- 07 Jan, 2022 15 commits
-
-
Amit Cohen authored
Spectrum-4 will calculate hash function for bloom filter differently from the existing ASICs. There are two changes: 1. Instead of using one hash function to calculate 16 bits output (CRC-16), two functions will be used. 2. The chunks will be built differently, without padding. As preparation for support of Spectrum-4 bloom filter, add 'ops' structure to allow handling different calculation for different ASICs. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Amit Cohen authored
Spectrum-4 will calculate hash function for bloom filter differently from the existing ASICs. There are two changes: 1. Instead of using one hash function to calculate 16 bits output (CRC-16), two functions will be used. 2. The chunks will be built differently, without padding. As preparation for support of Spectrum-4 bloom filter, rename CRC table to include "sp2" prefix and "crc16", as next patch will add two additional tables. In addition, rename all the dedicated functions and defines for Spectrum-{2,3} to include "sp2" prefix. Signed-off-by: -
Amit Cohen authored
Spectrum-4 will calculate hash function for bloom filter differently from the existing ASICs. One of the changes is related to the way that the chunks will be build - without padding. As preparation for support of Spectrum-4 bloom filter, make mlxsw_sp_acl_bf_key_encode() more flexible, so it will be able to use it for Spectrum-4 as well. Signed-off-by:
-
Amit Cohen authored
Currently, mlxsw_sp_acl_bf_rule_count_index_get() is implemented before mlxsw_sp_acl_bf_index_get() but is used after it. Adding a new function for Spectrum-4 would make them further apart still. Fix by moving them around. Signed-off-by:
-
Amit Cohen authored
Spectrum-4 ASIC will support more virtual routers and local ports compared to the existing ASICs. Therefore, the virtual router and local port ACL key elements need to be increased. Introduce new key elements for Spectrum-4 to be aligned with the elements used already for other Spectrum ASICs. The key blocks layout is the same for Spectrum-4, so use the existing code for encode_block() and clear_block(), just create separate blocks. Note that size of `VIRT_ROUTER_MSB` is 4 bits in Spectrum-4, therefore declare it using `MLXSW_AFK_ELEMENT_INST_U32()`, in order to be able to set `.avoid_size_check` to true. Otherwise, `mlxsw_afk_blocks_check()` will fail and warn. Signed-off-by:
-
Amit Cohen authored
In Spectrum-4, the size of the virtual router ACL key element increased from 11 bits to 12 bits. In order to reuse the existing virtual router ACL key element enumerators for Spectrum-4, rename 'VIRT_ROUTER_8_10' and 'VIRT_ROUTER_0_7' to 'VIRT_ROUTER_MSB' and 'VIRT_ROUTER_LSB', respectively. No functional changes intended. Signed-off-by:
-
Jakub Kicinski authored
Ioana Ciornei says: ==================== dpaa2-eth: small cleanup These 3 patches are just part of a small cleanup on the dpaa2-eth and the dpaa2-switch drivers. In case we are hitting a case in which the fwnode of the root dprc device we initiate a deferred probe. On the dpaa2-switch side, if we are on the remove path, make sure that we check for a non-NULL pointer before accessing the port private structure. ==================== Link: https://lore.kernel.org/r/20220106135905.81923-1-ioana.ciornei@nxp.comSigned-off-by:
-
Ioana Ciornei authored
Before accessing the port private structure make sure that there is still a non-NULL pointer there. A NULL pointer access can happen when we are on the remove path, some switch ports are unregistered and some are in the process of unregistering. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
We could get into a situation when the fwnode of the parent device is not yet set because its probe didn't yet finish. When this happens, any caller of the dpaa2_mac_open() will not have the fwnode available, thus cause problems at the PHY connect time. Avoid this by just returning -EPROBE_DEFER from the dpaa2_mac_open when this happens. Signed-off-by:
-
Robert-Ionut Alexa authored
The parent pointer node handler must be declared with a NULL initializer. Before using it, a check must be performed to make sure that a valid address has been assigned to it. Signed-off-by:
Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-01-06 We've added 41 non-merge commits during the last 2 day(s) which contain a total of 36 files changed, 1214 insertions(+), 368 deletions(-). The main changes are: 1) Various fixes in the verifier, from Kris and Daniel. 2) Fixes in sockmap, from John. 3) bpf_getsockopt fix, from Kuniyuki. 4) INET_POST_BIND fix, from Menglong. 5) arm64 JIT fix for bpf pseudo funcs, from Hou. 6) BPF ISA doc improvements, from Christoph. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits) bpf: selftests: Add bind retry for post_bind{4, 6} bpf: selftests: Use C99 initializers in test_sock.c net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() bpf/selftests: Test bpf_d_path on rdonly_mem. libbpf: Add documentation for bpf_map batch operations selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3 xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames xdp: Move conversion to xdp_frame out of map functions page_pool: Store the XDP mem id page_pool: Add callback to init pages when they are allocated xdp: Allow registering memory model without rxq reference samples/bpf: xdpsock: Add timestamp for Tx-only operation samples/bpf: xdpsock: Add time-out for cleaning Tx samples/bpf: xdpsock: Add sched policy and priority support samples/bpf: xdpsock: Add cyclic TX operation capability samples/bpf: xdpsock: Add clockid selection support samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operation samples/bpf: xdpsock: Add VLAN support for Tx-only operation libbpf 1.0: Deprecate bpf_object__find_map_by_offset() API libbpf 1.0: Deprecate bpf_map__is_offload_neutral() ... ==================== Link: https://lore.kernel.org/r/20220107013626.53943-1-alexei.starovoitov@gmail.comSigned-off-by:
-
Alexei Starovoitov authored
Menglong Dong says: ==================== From: Menglong Dong <imagedong@tencent.com> The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in __inet_bind() is not handled properly. While the return value is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and exit: err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk); if (err) { inet->inet_saddr = inet->inet_rcv_saddr = 0; goto out_release_sock; } Let's take UDP for example and see what will happen. For UDP socket, it will be added to 'udp_prot.h.udp_table->hash' and 'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port() called success. If 'inet->inet_rcv_saddr' is specified here, then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong to (because inet_saddr is changed to 0), and UDP packet received will not be passed to this sock. If 'inet->inet_rcv_saddr' is not specified here, the sock will work fine, as it can receive packet properly, which is wired, as the 'bind()' is already failed. To undo the get_port() operation, introduce the 'put_port' field for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP proto, it is udp_lib_unhash(); For icmp proto, it is ping_unhash(). Therefore, after sys_bind() fail caused by BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which means that it can try to be binded to another port. The second patch use C99 initializers in test_sock.c The third patch is the selftests for this modification. Changes since v4: - use C99 initializers in test_sock.c before adding the test case Changes since v3: - add the third patch which use C99 initializers in test_sock.c Changes since v2: - NULL check for sk->sk_prot->put_port Changes since v1: - introduce 'put_port' field for 'struct proto' - add selftests for it ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Menglong Dong authored
With previous patch, kernel is able to 'put_port' after sys_bind() fails. Add the test for that case: rebind another port after sys_bind() fails. If the bind success, it means previous bind operation is already undoed. Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Menglong Dong authored
Use C99 initializers for the initialization of 'tests' in test_sock.c. Signed-off-by:
-
Menglong Dong authored
The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in __inet_bind() is not handled properly. While the return value is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and exit: err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk); if (err) { inet->inet_saddr = inet->inet_rcv_saddr = 0; goto out_release_sock; } Let's take UDP for example and see what will happen. For UDP socket, it will be added to 'udp_prot.h.udp_table->hash' and 'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port() called success. If 'inet->inet_rcv_saddr' is specified here, then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong to (because inet_saddr is changed to 0), and UDP packet received will not be passed to this sock. If 'inet->inet_rcv_saddr' is not specified here, the sock will work fine, as it can receive packet properly, which is wired, as the 'bind()' is already failed. To undo the get_port() operation, introduce the 'put_port' field for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP proto, it is udp_lib_unhash(); For icmp proto, it is ping_unhash(). Therefore, after sys_bind() fail caused by BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which means that it can try to be binded to another port. Signed-off-by:
-
- 06 Jan, 2022 25 commits
-
-
Hao Luo authored
The second parameter of bpf_d_path() can only accept writable memories. Rdonly_mem obtained from bpf_per_cpu_ptr() can not be passed into bpf_d_path for modification. This patch adds a selftest to verify this behavior. Signed-off-by:
Hao Luo <haoluo@google.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220106205525.2116218-1-haoluo@google.com
-
Grant Seltzer authored
This adds documention for: - bpf_map_delete_batch() - bpf_map_lookup_batch() - bpf_map_lookup_and_delete_batch() - bpf_map_update_batch() This also updates the public API for the `keys` parameter of `bpf_map_delete_batch()`, and both the `keys` and `values` parameters of `bpf_map_update_batch()` to be constants. Signed-off-by:
Grant Seltzer <grantseltzer@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
PT_REGS*() macro on some architectures force-cast struct pt_regs to other types (user_pt_regs, etc) and might drop volatile modifiers, if any. Volatile isn't really required as pt_regs value isn't supposed to change during the BPF program run, so this is correct behavior. But progs/loop3.c relies on that volatile modifier to ensure that loop is preserved. Fix loop3.c by declaring i and sum variables as volatile instead. It preserves the loop and makes the test pass on all architectures (including s390x which is currently broken). Fixes: 3cc31d79 ("libbpf: Normalize PT_REGS_xxx() macro definitions") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220106205156.955373-1-andrii@kernel.org
-
Daniel Borkmann authored
Laurent reported that they have seen a significant amount of TCP retransmissions at high throughput from applications residing in network namespaces talking to the outside world via veths. The drops were seen on the qdisc layer (fq_codel, as per systemd default) of the phys device such as ena or virtio_net due to all traffic hitting a _single_ TX queue _despite_ multi-queue device. (Note that the setup was _not_ using XDP on veths as the issue is generic.) More specifically, after edbea922 ("veth: Store queue_mapping independently of XDP prog presence") which made it all the way back to v4.19.184+, skb_record_rx_queue() would set skb->queue_mapping to 1 (given 1 RX and 1 TX queue by default for veths) instead of leaving at 0. This is eventually retained and callbacks like ena_select_queue() will also pick single queue via netdev_core_pick_tx()'s ndo_select_queue() once all the traffic is forwarded to that device via upper stack or other means. Similarly, for others not implementing ndo_select_queue() if XPS is disabled, netdev_pick_tx() might call into the skb_tx_hash() and check for prior skb_rx_queue_recorded() as well. In general, it is a _bad_ idea for virtual devices like veth to mess around with queue selection [by default]. Given dev->real_num_tx_queues is by default 1, the skb->queue_mapping was left untouched, and so prior to edbea922 the netdev_core_pick_tx() could do its job upon __dev_queue_xmit() on the phys device. Unbreak this and restore prior behavior by removing the skb_record_rx_queue() from veth_xmit() altogether. If the veth peer has an XDP program attached, then it would return the first RX queue index in xdp_md->rx_queue_index (unless configured in non-default manner). However, this is still better than breaking the generic case. Fixes: edbea922 ("veth: Store queue_mapping independently of XDP prog presence") Fixes: 638264dc ("veth: Support per queue XDP ring") Reported-by:
Laurent Bernaille <laurent.bernaille@datadoghq.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Greg Kroah-Hartman authored
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ibmveth sysfs code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Cristobal Forno <cforno12@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: netdev@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Jiapeng Chong authored
Clean the following coccicheck warning: ./drivers/net/ethernet/sfc/efx_channels.c:870:36-37: WARNING opportunity for swap(). ./drivers/net/ethernet/sfc/efx_channels.c:824:36-37: WARNING opportunity for swap(). Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
Tom Rix authored
In ethtool_get_phy_stats(), the phydev varaible is set to dev->phydev but dev->phydev is still used. Replace dev->phydev uses with phydev. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King (Oracle) authored
Convert the PCS selection to use mac_select_pcs, which allows the PCS to perform any validation it needs. We must use separate phylink_pcs instances for the USX and SGMII PCS, rather than just changing the "ops" pointer before re-setting it to phylink as this interface queries the PCS, rather than requesting it to be changed. Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Coco Li authored
Eric Dumazet suggested to allow users to modify max GRO packet size. We have seen GRO being disabled by users of appliances (such as wifi access points) because of claimed bufferbloat issues, or some work arounds in sch_cake, to split GRO/GSO packets. Instead of disabling GRO completely, one can chose to limit the maximum packet size of GRO packets, depending on their latency constraints. This patch adds a per device gro_max_size attribute that can be changed with ip link command. ip link set dev eth0 gro_max_size 16000 Suggested-by:
Coco Li <lixiaoyan@google.com> Signed-off-by:
-
Miroslav Lichvar authored
When multiple sockets using the SOF_TIMESTAMPING_BIND_PHC flag received a packet with a hardware timestamp (e.g. multiple PTP instances in different PTP domains using the UDPv4/v6 multicast or L2 transport), the timestamps received on some sockets were corrupted due to repeated conversion of the same timestamp (by the same or different vclocks). Fix ptp_convert_timestamp() to not modify the shared skb timestamp and return the converted timestamp as a ktime_t instead. If the conversion fails, return 0 to not confuse the application with timestamps corresponding to an unexpected PHC. Fixes: d7c08826 ("net: socket: support hardware timestamp conversion to PHC bound") Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
As discussed during review here: https://patchwork.kernel.org/project/netdevbpf/patch/20220105132141.2648876-3-vladimir.oltean@nxp.com/ we should inform developers about pitfalls of concurrent access to the boolean properties of dsa_switch and dsa_port, now that they've been converted to bit fields. No other measure than a comment needs to be taken, since the code paths that update these bit fields are not concurrent with each other. Suggested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
This is a cosmetic incremental fixup to commits 7787ff77 ("net: dsa: merge all bools of struct dsa_switch into a single u32") bde82f38 ("net: dsa: merge all bools of struct dsa_port into a single u8") The desire to make this change was enunciated after posting these patches here: https://patchwork.kernel.org/project/netdevbpf/cover/20220105132141.2648876-1-vladimir.oltean@nxp.com/ but due to a slight timing overlap (message posted at 2:28 p.m. UTC, merge commit is at 2:46 p.m. UTC), that comment was missed and the changes were applied as-is. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== DSA initialization cleanups These patches contain miscellaneous work that makes the DSA init code path symmetric with the teardown path, and some additional patches carried by Ansuel Smith for his register access over Ethernet work, but those patches can be applied as-is too. https://patchwork.kernel.org/project/netdevbpf/patch/20211214224409.5770-3-ansuelsmth@gmail.com/ ==================== Signed-off-by:
-
Vladimir Oltean authored
It is said that as soon as a network interface is registered, all its resources should have already been prepared, so that it is available for sending and receiving traffic. One of the resources needed by a DSA slave interface is the master. dsa_tree_setup -> dsa_tree_setup_ports -> dsa_port_setup -> dsa_slave_create -> register_netdevice -> dsa_tree_setup_master -> dsa_master_setup -> sets up master->dsa_ptr, which enables reception Therefore, there is a short period of time after register_netdevice() during which the master isn't prepared to pass traffic to the DSA layer (master->dsa_ptr is checked by eth_type_trans). Same thing during unregistration, there is a time frame in which packets might be missed. Note that this change opens us to another race: dsa_master_find_slave() will get invoked potentially earlier than the slave creation, and later than the slave deletion. Since dp->slave starts off as a NULL pointer, the earlier calls aren't a problem, but the later calls are. To avoid use-after-free, we should zeroize dp->slave before calling dsa_slave_destroy(). In practice I cannot really test real life improvements brought by this change, since in my systems, netdevice creation races with PHY autoneg which takes a few seconds to complete, and that masks quite a few races. Effects might be noticeable in a setup with fixed links all the way to an external system. Signed-off-by: -
Vladimir Oltean authored
After commit a57d8c21 ("net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports"), the port setup and teardown procedure became asymmetric. The fact of the matter is that user ports need the shared ports to be up before they can be used for CPU-initiated termination. And since we register net devices for the user ports, those won't be functional until we also call the setup for the shared (CPU, DSA) ports. But we may do that later, depending on the port numbering scheme of the hardware we are dealing with. It just makes sense that all shared ports are brought up before any user port is. I can't pinpoint any issue due to the current behavior, but let's change it nonetheless, for consistency's sake. Signed-off-by:
-
Vladimir Oltean authored
DSA needs to simulate master tracking events when a binding is first with a DSA master established and torn down, in order to give drivers the simplifying guarantee that ->master_state_change calls are made only when the master's readiness state to pass traffic changes. master_state_change() provide a operational bool that DSA driver can use to understand if DSA master is operational or not. To avoid races, we need to block the reception of NETDEV_UP/NETDEV_CHANGE/NETDEV_GOING_DOWN events in the netdev notifier chain while we are changing the master's dev->dsa_ptr (this changes what netdev_uses_dsa(dev) reports). The dsa_master_setup() and dsa_master_teardown() functions optionally require the rtnl_mutex to be held, if the tagger needs the master to be promiscuous, these functions call dev_set_promiscuity(). Move the rtnl_lock() from that function and make it top-level. Signed-off-by:
-
Vladimir Oltean authored
At present there are two paths for changing the MTU of the DSA master. The first is: dsa_tree_setup -> dsa_tree_setup_ports -> dsa_port_setup -> dsa_slave_create -> dsa_slave_change_mtu -> dev_set_mtu(master) The second is: dsa_tree_setup -> dsa_tree_setup_master -> dsa_master_setup -> dev_set_mtu(dev) So the dev_set_mtu() call from dsa_master_setup() has been effectively superseded by the dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN) that is done from dsa_slave_create() for each user port. The later function also updates the master MTU according to the largest user port MTU from the tree. Therefore, updating the master MTU through a separate code path isn't needed. Signed-off-by: -
Vladimir Oltean authored
Currently dsa_slave_create() has two sequences of rtnl_lock/rtnl_unlock in a row. Remove the rtnl_unlock() and rtnl_lock() in between, such that the operation can execute slighly faster. Signed-off-by:
-
Vladimir Oltean authored
In dsa_slave_create() there are 2 sections that take rtnl_lock(): MTU change and netdev registration. They are separated by PHY initialization. There isn't any strict ordering requirement except for the fact that netdev registration should be last. Therefore, we can perform the MTU change a bit later, after the PHY setup. A future change will then be able to merge the two rtnl_lock sections into one. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-01-06 1) Fix some clang_analyzer warnings about never read variables. From luo penghao. 2) Check for pols[0] only once in xfrm_expand_policies(). From Jean Sacren. 3) The SA curlft.use_time was updated only on SA cration time. Update whenever the SA is used. From Antony Antony 4) Add support for SM3 secure hash. From Xu Jia. 5) Add support for SM4 symmetric cipher algorithm. From Xu Jia. 6) Add a rate limit for SA mapping change messages. From Antony Antony. ==================== Signed-off-by: -
Toke Høiland-Jørgensen authored
Add an xdp_do_redirect_frame() variant which supports pre-computed xdp_frame structures. This will be used in bpf_prog_run() to avoid having to write to the xdp_frame structure when the XDP program doesn't modify the frame boundaries. Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
All map redirect functions except XSK maps convert xdp_buff to xdp_frame before enqueueing it. So move this conversion of out the map functions and into xdp_do_redirect(). This removes a bit of duplicated code, but more importantly it makes it possible to support caller-allocated xdp_frame structures, which will be added in a subsequent commit. Signed-off-by:
-
Toke Høiland-Jørgensen authored
Store the XDP mem ID inside the page_pool struct so it can be retrieved later for use in bpf_prog_run(). Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20220103150812.87914-4-toke@redhat.com
-
Toke Høiland-Jørgensen authored
Add a new callback function to page_pool that, if set, will be called every time a new page is allocated. This will be used from bpf_test_run() to initialise the page data with the data provided by userspace when running XDP programs with redirect turned on. Signed-off-by:
-
Toke Høiland-Jørgensen authored
The functions that register an XDP memory model take a struct xdp_rxq as parameter, but the RXQ is not actually used for anything other than pulling out the struct xdp_mem_info that it embeds. So refactor the register functions and export variants that just take a pointer to the xdp_mem_info. This is in preparation for enabling XDP_REDIRECT in bpf_prog_run(), using a page_pool instance that is not connected to any network device. Signed-off-by:
-
