finds a load where this matters, we'll need to revert
this commit.

I suspect that nobody will ever notice - because the process mapping
addresses will also have changed as part of the execve.  So you cannot
actually usefully access the fd across a VM change simply because all
the offsets for IO would have changed too.
Reported-by: Jüri Aedla <asd@ut.ee>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

audit_log_d_path() injects an additional space before the prefix,
which serves no purpose and doesn't mix well with other audit_log*()
functions that do not sneak extra characters into the log.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Paris <eparis@redhat.com>

The use of s_id should go through the untrusted string path, just to be
extra careful.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

In the loop, a size_t "len" is used to hold the return value of
audit_log_single_execve_arg(), which returns -1 on error.  In that
case the error handling (len <= 0) will be bypassed since "len" is
unsigned, and the loop continues with (p += len) being wrapped.
Change the type of "len" to signed int to fix the error handling.

	size_t len;
	...
	for (...) {
		len = audit_log_single_execve_arg(...);
		if (len <= 0)
			break;
		p += len;
	}
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

This allows audit to specify rules in which we compare two fields of a
process.  Such as is the running process uid != to the running process
euid?
Signed-off-by: Peter Moody <pmoody@google.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

This completes the matrix of interfield comparisons between uid/gid
information for the current task and the uid/gid information for inodes.
aka I can audit based on differences between the euid of the process and
the uid of fs objects.
Signed-off-by: Peter Moody <pmoody@google.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

Allow audit rules to compare the gid of the running task to the gid of the
inode in question.
Signed-off-by: Eric Paris <eparis@redhat.com>

Rather than code the same loop over and over implement a helper function which
uses some pointer magic to make it generic enough to be used numerous places
as we implement more audit interfield comparisons
Signed-off-by: Eric Paris <eparis@redhat.com>

We wish to be able to audit when a uid=500 task accesses a file which is
uid=0.  Or vice versa.  This patch introduces a new audit filter type
AUDIT_FIELD_COMPARE which takes as an 'enum' which indicates which fields
should be compared.  At this point we only define the task->uid vs
inode->uid, but other comparisons can be added.
Signed-off-by: Eric Paris <eparis@redhat.com>

This patch provides functionality to audit system call events on the
ARM platform. The implementation was based off the structure of the
MIPS platform and information in this
(http://lists.fedoraproject.org/pipermail/arm/2009-October/000382.html)
mailing list thread. The required audit_syscall_exit and
audit_syscall_entry checks were added to ptrace using the standard
registers for system call values (r0 through r3). A thread information
flag was added for auditing (TIF_SYSCALL_AUDIT) and a meta-flag was
added (_TIF_SYSCALL_WORK) to simplify modifications to the syscall
entry/exit. Now, if either the TRACE flag is set or the AUDIT flag is
set, the syscall_trace function will be executed. The prober changes
were made to Kconfig to allow CONFIG_AUDITSYSCALL to be enabled.

Due to platform availability limitations, this patch was only tested
on the Android platform running the modified "android-goldfish-2.6.29"
kernel. A test compile was performed using Code Sourcery's
cross-compilation toolset and the current linux-3.0 stable kernel. The
changes compile without error. I'm hoping, due to the simple modifications,
the patch is "obviously correct".
Signed-off-by: Nathaniel Husted <nhusted@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

Just a code cleanup really.  We don't need to make a function call just for
it to return on error.  This also makes the VFS function even easier to follow
and removes a conditional on a hot path.
Signed-off-by: Eric Paris <eparis@redhat.com>

At the moment we allow tasks to set their loginuid if they have
CAP_AUDIT_CONTROL.  In reality we want tasks to set the loginuid when they
log in and it be impossible to ever reset.  We had to make it mutable even
after it was once set (with the CAP) because on update and admin might have
to restart sshd.  Now sshd would get his loginuid and the next user which
logged in using ssh would not be able to set his loginuid.

Systemd has changed how userspace works and allowed us to make the kernel
work the way it should.  With systemd users (even admins) are not supposed
to restart services directly.  The system will restart the service for
them.  Thus since systemd is going to loginuid==-1, sshd would get -1, and
sshd would be allowed to set a new loginuid without special permissions.

If an admin in this system were to manually start an sshd he is inserting
himself into the system chain of trust and thus, logically, it's his
loginuid that should be used!  Since we have old systems I make this a
Kconfig option.
Signed-off-by: Eric Paris <eparis@redhat.com>

The function always deals with current.  Don't expose an option
pretending one can use it for something.  You can't.
Signed-off-by: Eric Paris <eparis@redhat.com>

Much like the ability to filter audit on the uid of an inode collected, we
should be able to filter on the gid of the inode.
Signed-off-by: Eric Paris <eparis@redhat.com>

Allow syscall exit filter matching based on the uid of the owner of an
inode used in a syscall.  aka:

auditctl -a always,exit -S open -F obj_uid=0 -F perm=wa
Signed-off-by: Eric Paris <eparis@redhat.com>

Audit entry,always rules are not allowed and are automatically changed in
exit,always rules in userspace.  The kernel refuses to load such rules.

Thus a task in the middle of a syscall (and thus in audit_finish_fork())
can only be in one of two states: AUDIT_BUILD_CONTEXT or AUDIT_DISABLED.
Since the current task cannot be in AUDIT_RECORD_CONTEXT we aren't every
going to actually use the code in audit_finish_fork() since it will
return without doing anything.  Thus drop the code.
Signed-off-by: Eric Paris <eparis@redhat.com>