- 26 Aug, 2015 23 commits
-
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10698/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
-
Markos Chandras authored
Set up the I6400 FTLB probability similar to P5600 and proAptiv. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10652/Signed-off-by:
-
Markos Chandras authored
R6 has dropped the MMUExtDef field from the config4 register and it now returns 0. However, the return value means nothing in that case and the only supported configuration for R6 is the VTLB+FTLB (MMUextDef == 3). As a result, rework the code so that the correct value is set for R6 cores. Signed-off-by:
-
Markos Chandras authored
Add a default case for the FTLB enable/disable code. This will be used to detect that something went wrong in the set_ftlb_enable() function either because that function knows nothing about the running core, or simply because the core can't turn its FTLB on/off. Signed-off-by:
-
Markos Chandras authored
We are so early in the boot process where we really don't want to stall and wait for CP0 FTLB related changes become visible so just drop the cp0 hazard barrier. Signed-off-by:
-
Markos Chandras authored
CM3 uses a 64-bit counter and compare registers so add support for them in the GIC counter interrupt. Signed-off-by:
-
Markos Chandras authored
Previously, the GIC accessors were only accessing u32 registers but newer CMs may actually be 64-bit on MIPS64 cores. As a result of which, extended these accessors to support 64-bit reads and writes. Signed-off-by:
-
Markos Chandras authored
The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by:
-
Markos Chandras authored
The GCR CPC base register is 64-bit on 64-bit processors so use the appropriate field. Signed-off-by:
-
Markos Chandras authored
The CMGCRBase register (CP0, 15, 3) register is 64-bit on MIPS64 so we change its type to unsigned long. Signed-off-by:
-
Markos Chandras authored
Previously, the CM accessors were only accessing CM registers as u32 types instead of using the native CM register with. However, newer CMs may actually be 64-bit on MIPS64 cores. Fortunately, current 64-bit CMs (CM3) hold all the useful configuration bits in the lower half of the 64-bit registers (at least most of them) so they can still be accessed using the current 32-bit accessors. Signed-off-by:
-
Markos Chandras authored
Allow platforms to perform platform-specific steps before configuring the L2 cache. This is necessary for platforms with CM3 since the L2 parameters no longer live in the Config2 register. Signed-off-by:
-
Paul Burton authored
Detect the L2 cache configuration from GCR_L2_CONFIG when a CM3 is present in the system, rather than from Config2 which does not expose the L2 configuration on I6400. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Paul Burton authored
Provide accessor functions for the GCR_L2_CONFIG register introduced with CM3, and define the bits included in the register. Signed-off-by:
-
Paul Burton authored
Provide a function to trivially return the version of the CM present in the system, or 0 if no CM is present. The mips_cm_revision() will be used later on to determine the CM register width, so it must not use the regular CM accessors to read the revision register since that will lead to build failures due to recursive inlines. Signed-off-by:
-
Markos Chandras authored
R6 does not support the MIPS MT ASE and the CMP/SMP options so restrict them in order to prevent users from selecting incompatible SMP configuration for R6 cores. We also disable the CPS/SMP option because its support hasn't been added to the CPS code yet. Signed-off-by:
-
Markos Chandras authored
Add a case in cpu_probe_mips for the MIPS I6400 processor ID, which sets the CPU type to the new CPU_I6400. Signed-off-by:
-
Markos Chandras authored
Add a CPU_I6400 case to various switch statements, doing the same thing as for CPU_P5600. Signed-off-by:
-
Markos Chandras authored
Add a Processor ID and CPU type for the MIPS I6400 core. Signed-off-by:
-
Alban Bedel authored
Remove the ugly cross tree include now that IRQCHIP_DECLARE moved to linux/irqchip.h. Signed-off-by:
Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10633/Signed-off-by:
-
- 24 Aug, 2015 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A couple of major (hang and deadlock) fixes with fortunately fairly rare triggering conditions. The PM oops is only really triggered by people using enclosure services (rare) and the fnic driver is mostly used in enterprise environments" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: SCSI: Fix NULL pointer dereference in runtime PM fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
-
- 23 Aug, 2015 3 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS bug fixes from Ralf Baechle: "Two more fixes for 4.2. One fixes a build issue with the LLVM assembler - LLVM assembler macro names are case sensitive, GNU as macro names are insensitive; the other corrects a license string (GPL v2, not GPLv2) such that the module loader will recognice the license correctly" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: FIRMWARE: bcm47xx_nvram: Fix module license. MIPS: Fix LLVM build issue.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull 9p regression fix from Al Viro: "Fix for breakage introduced when switching p9_client_{read,write}() to struct iov_iter * (went into 4.1)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: 9p: ensure err is initialized to 0 in p9_client_read/write -
Vincent Bernat authored
Some use of those functions were providing unitialized values to those functions. Notably, when reading 0 bytes from an empty file on a 9P filesystem, the return code of read() was not 0. Tested with this simple program: #include <assert.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, const char **argv) { assert(argc == 2); char buffer[256]; int fd = open(argv[1], O_RDONLY|O_NOCTTY); assert(fd >= 0); assert(read(fd, buffer, 0) == 0); return 0; } Cc: stable@vger.kernel.org # v4.1 Signed-off-by:Vincent Bernat <vincent@bernat.im> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- 22 Aug, 2015 7 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Another couple of small ARM fixes. A patch from Masahiro Yamada who noticed that "make -jN all zImage" would end up generating bad images where N > 1, and a patch from Nicolas to fix the Marvell CPU user access optimisation code when page faults are disabled" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8418/1: add boot image dependencies to not generate invalid images ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Various low level fixes: fix more fallout from the FPU rework and the asm entry code rework, plus an MSI rework fix, and an idle-tracing fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/math-emu: Fix crash in fork() x86/fpu/math-emu: Fix math-emu boot crash x86/idle: Restore trace_cpu_idle to mwait_idle() calls x86/irq: Build correct vector mapping for multiple MSI interrupts Revert "sched/x86_64: Don't save flags on context switch"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Show backtrace when handling a SIGSEGV on --stdio mode perf tools: Fix buildid processing perf tools: Make fork event processing more resilient perf tools: Avoid deadlock when map_groups are broken
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A series of small fixlets for a regression visible on OMAP devices caused by the conversion of the OMAP interrupt chips to hierarchical interrupt domains. Mostly one liners on the driver side plus a small helper function in the core to avoid open coded mess in the drivers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Restore set_wake functionality irqchip/crossbar: Restore the mask on suspend behaviour ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism irqchip/crossbar: Restore the irq_set_type() mechanism genirq: Introduce irq_chip_set_type_parent() helper genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two minimalistic fixes for 4.2 regressions: - Eric fixed a thinko in the timer_list base switching code caused by the overhaul of the timer wheel. It can cause a cpu to see the wrong base for a timer while we move the timer around. - Guenter fixed a regression for IMX if booted w/o device tree, where the timer interrupt is not initialized and therefor the machine fails to boot" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/imx: Fix boot with non-DT systems timer: Write timer->flags atomically -
Ingo Molnar authored
During later stages of math-emu bootup the following crash triggers: math_emulate: 0060:c100d0a8 Kernel panic - not syncing: Math emulation needed in kernel CPU: 0 PID: 1511 Comm: login Not tainted 4.2.0-rc7+ #1012 [...] Call Trace: [<c181d50d>] dump_stack+0x41/0x52 [<c181c918>] panic+0x77/0x189 [<c1003530>] ? math_error+0x140/0x140 [<c164c2d7>] math_emulate+0xba7/0xbd0 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c1109c3c>] ? __alloc_pages_nodemask+0x12c/0x870 [<c136ac20>] ? proc_clear_tty+0x40/0x70 [<c136ac6e>] ? session_clear_tty+0x1e/0x30 [<c1003530>] ? math_error+0x140/0x140 [<c1003575>] do_device_not_available+0x45/0x70 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c18258e6>] error_code+0x5a/0x60 [<c1003530>] ? math_error+0x140/0x140 [<c100d0a8>] ? fpu__copy+0x138/0x1c0 [<c100c205>] arch_dup_task_struct+0x25/0x30 [<c1048cea>] copy_process.part.51+0xea/0x1480 [<c115a8e5>] ? dput+0x175/0x200 [<c136af70>] ? no_tty+0x30/0x30 [<c1157242>] ? do_vfs_ioctl+0x322/0x540 [<c104a21a>] _do_fork+0xca/0x340 [<c1057b06>] ? SyS_rt_sigaction+0x66/0x90 [<c104a557>] SyS_clone+0x27/0x30 [<c1824a80>] sysenter_do_call+0x12/0x12 The reason is the incorrect assumption in fpu_copy(), that FNSAVE can be executed from math-emu kernels as well. Don't try to copy the registers, the soft state will be copied by fork anyway, so the child task inherits the parent task's soft math state. With this fix applied math-emu kernels boot up fine on modern hardware and the 'no387 nofxsr' boot options. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
On a math-emu bootup the following crash occurs: Initializing CPU#0 ------------[ cut here ]------------ kernel BUG at arch/x86/kernel/traps.c:779! invalid opcode: 0000 [#1] SMP [...] EIP is at do_device_not_available+0xe/0x70 [...] Call Trace: [<c18238e6>] error_code+0x5a/0x60 [<c1002bd0>] ? math_error+0x140/0x140 [<c100bbd9>] ? fpu__init_cpu+0x59/0xa0 [<c1012322>] cpu_init+0x202/0x330 [<c104509f>] ? __native_set_fixmap+0x1f/0x30 [<c1b56ab0>] trap_init+0x305/0x346 [<c1b548af>] start_kernel+0x1a5/0x35d [<c1b542b4>] i386_start_kernel+0x82/0x86 The reason is that in the following commit: b1276c48 ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()") I failed to consider math-emu's limitation that it cannot execute the FNINIT instruction in kernel mode. The long term fix might be to allow math-emu to execute (certain) kernel mode FPU instructions, but for now apply the safe (albeit somewhat ugly) fix: initialize the emulation state explicitly without trapping out to the FPU emulator. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 21 Aug, 2015 5 commits
-
-
Christoph Hellwig authored
While the idea behind get_maintainer seems highly useful it's unfortunately way to trigger happy to grab people that once had a few commits to files. For someone like me who does a lot of tree-wide API work that leads to an incredible amount of Cc spam. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Commit c48a11c7 ("netvm: propagate page->pfmemalloc to skb") added checks for page->pfmemalloc to __skb_fill_page_desc(): if (page->pfmemalloc && !page->mapping) skb->pfmemalloc = true; It assumes page->mapping == NULL implies that page->pfmemalloc can be trusted. However, __delete_from_page_cache() can set set page->mapping to NULL and leave page->index value alone. Due to being in union, a non-zero page->index will be interpreted as true page->pfmemalloc. So the assumption is invalid if the networking code can see such a page. And it seems it can. We have encountered this with a NFS over loopback setup when such a page is attached to a new skbuf. There is no copying going on in this case so the page confuses __skb_fill_page_desc which interprets the index as pfmemalloc flag and the network stack drops packets that have been allocated using the reserves unless they are to be queued on sockets handling the swapping which is the case here and that leads to hangs when the nfs client waits for a response from the server which has been dropped and thus never arrive. The struct page is already heavily packed so rather than finding another hole to put it in, let's do a trick instead. We can reuse the index again but define it to an impossible value (-1UL). This is the page index so it should never see the value that large. Replace all direct users of page->pfmemalloc by page_is_pfmemalloc which will hide this nastiness from unspoiled eyes. The information will get lost if somebody wants to use page->index obviously but that was the case before and the original code expected that the information should be persisted somewhere else if that is really needed (e.g. what SLAB and SLUB do). [akpm@linux-foundation.org: fix blooper in slub] Fixes: c48a11c7 ("netvm: propagate page->pfmemalloc to skb") Signed-off-by:
Michal Hocko <mhocko@suse.com> Debugged-by:
Vlastimil Babka <vbabka@suse.com> Debugged-by:
Jiri Bohac <jbohac@suse.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "These are fixes for ASPM-related NULL pointer dereference crashes on Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on PA-RISC. These are both caused by things we merged in the v4.2 merge window. Details: Resource management - Don't use 64-bit bus addresses on PA-RISC Miscellaneous - Tolerate hierarchies with no Root Port" * tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't use 64-bit bus addresses on PA-RISC PCI: Tolerate hierarchies with no Root Port -
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - a regression fix at the videobuf2 core driver - fix error handling at mantis probing code - revert the IR encode patches, as the API is not mature enough. So, better to postpone the changes to a latter Kernel - fix Kconfig breakages on some randconfig scenarios. * tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] mantis: Fix error handling in mantis_dma_init() Revert "[media] rc: rc-ir-raw: Add scancode encoder callback" Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper" Revert "[media] rc: ir-rc5-decoder: Add encode capability" Revert "[media] rc: ir-rc6-decoder: Add encode capability" Revert "[media] rc: rc-core: Add support for encode_wakeup drivers" Revert "[media] rc: rc-loopback: Add loopback of filter scancodes" Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback" [media] vb2: Fix compilation breakage when !CONFIG_BUG [media] vb2: Only requeue buffers immediately once streaming is started [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled [media] media/dvb: fix ts2020.c Kconfig and build
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer fix from Dmitry Torokhov: "A small fixup to gpio_keys_polled driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_keys_polled - request GPIO pin as input.
-
