- 23 Aug, 2020 2 commits
-
-
Peter Chen authored
These two parameters are used to improve USB signal for board level, in this commit, we read it from the dtb, and write to related register during the initialization. Signed-off-by:Peter Chen <peter.chen@nxp.com>
-
Peter Chen authored
Add two parameters which are used to tune USB signal for samsung picophy, which is used at imx7d, imx8mm, and imx8mn. Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Jun Li <jun.li@nxp.com> Signed-off-by:
-
- 18 Aug, 2020 25 commits
-
-
Bastien Nocera authored
__check_usb_generic() doesn't explain very well what the function actually does: It checks to see whether the driver is non-generic and matches the device. Change it to check_for_non_generic_match() Signed-off-by:
Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20200818110445.509668-2-hadess@hadess.netSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Saenz Julienne authored
This reverts commit 44331189. Now that the VL805 init routine is run through a reset controller driver the device dependencies are being taken care of by the device core. No need to do it manually here. Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200629161845.6021-10-nsaenzjulienne@suse.deSigned-off-by:
-
Nicolas Saenz Julienne authored
This reverts commit fbbc5ff3. The vl805 init routine has moved into drivers/reset/reset-raspberrypi.c Reviewed-by:
-
Nicolas Saenz Julienne authored
The board doesn't need the quirks to be run, and takes care of its own initialization through a reset controller device. So let's bypass them. Reviewed-by:
-
Nicolas Saenz Julienne authored
This reverts commit c65822fe. The initialization of Raspberry Pi 4's USB chip is now handled through a reset controller. No need to directly call the firmware routine through a PCI quirk. Reviewed-by:
-
Nicolas Saenz Julienne authored
Some atypical users of xhci-pci might need to manually reset their xHCI controller before starting the HCD setup. Check if a reset controller device is available to the PCI bus and trigger a reset. Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Nicolas Saenz Julienne authored
The chip is hardwired to the board's PCIe bus and needs to be properly setup trough a firmware routine after a PCI fundamental reset. Pass the reset controller phandle that takes care of triggering the initialization to the relevant PCI device. Reviewed-by:
-
Nicolas Saenz Julienne authored
Now that the reset driver exposing Raspberry Pi 4's firmware based USB reset routine is available, let's add the device tree node exposing it. Reviewed-by:
-
Nicolas Saenz Julienne authored
Raspberry Pi 4's co-processor controls some of the board's HW initialization process, but it's up to Linux to trigger it when relevant. Introduce a reset controller capable of interfacing with RPi4's co-processor that models these firmware initialization routines as reset lines. Reviewed-by:
-
Nicolas Saenz Julienne authored
The firmware running on the RPi VideoCore can be used to reset and initialize HW controlled by the firmware. Reviewed-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
Romain Perier <romain.perier@gmail.com> Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200817090209.26351-8-allen.cryptic@gmail.comSigned-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
Eli Billauer authored
usb_kill_anchored_urbs() is commonly used to cancel all URBs on an anchor just before releasing resources which the URBs rely on. By doing so, users of this function rely on that no completer callbacks will take place from any URB on the anchor after it returns. However if this function is called in parallel with __usb_hcd_giveback_urb processing a URB on the anchor, the latter may call the completer callback after usb_kill_anchored_urbs() returns. This can lead to a kernel panic due to use after release of memory in interrupt context. The race condition is that __usb_hcd_giveback_urb() first unanchors the URB and then makes the completer callback. Such URB is hence invisible to usb_kill_anchored_urbs(), allowing it to return before the completer has been called, since the anchor's urb_list is empty. Even worse, if the racing completer callback resubmits the URB, it may remain in the system long after usb_kill_anchored_urbs() returns. Hence list_empty(&anchor->urb_list), which is used in the existing while-loop, doesn't reliably ensure that all URBs of the anchor are gone. A similar problem exists with usb_poison_anchored_urbs() and usb_scuttle_anchored_urbs(). This patch adds an external do-while loop, which ensures that all URBs are indeed handled before these three functions return. This change has no effect at all unless the race condition occurs, in which case the loop will busy-wait until the racing completer callback has finished. This is a rare condition, so the CPU waste of this spinning is negligible. The additional do-while loop relies on usb_anchor_check_wakeup(), which returns true iff the anchor list is empty, and there is no __usb_hcd_giveback_urb() in the system that is in the middle of the unanchor-before-complete phase. The @suspend_wakeups member of struct usb_anchor is used for this purpose, which was introduced to solve another problem which the same race condition causes, in commit 6ec4147e ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done"). The surely_empty variable is necessary, because usb_anchor_check_wakeup() must be called with the lock held to prevent races. However the spinlock must be released and reacquired if the outer loop spins with an empty URB list while waiting for the unanchor-before-complete passage to finish: The completer callback may very well attempt to take the very same lock. To summarize, using usb_anchor_check_wakeup() means that the patched functions can return only when the anchor's list is empty, and there is no invisible URB being processed. Since the inner while loop finishes on the empty list condition, the new do-while loop will terminate as well, except for when the said race condition occurs. Signed-off-by:
Eli Billauer <eli.billauer@gmail.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200731054650.30644-1-eli.billauer@gmail.comSigned-off-by:
-
Thierry Reding authored
The exact error that happened trying to get the VBUS supply can be useful to troubleshoot what's going on. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200806160248.3936771-2-thierry.reding@gmail.comSigned-off-by:
-
Thierry Reding authored
If the connector is the child of a USB port and that USB port already has a VBUS supply attached to it, it would be redundant to require the connector to have a VBUS supply. In this case, allow the VBUS supply to be optional. Signed-off-by:
-
Xu Wang authored
usb_free_coherent() is safe with NULL addr and this check is not required. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200810020802.9082-1-vulab@iscas.ac.cnSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in a usb_stor_dbg debug message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
JC Kuo authored
Remove a duplicated register "IPFS_XUSB_HOST_MSI_BAR_SZ_0" from tegra124_xusb_context_ipfs[] array. Signed-off-by:
JC Kuo <jckuo@nvidia.com> Link: https://lore.kernel.org/r/20200811093531.720503-1-jckuo@nvidia.comSigned-off-by:
-
Frank Wunderlich authored
fix this small typo u3_ports_disabed => u3_ports_disabled Fixes: 55ba6e9e (usb: xhci-mtk: support option to disable usb3 ports) Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Reviewed-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20200808124906.89976-1-linux@fw-web.deSigned-off-by:
-
YueHaibing authored
It is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200731082008.33016-1-yuehaibing@huawei.comSigned-off-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 7 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
