- 14 Aug, 2023 1 commit
-
-
Suraj Kandpal authored
On checking DSC1.1 Errata and DSC 1.2 spec the current formula we were using was incorrect to calculate first_line_bpg_offset. The new fixed formula is derived from C model. --v2 -Use clamp function in linux/minmax.h [Ankit] --v3 -remove linux/minmax.h header Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
- 11 Aug, 2023 3 commits
-
-
Imre Deak authored
As described in the previous patch a connector shouldn't change its status while it's forced to a connected/disconnected state. This can still happen while running the connector detect function to account for lost HPD events in a low-power state. Fix this by reusing the connector detect function which handles a hotplug event and prevents updating the status for forced connectors as expected. Testcase: igt@kms_force_connector_basic@force-connector-state Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230809104307.1218058-3-imre.deak@intel.com
-
Imre Deak authored
DRM display connectors forced to a connected/disconnected state via the drm_connector::force member shouldn't change their status. Atm, this can still happen in the connector's detect function when called to handle a hotplug event. This in turn may lead to the GETCONNECTOR ioctl to report the incorrect state if it's called to return the connector properties without doing an actual detection (by calling the ioctl with a non-zero drm_mode_get_connector::count_modes). Fix the above by updating the connector state during hotplug detect only if the connector state is not forced. Testcase: igt@kms_force_connector_basic@force-connector-state Signed-off-by:
-
Imre Deak authored
The issue fixed in commit a8ddac7c ("drm/i915: Avoid HPD poll detect triggering a new detect cycle") on VLV, CHV is still present on platforms where the display hotplug detection functionality is available whenever the device is in D0 state (hence these platforms switch to HPD polling only when the device is runtime suspended). The above commit avoids an endless i915_hpd_poll_init_work() -> connector detect loop by making sure that by the end of i915_hpd_poll_init_work() all display power references acquired by the connector detect functions which can trigger a new cycle (display core power domain) are dropped. However on platforms where HPD polling is enabled/disabled only from the runtime suspend/resume handlers, this is not ensured: for instance eDP VDD, TypeC port PHYs and the runtime autosuspend delay may still keep the device runtime resumed (via a power reference acquired during connector detection and hence result in an endless loop like the above). Solve the problem described in the above commit on all platforms, by making sure that a i915_hpd_poll_init_work() -> connector detect sequence can't take any power reference in the first place which would trigger a new cycle, instead of relying on these power references to be dropped by the end of the sequence. With the default runtime autosuspend delay (10 sec) this issue didn't happen in practice, since the device remained runtime resumed for the whole duration of the above sequence. CI/IGT tests however set the autosuspend delay to 0, which makes the problem visible, see References: below. Tested on GLK, CHV. v2: Don't warn about a requeued work, to account for disabling polling directly during driver loading, reset and system resume. References: https://gitlab.freedesktop.org/drm/intel/-/issues/7940#note_1997403Signed-off-by:
-
- 10 Aug, 2023 6 commits
-
-
Jani Nikula authored
Unify on making the calls from display code. Need to add an if ladder in gen8_de_irq_postinstall() for now, but the function looks like it could be overall be better split by platform. Something for the future. The display version check for mtp seems a bit suspect, but this matches current code. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fe51744aec9e2f465caf0d699b8a15591859f89e.1691509966.git.jani.nikula@intel.com
-
Jani Nikula authored
Add a dedicated de postinstall function. Signed-off-by:
-
Jani Nikula authored
Add a dedicated de postinstall function. Signed-off-by:
-
Jani Nikula authored
Continue splitting display from the rest. Signed-off-by:
-
Jani Nikula authored
Debug log similar to the device id based identification of no display. Reviewed-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Jani Nikula authored
The current display probe is unable to differentiate between IVB Q and IVB D GT2 server, as they both have the same device id, but different subvendor and subdevice. This leads to the latter being misidentified as the former, and should just end up not having a display. However, the no display case returns a NULL as the display device info, and promptly oopses. As the IVB Q case is rare, and we're anyway moving towards GMD ID, handle the identification requiring subvendor and subdevice as a special case first, instead of unnecessarily growing the intel_display_ids[] array with subvendor and subdevice. [ 5.425298] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 5.426059] #PF: supervisor read access in kernel mode [ 5.426810] #PF: error_code(0x0000) - not-present page [ 5.427570] PGD 0 P4D 0 [ 5.428285] Oops: 0000 [#1] PREEMPT SMP PTI [ 5.429035] CPU: 0 PID: 137 Comm: (udev-worker) Not tainted 6.4.0-1-amd64 #1 Debian 6.4.4-1 [ 5.429759] Hardware name: HP HP Z220 SFF Workstation/HP Z220 SFF Workstation, BIOS 4.19-218-gb184e6e0a1 02/02/2023 [ 5.430485] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.431338] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.432920] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.433707] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.434494] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.435277] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.436055] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.436867] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.437646] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.438434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.439218] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 [ 5.440009] Call Trace: [ 5.440824] <TASK> [ 5.441611] ? __die+0x23/0x70 [ 5.442394] ? page_fault_oops+0x17d/0x4c0 [ 5.443173] ? exc_page_fault+0x7f/0x180 [ 5.443949] ? asm_exc_page_fault+0x26/0x30 [ 5.444756] ? intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.445652] ? intel_device_info_driver_create+0xea/0x120 [i915] [ 5.446545] i915_driver_probe+0x7f/0xb60 [i915] [ 5.447431] ? drm_privacy_screen_get+0x15c/0x1a0 [drm] [ 5.448240] local_pci_probe+0x45/0xa0 [ 5.449013] pci_device_probe+0xc7/0x240 [ 5.449748] really_probe+0x19e/0x3e0 [ 5.450464] ? __pfx___driver_attach+0x10/0x10 [ 5.451172] __driver_probe_device+0x78/0x160 [ 5.451870] driver_probe_device+0x1f/0x90 [ 5.452601] __driver_attach+0xd2/0x1c0 [ 5.453293] bus_for_each_dev+0x88/0xd0 [ 5.453989] bus_add_driver+0x116/0x220 [ 5.454672] driver_register+0x59/0x100 [ 5.455336] i915_init+0x25/0xc0 [i915] [ 5.456104] ? __pfx_i915_init+0x10/0x10 [i915] [ 5.456882] do_one_initcall+0x5d/0x240 [ 5.457511] do_init_module+0x60/0x250 [ 5.458126] __do_sys_finit_module+0xac/0x120 [ 5.458721] do_syscall_64+0x60/0xc0 [ 5.459314] ? syscall_exit_to_user_mode+0x1b/0x40 [ 5.459897] ? do_syscall_64+0x6c/0xc0 [ 5.460510] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 5.461082] RIP: 0033:0x7febd20b0eb9 [ 5.461648] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2f 1f 0d 00 f7 d8 64 89 01 48 [ 5.462905] RSP: 002b:00007fffabb1ba78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 5.463554] RAX: ffffffffffffffda RBX: 0000561e6304f410 RCX: 00007febd20b0eb9 [ 5.464201] RDX: 0000000000000000 RSI: 00007febd2244f0d RDI: 0000000000000015 [ 5.464869] RBP: 00007febd2244f0d R08: 0000000000000000 R09: 000000000000000a [ 5.465512] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000020000 [ 5.466124] R13: 0000000000000000 R14: 0000561e63032b60 R15: 000000000000000a [ 5.466700] </TASK> [ 5.467271] Modules linked in: i915(+) drm_buddy video crc32_pclmul sr_mod hid_generic wmi crc32c_intel i2c_algo_bit sd_mod cdrom drm_display_helper cec usbhid rc_core ghash_clmulni_intel hid sha512_ssse3 ttm sha512_generic xhci_pci ehci_pci xhci_hcd ehci_hcd nvme ahci drm_kms_helper nvme_core libahci t10_pi libata psmouse aesni_intel scsi_mod crypto_simd i2c_i801 scsi_common crc64_rocksoft_generic cryptd i2c_smbus drm lpc_ich crc64_rocksoft crc_t10dif e1000e usbcore crct10dif_generic usb_common crct10dif_pclmul crc64 crct10dif_common button [ 5.469750] CR2: 0000000000000000 [ 5.470364] ---[ end trace 0000000000000000 ]--- [ 5.470971] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.471699] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.473034] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.473698] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.474371] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.475045] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.475725] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.476405] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.477124] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.477811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.478499] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 Fixes: 69d43981 ("drm/i915/display: Make display responsible for probing its own IP") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8991 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
- 08 Aug, 2023 1 commit
-
-
Luca Coelho authored
When intel_display_device_probe() (and, subsequently, probe_gmdid_display()) returns, the caller expects ver, rel and step to be initialized. Since there's no way to check that there was a failure and no_display was returned without some further refactoring, pre-initiliaze all these values to zero to keep it simple and safe. Signed-off-by:
-
- 07 Aug, 2023 22 commits
-
-
Dnyaneshwar Bhadane authored
Driver refers to the platform Alderlake S as ADLS_RPLS in places and RAPTORLAKE_S in some. v2: - Unrolled wrapper IS_ADLS_GRAPHICS_STEP v3: - Replace IS_RAPTORLAKE_S instead of IS_ADLS_RPLS. (Tvrtko/Lucas). - Remove unused macro IS_ADLS_GRAPHICS/DISPLAY_STEP - Change the subject Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Acked-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230801135344.3797924-15-dnyaneshwar.bhadane@intel.com
-
Anusha Srivatsa authored
Follow consistent naming convention. Replace ADLP with ALDERLAKE_P Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace ADLP with ALDERLAKE_P v2: - Replace IS_ADLP_RPLU with IS_RAPTORLAKE_U (Tvrtko/Lucas) - Change the subject Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace ADLP with ALDERLAKE_P. v2: - Replace IS_ADLP_RPLP with IS_RAPTORLAKE_P. (Tvrtko/Lucas) - Change the subject Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Driver refers to the platform Alderlake P as ADLP in places and ALDERLAKE_P in some. Making the consistent change to avoid confusion of the right naming convention for the platform. v2: - Unrolled wrapper IS_ADLP_GRAPHICS_STEP and Replace - Added IS_ALDERLAKE_P() && IS_GRAPHICS_STEP() (Jani/Tvrtko). v3: - Removed unused macros of display steps. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace TGL with TIGERLAKE.Replace IS_TGL_DISPLAY_STEP with IS_TIGERLAKE() && IS_DISPLAY_STEP(). v2: - s/TGL/tgl in the subject prefix(Anusha) v3: - Unrolled wrapper IS_TGL_DISPLAY_STEP and Replace - Replace IS_PLATFORM && DISPLAY_STEP (Jani/Tvrtko). v4: - Removed unused macros Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace JSL with JASPERLAKE. Unroll IS_JSL_EHL() define with IS_JASPERLAKE() || IS_ELKHARTLAKE() condition. Change in the display step define for Jasperlake. v2: - Change subject prefix skl instead of SKL(Anusha) v3: - Remove the use of define IS_JSL_EHL. - Replace with IS_JASPERLAKE() || IS_ELKHARTLAKE() - Unrolled wrapper IS_JSL_ELK_DISPLAY_STEP (Jani/Tvrtko) v4: - Removed unused macro v5: - Resolved valid checkpatch warning(Jani) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace RKL with ROCKETLAKE.Replace IS_RKL_GRAPHICS_STEP with IS_ROCKETLAKE && IS_DISPLAY_STEP. v2: - s/RKL/rkl in the subject prefix(Anusha) v3: - Unrolled wrapper IS_RKL_DISPLAY_STEP. - Replace IS_PLATFORM && IS_DISPLAY_STEP (Jani/Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace CML with COMETLAKE. Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace CFL with COFFEELAKE. Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace KBL with KABYLAKE.Replace IS_KBL_GRAPHICS_STEP with IS_KABYLAKE () && IS_GRAPHICS_STEP(). v2: - s/KBL/kbl in the subject prefix(Anusha) v3: - Unrolled wrapper IS_KBL_GRAPHICS_STEP. - Replace with IS_PLATFORM && DISPLAY_STEP(tvrtko/jani) v4: - Removed unused macro. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <Anusha.Srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace SKL with SKYLAKE and Replace IS_SKL_GRAPHICS_STEP with IS_SKYLAKE() && IS_GRAPHICS_STEP(). v2: - Change subject skl instead of SKL(Anusha) v3: - Unrolled wrapper IS_SKL_GRAPHICS_STEP. - Replace with IS_PLATFORM && DISPLAY_STEP(tvrtko/jani) v4: - Removed the unused macro. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace BDW with BROADWELL. Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace HSW with HASWELL. Signed-off-by:
-
Rodrigo Vivi authored
Catching-up with drm-next and drm-intel-gt-next. It will unblock a code refactor around the platform definitions (names vs acronyms). Signed-off-by: -
Jouni Högander authored
As a preparation for Xe move HW fence details away from intel_fbc code. Add new functions to check support for legacy fencing and fence id and use these in fbc code. Xe doesn't support legacy fencing. v2: Fix intel_gt_support_legacy_fencing macro Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230614051731.745821-4-jouni.hogander@intel.com
-
Jouni Högander authored
As a preparation for Xe change stolen memory initialization check to be done in use-time instead of during initialization. In case of xe, stolen memory is initialised much later so it can't be checked during init. There is no specific reason to check this in init for i915 either -> perform the check in use-time. This also gives us benefit fbc_no_reason reporting missing initialization being reason for disabled fbc. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Jeevan B <jeevan.b@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230614051731.745821-3-jouni.hogander@intel.com
-
Jouni Högander authored
We are preparing for Xe. Xe stolen memory handling differs from i915 so we want to move stolen memory handling details into i915_gem_stolen. Also add a common type for fbc compressed fb and use it from fbc code instead of underlying type directly. This way we can have common type i915_stolen_fb for both i915 and Xe. v2: Fix couple of checkpatch warnings Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2023-08-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Avoid infinite GPU waits by avoidin premature release of request's reusable memory (Chris, Janusz) - Expose RPS thresholds in sysfs (Tvrtko) - Apply GuC SLPC min frequency softlimit correctly (Vinay) - Restore SLPC efficient freq earlier (Vinay) - Consider OA buffer boundary when zeroing out reports (Umesh) - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL (Matt R) - Fix context workarounds with non-masked regs on MTL/DG2 (Lucas) - Enable the CCS_FLUSH bit in the pipe control and in the CS for MTL+ (Andi) - Update MTL workarounds 14018778641, 22016122933 (Tejas, Zhanjun) - Ensure memory quiesced before AUX CCS invalidation (Jonathan) - Add a gsc_info debugfs (Daniele) - Invalidate the TLBs on each GT on multi-GT device (Chris) - Fix a VMA UAF for multi-gt platform (Nirmoy) - Do not use stolen on MTL due to HW bug (Nirmoy) - Check HuC and GuC version compatibility on MTL (Daniele) - Dump perf_limit_reasons for slow GuC init debug (Vinay) - Replace kmap() with kmap_local_page() (Sumitra, Ira) - Add sentinel to xehp_oa_b_counters for KASAN (Andrzej) - Add the gen12_needs_ccs_aux_inv helper (Andi) - Fixes and updates for GSC memory allocation (Daniele) - Fix one wrong caching mode enum usage (Tvrtko) - Fixes for GSC wakeref (Alan) - Static checker fixes (Harshit, Arnd, Dan, Cristophe, David, Andi) - Rename flags with bit_group_X according to the datasheet (Andi) - Use direct alias for i915 in requests (Andrzej) - Replace i915->gt0 with to_gt(i915) (Andi) - Use the i915_vma_flush_writes helper (Tvrtko) - Selftest improvements (Alan) - Remove dead code (Tvrtko) Signed-off-by:
Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZMy6kDd9npweR4uy@jlahtine-mobl.ger.corp.intel.com
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
- Removing unused declarations (Arnd, Gustavo) - ICL+ DSI modeset sequence fixes (Ville) - Improvements on HDCP (Suraj) - Fixes and clean up on MTL Display (Mika Kahola, Lee, RK, Nirmoy, Chaitanya) - Restore HSW/BDW PSR1 (Ville) - Other PSR Fixes (Jouni) - Fixes around DC states and other Display Power (Imre) - Init DDI ports in VBT order (Ville) - General documentation fixes (Jani) - General refactor for better organization (Jani) - Bigjoiner fix (Stanislav) - VDSC Fixes and improvements (Stanialav, Suraj) - Hotplug fixes and improvements (Simon, Suraj) - Start using plane scale factor for relative data rate (Stanislav) - Use shmem for dpt objects (RK) - Simplify expression &to_i915(dev)->drm (Uwe) - Do not access i915_gem_object members from frontbuffer tracking (Jouni) - Fix uncore race around i915->params.mmio_debug (Jani) Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.6: UAPI Changes: * virtio: * Support sync objects Cross-subsystem Changes: * dt-bindings: * Move several panel bindings to the correct files * fbcon: * Cleanups * fbdev: * Use _IOMEM_, _SYSMEM_, _DMAMEM_ infixes for initializer macros and Kconfig tokens, update drivers accordingly * ps3fb: Build fix * hid/i2c: * Allow panels and touchscreens to power sequence together * host1x: * Fixes * video: * Fix Kconfig dependencies for boot-up logo Core Changes: * Documentation updates and fixes * Fixes * MIPI-DBI: * Allow using same the D/C GPIO for multiple displays plus driver updates * Tests: * Convert to kunit actions * Fix NULL-deref in drm_exec tests Driver Changes: * armada: * Fixes * ast: * Represent BMV as virtual connector * Report DP connection status * bridge: * dw-hdmi: Support CEC suspend/resume * Support debugfs for chains * Fixes * i915: * Fixes * imx: * Convert to dev_error_probe() * Cleanups * ipu-v3: * Convert to devm_platform_ioremap_resource() in several places * nouveau: * Workaround DPCD issues * panel: * Convert to of_device_get_match_data() * Fix Kconfig dependencies * simple: Set bpc value to fix warning; Set connector type for AUO T215HVN01; Support Innolux G156HCE-L01 plus DT bindings * ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings * startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings * sitronix-st7789v: Support Inanbo T28CP45TN89 plus DT bindings; Support EDT ET028013DMA plus DT bindings; Various cleanups * edp: Add timings for N140HCA-EAC * Allow panels and touchscreens to power sequence together * Documentation fixes * qaic: * Cleanups * repaper: * Fixes * ssd130x * Fix shadow-plane allocation * Cleanups * tegra: * Convert to devm_platform_ioremap_resource() in several places * Support bridge/connector * Enable PM * Fixes * udl: * Cleanups * v3d: * Fixes * vc4: * Convert tests to kunit actions * virtio: * Support sync objects * vkms: * Support gamma LUT * Fixes Signed-off-by: -
Dave Airlie authored
Merge tag 'drm-next-xilinx-20230802' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next Miscellaneous fixes for the Xilinx zynqmp-dpsub driver Signed-off-by:
-
- 04 Aug, 2023 3 commits
-
-
Jani Nikula authored
Commit 3f9ffce5 ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") started using -1 as the value for unset panel_type. It gets initialized in intel_panel_init_alloc(), but the SDVO code never calls it. Call intel_panel_init_alloc() to initialize the panel, including the panel_type. Reported-by:
Tomi Leppänen <tomi@tomin.site> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896 Fixes: 3f9ffce5 ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.1+ Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Tested-by:
-
Juha-Pekka Heikkila authored
If drm_edid_raw returned NULL on error don't try accessing anything behind that NULL Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
-
https://gitlab.freedesktop.org/agd5f/linuxDaniel Vetter authored
amd-drm-next-6.6-2023-07-28: amdgpu: - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SubVP fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - Add PSP 14.0 support - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes radeon: - Lots of checkpatch cleanups Merge conflicts: - drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c The switch to drm eu helpers in 8a206685 ("drm/amdgpu: use drm_exec for GEM and CSA handling v2") clashed with the cosmetic cleanups from 30953c4d ("drm/amdgpu: Fix style issues in amdgpu_gem.c"). I kept the former since the cleanup up code is gone. - drivers/gpu/drm/amd/amdgpu/atom.c. adf64e21 ("drm/amd: Avoid reading the VBIOS part number twice") removed code that 992b8fe1 ("drm/radeon: Replace all non-returning strlcpy with strscpy") polished. From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230728214228.8102-1-alexander.deucher@amd.com [sima: some merge conflict wrangling as noted] Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
- 03 Aug, 2023 4 commits
-
-
Arnd Bergmann authored
When a symbol is selected that has extra dependencies, anything that selects it must have the same dependencies. With the added CONFIG_DRM reference from I2C_HID_CORE, this broke a couple of drivers that now also depend on DRM: WARNING: unmet direct dependencies detected for I2C_HID_CORE Depends on [m]: HID_SUPPORT [=y] && I2C_HID [=y] && (DRM [=m] || !DRM [=m]) Selected by [y]: - I2C_HID_OF [=y] && HID_SUPPORT [=y] && I2C_HID [=y] - I2C_HID_ACPI [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && ACPI [=y] - I2C_HID_OF_GOODIX [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && OF [=y] x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_remove': (.text+0xfc8826): undefined reference to `drm_panel_remove_follower' x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_probe': (.text+0xfc8da0): undefined reference to `drm_is_panel_follower' Add the corresponding DRM||!DRM dependencies on each one that is affected. Fixes: 96a37bfd ("HID: i2c-hid: Support being a panel follower") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Thomas Zimmermann authored
Use fb_info() to print status message at the end of the probe function, which avoids decoding the devices. fb_info() works with or without an fbdev kernel device. Fixes the following error: ../drivers/video/fbdev/ps3fb.c: In function 'ps3fb_probe': ../drivers/video/fbdev/ps3fb.c:1172:40: error: 'struct fb_info' has no member named 'dev' 1172 | dev_driver_string(info->dev), dev_name(info->dev), | ^~ ../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap' 110 | _p_func(dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ ../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info' 1171 | dev_info(info->device, "%s %s, using %u KiB of video memory\n", | ^~~~~~~~ ../drivers/video/fbdev/ps3fb.c:1172:61: error: 'struct fb_info' has no member named 'dev' 1172 | dev_driver_string(info->dev), dev_name(info->dev), | ^~ ../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap' 110 | _p_func(dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ ../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info' 1171 | dev_info(info->device, "%s %s, using %u KiB of video memory\n", | ^~~~~~~~ Reported-by:Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/lkml/ccc63065-2976-88ef-1211-731330bf2866@infradead.org/Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Fixes: 701d2054 ("fbdev: Make support for userspace interfaces configurable") Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Helge Deller <deller@gmx.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Acked-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Simon Ser authored
Since commit 6b85aa68 ("drm: Enable PRIME import/export for all drivers"), import/export is always supported. Document this so that user-space knows what to expect. Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Jeffrey Hugo <quic_jhugo@quicinc.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230712183156.191445-1-contact@emersion.fr
-
Simon Ser authored
Convert struct drm_event to a kernel doc comment. Link to the generic DRM event types. Add a basic description of each event type. Signed-off-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230717093032.600773-1-contact@emersion.fr
-
