- 25 Sep, 2006 27 commits
-
-
Ulrich Kunitz authored
This patch includes a big cleanup of the existing unused LED code, and adds support for controlling the LED. The link LED will blink if the device is not associated. The LED switches between 2 seconds on and 1 second off. If the device is associated the LED is switched on. The link LED also indicates packet TX. I do a little bit more led resetting than the vendor driver, but the device works now as expected for single LED and double LED devices. Signed-off-by:
Ulrich Kunitz <kune@deine-taler.de> Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Ulrich Kunitz authored
For housekeeping and watchdog tasks a workqueue is created. The central workqueue is not used to prevent crashes creates by bugs. It might be changed, when the housekeeping is stabilized. Signed-off-by:
-
Ulrich Kunitz authored
Checking whether a mutex is not locked directly before mutex_lock() is called, doesn't make sense. The whole point of mutex_lock() is to block, if the mutex is locked. Signed-off-by:
-
Ulrich Kunitz authored
Caused by the fact that physical control registers appear to have only a width of 16 bit, 32-bit writes are not required. Signed-off-by:
-
Daniel Drake authored
This mailing list has been deactivated. Signed-off-by:
-
Larry Finger authored
An error message is changed to a printk as the original dprintk would be optimized away if debugging were not enabled. If the error is triggered, a more meaningful message is returned. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
In bcm43xx-softmac, the bcm43xx_stats struct contains a variable that is no longer used. In addition, two TODO entries related to noise processing in bcm43xx_rx have been completed, and as unused one is removed. Signed-off-by:
-
Larry Finger authored
This patch updates the PHY initialization code for bcm43xx-softmac to conform with recent changes in the clean-room specs at http://bcm-specs.sipsolutions.net. Mostly, these changes implement the sequence needed for chips with GPHY revision 8; however, the patch also corrects a typo in one address, and some parts that were missing from the spec when the initial coding was done. Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by:
-
Larry Finger authored
Patch to make bcm43xx-softmac be compatible with the revised SSID length of WE-21. Signed-off-by:
-
Daniel Drake authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
Jean Tourrilhes authored
Signed-off-by:
-
John W. Linville authored
This is version 21 of the Wireless Extensions. Changelog : o finishes migrating the ESSID API (remove the +1) o netdev->get_wireless_stats is no more o long/short retry This is a redacted version of a patch originally submitted by Jean Tourrilhes. I removed most of the additions, in order to minimize future support requirements for nl80211 (or other WE successor). CC: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: -
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
To whoever had written that code: a) priority of >> is higher than that of & b) priority of typecast is higher than that of any binary operator c) learn the fscking C Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
ql3xxx_probe() does ioremap and stores result in ->mem_map_registers. On failure exit it does iounmap() of the same thing. OTOH, ql3xxx_remove() does iounmap() of ->mmap_virt_base which is (a) never assigned and (b) never used other than in that iounmap() call. Signed-off-by:
-
Al Viro authored
the driver is still shite, though... Signed-off-by:
-
Matthew Wilcox authored
Some user tools parse /proc/scsi/scsi, so we can't yet change the names. Change the existing ones back to their old names, and add an admonition to not make the same mistake that I did. Andrew Morton reports that this was breaking YDL 4.1 userspace. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
- 24 Sep, 2006 12 commits
-
-
git://git.infradead.org/~dwmw2/khdrs-2.6Linus Torvalds authored
* git://git.infradead.org/~dwmw2/khdrs-2.6: Don't remove $(INSTALL_HDR_PATH)/install before headers_install.
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
marked as such... Signed-off-by:
-
Al Viro authored
no ioread*(), for one thing Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
David Woodhouse authored
Signed-off-by:David Woodhouse <dwmw2@infradead.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (28 commits) ocfs2: Teach ocfs2_drop_lock() to use ->set_lvb() callback ocfs2: Remove ->unblock lockres operation ocfs2: move downconvert worker to lockres ops ocfs2: Remove unused dlmglue functions ocfs2: Have the metadata lock use generic dlmglue functions ocfs2: Add ->set_lvb callback in dlmglue ocfs2: Add ->check_downconvert callback in dlmglue ocfs2: Check for refreshing locks in generic unblock function ocfs2: don't unconditionally pass LVB flags ocfs2: combine inode and generic blocking AST functions ocfs2: Add ->get_osb() dlmglue locking operation ocfs2: remove ->unlock_ast() callback from ocfs2_lock_res_ops ocfs2: combine inode and generic AST functions ocfs2: Clean up lock resource refresh flags ocfs2: Remove i_generation from inode lock names ocfs2: Encode i_generation in the meta data lvb ocfs2: Free up some space in the lvb ocfs2: Remove special casing for inode creation in ocfs2_dentry_attach_lock() ocfs2: manually d_move() during ocfs2_rename() [PATCH] Allow file systems to manually d_move() inside of ->rename() ...
-
git://git.infradead.org/~dwmw2/khdrs-2.6Linus Torvalds authored
* git://git.infradead.org/~dwmw2/khdrs-2.6: New 'make headers_install_all' target. Use dependencies for 'make headers_install'. [S390] Unexport <asm/z90crypt.h>, export <asm/zcrypt.h> in its place. Remove dead netfilter_logging.h from include/linux/Kbuild Remove offsetof() from user-visible <linux/stddef.h> Clean up exported headers on CRIS Fix v850 exported headers Don't advertise (or allow) headers_{install,check} where inappropriate. Remove UML header export Remove ARM26 header export. Fix H8300 exported headers. Fix m68knommu exported headers Fix exported headers for SPARC, SPARC64 Fix 'make headers_check' on m32r Fix 'make headers_check' on sh64 Fix 'make headers_check' on sh [HEADERS] Fix ARM 'make headers_check' Initial pass of manual conflict resolution in top-level Makefile over conflicting build rule and headers_install changes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (28 commits) kbuild: add distclean info to 'make help' and more details for 'clean' dontdiff: add utsrelease.h kbuild: fix "mkdir -p" usage in scripts/package/mkspec kbuild: correct and clarify versioning info in Makefile kbuild: fixup Documentation/kbuild/modules.txt kbuild: Extend kbuild/defconfig tags support to exuberant ctags kbuild: fix for some typos in Documentation/makefiles.txt kbuild: clarify "make C=" build option Documentaion: update Documentation/Changes with minimum versions kbuild: update help in top level Makefile kbuild: fail kernel compilation in case of unresolved module symbols kbuild: remove debug left-over from Makefile.host kbuild: create output directory for hostprogs with O=.. build kbuild: add missing return statement in modpost.c:secref_whitelist() kbuild: preperly align SYSMAP output kbuild: make -rR is now default kbuild: make V=2 tell why a target is rebuild kbuild: modpost on vmlinux regardless of CONFIG_MODULES kbuild: ignore references from ".pci_fixup" to ".init.text" kbuild: linguistic fixes for Documentation/kbuild/makefiles.txt ...
-
- 25 Sep, 2006 1 commit
-
-
Jesper Juhl authored
Add distclean info, that was previously missing, to 'make help'. Also add a few more details to the 'make clean' help text. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org>
-
