- 07 Apr, 2023 4 commits
-
-
Eduard Zingerman authored
The following example forces veristat to loop indefinitely: $ cat two-ok file_name,prog_name,verdict,total_states file-a,a,success,12 file-b,b,success,67 $ cat add-failure file_name,prog_name,verdict,total_states file-a,a,success,12 file-b,b,success,67 file-b,c,failure,32 $ veristat -C two-ok add-failure <does not return> The loop is caused by handle_comparison_mode() not checking if `base` variable points to `fallback_stats` prior advancing joined results using `base`. Signed-off-by:
Eduard Zingerman <eddyz87@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230407154125.896927-1-eddyz87@gmail.com
-
Wei Yongjun authored
After commit d6e6286a ("libbpf: disassociate section handler on explicit bpf_program__set_type() call"), bpf_program__set_type() will force cleanup the program's SEC() definition, this commit fixed the test helper but missed the bpftool, which leads to bpftool prog autoattach broken as follows: $ bpftool prog load spi-xfer-r1v1.o /sys/fs/bpf/test autoattach Program spi_xfer_r1v1 does not support autoattach, falling back to pinning This patch fix bpftool to set program type only if it differs. Fixes: d6e6286a ("libbpf: disassociate section handler on explicit bpf_program__set_type() call") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Song Liu authored
perf_event with type=PERF_TYPE_RAW and config=0x1b00 turned out to be not reliable in ensuring LBR is active. Thus, test_progs:get_branch_snapshot is not reliable in some systems. Replace it with PERF_COUNT_HW_CPU_CYCLES event, which gives more consistent results. Signed-off-by:
Song Liu <song@kernel.org> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20230407190130.2093736-1-song@kernel.org
-
Barret Rhoden authored
BPF helpers that take an ARG_PTR_TO_UNINIT_MEM must ensure that all of the memory is set, including beyond the end of the string. Signed-off-by:
Barret Rhoden <brho@google.com> Link: https://lore.kernel.org/r/20230407001808.1622968-1-brho@google.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
- 06 Apr, 2023 17 commits
-
-
Alexei Starovoitov authored
Yonghong Song says: ==================== LLVM commit [1] introduced hoistMinMax optimization like (i < VIRTIO_MAX_SGS) && (i < out_sgs) to upper = MIN(VIRTIO_MAX_SGS, out_sgs) ... i < upper ... and caused the verification failure. Commit [2] workarounded the issue by adding some bpf assembly code to prohibit the above optimization. This patch improved verifier such that verification can succeed without the above workaround. Without [2], the current verifier will hit the following failures: ... 119: (15) if r1 == 0x0 goto pc+1 The sequence of 8193 jumps is too complex. verification time 525829 usec stack depth 64 processed 156616 insns (limit 1000000) max_states_per_insn 8 total_states 1754 peak_states 1712 mark_read 12 -- END PROG LOAD LOG -- libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -14 libbpf: failed to load object 'loop6.bpf.o' ... The failure is due to verifier inadequately handling '<const> <cond_op> <non_const>' which will go through both pathes and generate the following verificaiton states: ... 89: (07) r2 += 1 ; R2_w=5 90: (79) r8 = *(u64 *)(r10 -48) ; R8_w=scalar() R10=fp0 91: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0 92: (ad) if r2 < r1 goto pc+41 ; R0_w=scalar() R1_w=scalar(umin=6,umax=5,var_off=(0x4; 0x3)) R2_w=5 R6_w=scalar(id=385) R7_w=0 R8_w=scalar() R9_w=scalar(umax=21474836475,var_off=(0x0; 0x7ffffffff)) R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40_w=4 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm ... 89: (07) r2 += 1 ; R2_w=6 90: (79) r8 = *(u64 *)(r10 -48) ; R8_w=scalar() R10=fp0 91: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0 92: (ad) if r2 < r1 goto pc+41 ; R0_w=scalar() R1_w=scalar(umin=7,umax=5,var_off=(0x4; 0x3)) R2_w=6 R6=scalar(id=388) R7=0 R8_w=scalar() R9_w=scalar(umax=25769803770,var_off=(0x0; 0x7ffffffff)) R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40=5 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm ... 89: (07) r2 += 1 ; R2_w=4088 90: (79) r8 = *(u64 *)(r10 -48) ; R8_w=scalar() R10=fp0 91: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0 92: (ad) if r2 < r1 goto pc+41 ; R0=scalar() R1=scalar(umin=4089,umax=5,var_off=(0x0; 0x7)) R2=4088 R6=scalar(id=12634) R7=0 R8=scalar() R9=scalar(umax=17557826301960,var_off=(0x0; 0xfffffffffff)) R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40=4087 fp-48=mmmmmmmm fp-56= fp-64=mmmmmmmm Patch 3 fixed the above issue by handling '<const> <cond_op> <non_const>' properly. During developing selftests for Patch 3, I found some issues with bound deduction with BPF_EQ/BPF_NE and fixed the issue in Patch 1. After the above issue is fixed, the second issue shows up. ... 67: (07) r1 += -16 ; R1_w=fp-16 ; bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i); 68: (b4) w2 = 8 ; R2_w=8 69: (85) call bpf_probe_read_kernel#113 ; R0_w=scalar() fp-16=mmmmmmmm ; return sgp; 70: (79) r6 = *(u64 *)(r10 -16) ; R6=scalar() R10=fp0 ; for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX); 71: (15) if r6 == 0x0 goto pc-49 ; R6=scalar() 72: (b4) w1 = 0 ; R1_w=0 73: (05) goto pc-46 ; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) { 28: (bc) w7 = w1 ; R1_w=0 R7_w=0 ; bpf_probe_read_kernel(&len, sizeof(len), &sgp->length); ... 23: (79) r3 = *(u64 *)(r10 -40) ; R3_w=2 R10=fp0 ; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) { 24: (07) r3 += 1 ; R3_w=3 ; for (i = 0; (i < VIRTIO_MAX_SGS) && (i < out_sgs); i++) { 25: (79) r1 = *(u64 *)(r10 -56) ; R1_w=scalar(umax=5,var_off=(0x0; 0x7)) R10=fp0 26: (ad) if r3 < r1 goto pc+34 61: R0=scalar() R1_w=scalar(umin=4,umax=5,var_off=(0x4; 0x1)) R3_w=3 R6=scalar(id=1658) R7=0 R8=scalar(id=1653) R9=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=mmmmmmmm fp-16=mmmmmmmm fp-24=mmmm???? fp-32= fp-40=2 fp-56= fp-64=mmmmmmmm ; if (sg_is_chain(&sg)) 61: (7b) *(u64 *)(r10 -40) = r3 ; R3_w=3 R10=fp0 fp-40_w=3 ... 67: (07) r1 += -16 ; R1_w=fp-16 ; bpf_probe_read_kernel(&sgp, sizeof(sgp), sgs + i); 68: (b4) w2 = 8 ; R2_w=8 69: (85) call bpf_probe_read_kernel#113 ; R0_w=scalar() fp-16=mmmmmmmm ; return sgp; 70: (79) r6 = *(u64 *)(r10 -16) ; for (n = 0, sgp = get_sgp(sgs, i); sgp && (n < SG_MAX); infinite loop detected at insn 71 verification time 90800 usec stack depth 64 processed 25017 insns (limit 1000000) max_states_per_insn 20 total_states 491 peak_states 169 mark_read 12 -- END PROG LOAD LOG -- libbpf: prog 'trace_virtqueue_add_sgs': failed to load: -22 Further analysis found the index variable 'i' is spilled but since it is not marked as precise. This is more tricky as identifying induction variable is not easy in verifier. Although a heuristic is possible, let us leave it for now. [1] https://reviews.llvm.org/D143726 [2] Commit 3c2611ba ("selftests/bpf: Fix trace_virtqueue_add_sgs test issue with LLVM 17.") ==================== Signed-off-by: -
Yonghong Song authored
Add various tests for code pattern '<const> <cond_op> <non_const>' to exercise the previous verifier patch. The following are veristat changed number of processed insns stat comparing the previous patch vs. this patch: File Program Insns (A) Insns (B) Insns (DIFF) ----------------------------------------------------- ---------------------------------------------------- --------- --------- ------------- test_seg6_loop.bpf.linked3.o __add_egr_x 12423 12314 -109 (-0.88%) Only one program is affected with minor change. Signed-off-by:
Yonghong Song <yhs@fb.com> Acked-by:
-
Yonghong Song authored
Currently, the verifier does not handle '<const> <cond_op> <non_const>' well. For example, ... 10: (79) r1 = *(u64 *)(r10 -16) ; R1_w=scalar() R10=fp0 11: (b7) r2 = 0 ; R2_w=0 12: (2d) if r2 > r1 goto pc+2 13: (b7) r0 = 0 14: (95) exit 15: (65) if r1 s> 0x1 goto pc+3 16: (0f) r0 += r1 ... At insn 12, verifier decides both true and false branch are possible, but actually only false branch is possible. Currently, the verifier already supports patterns '<non_const> <cond_op> <const>. Add support for patterns '<const> <cond_op> <non_const>' in a similar way. Also fix selftest 'verifier_bounds_mix_sign_unsign/bounds checks mixing signed and unsigned, variant 10' due to this change. Signed-off-by:
Dave Marchevsky <davemarchevsky@fb.com> Acked-by:
-
Yonghong Song authored
Add various tests for code pattern '<non-const> NE/EQ <const>' implemented in the previous verifier patch. Without the verifier patch, these new tests will fail. Signed-off-by:
-
Yonghong Song authored
Currently, for BPF_JEQ/BPF_JNE insn, verifier determines whether the branch is taken or not only if both operands are constants. Therefore, for the following code snippet, 0: (85) call bpf_ktime_get_ns#5 ; R0_w=scalar() 1: (a5) if r0 < 0x3 goto pc+2 ; R0_w=scalar(umin=3) 2: (b7) r2 = 2 ; R2_w=2 3: (1d) if r0 == r2 goto pc+2 6 At insn 3, since r0 is not a constant, verifier assumes both branch can be taken which may lead inproper verification failure. Add comparing umin/umax value and the constant. If the umin value is greater than the constant, or umax value is smaller than the constant, for JEQ the branch must be not-taken, and for JNE the branch must be taken. The jmp32 mode JEQ/JNE branch taken checking is also handled similarly. The following lists the veristat result w.r.t. changed number of processes insns during verification: File Program Insns (A) Insns (B) Insns (DIFF) ----------------------------------------------------- ---------------------------------------------------- --------- --------- --------------- test_cls_redirect.bpf.linked3.o cls_redirect 64980 73472 +8492 (+13.07%) test_seg6_loop.bpf.linked3.o __add_egr_x 12425 12423 -2 (-0.02%) test_tcp_hdr_options.bpf.linked3.o estab 2634 2558 -76 (-2.89%) test_parse_tcp_hdr_opt.bpf.linked3.o xdp_ingress_v6 1421 1420 -1 (-0.07%) test_parse_tcp_hdr_opt_dynptr.bpf.linked3.o xdp_ingress_v6 1238 1237 -1 (-0.08%) test_tc_dtime.bpf.linked3.o egress_fwdns_prio100 414 411 -3 (-0.72%) Mostly a small improvement but test_cls_redirect.bpf.linked3.o has a 13% regression. I checked with verifier log and found it this is due to pruning. For some JEQ/JNE branches impacted by this patch, one branch is explored and the other has state equivalence and pruned. Signed-off-by:
-
Martin KaFai Lau authored
Kal Conley says: ==================== This patchset includes the test with the bugfix as requested here: https://lore.kernel.org/all/f1a32d5a-03e7-fce1-f5a5-6095f365f0a9@linux.dev/ Patch #1 (the bugfix) is identical to the previous submission except that I improved the commit message slightly. Magnus: I improved the test code a little different than you asked since I thought this was a little simpler than having a separate function for now. Hopefully, you can live with this :-). ==================== Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
Kal Conley authored
Add unaligned descriptor test for frame size of 4001. Using an odd frame size ensures that the end of the UMEM is not near a page boundary. This allows testing descriptors that staddle the end of the UMEM but not a page. This test used to fail without the previous commit ("xsk: Fix unaligned descriptor validation"). Signed-off-by:Kal Conley <kal.conley@dectris.com> Link: https://lore.kernel.org/r/20230405235920.7305-3-kal.conley@dectris.comSigned-off-by:
-
Kal Conley authored
Make sure unaligned descriptors that straddle the end of the UMEM are considered invalid. Currently, descriptor validation is broken for zero-copy mode which only checks descriptors at page granularity. For example, descriptors in zero-copy mode that overrun the end of the UMEM but not a page boundary are (incorrectly) considered valid. The UMEM boundary check needs to happen before the page boundary and contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in xp_unaligned_validate_desc() instead like xp_check_unaligned() already does. Fixes: 2b43470a ("xsk: Introduce AF_XDP buffer allocation API") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.comSigned-off-by:
-
Viktor Malik authored
Functions for searching module kallsyms should have non-empty definitions only if CONFIG_MODULES=y and CONFIG_KALLSYMS=y. Until now, only CONFIG_MODULES check was used for many of these, which may have caused complilation errors on some configs. This patch moves all relevant functions under the correct configs. Fixes: bd5314f8 ("kallsyms, bpf: Move find_kallsyms_symbol_value out of internal header") Signed-off-by:
Viktor Malik <vmalik@redhat.com> Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303181535.RFDCnz3E-lkp@intel.com/ Link: https://lore.kernel.org/r/20230330102001.2183693-1-vmalik@redhat.comSigned-off-by:
-
Alexei Starovoitov authored
Quentin Monnet says: ==================== This set contains some improvements for bpftool's "visual" program dump option, which produces the control flow graph in a DOT format. The main objective is to add support for inline annotations on such graphs, so that we can have the C source code for the program showing up alongside the instructions, when available. The last commits also make it possible to display the line numbers or the bare opcodes in the graph, as supported by regular program dumps. v3: - Fixed formatting of DOT graph: escape spaces, and remove indent that would cause some unwanted spaces to show up in the resulting graph. - Don't print line information if the record is empty. - Add '<' and ' ' to the list of escaped characters for generting the DOT graph. - Truncate long file paths, use shorter field names ("line", "col") for code location information in the graph, add missing separator space. - Add a commit to return an error if JSON output and CFG are both required. - Add a drive-by, clean up commit for bash completion (avoid unnecessary calls to _bpftool_once_attr()). v2: Replace fputc(..., stdout) with putchar(...) in dotlabel_puts(). ==================== Signed-off-by: -
Quentin Monnet authored
In bpftool's bash completion file, function _bpftool_once_attr() is able to process multiple arguments. There are a few locations where this function is called multiple times in a row, each time for a single argument; let's pass all arguments instead to minimize the number of function calls required for the completion. Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.comSigned-off-by:
-
Quentin Monnet authored
Add support for displaying opcodes or/and file references (filepath, line and column numbers) when dumping the control flow graphs of loaded BPF programs with bpftool. The filepaths in the records are absolute. To avoid blocks on the graph to get too wide, we truncate them when they get too long (but we always keep the entire file name). In the unlikely case where the resulting file name is ambiguous, it remains possible to get the full path with a regular dump (no CFG). Signed-off-by:
-
Quentin Monnet authored
When dumping a program, the keywords "opcodes" (for printing the raw opcodes), "linum" (for displaying the filename, line number, column number along with the source code), and "visual" (for generating the control flow graph for translated programs) are mutually exclusive. But there's no reason why they should be. Let's make it possible to pass several of them at once. The "file FILE" option, which makes bpftool output a binary image to a file, remains incompatible with the others. Signed-off-by:
-
Quentin Monnet authored
We do not support JSON output for control flow graphs of programs with bpftool. So far, requiring both the CFG and JSON output would result in producing a null JSON object. It makes more sense to raise an error directly when parsing command line arguments and options, so that users know they won't get any output they might expect. If JSON is required for the graph, we leave it to Graphviz instead: # bpftool prog dump xlated <REF> visual | dot -Tjson Suggested-by: -
Quentin Monnet authored
We support dumping the control flow graph of loaded programs to the DOT format with bpftool, but so far this feature wouldn't display the source code lines available through BTF along with the eBPF bytecode. Let's add support for these annotations, to make it easier to read the graph. In prog.c, we move the call to dump_xlated_cfg() in order to pass and use the full struct dump_data, instead of creating a minimal one in draw_bb_node(). We pass the pointer to this struct down to dump_xlated_for_graph() in xlated_dumper.c, where most of the logics is added. We deal with BTF mostly like we do for plain or JSON output, except that we cannot use a "nr_skip" value to skip a given number of linfo records (we don't process the BPF instructions linearly, and apart from the root of the graph we don't know how many records we should skip, so we just store the last linfo and make sure the new one we find is different before printing it). When printing the source instructions to the label of a DOT graph node, there are a few subtleties to address. We want some special newline markers, and there are some characters that we must escape. To deal with them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in btf_dumper.c. We'll reuse this function in a later commit to format the filepath, line, and column references as well. Signed-off-by:
-
Quentin Monnet authored
When dumping the control flow graphs for programs using the 16-byte long load instruction, we need to skip the second part of this instruction when looking for the next instruction to process. Otherwise, we end up printing "BUG_ld_00" from the kernel disassembler in the CFG. Fixes: efcef17a ("tools: bpftool: generate .dot graph from CFG information") Signed-off-by:
-
Quentin Monnet authored
The documentation states that when line_info is available when dumping a program, the source line will be displayed "by default". There is no notion of "default" here: the line is always displayed if available, there is no way currently to turn it off. In the next sentence, the documentation states that if "linum" is used on the command line, the relevant filename, line, and column will be displayed "on top of the source line". This is incorrect, as they are currently displayed on the right side of the source line (or on top of the eBPF instruction, not the source). This commit fixes the documentation to address these points. Signed-off-by:
-
- 05 Apr, 2023 8 commits
-
-
YiFei Zhu authored
In some cases the loopback latency might be large enough, causing the assertion on invocations to be run before ingress prog getting executed. The assertion would fail and the test would flake. This can be reliably reproduced by arbitrarily increasing the loopback latency (thanks to [1]): tc qdisc add dev lo root handle 1: htb default 12 tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps tc qdisc add dev lo parent 1:12 netem delay 100ms Fix this by waiting on the receive end, instead of instantly returning to the assert. The call to read() will wait for the default SO_RCVTIMEO timeout of 3 seconds provided by start_server(). [1] https://gist.github.com/kstevens715/4598301Reported-by:
Martin KaFai Lau <martin.lau@linux.dev> Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/ Fixes: 3573f384 ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress") Acked-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
YiFei Zhu <zhuyifei@google.com> Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.comSigned-off-by:
-
Kal Conley authored
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after receiving the last (valid) packet which is not the final packet sent in the test (valid and invalid packets are sent in alternating fashion with the final packet being invalid). Since the last packet may or may not have been dropped already, both outcomes must be allowed. This issue could also be fixed by making sure the last packet sent is valid. This alternative is left as an exercise to the reader (or the benevolent maintainers of this file). This problem was quite visible on certain setups. On one machine this failure was observed 50% of the time. Also, remove a redundant assignment of pkt_stream->nb_pkts. This field is already initialized by __pkt_stream_alloc. Fixes: 27e934be ("selftests: xsk: make stat tests not spin on getsockopt") Signed-off-by:
-
Kal Conley authored
This change fixes flakiness in the BIDIRECTIONAL test: # [is_pkt_valid] expected length [60], got length [90] not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL When IPv6 is enabled, the interface will periodically send MLDv1 and MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail since it uses VETH0 for RX. For other tests, this was not a problem since they only receive on VETH1 and IPv6 was already disabled on VETH0. Fixes: a8905257 ("selftests/bpf: Xsk selftests framework") Signed-off-by: -
Martin KaFai Lau authored
Kal Conley says: ==================== This patchset fixes a minor bug in xskxceiver.c then adds a test case for valid packets at the end of the UMEM. ==================== Signed-off-by: -
Kal Conley authored
Add test case to testapp_invalid_desc for valid packets at the end of the UMEM. Signed-off-by:
-
Kal Conley authored
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the macro since it's no longer being used. Fixes: 909f0e28 ("selftests: xsk: Add tests for 2K frame size") Signed-off-by:
-
Kal Conley authored
xskxceiver depends on xskxceiver.h so tell make about it. Signed-off-by:
-
Jiri Olsa authored
Artem reported suspicious RCU usage [1]. The reason is that verifier calls find_kallsyms_symbol_value with preemption enabled which will trigger suspicious RCU usage warning in rcu_dereference_sched call. Disabling preemption in find_kallsyms_symbol_value and adding __find_kallsyms_symbol_value function. Fixes: 31bf1dbc ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules") Reported-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/bpf/20230403220254.2191240-1-jolsa@kernel.org [1] https://lore.kernel.org/bpf/ZBrPMkv8YVRiWwCR@samus.usersys.redhat.com/
-
- 04 Apr, 2023 10 commits
-
-
Andrii Nakryiko authored
Alexei Starovoitov says: ==================== From: Alexei Starovoitov <ast@kernel.org> The patch set is addressing a fallout from commit 6fcd486b ("bpf: Refactor RCU enforcement in the verifier.") It was too aggressive with PTR_UNTRUSTED marks. Patches 1-6 are cleanup and adding verifier smartness to address real use cases in bpf programs that broke with too aggressive PTR_UNTRUSTED. The partial revert is done in patch 7 anyway. ==================== Signed-off-by:
-
Alexei Starovoitov authored
Add tracing tests for walking skb->sk and req->sk. Signed-off-by:
David Vernet <void@manifault.com> Link: https://lore.kernel.org/bpf/20230404045029.82870-9-alexei.starovoitov@gmail.com
-
Alexei Starovoitov authored
The commit 6fcd486b ("bpf: Refactor RCU enforcement in the verifier.") broke several tracing bpf programs. Even in clang compiled kernels there are many fields that are not marked with __rcu that are safe to read and pass into helpers, but the verifier doesn't know that they're safe. Aggressively marking them as PTR_UNTRUSTED was premature. Fixes: 6fcd486b ("bpf: Refactor RCU enforcement in the verifier.") Signed-off-by:
-
Alexei Starovoitov authored
Allow bpf program access cgrp->kn, mm->exe_file, skb->sk, req->sk. Signed-off-by:
-
Alexei Starovoitov authored
check_reg_type() unconditionally disallows PTR_TO_BTF_ID | PTR_MAYBE_NULL. It's problematic for helpers that allow ARG_PTR_TO_BTF_ID_OR_NULL like bpf_sk_storage_get(). Allow passing PTR_TO_BTF_ID | PTR_MAYBE_NULL into such helpers. That technically includes bpf_kptr_xchg() helper, but in practice: bpf_kptr_xchg(..., bpf_cpumask_create()); is still disallowed because bpf_cpumask_create() returns ref counted pointer with ref_obj_id > 0. Signed-off-by:
-
Alexei Starovoitov authored
bpf_[sk|inode|task|cgrp]_storage_[get|delete]() and bpf_get_socket_cookie() helpers perform run-time check that sk|inode|task|cgrp pointer != NULL. Teach verifier about this fact and allow bpf programs to pass PTR_TO_BTF_ID | PTR_MAYBE_NULL into such helpers. It will be used in the subsequent patch that will do bpf_sk_storage_get(.., skb->sk, ...); Even when 'skb' pointer is trusted the 'sk' pointer may be NULL. Signed-off-by:
-
Alexei Starovoitov authored
btf_nested_type_is_trusted() tries to find a struct member at corresponding offset. It works for flat structures and falls apart in more complex structs with nested structs. The offset->member search is already performed by btf_struct_walk() including nested structs. Reuse this work and pass {field name, field btf id} into btf_nested_type_is_trusted() instead of offset to make BTF_TYPE_SAFE*() logic more robust. Signed-off-by: -
Alexei Starovoitov authored
Remove unused arguments from btf_struct_access() callback. Signed-off-by:
-
Alexei Starovoitov authored
Remove duplicated if (atype == BPF_READ) btf_struct_access() from btf_struct_access() callback and invoke it only for writes. This is possible to do because currently btf_struct_access() custom callback always delegates to generic btf_struct_access() helper for BPF_READ accesses. Signed-off-by:
-
Ilya Leoshkevich authored
bpf_testmod.ko sometimes fails to build from a clean checkout: BTF [M] linux/tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.ko /bin/sh: 1: linux-build//tools/build/resolve_btfids/resolve_btfids: not found The reason is that RESOLVE_BTFIDS may not yet be built. Fix by adding a dependency. Signed-off-by:Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
- 03 Apr, 2023 1 commit
-
-
Dave Marchevsky authored
bpf_obj_drop_impl has a void return type. In check_kfunc_call, the "else if" which sets insn_aux->kptr_struct_meta for bpf_obj_drop_impl is surrounded by a larger if statement which checks btf_type_is_ptr. As a result: * The bpf_obj_drop_impl-specific code will never execute * The btf_struct_meta input to bpf_obj_drop is always NULL * __bpf_obj_drop_impl will always see a NULL btf_record when called from BPF program, and won't call bpf_obj_free_fields * program-allocated kptrs which have fields that should be cleaned up by bpf_obj_free_fields may instead leak resources This patch adds a btf_type_is_void branch to the larger if and moves special handling for bpf_obj_drop_impl there, fixing the issue. Fixes: ac9f0605 ("bpf: Introduce bpf_obj_drop") Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
-
