The box_ids only save the unit ID for the first die. If a unit, e.g., a
CXL unit, doesn't exist in the first die. The unit ID cannot be
retrieved.

The unit control RB tree also stores the unit ID information.
Retrieve the unit ID from the unit control RB tree
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-4-kan.liang@linux.intel.com

The cpumask of some uncore units, e.g., CXL uncore units, may be wrong
under some configurations. Perf may access an uncore counter of a
non-existent uncore unit.

The uncore driver assumes that all uncore units are symmetric among
dies. A global cpumask is shared among all uncore PMUs. However, some
CXL uncore units may only be available on some dies.

A per PMU cpumask is introduced to track the CPU mask of this PMU.
The driver searches the unit control RB tree to check whether the PMU is
available on a given die, and updates the per PMU cpumask accordingly.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yunying Sun <yunying.sun@intel.com>
Link: https://lore.kernel.org/r/20240614134631.1092359-3-kan.liang@linux.intel.com

The unit control address of some CXL units may be wrongly calculated
under some configuration on a EMR machine.

The current implementation only saves the unit control address of the
units from the first die, and the first unit of the rest of dies. Perf
assumed that the units from the other dies have the same offset as the
first die. So the unit control address of the rest of the units can be
calculated. However, the assumption is wrong, especially for the CXL
units.

Introduce an RB tree for each uncore type to save the unit control
address and three kinds of ID information (unit ID, PMU ID, and die ID)
for all units.
The unit ID is a physical ID of a unit.
The PMU ID is a logical ID assigned to a unit. The logical IDs start
from 0 and must be contiguous. The physical ID and the logical ID are
1:1 mapping. The units with the same physical ID in different dies share
the same PMU.
The die ID indicates which die a unit belongs to.

The RB tree can be searched by two different keys (unit ID or PMU ID +
die ID). During the RB tree setup, the unit ID is used as a key to look
up the RB tree. The perf can create/assign a proper PMU ID to the unit.
Later, after the RB tree is setup, PMU ID + die ID is used as a key to
look up the RB tree to fill the cpumask of a PMU. It's used more
frequently, so PMU ID + die ID is compared in the unit_less().
The uncore_find_unit() has to be O(N). But the RB tree setup only occurs
once during the driver load time. It should be acceptable.

Compared with the current implementation, more space is required to save
the information of all units. The extra size should be acceptable.
For example, on EMR, there are 221 units at most. For a 2-socket machine,
the extra space is ~6KB at most.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240614134631.1092359-2-kan.liang@linux.intel.com

Replace this pattern in events/amd/{un,}core.c:

    cmpxchg(*ptr, old, new) == old

... with the simpler and faster:

    try_cmpxchg(*ptr, &old, new)

The x86 CMPXCHG instruction returns success in the ZF flag, so this change
saves a compare after the CMPXCHG.

No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240425101708.5025-1-ubizjak@gmail.com

Use of this structure was removed in:

  8f2a28c5 ("perf/x86/cstate: Use new probe function")

Remove the now stale type as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

AMD CPUs have the scope of RAPL energy-pkg event as package, whereas
Intel Cascade Lake CPUs have the scope as die.

To account for the difference in the energy-pkg event scope between AMD
and Intel CPUs, give more generic and semantically correct names to the
maxdie and dieid variables.

No functional change.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240502095115.177713-2-Dhananjay.Ugwekar@amd.com

We are going to fix perf-events fallout of changes in tip:x86/cpu,
so merge in that branch first.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

To support APX functionality, the EVEX prefix is used to:

 - promote legacy instructions
 - promote VEX instructions
 - add new instructions

Promoted VEX instructions require no extra annotation because the opcodes
do not change and the permissive nature of the instruction decoder already
allows them to have an EVEX prefix.

Promoted legacy instructions and new instructions are placed in map 4 which
has not been used before.

Create a new table for map 4 and add APX instructions.

Annotate SCALABLE instructions with "(es)" - refer to patch "x86/insn: Add
support for APX EVEX to the instruction decoder logic". SCALABLE
instructions must be represented in both no-prefix (NP) and 66 prefix
forms.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-9-adrian.hunter@intel.com

Intel Advanced Performance Extensions (APX) extends the EVEX prefix to
support:

 - extended general purpose registers (EGPRs) i.e. r16 to r31
 - Push-Pop Acceleration (PPX) hints
 - new data destination (NDD) register
 - suppress status flags writes (NF) of common instructions
 - new instructions

Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.

The extended EVEX prefix does not need amended instruction decoder logic,
except in one area. Some instructions are defined as SCALABLE which means
the EVEX.W bit and EVEX.pp bits are used to determine operand size.
Specifically, if an instruction is SCALABLE and EVEX.W is zero, then
EVEX.pp value 0 (representing no prefix NP) means default operand size,
whereas EVEX.pp value 1 (representing 66 prefix) means operand size
override i.e. 16 bits

Add an attribute (INAT_EVEX_SCALABLE) to identify such instructions, and
amend the logic appropriately.

Amend the awk script that generates the attribute tables from the opcode
map, to recognise "(es)" as attribute INAT_EVEX_SCALABLE.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-8-adrian.hunter@intel.com

Support for REX2 has been added to the instruction decoder logic and the
awk script that generates the attribute tables from the opcode map.

Add REX2 prefix byte (0xD5) to the opcode map.

Add annotation (!REX2) for map 0/1 opcodes that are reserved under REX2.

Add JMPABS to the opcode map and add annotation (REX2) to identify that it
has a mandatory REX2 prefix. A separate opcode attribute table is not
needed at this time because JMPABS has the same attribute encoding as the
MOV instruction that it shares an opcode with i.e. INAT_MOFFSET.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-7-adrian.hunter@intel.com

Intel Advanced Performance Extensions (APX) uses a new 2-byte prefix named
REX2 to select extended general purpose registers (EGPRs) i.e. r16 to r31.

The REX2 prefix is effectively an extended version of the REX prefix.

REX2 and EVEX are also used with PUSH/POP instructions to provide a
Push-Pop Acceleration (PPX) hint. With PPX hints, a CPU will attempt to
fast-forward register data between matching PUSH and POP instructions.

REX2 is valid only with opcodes in maps 0 and 1. Similar extension for
other maps is provided by the EVEX prefix, covered in a separate patch.

Some opcodes in maps 0 and 1 are reserved under REX2. One of these is used
for a new 64-bit absolute direct jump instruction JMPABS.

Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.

Define a code value for the REX2 prefix (INAT_PFX_REX2), and add attribute
flags for opcodes reserved under REX2 (INAT_NO_REX2) and to identify
opcodes (only JMPABS) that require a mandatory REX2 prefix
(INAT_REX2_VARIANT).

Amend logic to read the REX2 prefix and get the opcode attribute for the
map number (0 or 1) encoded in the REX2 prefix.

Amend the awk script that generates the attribute tables from the opcode
map, to recognise "REX2" as attribute INAT_PFX_REX2, and "(!REX2)"
as attribute INAT_NO_REX2, and "(REX2)" as attribute INAT_REX2_VARIANT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-6-adrian.hunter@intel.com

The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.

Add instructions documented in Intel Architecture Instruction Set
Extensions and Future Features Programming Reference March 2024
319433-052, that have not been added yet:

	AADD
	AAND
	AOR
	AXOR
	CMPccXADD
	PBNDKB
	RDMSRLIST
	URDMSR
	UWRMSR
	VBCSTNEBF162PS
	VBCSTNESH2PS
	VCVTNEEBF162PS
	VCVTNEEPH2PS
	VCVTNEOBF162PS
	VCVTNEOPH2PS
	VCVTNEPS2BF16
	VPDPB[SU,UU,SS]D[,S]
	VPDPW[SU,US,UU]D[,S]
	VPMADD52HUQ
	VPMADD52LUQ
	VSHA512MSG1
	VSHA512MSG2
	VSHA512RNDS2
	VSM3MSG1
	VSM3MSG2
	VSM3RNDS2
	VSM4KEY4
	VSM4RNDS4
	WRMSRLIST
	TCMMIMFP16PS
	TCMMRLFP16PS
	TDPFP16PS
	PREFETCHIT1
	PREFETCHIT0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-5-adrian.hunter@intel.com

The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.

Intel Architecture Instruction Set Extensions and Future Features manual
number 319433-044 of May 2021, documented VEX versions of instructions
VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, but the opcode map has them
listed as EVEX only.

Remove EVEX-only (ev) annotation from instructions VPDPBUSD, VPDPBUSDS,
VPDPWSSD and VPDPWSSDS, which allows them to be decoded with either a VEX
or EVEX prefix.

Fixes: 0153d98f ("x86/insn: Add misc instructions to x86 instruction decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-4-adrian.hunter@intel.com

The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.

Opcode 0x68 PUSH instruction is currently defined as 64-bit operand size
only i.e. (d64). That was based on Intel SDM Opcode Map. However that is
contradicted by the Instruction Set Reference section for PUSH in the
same manual.

Remove 64-bit operand size only annotation from opcode 0x68 PUSH
instruction.

Example:

  $ cat pushw.s
  .global  _start
  .text
  _start:
          pushw   $0x1234
          mov     $0x1,%eax   # system call number (sys_exit)
          int     $0x80
  $ as -o pushw.o pushw.s
  $ ld -s -o pushw pushw.o
  $ objdump -d pushw | tail -4
  0000000000401000 <.text>:
    401000:       66 68 34 12             pushw  $0x1234
    401004:       b8 01 00 00 00          mov    $0x1,%eax
    401009:       cd 80                   int    $0x80
  $ perf record -e intel_pt//u ./pushw
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.014 MB perf.data ]

 Before:

  $ perf script --insn-trace=disasm
  Warning:
  1 instruction trace errors
           pushw   10349 [000] 10586.869237014:            401000 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw)           pushw $0x1234
           pushw   10349 [000] 10586.869237014:            401006 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw)           addb %al, (%rax)
           pushw   10349 [000] 10586.869237014:            401008 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw)           addb %cl, %ch
           pushw   10349 [000] 10586.869237014:            40100a [unknown] (/home/ahunter/git/misc/rtit-tests/pushw)           addb $0x2e, (%rax)
   instruction trace error type 1 time 10586.869237224 cpu 0 pid 10349 tid 10349 ip 0x40100d code 6: Trace doesn't match instruction

 After:

  $ perf script --insn-trace=disasm
             pushw   10349 [000] 10586.869237014:            401000 [unknown] (./pushw)           pushw $0x1234
             pushw   10349 [000] 10586.869237014:            401004 [unknown] (./pushw)           movl $1, %eax

Fixes: eb13296c ("x86: Instruction decoder API")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-3-adrian.hunter@intel.com

The x86 instruction decoder needs to know these new instructions that
are going to be used in the crypto library as well as the x86 core
code. Add the following:

LOADIWKEY:
	Load a CPU-internal wrapping key.

ENCODEKEY128:
	Wrap a 128-bit AES key to a key handle.

ENCODEKEY256:
	Wrap a 256-bit AES key to a key handle.

AESENC128KL:
	Encrypt a 128-bit block of data using a 128-bit AES key
	indicated by a key handle.

AESENC256KL:
	Encrypt a 128-bit block of data using a 256-bit AES key
	indicated by a key handle.

AESDEC128KL:
	Decrypt a 128-bit block of data using a 128-bit AES key
	indicated by a key handle.

AESDEC256KL:
	Decrypt a 128-bit block of data using a 256-bit AES key
	indicated by a key handle.

AESENCWIDE128KL:
	Encrypt 8 128-bit blocks of data using a 128-bit AES key
	indicated by a key handle.

AESENCWIDE256KL:
	Encrypt 8 128-bit blocks of data using a 256-bit AES key
	indicated by a key handle.

AESDECWIDE128KL:
	Decrypt 8 128-bit blocks of data using a 128-bit AES key
	indicated by a key handle.

AESDECWIDE256KL:
	Decrypt 8 128-bit blocks of data using a 256-bit AES key
	indicated by a key handle.

The detail can be found in Intel Software Developer Manual.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502105853.5338-2-adrian.hunter@intel.com

Signed-off-by: Ingo Molnar <mingo@kernel.org>

New CPU #defines encode vendor and family as well as model.

[ dhansen: vertically align 0's in invlpg_miss_ids[] ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181518.41946-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181518.41927-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181517.41907-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.

[ dhansen: vertically align macro and remove stray subject / ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181516.41887-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.

  [ bp: Squash two resctrl patches into one. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181514.41848-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181513.41829-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.

  [ bp: Squash *three* mce patches into one, fold in fix:
    https://lore.kernel.org/r/20240429022051.63360-1-tony.luck@intel.com ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181511.41772-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181511.41753-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181510.41733-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181505.41654-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181504.41634-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181503.41614-1-tony.luck%40intel.com

New CPU #defines encode vendor and family as well as model.

  [ bp: Squash *three* uncore patches into one. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240424181501.41557-1-tony.luck%40intel.com

Pull scheduler fixes from Ingo Molnar:

 - Fix EEVDF corner cases

 - Fix two nohz_full= related bugs that can cause boot crashes
   and warnings

* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
  sched/isolation: Prevent boot crash when the boot CPU is nohz_full
  sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
  sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
  sched/eevdf: Always update V if se->on_rq when reweighting

Pull x86 fixes from Ingo Molnar:

 - Make the CPU_MITIGATIONS=n interaction with conflicting
   mitigation-enabling boot parameters a bit saner.

 - Re-enable CPU mitigations by default on non-x86

 - Fix TDX shared bit propagation on mprotect()

 - Fix potential show_regs() system hang when PKE initialization
   is not fully finished yet.

 - Add the 0x10-0x1f model IDs to the Zen5 range

 - Harden #VC instruction emulation some more

* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
  cpu: Re-enable CPU mitigations by default for !X86 architectures
  x86/tdx: Preserve shared bit on mprotect()
  x86/cpu: Fix check for RDPKRU in __show_regs()
  x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
  x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler

Pull irq fix from Ingo Molnar:
 "Fix a double free bug in the init error path of the GICv3 irqchip
  driver"

* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Prevent double free on error

housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.

For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.

Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.

Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().

And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.

Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com

Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:

  08ae95f4 ("nohz_full: Allow the boot CPU to be nohz_full").

However after:

  aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")

the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.

Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.

This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.

There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).

Fixes: aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/

Pull Rust fixes from Miguel Ojeda:

 - Soundness: make internal functions generated by the 'module!' macro
   inaccessible, do not implement 'Zeroable' for 'Infallible' and
   require 'Send' for the 'Module' trait.

 - Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.

 - Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.

 - Code docs: remove non-existing key from 'module!' macro example.

 - Docs: trivial rendering fix in arch table.

* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
  rust: remove `params` from `module` macro example
  kbuild: rust: force `alloc` extern to allow "empty" Rust files
  kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
  rust: kernel: require `Send` for `Module` implementations
  rust: phy: implement `Send` for `Registration`
  rust: make mutually exclusive with CFI_CLANG
  rust: macros: fix soundness issue in `module!` macro
  rust: init: remove impl Zeroable for Infallible
  docs: rust: fix improper rendering in Arch Support page
  rust: don't select CONSTRUCTORS

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
   separation

 - A fix to avoid loading rv64/NOMMU kernel past the start of RAM

 - A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
   overflow in the bitmask

 - The sud_test kselftest has been fixed to properly swizzle the syscall
   number into the return register, which are not the same on RISC-V

 - A fix for a build warning in the perf tools on rv32

 - A fix for the CBO selftests, to avoid non-constants leaking into the
   inline asm

 - A pair of fixes for T-Head PBMT errata probing, which has been
   renamed MAE by the vendor

* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
  perf riscv: Fix the warning due to the incompatible type
  riscv: T-Head: Test availability bit before enabling MAE errata
  riscv: thead: Rename T-Head PBMT to MAE
  selftests: sud_test: return correct emulated syscall value on RISC-V
  riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
  riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
  riscv: Fix TASK_SIZE on 64-bit NOMMU

Pull smb client fixes from Steve French:
 "Three smb3 client fixes, all also for stable:

   - two small locking fixes spotted by Coverity

   - FILE_ALL_INFO and network_open_info packing fix"

* tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix lock ordering potential deadlock in cifs_sync_mid_result
  smb3: missing lock when picking channel
  smb: client: Fix struct_group() usage in __packed structs

Pull i2c fixes from Wolfram Sang:
 "Fix a race condition in the at24 eeprom handler, a NULL pointer
  exception in the I2C core for controllers only using target modes,
  drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"

* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: smbus: fix NULL function pointer dereference
  MAINTAINERS: Drop entry for PCA9541 bus master selector
  eeprom: at24: fix memory corruption race condition
  dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema

create_prof_cpu_mask() is no longer used after commit 1f44a225 ("s390:
convert interrupt handling to use generic hardirq").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>