On pre-HSW we have dedicated hardware for the RGB limited range
handling, and so we don't want to compress with the CSC matrix.

Toss in a FIXME about gamma LUT vs. limited range using the CSC.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-4-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>

The pipe CSC was introduced by ILK, so change everything related
to use ilk_ as the prefix.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-3-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>

If we don't have to frob with the user provided ctm matrix there's
no point in copying it over. Just point at the user ctm directly.

Also the matrix gets fully populated by ctm_mult_by_limited() so
no need to zero initialize it.

Cc: Johnson Lin <johnson.lin@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-2-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>

To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Currently, BXT_PP is hardcoded with value '0'.
It practically disabled eDP backlight on MRB (BXT) platform.

This patch will tell which BXT_PP registers (there are two set of
PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing
table) and this will enabled eDP backlight controller on MRB (BXT)
platform.

v2:
 - Remove unnecessary information in commit message.
 - Assign vbt.backlight.controller to a backlight_controller variable and
   return the variable value.
v3:
 - Rebased to latest code base.
 - updated commit title.
Signed-off-by: Mustamin B Mustaffa <mustamin.b.mustaffa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227030734.37901-1-mustamin.b.mustaffa@intel.com

As the ftrace log is overflowing the pstore capture, we lose the last
gasps from dmesg which includes the GEM_BUG_ON function:line and condition
that failed. Vital information for tracking down the bug, so append it to
the frace log as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227211816.5546-1-chris@chris-wilson.co.uk

Old Wa added now forever on CNL all steppings.

With CPU P states enabled along with RC6, dispatcher
hangs can happen.

Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222200535.9290-1-rodrigo.vivi@intel.com

We can still use PSR1 when PSR2 conditions are not met.

So, let's split the check in a way that we make sure has_psr
gets set independently of PSR2 criteria.

v2: Duh! Handle proper return to avoid breaking PSR2.
v3: (DK):
	- better name for psr2 conditions check function
	- Don't remove FIXME block and psr2.support check.
	- Add a debug message to show us what PSR or PSR2 is
	  getting enabled now we have ways to enabled PSR on
	  PSR2 panels.
	- s/PSR2 disabled/PSR2 not enabled

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227212913.14083-2-rodrigo.vivi@intel.com

According to spec:
"PSR2 is supported for pipe active sizes up to
3640 pixels wide and 2304 lines tall."

BSpec: 7713

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227212913.14083-1-rodrigo.vivi@intel.com

eDP spec says - "If PSR/PSR2 is supported, the SET_POWER_CAPABLE bit in the
EDP_GENERAL_CAPABILITY_1 register (DPCD Address 00701h, bit d7) must be set
to 1."

Reject PSR on panels without this cap bit set as such panels cannot be
controlled via SET_POWER & SET_DP_PWR_VOLTAGE register and the DP source
needs to be able to do that for PSR.

Thanks to Nathan for debugging this.

Panel cap checks like this can be done just once, let's fix this
when PSR dpcd init movement lands.

Cc: Nathan D Ciobanu <nathan.d.ciobanu@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227032723.15474-1-dhinakaran.pandiyan@intel.com

No functional change.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-6-dhinakaran.pandiyan@intel.com

The core already takes care of the delay before retrying. The delay now
changes to (500, 600)us instead of (500 + 1000, 600 + 1500)us.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-5-dhinakaran.pandiyan@intel.com

The cap check should be specifically for bit 0 instead of any bit.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 474d1ec4 ("drm/i915/skl: Enabling PSR2 SU with frame sync")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-4-dhinakaran.pandiyan@intel.com

intel_edp_init_dpcd() is cluttered with PSR specific DPCD checks and
intel_dp.c is huge.

No functional change intended.

v2: Rebased.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-3-dhinakaran.pandiyan@intel.com

Frontbuffer flush and invalidate call psr, fbc and drrs functions that use
mutexes but they can be called in atomic contexts in the fbdev path. The
point where the spinlocks are acquired is up in the call stack that is not
entirely easy to spot, so annotate with might_sleep().

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-2-dhinakaran.pandiyan@intel.com

PSR on CNL requires AUX IO wells to be kept on and the existing AUX domain
for AUX-A enables DC_OFF well too. This is not required, so add a new
AUX_IO_A domain for AUX-A to allow DC states to remain enabled. Other AUX
channels re-use the existing AUX domains.

v4: Reword comment (Rodrigo and Ville)
    Rename _get and _put functions to include aux_io substring(Rodrigo)
    Remove unnecessary diff that got included.
v3: Extract aux domain selection into a function (Ville)
v2: Add AUX IO domain only for AUX-A
    Rebased on top of Ville's AUX series.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223221520.18464-1-dhinakaran.pandiyan@intel.com

Since we're inhibiting context save of preempt context, we're no longer
tracking the position of HEAD/TAIL. With GuC, we're adding a new
breadcrumb for each preemption, which means that the HW will do more and
more breadcrumb writes. Eventually the ring is filled, and we're
submitting the preemption context with HEAD==TAIL==0, which won't result
in breadcrumb write, but will trigger hangcheck instead.
Instead of writing a new preempt breadcrumb for each preemption, let's
just fill the ring once at init time (which also saves a couple of
instructions in the tasklet).

v2: Assert that context save restore is inhibited, don't assert on ring
    alignment. (Chris)
v3: Cleanup checkpatch.

Fixes: 517aaffe ("drm/i915/execlists: Inhibit context save/restore for the fake preempt context")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180226163800.21745-1-michal.winiarski@intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The usual if ladder order should be from newest to oldest
platform. However the CNL conditional statement was misplaced.
This patch sets the DP source for platforms starting from the newest
to oldest.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1519701075-9894-1-git-send-email-manasi.d.navare@intel.com

Sometimes we need to boost the priority of an in-flight request, which
may lead to the situation where the second submission port then contains
a higher priority context than the first and so we need to inject a
preemption event. To do so we must always check inside
execlists_dequeue() whether there is a priority inversion between the
ports themselves as well as the head of the priority sorted queue, and we
cannot just skip dequeuing if the queue is empty.

As Michał noted, this doesn't simply extend to handling more than 2-port
submission, as we may need to reorder within the array of executing
requests which themselves are lower priority than the first. A task for
later!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222142229.14517-1-chris@chris-wilson.co.ukReviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

Mostly doc/print messages that were not updated after commit e61e0f51
("drm/i915: Rename drm_i915_gem_request to i915_request").
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222172405.11386-1-michel.thierry@intel.com

Collect all the aux ch vfunc assignments into intel_dp_aux_init()
instead of having it spread around.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-4-ville.syrjala@linux.intel.com

Just store function pointers that give us the correct register offsets
instead of storing the register offsets themselves. Slightly less
efficient perhaps but saves a few bytes and better matches how we do
things elsewhere.

v2: Keep a local array of data registers (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-3-ville.syrjala@linux.intel.com

Since we no longer have a 1:1 correspondence between ports and AUX
channels, let's give AUX channels their own enum. Makes it easier
to tell the apples from the oranges, and we get rid of the
port E AUX power domain FIXME since we now derive the power domain
from the actual AUX CH.

v2: Rebase due to AUX F
v3: Split out the power domain fix (Rodrigo)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> #v2
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-2-ville.syrjala@linux.intel.com

Select the aux power domain based on the aux ch rather than based on
the port. Now we can rid ourselves of the port E FIXME as well.

v2: Split from the enum aux_ch patch (Rodrigo)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> #v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-1-ville.syrjala@linux.intel.com

Currently the FBC code doesn't handle the 90/270 degree rotated case
correctly. We would need the GTT tracking to monitor the fence on the
normal GTT view (the rotated view doesn't even have a fence). Not quite
sure how we should program the fence Y offset etc. in that case. For now
we'll end up disabling FBC with 90/270 degree rotation. Add a FIXME
to remind people about this fact.

v2: Reword the text (Chris)
    Move the FIXME to the fbc code

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-7-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

We've replicated the fb pin/unpin code in a few places. Pull it into
convenint helpers.

Slight change in locking behaviour as intel_cleanup_plane_fb() now
grab struct_mutex unconditionally.

v2: Change the locking to be symmetric between pin and unpin

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-6-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

As only a subset of primary planes are FBC capable there's no need
to waste fences on all of them. So let's skip the fence if the plane
isn't even fbc capable.

In the future we might extend this to skip the fence even for FBC
capable planes if the crtc and/or plane state isn't suitable
for FBC.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-5-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Let's record the information whether a plane can do fbc or not under
struct inte_plane.

v2: Rebase due to i9xx_plane_id
    Handle BDW/HSW correctly
v3: Move inte_fbc_init() back since we depend on it happening
    even with i915.disable_display, and populate
    fbc->possible_framebuffer_bits directly from the
    plane init code instead
v4: Add note about plane A being tied to pipe A on HSW+

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221173101.19385-1-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-5-ville.syrjala@linux.intel.com

Currently we pin a fence on every plane doing tiled scanout. The
number of planes we have available is fast apporaching the number
of fences so we really should stop wasting them. Only FBC needs
the fence on gen4+, so let's use fences only for the primary planes
on those platforms.

v2: drop the tiling check from plane_uses_fence() as the obj is
    NULL during initial_plane_config() and we don't rally need the
    check since i915_vma_pin_fence() does the check anyway

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221184807.577-1-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Gen2/3 display engine depends on the fence for tiled scanout. So if we
fail to get a fence fail the entire operation.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-2-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Some panels support limited range output (16-235) compared
to full range RGB values (0-255). Also userspace can control
the RGB range using "Broadcast RGB" property. Currently the
code to handle full range to limited range is broken. This
patch fixes the same by properly scaling down all the full
range co-efficients with limited range scaling factor.

v2: Fixed Ville's review comments.

v3: Changed input to const and used correct data types as
    suggested by Ville

v4: Fixed some missing data type corrections.
Signed-off-by: Johnson Lin <johnson.lin@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1517327489-26128-1-git-send-email-uma.shankar@intel.com

Slightly smaller code and a bit more logical layout.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222111658.4999-1-tvrtko.ursulin@linux.intel.com

It turns out that HSW has a register that tells us how many EUs are
disabled per half-slice (roughly a similar notion to subslice). We
didn't read those registers so far as most userspace drivers didn't
need those values prior to Gen8, but an internal library would like to
have access to this.

Since we already have the getparam interface, there is no harm in
exposing this.

v2: Rename bits value (Joonas)

v3: s/GEM_BUG_ON/MISSING_CASE/ (Joonas)

v4: s/GEM_BUG_ON/MISSING_CASE/ again... (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221204902.23084-1-lionel.g.landwerlin@intel.com

Show GEN11 specific interrupt registers in debugfs

v2: Update for POR changes. (Daniele Ceraolo Spurio)
v3: get runtime pm ref. unify common parts with gen8 (Daniele)

Cc: Ceraolo Spurio, Daniele <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220153755.13509-2-mika.kuoppala@linux.intel.com

This is the current PCI ID list in our documentation.

Let's leave the _gt#_ part out for now since our current documentation
is not 100% clear and we don't need this info now anyway.

v2: Use the new ICL_11 naming (Kelvin Gardiner).
v3: Latest IDs as per BSpec (Oscar).
v4: Make it compile (Paulo).
v5: Remove comments (Lucas).
v6: Multile rebases (Paulo).
v7: Rebase (Mika)

Reviewed-by: Anuj Phogat <anuj.phogat@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220153755.13509-1-mika.kuoppala@linux.intel.com

Print out the current request/context before doing the GEM_BUG_ON, so
that we can inspect the values in the ftrace.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221152301.9178-1-chris@chris-wilson.co.uk

Include a GEM_TRACE to show when the context is complete and we advance
the ELSP port.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221151553.9054-1-chris@chris-wilson.co.uk

Load an empty ringbuffer for preemption, ignoring the lite-restore
workaround as we know the preempt context is always idle before preemption.

Note that after some digging by Michal Winiarski, we found that
RING_HEAD is no longer being updated (due to inhibiting context save
restore) so this patch is already in effect!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221133236.29402-1-chris@chris-wilson.co.uk

We want to de-emphasize the link between the request (dependency,
execution and fence tracking) from GEM and so rename the struct from
drm_i915_gem_request to i915_request. That is we may implement the GEM
user interface on top of requests, but they are an abstraction for
tracking execution rather than an implementation detail of GEM. (Since
they are not tied to HW, we keep the i915 prefix as opposed to intel.)

In short, the spatch:
@@

@@
- struct drm_i915_gem_request
+ struct i915_request

A corollary to contracting the type name, we also harmonise on using
'rq' shorthand for local variables where space if of the essence and
repetition makes 'request' unwieldy. For globals and struct members,
'request' is still much preferred for its clarity.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221095636.6649-1-chris@chris-wilson.co.ukReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

No code changes, fixes doc build warnings and polish some doc text.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221073908.4500-1-dhinakaran.pandiyan@intel.com