1. 14 Nov, 2014 2 commits
  2. 13 Nov, 2014 4 commits
  3. 12 Nov, 2014 10 commits
  4. 11 Nov, 2014 5 commits
  5. 10 Nov, 2014 11 commits
    • Rabin Vincent's avatar
      tracing: Do not risk busy looping in buffer splice · 07906da7
      Rabin Vincent authored
      If the read loop in trace_buffers_splice_read() keeps failing due to
      memory allocation failures without reading even a single page then this
      function will keep busy looping.
      
      Remove the risk for that by exiting the function if memory allocation
      failures are seen.
      
      Link: http://lkml.kernel.org/r/1415309167-2373-2-git-send-email-rabin@rab.inSigned-off-by: default avatarRabin Vincent <rabin@rab.in>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      07906da7
    • Rabin Vincent's avatar
      tracing: Do not busy wait in buffer splice · e30f53aa
      Rabin Vincent authored
      On a !PREEMPT kernel, attempting to use trace-cmd results in a soft
      lockup:
      
       # trace-cmd record -e raw_syscalls:* -F false
       NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61]
       ...
       Call Trace:
        [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90
        [<ffffffff81092e25>] wait_on_pipe+0x35/0x40
        [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0
        [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0
        [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40
        [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290
        [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0
        [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
        [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60
        [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
        [<ffffffff8112415d>] do_splice_to+0x6d/0x90
        [<ffffffff81126971>] SyS_splice+0x7c1/0x800
        [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8
      
      The problem is this: tracing_buffers_splice_read() calls
      ring_buffer_wait() to wait for data in the ring buffers.  The buffers
      are not empty so ring_buffer_wait() returns immediately.  But
      tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1,
      meaning it only wants to read a full page.  When the full page is not
      available, tracing_buffers_splice_read() tries to wait again with
      ring_buffer_wait(), which again returns immediately, and so on.
      
      Fix this by adding a "full" argument to ring_buffer_wait() which will
      make ring_buffer_wait() wait until the writer has left the reader's
      page, i.e.  until full-page reads will succeed.
      
      Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in
      
      Cc: stable@vger.kernel.org # 3.16+
      Fixes: b1169cc6 ("tracing: Remove mock up poll wait function")
      Signed-off-by: default avatarRabin Vincent <rabin@rab.in>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      e30f53aa
    • Joe Thornber's avatar
      dm btree: fix a recursion depth bug in btree walking code · 9b460d36
      Joe Thornber authored
      The walk code was using a 'ro_spine' to hold it's locked btree nodes.
      But this data structure is designed for the rolling lock scheme, and
      as such automatically unlocks blocks that are two steps up the call
      chain.  This is not suitable for the simple recursive walk algorithm,
      which retraces its steps.
      
      This code is only used by the persistent array code, which in turn is
      only used by dm-cache.  In order to trigger it you need to have a
      mapping tree that is more than 2 levels deep; which equates to 8-16
      million cache blocks.  For instance a 4T ssd with a very small block
      size of 32k only just triggers this bug.
      
      The fix just places the locked blocks on the stack, and stops using
      the ro_spine altogether.
      Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Cc: stable@vger.kernel.org
      9b460d36
    • Tony Lindgren's avatar
      mfd: twl4030-power: Fix poweroff with PM configuration enabled · 481c7f86
      Tony Lindgren authored
      Commit e7cd1d1e ("mfd: twl4030-power: Add generic reset
      configuration") enabled configuring the PM features for twl4030.
      
      This caused poweroff command to fail on devices that have the
      BCI charger on twl4030 wired, or have power wired for VBUS.
      Instead of powering off, the device reboots. This is because
      voltage is detected on charger or VBUS with the default bits
      enabled for the power transition registers.
      
      To fix the issue, let's just clear VBUS and CHG bits as we want
      poweroff command to keep the system powered off.
      
      Fixes: e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration")
      Cc: stable@vger.kernel.org # v3.16+
      Reported-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      481c7f86
    • Krzysztof Kozlowski's avatar
      mfd: max77693: Fix always masked MUIC interrupts · c0acb814
      Krzysztof Kozlowski authored
      All interrupts coming from MUIC were ignored because interrupt source
      register was masked.
      
      The Maxim 77693 has a "interrupt source" - a separate register and interrupts
      which give information about PMIC block triggering the individual
      interrupt (charger, topsys, MUIC, flash LED).
      
      By default bootloader could initialize this register to "mask all"
      value. In such case (observed on Trats2 board) MUIC interrupts won't be
      generated regardless of their mask status. Regmap irq chip was unmasking
      individual MUIC interrupts but the source was masked
      
      Before introducing regmap irq chip this interrupt source was unmasked,
      read and acked. Reading and acking is not necessary but unmasking is.
      
      Fixes: 342d669c ("mfd: max77693: Handle IRQs using regmap")
      
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
      Reviewed-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      c0acb814
    • Krzysztof Kozlowski's avatar
      mfd: max77693: Use proper regmap for handling MUIC interrupts · 43fc9396
      Krzysztof Kozlowski authored
      Interrupts coming from Maxim77693 MUIC block (MicroUSB Interface
      Controller) were not handled at all because wrong regmap was used for
      MUIC's regmap_irq_chip.
      
      The MUIC component of Maxim 77693 uses different I2C address thus second
      regmap is created and used by max77693 extcon driver. The registers for
      MUIC interrupts are also in that block and should be handled by that
      second regmap.
      
      However the regmap irq chip for MUIC was configured with default regmap
      which could not read MUIC registers.
      
      Fixes: 342d669c ("mfd: max77693: Handle IRQs using regmap")
      
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
      Reviewed-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      43fc9396
    • Johan Hovold's avatar
      mfd: viperboard: Fix platform-device id collision · b6684228
      Johan Hovold authored
      Allow more than one viperboard to be connected by registering with
      PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE.
      
      The subdevices are currently registered with PLATFORM_DEVID_NONE, which
      will cause a name collision on the platform bus when a second viperboard
      is plugged in:
      
      viperboard 1-2.4:1.0: version 0.00 found at bus 001 address 004
      ------------[ cut here ]------------
      WARNING: CPU: 0 PID: 181 at /home/johan/work/omicron/src/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x74/0x84()
      sysfs: cannot create duplicate filename '/bus/platform/devices/viperboard-gpio'
      Modules linked in: i2c_viperboard viperboard netconsole [last unloaded: viperboard]
      CPU: 0 PID: 181 Comm: bash Tainted: G        W      3.17.0-rc6 #1
      [<c0016bf4>] (unwind_backtrace) from [<c0013860>] (show_stack+0x20/0x24)
      [<c0013860>] (show_stack) from [<c04305f8>] (dump_stack+0x24/0x28)
      [<c04305f8>] (dump_stack) from [<c0040fb4>] (warn_slowpath_common+0x80/0x98)
      [<c0040fb4>] (warn_slowpath_common) from [<c004100c>] (warn_slowpath_fmt+0x40/0x48)
      [<c004100c>] (warn_slowpath_fmt) from [<c016f1bc>] (sysfs_warn_dup+0x74/0x84)
      [<c016f1bc>] (sysfs_warn_dup) from [<c016f548>] (sysfs_do_create_link_sd.isra.2+0xcc/0xd0)
      [<c016f548>] (sysfs_do_create_link_sd.isra.2) from [<c016f588>] (sysfs_create_link+0x3c/0x48)
      [<c016f588>] (sysfs_create_link) from [<c02867ec>] (bus_add_device+0x12c/0x1e0)
      [<c02867ec>] (bus_add_device) from [<c0284820>] (device_add+0x410/0x584)
      [<c0284820>] (device_add) from [<c0289440>] (platform_device_add+0xd8/0x26c)
      [<c0289440>] (platform_device_add) from [<c02a5ae4>] (mfd_add_device+0x240/0x344)
      [<c02a5ae4>] (mfd_add_device) from [<c02a5ce0>] (mfd_add_devices+0xb8/0x110)
      [<c02a5ce0>] (mfd_add_devices) from [<bf00d1c8>] (vprbrd_probe+0x160/0x1b0 [viperboard])
      [<bf00d1c8>] (vprbrd_probe [viperboard]) from [<c030c000>] (usb_probe_interface+0x1bc/0x2a8)
      [<c030c000>] (usb_probe_interface) from [<c028768c>] (driver_probe_device+0x14c/0x3ac)
      [<c028768c>] (driver_probe_device) from [<c02879e4>] (__driver_attach+0xa4/0xa8)
      [<c02879e4>] (__driver_attach) from [<c0285698>] (bus_for_each_dev+0x70/0xa4)
      [<c0285698>] (bus_for_each_dev) from [<c0287030>] (driver_attach+0x2c/0x30)
      [<c0287030>] (driver_attach) from [<c030a288>] (usb_store_new_id+0x170/0x1ac)
      [<c030a288>] (usb_store_new_id) from [<c030a2f8>] (new_id_store+0x34/0x3c)
      [<c030a2f8>] (new_id_store) from [<c02853ec>] (drv_attr_store+0x30/0x3c)
      [<c02853ec>] (drv_attr_store) from [<c016eaa8>] (sysfs_kf_write+0x5c/0x60)
      [<c016eaa8>] (sysfs_kf_write) from [<c016dc68>] (kernfs_fop_write+0xd4/0x194)
      [<c016dc68>] (kernfs_fop_write) from [<c010fe40>] (vfs_write+0xb4/0x1c0)
      [<c010fe40>] (vfs_write) from [<c01104a8>] (SyS_write+0x4c/0xa0)
      [<c01104a8>] (SyS_write) from [<c000f900>] (ret_fast_syscall+0x0/0x48)
      ---[ end trace 98e8603c22d65817 ]---
      viperboard 1-2.4:1.0: Failed to add mfd devices to core.
      viperboard: probe of 1-2.4:1.0 failed with error -17
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      b6684228
    • Thierry Reding's avatar
      mfd: rtsx: Fix build warnings for !PM · 451be648
      Thierry Reding authored
      rtsx_pci_power_off() is called only from rtsx_pci_suspend(), which isn't
      built when PM is disabled.
      Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      451be648
    • Linus Walleij's avatar
      mfd: stmpe: Fix STMPE24xx GPMR LSB · 871c3cf4
      Linus Walleij authored
      The least significat byte of the GPIO value read register
      on the STMPE24xx series is on addres 0xA4 not 0xA5. Correct
      against datasheet and tested on the STMPE2401 hardware.
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      871c3cf4
    • Chris Zankel's avatar
      Merge tag 'v3.18-rc4' into for_next · aeb58973
      Chris Zankel authored
      Linux 3.18-rc4
      aeb58973
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2014-11-07' of git://anongit.freedesktop.org/drm-intel into drm-fixes · 03dca708
      Dave Airlie authored
      Black screen, screen corruption, hardware state corruption fixes.
      
      * tag 'drm-intel-fixes-2014-11-07' of git://anongit.freedesktop.org/drm-intel:
        drm/i915: safeguard against too high minimum brightness
        drm/i915: vlv: fix gunit HW state corruption during S4 suspend
        drm/i915: Disable caches for Global GTT.
      03dca708
  6. 09 Nov, 2014 8 commits