Pull iommu updates from Joerg Roedel:

 - Convert to platform remove callback returning void

 - Extend changing default domain to normal group

 - Intel VT-d updates:
     - Remove VT-d virtual command interface and IOASID
     - Allow the VT-d driver to support non-PRI IOPF
     - Remove PASID supervisor request support
     - Various small and misc cleanups

 - ARM SMMU updates:
     - Device-tree binding updates:
         * Allow Qualcomm GPU SMMUs to accept relevant clock properties
         * Document Qualcomm 8550 SoC as implementing an MMU-500
         * Favour new "qcom,smmu-500" binding for Adreno SMMUs

     - Fix S2CR quirk detection on non-architectural Qualcomm SMMU
       implementations

     - Acknowledge SMMUv3 PRI queue overflow when consuming events

     - Document (in a comment) why ATS is disabled for bypass streams

 - AMD IOMMU updates:
     - 5-level page-table support
     - NUMA awareness for memory allocations

 - Unisoc driver: Support for reattaching an existing domain

 - Rockchip driver: Add missing set_platform_dma_ops callback

 - Mediatek driver: Adjust the dma-ranges

 - Various other small fixes and cleanups

* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
  iommu: Remove iommu_group_get_by_id()
  iommu: Make iommu_release_device() static
  iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
  iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
  iommu/vt-d: Remove BUG_ON in map/unmap()
  iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
  iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
  iommu/vt-d: Remove BUG_ON on checking valid pfn range
  iommu/vt-d: Make size of operands same in bitwise operations
  iommu/vt-d: Remove PASID supervisor request support
  iommu/vt-d: Use non-privileged mode for all PASIDs
  iommu/vt-d: Remove extern from function prototypes
  iommu/vt-d: Do not use GFP_ATOMIC when not needed
  iommu/vt-d: Remove unnecessary checks in iopf disabling path
  iommu/vt-d: Move PRI handling to IOPF feature path
  iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
  iommu/vt-d: Move iopf code from SVA to IOPF enabling path
  iommu/vt-d: Allow SVA with device-specific IOPF
  dmaengine: idxd: Add enable/disable device IOPF feature
  arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
  ...

Pull compute express link updates from Dan Williams:
 "DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
  blessing, and the CXL core continues to mature its media management
  capabilities with support for listing and injecting media errors. Some
  late fixes that missed v6.3-final are also included:

   - Refactor the DOE infrastructure (Data Object Exchange
     PCI-config-cycle mailbox) to be a facility of the PCI core rather
     than the CXL core.

     This is foundational for upcoming support for PCI
     device-attestation and PCIe / CXL link encryption.

   - Add support for retrieving and injecting poison for CXL memory
     expanders.

     This enabling uses trace-events to convey CXL media error records
     to user tooling. It includes translation of device-local addresses
     (DPA) to system physical addresses (SPA) and their corresponding
     CXL region.

   - Fixes for decoder enumeration that missed v6.3-final

   - Miscellaneous fixups"

* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
  cxl/test: Add mock test for set_timestamp
  cxl/mbox: Update CMD_RC_TABLE
  tools/testing/cxl: Require CONFIG_DEBUG_FS
  tools/testing/cxl: Add a sysfs attr to test poison inject limits
  tools/testing/cxl: Use injected poison for get poison list
  tools/testing/cxl: Mock the Clear Poison mailbox command
  tools/testing/cxl: Mock the Inject Poison mailbox command
  cxl/mem: Add debugfs attributes for poison inject and clear
  cxl/memdev: Trace inject and clear poison as cxl_poison events
  cxl/memdev: Warn of poison inject or clear to a mapped region
  cxl/memdev: Add support for the Clear Poison mailbox command
  cxl/memdev: Add support for the Inject Poison mailbox command
  tools/testing/cxl: Mock support for Get Poison List
  cxl/trace: Add an HPA to cxl_poison trace events
  cxl/region: Provide region info to the cxl_poison trace event
  cxl/memdev: Add trigger_poison_list sysfs attribute
  cxl/trace: Add TRACE support for CXL media-error records
  cxl/mbox: Add GET_POISON_LIST mailbox command
  cxl/mbox: Initialize the poison state
  cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
  ...

Pull s390 updates from Vasily Gorbik:

 - Add support for stackleak feature. Also allow specifying
   architecture-specific stackleak poison function to enable faster
   implementation. On s390, the mvc-based implementation helps decrease
   typical overhead from a factor of 3 to just 25%

 - Convert all assembler files to use SYM* style macros, deprecating the
   ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS

 - Improve KASLR to also randomize module and special amode31 code base
   load addresses

 - Rework decompressor memory tracking to support memory holes and
   improve error handling

 - Add support for protected virtualization AP binding

 - Add support for set_direct_map() calls

 - Implement set_memory_rox() and noexec module_alloc()

 - Remove obsolete overriding of mem*() functions for KASAN

 - Rework kexec/kdump to avoid using nodat_stack to call purgatory

 - Convert the rest of the s390 code to use flexible-array member
   instead of a zero-length array

 - Clean up uaccess inline asm

 - Enable ARCH_HAS_MEMBARRIER_SYNC_CORE

 - Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
   DEBUG_FORCE_FUNCTION_ALIGN_64B

 - Resolve last_break in userspace fault reports

 - Simplify one-level sysctl registration

 - Clean up branch prediction handling

 - Rework CPU counter facility to retrieve available counter sets just
   once

 - Other various small fixes and improvements all over the code

* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
  s390/stackleak: provide fast __stackleak_poison() implementation
  stackleak: allow to specify arch specific stackleak poison function
  s390: select ARCH_USE_SYM_ANNOTATIONS
  s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
  s390: wire up memfd_secret system call
  s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
  s390/mm: use BIT macro to generate SET_MEMORY bit masks
  s390/relocate_kernel: adjust indentation
  s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
  s390/entry: use SYM* macros instead of ENTRY(), etc.
  s390/purgatory: use SYM* macros instead of ENTRY(), etc.
  s390/kprobes: use SYM* macros instead of ENTRY(), etc.
  s390/reipl: use SYM* macros instead of ENTRY(), etc.
  s390/head64: use SYM* macros instead of ENTRY(), etc.
  s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
  s390/mcount: use SYM* macros instead of ENTRY(), etc.
  s390/crc32le: use SYM* macros instead of ENTRY(), etc.
  s390/crc32be: use SYM* macros instead of ENTRY(), etc.
  s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
  s390/amode31: use SYM* macros instead of ENTRY(), etc.
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Refactor scripts/kallsyms to make it faster and easier to maintain

 - Clean up menuconfig

 - Provide Clang with hard-coded target triple instead of CROSS_COMPILE

 - Use -z pack-relative-relocs flags instead of --use-android-relr-tags
   for arm64 CONFIG_RELR

 - Add srcdeb-pkg target to build only a Debian source package

 - Add KDEB_SOURCE_COMPRESS option to specify the compression for a
   Debian source package

 - Misc cleanups and fixes

* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: deb-pkg: specify targets in debian/rules as .PHONY
  sparc: unify sparc32/sparc64 archhelp
  kbuild: rpm-pkg: remove kernel-drm PROVIDES
  kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
  kbuild: add srcdeb-pkg target
  Makefile: use -z pack-relative-relocs
  kbuild: clang: do not use CROSS_COMPILE for target triple
  kconfig: menuconfig: reorder functions to remove forward declarations
  kconfig: menuconfig: remove unused M_EVENT macro
  kconfig: menuconfig: remove OLD_NCURSES macro
  kbuild: builddeb: Eliminate debian/arch use
  scripts/kallsyms: update the usage in the comment block
  scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
  scripts/kallsyms: change the output order
  scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
  scripts/kallsyms: exclude symbols generated by itself dynamically
  scripts/mksysmap: use sed with in-line comments
  scripts/mksysmap: remove comments described in nm(1)
  scripts/kallsyms: remove redundant code for omitting U and N
  kallsyms: expand symbol name into comment for debugging

Pull rust updates from Miguel Ojeda
 "More additions to the Rust core. Importantly, this adds the pin-init
  API, which will be used by other abstractions, such as the
  synchronization ones added here too:

   - pin-init API: a solution for the safe pinned initialization
     problem.

     This allows to reduce the need for 'unsafe' code in the kernel when
     dealing with data structures that require a stable address. Commit
     90e53c5e ("rust: add pin-init API core") contains a nice
     introduction -- here is an example of how it looks like:

        #[pin_data]
        struct Example {
            #[pin]
            value: Mutex<u32>,

            #[pin]
            value_changed: CondVar,
        }

        impl Example {
            fn new() -> impl PinInit<Self> {
                pin_init!(Self {
                    value <- new_mutex!(0),
                    value_changed <- new_condvar!(),
                })
            }
        }

        // In a `Box`.
        let b = Box::pin_init(Example::new())?;

        // In the stack.
        stack_pin_init!(let s = Example::new());

   - 'sync' module:

     New types 'LockClassKey' ('struct lock_class_key'), 'Lock',
     'Guard', 'Mutex' ('struct mutex'), 'SpinLock' ('spinlock_t'),
     'LockedBy' and 'CondVar' (uses 'wait_queue_head_t'), plus macros
     such as 'static_lock_class!' and 'new_spinlock!'.

     In particular, 'Lock' and 'Guard' are generic implementations that
     contain code that is common to all locks. Then, different backends
     (the new 'Backend' trait) are implemented and used to define types
     like 'Mutex':

        type Mutex<T> = Lock<T, MutexBackend>;

     In addition, new methods 'assume_init()', 'init_with()' and
     'pin_init_with()' for 'UniqueArc<MaybeUninit<T>>' and 'downcast()'
     for 'Arc<dyn Any + Send + Sync>'; as well as 'Debug' and 'Display'
     implementations for 'Arc' and 'UniqueArc'. Reduced stack usage of
     'UniqueArc::try_new_uninit()', too.

   - 'types' module:

     New trait 'AlwaysRefCounted' and new type 'ARef' (an owned
     reference to an always-reference-counted object, meant to be used
     in wrappers for C types that have their own ref counting
     functions).

     Moreover, new associated functions 'raw_get()' and 'ffi_init()' for
     'Opaque'.

   - New 'task' module with a new type 'Task' ('struct task_struct'),
     and a new macro 'current!' to safely get a reference to the current
     one.

   - New 'ioctl' module with new '_IOC*' const functions (equivalent to
     the C macros).

   - New 'uapi' crate, intended to be accessible by drivers directly.

   - 'macros' crate: new 'quote!' macro (similar to the one provided in
     userspace by the 'quote' crate); and the 'module!' macro now allows
     specifying multiple module aliases.

   - 'error' module:

     New associated functions for the 'Error' type, such as
     'from_errno()' and new functions such as 'to_result()'.

   - 'alloc' crate:

     More fallible 'Vec' methods: 'try_resize` and
     'try_extend_from_slice' and the infrastructure (imported from the
     Rust standard library) they need"

* tag 'rust-6.4' of https://github.com/Rust-for-Linux/linux: (44 commits)
  rust: ioctl: Add ioctl number manipulation functions
  rust: uapi: Add UAPI crate
  rust: sync: introduce `CondVar`
  rust: lock: add `Guard::do_unlocked`
  rust: sync: introduce `LockedBy`
  rust: introduce `current`
  rust: add basic `Task`
  rust: introduce `ARef`
  rust: lock: introduce `SpinLock`
  rust: lock: introduce `Mutex`
  rust: sync: introduce `Lock` and `Guard`
  rust: sync: introduce `LockClassKey`
  MAINTAINERS: add Benno Lossin as Rust reviewer
  rust: init: broaden the blanket impl of `Init`
  rust: sync: add functions for initializing `UniqueArc<MaybeUninit<T>>`
  rust: sync: reduce stack usage of `UniqueArc::try_new_uninit`
  rust: types: add `Opaque::ffi_init`
  rust: prelude: add `pin-init` API items to prelude
  rust: init: add `Zeroable` trait and `init::zeroed` function
  rust: init: add `stack_pin_init!` macro
  ...

Pull EFI updates from Ard Biesheuvel:

 - relocate the LoongArch kernel if the preferred address is already
   occupied

 - implement BTI annotations for arm64 EFI stub and zboot images

 - clean up arm64 zboot Kbuild rules for injecting the kernel code size

* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/zboot: arm64: Grab code size from ELF symbol in payload
  efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
  efi/zboot: Set forward edge CFI compat header flag if supported
  efi/zboot: Add BSS padding before compression
  arm64: efi: Enable BTI codegen and add PE/COFF annotation
  efi/pe: Import new BTI/IBT header flags from the spec
  efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel

Pull power supply and reset updates from Sebastian Reichel:

 - power-supply core support for automatic handling of constant battery
   data supplied by firmware

 - generic-adc-battery: major cleanup

 - axp288_charger: fix ACPI issues on x86 Android tablets

 - rk817: cleanup and fix handling for low state of charge

* tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits)
  power: supply: rk817: Fix low SOC bugs
  power: supply: rk817: Drop unneeded debugging code
  power: supply: axp288_charger: Use alt usb-id extcon on some x86 android tablets
  power: supply: generic-adc-battery: style fixes
  power: supply: generic-adc-battery: improve error message
  power: supply: generic-adc-battery: update copyright info
  power: supply: generic-adc-battery: add DT support
  power: supply: generic-adc-battery: add temperature support
  power: supply: generic-adc-battery: simplify read_channel logic
  power: supply: generic-adc-battery: use simple-battery API
  power: supply: generic-adc-battery: drop memory alloc error message
  power: supply: generic-adc-battery: drop charge now support
  power: supply: generic-adc-battery: drop jitter delay support
  power: supply: generic-adc-battery: fix unit scaling
  power: supply: generic-adc-battery: convert to managed resources
  power: supply: core: auto-exposure of simple-battery data
  dt-bindings: power: supply: adc-battery: add binding
  power: supply: bq256xx: Support to disable charger
  power: supply: charger-manager: Use of_property_read_bool() for boolean properties
  power: reset: qcom-pon: drop of_match_ptr for ID table
  ...

Pull clk updates from Stephen Boyd:
 "Nothing looks out of the ordinary in this batch of clk driver updates.

  There are a couple patches to the core clk framework, but they're all
  basically cleanups or debugging aids. The driver updates and new
  additions are dominated in the diffstat by Qualcomm and MediaTek
  drivers. Qualcomm gained a handful of new drivers for various SoCs,
  and MediaTek gained a bunch of drivers for MT8188. The MediaTek
  drivers are being modernized as well, so there are updates all over
  that vendor's clk drivers. There's also a couple other new clk drivers
  in here, for example the Starfive JH7110 SoC support is added.

  Outside of the two major SoC vendors though, we have the usual
  collection of non-critical fixes and cleanups to various clk drivers.
  It's good to see that we're getting more cleanups and modernization
  patches. Maybe one day we'll be able to properly split clk providers
  from clk consumers.

  Core:
   - Print an informational message before disabling unused clks

  New Drivers:
   - BCM63268 timer clock and reset controller
   - Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
     MT8195 SoCs
   - Mediatek MT8188 SoC clk drivers
   - Clock driver for Sunplus SP7021 SoC
   - Clk driver support for Loongson-2 SoCs
   - Clock driver for Skyworks Si521xx I2C PCIe clock generators
   - Initial Starfive JH7110 clk/reset support
   - Global clock controller drivers for Qualcomm SM7150, IPQ9574,
     MSM8917 and IPQ5332 SoCs
   - GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
     SoCs

  Updates:
   - Shrink size of clk_fractional_divider a little
   - Convert various clk drivers to devm_of_clk_add_hw_provider()
   - Convert platform clk drivers to remove_new()
   - Converted most Mediatek clock drivers to struct platform_driver
   - MediaTek clock drivers can be built as modules
   - Reimplement Loongson-1 clk driver with DT support
   - Migrate socfpga clk driver to of_clk_add_hw_provider()
   - Support for i3c clks on Aspeed ast2600 SoCs
   - Add clock generic devm_clk_hw_register_gate_parent_data
   - Add audiomix block control for i.MX8MP
   - Add support for determine_rate to i.MX composite-8m
   - Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
   - Provide clock name in error message for clk-gpr-mux on get parent
     failure
   - Drop duplicate imx_clk_mux_flags macro
   - Register the i.MX8MP Media Disp2 Pix clock as bus clock
   - Add Media LDB root clock to i.MX8MP
   - Make i.MX8MP nand_usdhc_bus clock as non-critical
   - Fix the rate table for i.MX fracn-gppll
   - Disable HW control for the fracn-gppll in order to be controlled by
     register write
   - Add support for interger PLL in fracn-gppll
   - Add mcore_booted module parameter to i.MX93 provider
   - Add NIC, A55 and ARM PLL clocks to i.MX93
   - Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
   - Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
     to get more accurate clock rates
   - Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
   - Update some of the i.MX critical clocks flags to allow glitchless
     on-the-fly rate change.
   - Add I2C5 clock on Renesas R-Car V3H
   - Exynos850: Add CMU_G3D clock controller for the Mali GPU
   - Extract Exynos5433 (ARM64) clock controller power management code
     to common driver parts
   - Exynos850: make PMU_ALIVE_PCLK clock critical
   - Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
     Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
     V4H
   - Add video capture (VIN) clocks on Renesas R-Car V3H
   - Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
   - Support for Stromer Plus PLL on Qualcomm IPQ5332
   - Add a missing reset to Qualcomm QCM2290
   - Migrate Qualcomm IPQ4019 to clk_parent_data
   - Make USB GDSCs enter retention state when disabled on Qualcomm
     SM6375, MSM8996 and MSM8998 SoCs
   - Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
   - Add two EMAC GDSCs on Qualcomm SC8280XP
   - Use shared rcg clk ops in Qualcomm SM6115 GCC
   - Park Qualcomm SM8350 PCIe PIPE clks when disabled
   - Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
   - Add missing XO clocks to Qualcomm MSM8226 and MSM8974
   - Convert some Qualcomm clk DT bindings to YAML
   - Reparenting fix for the clock supplying camera modules on Rockchip
     rk3399
   - Mark more critical (bus-)clocks on Rockchip rk3588"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
  clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
  clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
  clk: rockchip: rk3588: make gate linked clocks critical
  clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
  clk: qcom: add the GPUCC driver for sa8775p
  dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
  clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
  clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
  clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
  dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
  clk: starfive: Avoid casting iomem pointers
  clk: microchip: fix potential UAF in auxdev release callback
  clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
  clk: mediatek: fhctl: Mark local variables static
  clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
  clk: uniphier: Use managed `of_clk_add_hw_provider()`
  clk: si5351: Use managed `of_clk_add_hw_provider()`
  clk: si570: Use managed `of_clk_add_hw_provider()`
  clk: si514: Use managed `of_clk_add_hw_provider()`
  clk: lmk04832: Use managed `of_clk_add_hw_provider()`
  ...

Pull rdma updates from Jason Gunthorpe:
 "Usual wide collection of unrelated items in drivers:

   - Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5,
     rxe, usnic, usnic, bnxt_re, ocrdma, iser:
       - remove unnecessary NULL checks
       - kmap obsolescence
       - pci_enable_pcie_error_reporting() obsolescence
       - unused variables and macros
       - trace event related warnings
       - casting warnings

   - Code cleanups for irdm and erdma

   - EFA reporting of 128 byte PCIe TLP support

   - mlx5 more agressively uses the out of order HW feature

   - Big rework of how state machines and tasks work in rxe

   - Fix a syzkaller found crash netdev refcount leak in siw

   - bnxt_re revises their HW description header

   - Congestion control for bnxt_re

   - Use mmu_notifiers more safely in hfi1

   - mlx5 gets better support for PCIe relaxed ordering inside VMs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (81 commits)
  RDMA/efa: Add rdma write capability to device caps
  RDMA/mlx5: Use correct device num_ports when modify DC
  RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call
  RDMA/rxe: Fix spinlock recursion deadlock on requester
  RDMA/mlx5: Fix flow counter query via DEVX
  RDMA/rxe: Protect QP state with qp->state_lock
  RDMA/rxe: Move code to check if drained to subroutine
  RDMA/rxe: Remove qp->req.state
  RDMA/rxe: Remove qp->comp.state
  RDMA/rxe: Remove qp->resp.state
  RDMA/mlx5: Allow relaxed ordering read in VFs and VMs
  net/mlx5: Update relaxed ordering read HCA capabilities
  RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR
  RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write
  RDMA: Add ib_virt_dma_to_page()
  RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"
  RDMA/irdma: Slightly optimize irdma_form_ah_cm_frame()
  RDMA/rxe: Fix incorrect TASKLET_STATE_SCHED check in rxe_task.c
  IB/hfi1: Place struct mmu_rb_handler on cache line start
  IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests
  ...

Pull ksmbd server updates from Steve French:

 - SMB3.1.1 negotiate context fixes and cleanup

 - new lock_rename_child VFS helper

 - ksmbd fix to avoid unlink race and to use the new VFS helper to avoid
   rename race

* tag '6.4-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix racy issue from using ->d_parent and ->d_name
  ksmbd: remove unused compression negotiate ctx packing
  ksmbd: avoid duplicate negotiate ctx offset increments
  ksmbd: set NegotiateContextCount once instead of every inc
  fs: introduce lock_rename_child() helper
  ksmbd: remove internal.h include

Pull nfsd updates from Chuck Lever:
 "The big ticket item for this release is that support for RPC-with-TLS
  [RFC 9289] has been added to the Linux NFS server.

  The goal is to provide a simple-to-deploy, low-overhead in-transit
  confidentiality and peer authentication mechanism. It can supplement
  NFS Kerberos and it can protect the use of legacy non-cryptographic
  user authentication flavors such as AUTH_SYS. The TLS Record protocol
  is handled entirely by kTLS, meaning it can use either software
  encryption or offload encryption to smart NICs.

  Aside from that, work continues on improving NFSD's open file cache.
  Among the many clean-ups in that area is a patch to convert the
  rhashtable to use the list-hashing version of that data structure"

* tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
  NFSD: Handle new xprtsec= export option
  SUNRPC: Support TLS handshake in the server-side TCP socket code
  NFSD: Clean up xattr memory allocation flags
  NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
  SUNRPC: Clear rq_xid when receiving a new RPC Call
  SUNRPC: Recognize control messages in server-side TCP socket code
  SUNRPC: Be even lazier about releasing pages
  SUNRPC: Convert svc_xprt_release() to the release_pages() API
  SUNRPC: Relocate svc_free_res_pages()
  nfsd: simplify the delayed disposal list code
  SUNRPC: Ignore return value of ->xpo_sendto
  SUNRPC: Ensure server-side sockets have a sock->file
  NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
  sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
  SUNRPC: return proper error from get_expiry()
  lockd: add some client-side tracepoints
  nfs: move nfs_fhandle_hash to common include file
  lockd: server should unlock lock if client rejects the grant
  lockd: fix races in client GRANTED_MSG wait logic
  lockd: move struct nlm_wait to lockd.h
  ...

Pull NFS client updates from Anna Schumaker:
 "New Features:

   - Convert the readdir path to use folios

   - Convert the NFS fscache code to use netfs

  Bugfixes and Cleanups:

   - Always send a RECLAIM_COMPLETE after establishing a lease

   - Simplify sysctl registrations and other cleanups

   - Handle out-of-order write replies on NFS v3

   - Have sunrpc call_bind_status use standard hard/soft task semantics

   - Other minor cleanups"

* tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.2: Rework scratch handling for READ_PLUS
  NFS: Cleanup unused rpc_clnt variable
  NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static
  SUNRPC: remove the maximum number of retries in call_bind_status
  NFS: Convert readdir page array functions to use a folio
  NFS: Convert the readdir array-of-pages into an array-of-folios
  NFSv3: handle out-of-order write replies.
  NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit
  NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API
  NFS: Convert buffered read paths to use netfs when fscache is enabled
  NFS: Configure support for netfs when NFS fscache is configured
  NFS: Rename readpage_async_filler to nfs_read_add_folio
  sunrpc: simplify one-level sysctl registration for debug_table
  sunrpc: move sunrpc_table and proc routines above
  sunrpc: simplify one-level sysctl registration for xs_tunables_table
  sunrpc: simplify one-level sysctl registration for xr_tunables_table
  nfs: simplify two-level sysctl registration for nfs_cb_sysctls
  nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
  lockd: simplify two-level sysctl registration for nlm_sysctls
  NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease

Pull ntfs3 updates from Konstantin Komarov:
 "New code:

   - add missed "nocase" in ntfs_show_options

   - extend information on failures/errors

   - small optimizations

  Fixes:

   - some logic errors

   - some dead code was removed

   - code is refactored and reformatted according to the new version of
     clang-format

  Code removal:

   - 'noacsrules' option.

     Currently, this option does not work properly, and its use leads to
     unstable results. If we figure out how to implement it without
     errors, we will add it later

   - writepage"

* tag 'ntfs3_for_6.4' of https://github.com/Paragon-Software-Group/linux-ntfs3: (30 commits)
  fs/ntfs3: Fix root inode checking
  fs/ntfs3: Print details about mount fails
  fs/ntfs3: Add missed "nocase" in ntfs_show_options
  fs/ntfs3: Code formatting and refactoring
  fs/ntfs3: Changed ntfs_get_acl() to use dentry
  fs/ntfs3: Remove field sbi->used.bitmap.set_tail
  fs/ntfs3: Undo critial modificatins to keep directory consistency
  fs/ntfs3: Undo endian changes
  fs/ntfs3: Optimization in ntfs_set_state()
  fs/ntfs3: Fix ntfs_create_inode()
  fs/ntfs3: Remove noacsrules
  fs/ntfs3: Use bh_read to simplify code
  fs/ntfs3: Fix a possible null-pointer dereference in ni_clear()
  fs/ntfs3: Refactoring of various minor issues
  fs/ntfs3: Restore overflow checking for attr size in mi_enum_attr
  fs/ntfs3: Check for extremely large size of $AttrDef
  fs/ntfs3: Improved checking of attribute's name length
  fs/ntfs3: Add null pointer checks
  fs/ntfs3: fix spelling mistake "attibute" -> "attribute"
  fs/ntfs3: Add length check in indx_get_root
  ...

Pull xfs updates from Dave Chinner:
 "This consists mainly of online scrub functionality and the design
  documentation for the upcoming online repair functionality built on
  top of the scrub code:

   - Added detailed design documentation for the upcoming online repair
     feature

   - major update to online scrub to complete the reverse mapping
     cross-referencing infrastructure enabling us to fully validate
     allocated metadata against owner records. This is the last piece of
     scrub infrastructure needed before we can start merging online
     repair functionality.

   - Fixes for the ascii-ci hashing issues

   - deprecation of the ascii-ci functionality

   - on-disk format verification bug fixes

   - various random bug fixes for syzbot and other bug reports"

* tag 'xfs-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (107 commits)
  xfs: fix livelock in delayed allocation at ENOSPC
  xfs: Extend table marker on deprecated mount options table
  xfs: fix duplicate includes
  xfs: fix BUG_ON in xfs_getbmap()
  xfs: verify buffer contents when we skip log replay
  xfs: _{attr,data}_map_shared should take ILOCK_EXCL until iread_extents is completely done
  xfs: remove WARN when dquot cache insertion fails
  xfs: don't consider future format versions valid
  xfs: deprecate the ascii-ci feature
  xfs: test the ascii case-insensitive hash
  xfs: stabilize the dirent name transformation function used for ascii-ci dir hash computation
  xfs: cross-reference rmap records with refcount btrees
  xfs: cross-reference rmap records with inode btrees
  xfs: cross-reference rmap records with free space btrees
  xfs: cross-reference rmap records with ag btrees
  xfs: introduce bitmap type for AG blocks
  xfs: convert xbitmap to interval tree
  xfs: drop the _safe behavior from the xbitmap foreach macro
  xfs: don't load local xattr values during scrub
  xfs: remove the for_each_xbitmap_ helpers
  ...

Pull iomap updates from Darrick Wong:
 "The only changes for this cycle are the addition of tracepoints to the
  iomap directio code so that Ritesh (who is working on porting ext2 to
  iomap) can observe the io flows more easily.

  Summary:

   - Remove an unused symbol

   - Add tracepoints for the directio code"

* tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Add DIO tracepoints
  iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
  fs.h: Add TRACE_IOCB_STRINGS for use in trace points

Pull dma-mapping updates from Christoph Hellwig:

 - fix a PageHighMem check in dma-coherent initialization (Doug Berger)

 - clean up the coherency defaul initialiation (Jiaxun Yang)

 - add cacheline to user/kernel dma-debug space dump messages (Desnes
   Nunes, Geert Uytterhoeve)

 - swiotlb statistics improvements (Michael Kelley)

 - misc cleanups (Petr Tesarik)

* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
  swiotlb: track and report io_tlb_used high water marks in debugfs
  swiotlb: fix debugfs reporting of reserved memory pools
  swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
  of: address: always use dma_default_coherent for default coherency
  dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
  dma-mapping: provide a fallback dma_default_coherent
  dma-debug: Use %pa to format phys_addr_t
  dma-debug: add cacheline to user/kernel space dump messages
  dma-debug: small dma_debug_entry's comment and variable name updates
  dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask

Pull more timer updates from Thomas Gleixner:
 "Timekeeping and clocksource/event driver updates the second batch:

   - A trivial documentation fix in the timekeeping core

   - A really boring set of small fixes, enhancements and cleanups in
     the drivers code. No new clocksource/clockevent drivers for a
     change"

* tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix references to nonexistent ktime_get_fast_ns()
  dt-bindings: timer: rockchip: Add rk3588 compatible
  dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible
  clocksource/drivers/ti: Use of_property_read_bool() for boolean properties
  clocksource/drivers/timer-ti-dm: Fix finding alwon timer
  clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
  clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table
  clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void
  clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void
  clocksource/drivers/timer-ti-dm: Improve error message in .remove
  clocksource/drivers/timer-stm32-lp: Mark driver as non-removable
  clocksource/drivers/sh_mtu2: Mark driver as non-removable
  clocksource/drivers/timer-ti-dm: Use of_address_to_resource()
  clocksource/drivers/timer-imx-gpt: Remove non-DT function
  clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
  clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer

Pull lsm fix from Paul Moore:
 "A single Documentation/LSM fix to update the LSM hook documentation
  references from lsm_hooks.h to security.c"

* tag 'lsm-pr-20230428' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: move hook comments docs to security/security.c

Pull integrity update from Mimi Zohar:
 "Just one one bug fix. Other integrity changes are being upstreamed via
  the tpm and lsm trees"

* tag 'integrity-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  IMA: allow/fix UML builds

Pull cgroup updates from Tejun Heo:

 - cpuset changes including the fix for an incorrect interaction with
   CPU hotplug and an optimization

 - Other doc and cosmetic changes

* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1/cpusets: update libcgroup project link
  cgroup/cpuset: Minor updates to test_cpuset_prs.sh
  cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated
  cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset
  cpuset: Clean up cpuset_node_allowed
  cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers

Pull workqueue updates from Tejun Heo:
 "Mostly changes from Petr to improve warning and error reporting.

  Workqueue now reports more of the relevant failures with better
  context which should help debugging"

* tag 'wq-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Introduce show_freezable_workqueues
  workqueue: Print backtraces from CPUs with hung CPU bound workqueues
  workqueue: Warn when a rescuer could not be created
  workqueue: Interrupted create_worker() is not a repeated event
  workqueue: Warn when a new worker could not be created
  workqueue: Fix hung time report of worker pools
  workqueue: Simplify a pr_warn() call in wq_select_unbound_cpu()
  MAINTAINERS: Add workqueue_internal.h to the WORKQUEUE entry

Pull RISC-V updates from Palmer Dabbelt:

 - Support for runtime detection of the Svnapot extension

 - Support for Zicboz when clearing pages

 - We've moved to GENERIC_ENTRY

 - Support for !MMU on rv32 systems

 - The linear region is now mapped via huge pages

 - Support for building relocatable kernels

 - Support for the hwprobe interface

 - Various fixes and cleanups throughout the tree

* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
  RISC-V: hwprobe: Explicity check for -1 in vdso init
  RISC-V: hwprobe: There can only be one first
  riscv: Allow to downgrade paging mode from the command line
  dt-bindings: riscv: add sv57 mmu-type
  RISC-V: hwprobe: Remove __init on probe_vendor_features()
  riscv: Use --emit-relocs in order to move .rela.dyn in init
  riscv: Check relocations at compile time
  powerpc: Move script to check relocations at compile time in scripts/
  riscv: Introduce CONFIG_RELOCATABLE
  riscv: Move .rela.dyn outside of init to avoid empty relocations
  riscv: Prepare EFI header for relocatable kernels
  riscv: Unconditionnally select KASAN_VMALLOC if KASAN
  riscv: Fix ptdump when KASAN is enabled
  riscv: Fix EFI stub usage of KASAN instrumented strcmp function
  riscv: Move DTB_EARLY_BASE_VA to the kernel address space
  riscv: Rework kasan population functions
  riscv: Split early and final KASAN population functions
  riscv: Use PUD/P4D/PGD pages for the linear mapping
  riscv: Move the linear mapping creation in its own function
  riscv: Get rid of riscv_pfn_base variable
  ...

Pull m68knommu updates from Greg Ungerer:
 "A couple of minor changes.

  One to remove the long dead uclinux.org web address and email list
  from the MAINTAINERS entry for UCLINUX.

  The other to remove dead config options in the m68knommu Kconfig"

* tag 'm68knommu-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: Kconfig.machine: remove obsolete configs ROMBASE and ROMSIZE
  MAINTAINERS: drop uclinux.org

Pull powerpc updates from Michael Ellerman:

 - Add support for building the kernel using PC-relative addressing on
   Power10.

 - Allow HV KVM guests on Power10 to use prefixed instructions.

 - Unify support for the P2020 CPU (85xx) into a single machine
   description.

 - Always build the 64-bit kernel with 128-bit long double.

 - Drop support for several obsolete 2000's era development boards as
   identified by Paul Gortmaker.

 - A series fixing VFIO on Power since some generic changes.

 - Various other small features and fixes.

Thanks to Alexey Kardashevskiy, Andrew Donnellan, Benjamin Gray, Bo Liu,
Christophe Leroy, Dan Carpenter, David Binderman, Ira Weiny, Joel
Stanley, Kajol Jain, Kautuk Consul, Liang He, Luis Chamberlain, Masahiro
Yamada, Michael Neuling, Nathan Chancellor, Nathan Lynch, Nicholas
Miehlbradt, Nicholas Piggin, Nick Desaulniers, Nysal Jan K.A, Pali
Rohár, Paul Gortmaker, Paul Mackerras, Petr Vaněk, Randy Dunlap, Rob
Herring, Sachin Sant, Sean Christopherson, Segher Boessenkool, and
Timothy Pearson.

* tag 'powerpc-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
  powerpc/64s: Disable pcrel code model on Clang
  powerpc: Fix merge conflict between pcrel and copy_thread changes
  powerpc/configs/powernv: Add IGB=y
  powerpc/configs/64s: Drop JFS Filesystem
  powerpc/configs/64s: Use EXT4 to mount EXT2 filesystems
  powerpc/configs: Make pseries_defconfig an alias for ppc64le_guest
  powerpc/configs: Make pseries_le an alias for ppc64le_guest
  powerpc/configs: Incorporate generic kvm_guest.config into guest configs
  powerpc/configs: Add IBMVETH=y and IBMVNIC=y to guest configs
  powerpc/configs/64s: Enable Device Mapper options
  powerpc/configs/64s: Enable PSTORE
  powerpc/configs/64s: Enable VLAN support
  powerpc/configs/64s: Enable BLK_DEV_NVME
  powerpc/configs/64s: Drop REISERFS
  powerpc/configs/64s: Use SHA512 for module signatures
  powerpc/configs/64s: Enable IO_STRICT_DEVMEM
  powerpc/configs/64s: Enable SCHEDSTATS
  powerpc/configs/64s: Enable DEBUG_VM & other options
  powerpc/configs/64s: Enable EMULATED_STATS
  powerpc/configs/64s: Enable KUNIT and most tests
  ...

Pull tracing tools updates from Steven Rostedt:

 - Add auto-analysis only option to rtla/timerlat

   Add an --aa-only option to the tooling to perform only the auto
   analysis and not to parse and format the data.

 - Other minor fixes and clean ups

* tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla/timerlat: Fix "Previous IRQ" auto analysis' line
  rtla/timerlat: Add auto-analysis only option
  rv: Remove redundant assignment to variable retval
  rv: Fix addition on an uninitialized variable 'run'
  rtla: Add .gitignore file

Pull tracing updates from Steven Rostedt:

 - User events are finally ready!

   After lots of collaboration between various parties, we finally
   locked down on a stable interface for user events that can also work
   with user space only tracing.

   This is implemented by telling the kernel (or user space library, but
   that part is user space only and not part of this patch set), where
   the variable is that the application uses to know if something is
   listening to the trace.

   There's also an interface to tell the kernel about these events,
   which will show up in the /sys/kernel/tracing/events/user_events/
   directory, where it can be enabled.

   When it's enabled, the kernel will update the variable, to tell the
   application to start writing to the kernel.

   See https://lwn.net/Articles/927595/

 - Cleaned up the direct trampolines code to simplify arm64 addition of
   direct trampolines.

   Direct trampolines use the ftrace interface but instead of jumping to
   the ftrace trampoline, applications (mostly BPF) can register their
   own trampoline for performance reasons.

 - Some updates to the fprobe infrastructure. fprobes are more efficient
   than kprobes, as it does not need to save all the registers that
   kprobes on ftrace do. More work needs to be done before the fprobes
   will be exposed as dynamic events.

 - More updates to references to the obsolete path of
   /sys/kernel/debug/tracing for the new /sys/kernel/tracing path.

 - Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
   line by line instead of all at once.

   There are users in production kernels that have a large data dump
   that originally used printk() directly, but the data dump was larger
   than what printk() allowed as a single print.

   Using seq_buf() to do the printing fixes that.

 - Add /sys/kernel/tracing/touched_functions that shows all functions
   that was every traced by ftrace or a direct trampoline. This is used
   for debugging issues where a traced function could have caused a
   crash by a bpf program or live patching.

 - Add a "fields" option that is similar to "raw" but outputs the fields
   of the events. It's easier to read by humans.

 - Some minor fixes and clean ups.

* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
  ring-buffer: Sync IRQ works before buffer destruction
  tracing: Add missing spaces in trace_print_hex_seq()
  ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
  recordmcount: Fix memory leaks in the uwrite function
  tracing/user_events: Limit max fault-in attempts
  tracing/user_events: Prevent same address and bit per process
  tracing/user_events: Ensure bit is cleared on unregister
  tracing/user_events: Ensure write index cannot be negative
  seq_buf: Add seq_buf_do_printk() helper
  tracing: Fix print_fields() for __dyn_loc/__rel_loc
  tracing/user_events: Set event filter_type from type
  ring-buffer: Clearly check null ptr returned by rb_set_head_page()
  tracing: Unbreak user events
  tracing/user_events: Use print_format_fields() for trace output
  tracing/user_events: Align structs with tabs for readability
  tracing/user_events: Limit global user_event count
  tracing/user_events: Charge event allocs to cgroups
  tracing/user_events: Update documentation for ABI
  tracing/user_events: Use write ABI in example
  tracing/user_events: Add ABI self-test
  ...

Pull SMP cross-CPU function-call updates from Ingo Molnar:

 - Remove diagnostics and adjust config for CSD lock diagnostics

 - Add a generic IPI-sending tracepoint, as currently there's no easy
   way to instrument IPI origins: it's arch dependent and for some major
   architectures it's not even consistently available.

* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  trace,smp: Trace all smp_function_call*() invocations
  trace: Add trace_ipi_send_cpu()
  sched, smp: Trace smp callback causing an IPI
  smp: reword smp call IPI comment
  treewide: Trace IPIs sent via smp_send_reschedule()
  irq_work: Trace self-IPIs sent via arch_irq_work_raise()
  smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
  sched, smp: Trace IPIs sent via send_call_function_single_ipi()
  trace: Add trace_ipi_send_cpumask()
  kernel/smp: Make csdlock_debug= resettable
  locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
  locking/csd_lock: Remove added data from CSD lock debugging
  locking/csd_lock: Add Kconfig option for csd_debug default

Pull scheduler updates from Ingo Molnar:

 - Allow unprivileged PSI poll()ing

 - Fix performance regression introduced by mm_cid

 - Improve livepatch stalls by adding livepatch task switching to
   cond_resched(). This resolves livepatching busy-loop stalls with
   certain CPU-bound kthreads

 - Improve sched_move_task() performance on autogroup configs

 - On core-scheduling CPUs, avoid selecting throttled tasks to run

 - Misc cleanups, fixes and improvements

* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/clock: Fix local_clock() before sched_clock_init()
  sched/rt: Fix bad task migration for rt tasks
  sched: Fix performance regression introduced by mm_cid
  sched/core: Make sched_dynamic_mutex static
  sched/psi: Allow unprivileged polling of N*2s period
  sched/psi: Extract update_triggers side effect
  sched/psi: Rename existing poll members in preparation
  sched/psi: Rearrange polling code in preparation
  sched/fair: Fix inaccurate tally of ttwu_move_affine
  vhost: Fix livepatch timeouts in vhost_worker()
  livepatch,sched: Add livepatch task switching to cond_resched()
  livepatch: Skip task_call_func() for current task
  livepatch: Convert stack entries array to percpu
  sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
  sched/core: Reduce cost of sched_move_task when config autogroup
  sched/core: Avoid selecting the task that is throttled to run when core-sched enable
  sched/topology: Make sched_energy_mutex,update static

Pull perf updates from Ingo Molnar:

 - Add Intel Granite Rapids support

 - Add uncore events for Intel SPR IMC PMU

 - Fix perf IRQ throttling bug

* tag 'perf-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add events for Intel SPR IMC PMU
  perf/core: Fix hardlockup failure caused by perf throttle
  perf/x86/cstate: Add Granite Rapids support
  perf/x86/msr: Add Granite Rapids
  perf/x86/intel: Add Granite Rapids

Pull objtool updates from Ingo Molnar:

 - Mark arch_cpu_idle_dead() __noreturn, make all architectures &
   drivers that did this inconsistently follow this new, common
   convention, and fix all the fallout that objtool can now detect
   statically

 - Fix/improve the ORC unwinder becoming unreliable due to
   UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
   and UNWIND_HINT_UNDEFINED to resolve it

 - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code

 - Generate ORC data for __pfx code

 - Add more __noreturn annotations to various kernel startup/shutdown
   and panic functions

 - Misc improvements & fixes

* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/hyperv: Mark hv_ghcb_terminate() as noreturn
  scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
  x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
  btrfs: Mark btrfs_assertfail() __noreturn
  objtool: Include weak functions in global_noreturns check
  cpu: Mark nmi_panic_self_stop() __noreturn
  cpu: Mark panic_smp_self_stop() __noreturn
  arm64/cpu: Mark cpu_park_loop() and friends __noreturn
  x86/head: Mark *_start_kernel() __noreturn
  init: Mark start_kernel() __noreturn
  init: Mark [arch_call_]rest_init() __noreturn
  objtool: Generate ORC data for __pfx code
  x86/linkage: Fix padding for typed functions
  objtool: Separate prefix code from stack validation code
  objtool: Remove superfluous dead_end_function() check
  objtool: Add symbol iteration helpers
  objtool: Add WARN_INSN()
  scripts/objdump-func: Support multiple functions
  context_tracking: Fix KCSAN noinstr violation
  objtool: Add stackleak instrumentation to uaccess safe list
  ...

Instead of using a tiny, static scratch buffer, we should use a kmalloc()-ed
buffer that is allocated when checking for read plus usage. This lets us
use the buffer before decoding any part of the READ_PLUS operation
instead of setting it right before segment decoding, meaning it should
be a little more robust.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull x86 LAM (Linear Address Masking) support from Dave Hansen:
 "Add support for the new Linear Address Masking CPU feature.

  This is similar to ARM's Top Byte Ignore and allows userspace to store
  metadata in some bits of pointers without masking it out before use"

* tag 'x86_mm_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/iommu/sva: Do not allow to set FORCE_TAGGED_SVA bit from outside
  x86/mm/iommu/sva: Fix error code for LAM enabling failure due to SVA
  selftests/x86/lam: Add test cases for LAM vs thread creation
  selftests/x86/lam: Add ARCH_FORCE_TAGGED_SVA test cases for linear-address masking
  selftests/x86/lam: Add inherit test cases for linear-address masking
  selftests/x86/lam: Add io_uring test cases for linear-address masking
  selftests/x86/lam: Add mmap and SYSCALL test cases for linear-address masking
  selftests/x86/lam: Add malloc and tag-bits test cases for linear-address masking
  x86/mm/iommu/sva: Make LAM and SVA mutually exclusive
  iommu/sva: Replace pasid_valid() helper with mm_valid_pasid()
  mm: Expose untagging mask in /proc/$PID/status
  x86/mm: Provide arch_prctl() interface for LAM
  x86/mm: Reduce untagged_addr() overhead for systems without LAM
  x86/uaccess: Provide untagged_addr() and remove tags before address check
  mm: Introduce untagged_addr_remote()
  x86/mm: Handle LAM on context switch
  x86: CPUID and CR3/CR4 flags for Linear Address Masking
  x86: Allow atomic MM_CONTEXT flags setting
  x86/mm: Rework address range check in get_user() and put_user()

Pull x86 tdx update from Dave Hansen:
 "The original tdx hypercall assembly code took two flags in %RSI to
  tweak its behavior at runtime. PeterZ recently axed one flag in commit
  e80a48ba ("x86/tdx: Remove TDX_HCALL_ISSUE_STI").

  Kill the other flag too and tweak the 'output' mode with an assembly
  macro instead. This results in elimination of one push/pop pair and
  overall easier to read assembly.

   - Do conditional __tdx_hypercall() 'output' processing via an
     assembly macro argument rather than a runtime register"

* tag 'x86_tdx_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tdx: Drop flags from __tdx_hypercall()

Pull x86 fpu updates from Dave Hansen:
 "There's no _actual_ kernel functionality here.

  This expands the documentation around AMX support including some code
  examples. The example code also exposed the fact that hardware
  architecture constants as part of the ABI, but there's no easy place
  that they get defined for apps. Adding them to a uabi header will
  eventually make life easier for consumers of the ABI.

  Summary:

   - Improve AMX documentation along with example code

   - Explicitly make some hardware constants part of the uabi"

* tag 'x86_fpu_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/x86: Explain the state component permission for guests
  Documentation/x86: Add the AMX enabling example
  x86/arch_prctl: Add AMX feature numbers as ABI constants
  Documentation/x86: Explain the purpose for dynamic features

Pull x86 resctrl update from Dave Hansen:
 "Reduce redundant counter reads with resctrl refactoring"

* tag 'x86_cache_for_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Avoid redundant counter read in __mon_event_count()

Pull x86 cleanups from Borislav Petkov:

 - Unify duplicated __pa() and __va() definitions

 - Simplify sysctl tables registration

 - Remove unused symbols

 - Correct function name in comment

* tag 'x86_cleanups_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Centralize __pa()/__va() definitions
  x86: Simplify one-level sysctl registration for itmt_kern_table
  x86: Simplify one-level sysctl registration for abi_table2
  x86/platform/intel-mid: Remove unused definitions from intel-mid.h
  x86/uaccess: Remove memcpy_page_flushcache()
  x86/entry: Change stale function name in comment to error_return()

Fix one kernel-doc warning, but invesigating that led to other
kernel-doc movement (lsm_hooks.h to security.c) that needs to be
fixed also.

include/linux/lsm_hooks.h:1: warning: no structured comments found

Fixes: e261301c ("lsm: move the remaining LSM hook comments to security/security.c")
Fixes: 1cd2aca6 ("lsm: move the io_uring hook comments to security/security.c")
Fixes: 452b670c ("lsm: move the perf hook comments to security/security.c")
Fixes: 55e85320 ("lsm: move the bpf hook comments to security/security.c")
Fixes: b14faf9c ("lsm: move the audit hook comments to security/security.c")
Fixes: 1427ddbe ("lsm: move the binder hook comments to security/security.c")
Fixes: 43fad282 ("lsm: move the sysv hook comments to security/security.c")
Fixes: ecc419a4 ("lsm: move the key hook comments to security/security.c")
Fixes: 742b9945 ("lsm: move the xfrm hook comments to security/security.c")
Fixes: ac318aed ("lsm: move the Infiniband hook comments to security/security.c")
Fixes: 4a49f592 ("lsm: move the SCTP hook comments to security/security.c")
Fixes: 6b6bbe8c ("lsm: move the socket hook comments to security/security.c")
Fixes: 2c2442fd ("lsm: move the AF_UNIX hook comments to security/security.c")
Fixes: 2bcf51bf ("lsm: move the netlink hook comments to security/security.c")
Fixes: 130c53bf ("lsm: move the task hook comments to security/security.c")
Fixes: a0fd6480 ("lsm: move the file hook comments to security/security.c")
Fixes: 9348944b ("lsm: move the kernfs hook comments to security/security.c")
Fixes: 916e3258 ("lsm: move the inode hook comments to security/security.c")
Fixes: 08526a90 ("lsm: move the filesystem hook comments to security/security.c")
Fixes: 36819f18 ("lsm: move the fs_context hook comments to security/security.c")
Fixes: 1661372c ("lsm: move the program execution hook comments to security/security.c")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: KP Singh <kpsingh@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>

Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "Mainly singleton patches all over the place.

  Series of note are:

   - updates to scripts/gdb from Glenn Washburn

   - kexec cleanups from Bjorn Helgaas"

* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
  mailmap: add entries for Paul Mackerras
  libgcc: add forward declarations for generic library routines
  mailmap: add entry for Oleksandr
  ocfs2: reduce ioctl stack usage
  fs/proc: add Kthread flag to /proc/$pid/status
  ia64: fix an addr to taddr in huge_pte_offset()
  checkpatch: introduce proper bindings license check
  epoll: rename global epmutex
  scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
  scripts/gdb: create linux/vfs.py for VFS related GDB helpers
  uapi/linux/const.h: prefer ISO-friendly __typeof__
  delayacct: track delays from IRQ/SOFTIRQ
  scripts/gdb: timerlist: convert int chunks to str
  scripts/gdb: print interrupts
  scripts/gdb: raise error with reduced debugging information
  scripts/gdb: add a Radix Tree Parser
  lib/rbtree: use '+' instead of '|' for setting color.
  proc/stat: remove arch_idle_time()
  checkpatch: check for misuse of the link tags
  checkpatch: allow Closes tags with links
  ...

Pull MM updates from Andrew Morton:

 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
   switching from a user process to a kernel thread.

 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
   Raghav.

 - zsmalloc performance improvements from Sergey Senozhatsky.

 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.

 - VFS rationalizations from Christoph Hellwig:
     - removal of most of the callers of write_one_page()
     - make __filemap_get_folio()'s return value more useful

 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing. Use `mount -o noswap'.

 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.

 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).

 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.

 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
   rather than exclusive, and has fixed a bunch of errors which were
   caused by its unintuitive meaning.

 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.

 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.

 - Cleanups to do_fault_around() by Lorenzo Stoakes.

 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.

 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.

 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.

 - Lorenzo has also contributed further cleanups of vma_merge().

 - Chaitanya Prakash provides some fixes to the mmap selftesting code.

 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.

 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.

 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.

 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.

 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.

 - Yosry Ahmed has improved the performance of memcg statistics
   flushing.

 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.

 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.

 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.

 - Pankaj Raghav has made page_endio() unneeded and has removed it.

 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.

 - Yosry Ahmed has fixed an issue around memcg's page recalim
   accounting.

 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.

 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.

 - Peter Xu fixes a few issues with uffd-wp at fork() time.

 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.

* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
  mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
  shmem: restrict noswap option to initial user namespace
  mm/khugepaged: fix conflicting mods to collapse_file()
  sparse: remove unnecessary 0 values from rc
  mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
  hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
  maple_tree: fix allocation in mas_sparse_area()
  mm: do not increment pgfault stats when page fault handler retries
  zsmalloc: allow only one active pool compaction context
  selftests/mm: add new selftests for KSM
  mm: add new KSM process and sysfs knobs
  mm: add new api to enable ksm per process
  mm: shrinkers: fix debugfs file permissions
  mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
  migrate_pages_batch: fix statistics for longterm pin retry
  userfaultfd: use helper function range_in_vma()
  lib/show_mem.c: use for_each_populated_zone() simplify code
  mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
  fs/buffer: convert create_page_buffers to folio_create_buffers
  fs/buffer: add folio_create_empty_buffers helper
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Huawei B593u-12

 - added support for virt board aligned to QEMU MIPS virt board

 - added support for doing DMA coherence on a per device base

 - reworked handling of RALINK SoCs

 - cleanup for Loongon64 barriers

 - removed deprecated support for MIPS_CMP SMP handling method

 - removed support Sibyte CARMEL and CHRINE boards

 - cleanups and fixes

* tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
  MIPS: uprobes: Restore thread.trap_nr
  MIPS: Don't clear _PAGE_SPECIAL in _PAGE_CHG_MASK
  MIPS: Sink body of check_bugs_early() into its only call site
  MIPS: Mark check_bugs() as __init
  Revert "MIPS: generic: Enable all CPUs supported by virt board in Kconfig"
  MIPS: octeon_switch: Remove duplicated labels
  MIPS: loongson2ef: Add missing break in cs5536_isa
  MIPS: Remove set_swbp() in uprobes.c
  MIPS: Use def_bool y for ARCH_SUPPORTS_UPROBES
  MIPS: fw: Allow firmware to pass a empty env
  MIPS: Remove deprecated CONFIG_MIPS_CMP
  MIPS: lantiq: remove unused function declaration
  MIPS: Drop unused positional parameter in local_irq_{dis,en}able
  MIPS: mm: Remove local_cache_flush_page
  MIPS: Remove no longer used ide.h
  MIPS: mm: Remove unused *cache_page_indexed flush functions
  MIPS: generic: Enable all CPUs supported by virt board in Kconfig
  MIPS: Add board config for virt board
  MIPS: Octeon: Disable CVMSEG by default on other platforms
  MIPS: Loongson: Don't select platform features with CPU
  ...