into redhat.com:/spare/repo/libata-2.5

The original submittor of the quirk code noted that the errata
of a lockup creating when the condition "sector % 15 == 1" is
true only on chip revisions <= 1.  This is limitation on chip
revision is apparently not correct, therefore we apply to all
affected drives in the quirk list.

This is a sledgehammer fix, limiting max-sectors to 15.  A much better
fix would split the hardware request into two taskfiles, issuing
an additional command, thereby avoiding "sectors % 15 == 1"

Given the errata is limited to "sil 311x + <these drives>", it is hoped
that some janitor cares enough to do a real fix.

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.5

The very early memory detection patch broke voyager.

This fixes it again.

Fix a bug which was spotted by Alex Lyashkov <shadow@psoft.net>

The fairly unobvious coding in __kill_pg_info() will cause a zero value to be
incorrectly returned if the second or succeeding call to
group_send_sig_info() returns an error.

From: Olaf Hering <olh@suse.de>

This patch is needed on s390.

From: James Bottomley <James.Bottomley@SteelEye.com>

pci_dev.consistent_dma_mask was introduced to get around problems in the
IA64 Altix machine.

Now, we have a use for it in x86: the aacraid needs coherent memory in a
31 bit address range (2GB).  Unfortunately, x86 is converted to the dma
model, so it can't see the pci_dev by the time coherent memory is
allocated.

The solution to all of this is to move pci_dev.consistent_dma_mask to
dev.coherent_dma_mask and make x86 use it in the dma_alloc_coherent()
calls.

This should allow me to make the aacraid set the coherent mask instead
of using it's current dma_mask juggling.

Updates for 2.6.4 for PARISC:

 - defconfigs (Randolph Chung)
 - copyright updates (Grant Grundler)
 - Fix DOS hole in sys_clone (James Bottomley)
 - missing hardware ID (Andy Walker)
 - disable interrupts during cache-flushes (LaMont Jones)
 - Fix crash on machines with <256MB ram (Randolph Chung)
 - Make SuckyIO IDE work better (Randolph Chung)
 - Align data_start so the extable is writable (Randolph Chung)
 - Extensive rewrite of virtual merging code (James Bottomley)
 - Fix EISA, non-PCI module builds (Matthew Wilcox)
 - Fix Elroy PCI config space byte & word writes (Grant Grundler)
 - Eliminate a warning in parport_gsc (Helge Deller)
 - Fix endian problem with ide mmio macros (Randolph Chung)
 - Delete asm/keyboard.h (Matthew Wilcox)
 - Delete asm/md.h (Grant Grundler)
 - Eliminate a warning in ALSA harmony (Matthew Wilcox)

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into ppc970.osdl.org:/home/torvalds/v2.5/linux

drivers/scsi/sata_vsc.c: In function `vsc_sata_interrupt':
include/linux/libata.h:414: sorry, unimplemented: inlining failed in call to 'ata_host_intr': function body not available
drivers/scsi/sata_vsc.c:187: sorry, unimplemented: called from here

From: Rusty Russell <rusty@rustcorp.com.au>

From: Andrea Arcangeli <andrea@suse.de>

We should drop module sem before calling mod->exit, for practical reasons:
too many module exit functions oops or hang, resulting in a permenantly held
module sem, which blocks all module ops including lsmod.

From: "David S. Miller" <davem@redhat.com>

Currently, for an existing DMA mapping, there is a way to transfer buffer
ownership back to the cpu, yet there is no way to give it back to the device
again explicitly.  The latter really is needed on platforms where the PCI
subsystem does not snoop the cpu caches, MIPS is one example.

Many drivers were expecting the existing DMA sync interface to handle both
directions, which was wrong.

Now, with this change, we have explicit interfaces for DMA syncing to/from
the device and the cpu.

This simply throws out the 53c700 driver's optimistic setting of the
best possible transport parameters and replaces it with DV
determination.  It also adds a missing report_bus_reset() callback and
finally does a delayed DV on device errors.

ALSA Core
fixed the wrong release of id proc file.

ALSA Core
added the new magic numbers for atiixp and au88x0 drivers.

Documentation,PCI drivers,Intel8x0-modem driver
added Intel-compatible onboard MC97 modem driver
by Sasha Khapyorsky <sashak@smlink.com>

Documentation,PCI drivers,ATIIXP driver
added snd-atiixp driver for the ATI IXP150/200/250 AC97 controllers.

MIXART driver
fixed the compile warning.

EMU10K1/EMU10K2 driver
disabled Dell OEM Emu10k1x from the pci id list.
the board isn't compatible with the normal emu10k1.

au88x0 driver
removed EXPORT_NO_SYMBOLS.

PPC Tumbler driver
fixed the info callback of mixer input source (for enum type).

USB generic driver
added fix and workaround for the mixer problem on SB Extigy.

Documentation
fixed the files to include.

Documentation
changed the description of the buffer allocation routines
for the new designed functions.

PPC Tumbler driver
added input source switch to select mic/line-in.

Documentation,PCI drivers,au88x0 driver
added the au88x0 drivers for Aureal soundcards by Manuel Jander <mjander@embedded.cl>

VIA82xx driver
patch was applied wrongly.  fixed the rate restriction of spdif output
again.

DT019x driver
Fixed warnings

VIA82xx driver
restrict the PCM sample rates to 32, 44.1 and 48kHz when the SPDIF
switch is on.

USB generic driver
prevent twenty-seconds wait when unplugging USB MIDI device with a port subscription

USB generic driver
show one decimal place of momentary frequency in proc file

USB generic driver
use MIN_PACKS_URB as lower bound for nrpacks parameter

ALSA sequencer,ALSA<-OSS sequencer
use wrapper function for DELETE_PORT ioctl calls

ALSA sequencer
remove superfluous call to snd_seq_event_port_detach

into suse.cz:/home/perex/bk/linux-sound/linux-sound

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.5

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.5