- 20 Apr, 2019 17 commits
-
-
Maurizio Lombardi authored
[ Upstream commit 165aa2bf ] In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhang Rui authored
[ Upstream commit e925b5be ] kthread name only allows 15 characters (TASK_COMMON_LEN is 16). Thus rename the kthreads created by intel_powerclamp driver from "kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid" to avoid truncated kthead name for cpu 100 and later. Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Matthew Garrett authored
[ Upstream commit 396ee4d0 ] int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction. Signed-off-by:
Matthew Garrett <mjg59@google.com> Signed-off-by:
-
Matthew Garrett authored
[ Upstream commit 16fc8eca ] Add more supported DPTF policies than the driver currently exposes. Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 35122495 ] "cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it. Fixes: bcb7dd9e ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
-
Luc Van Oostenryck authored
[ Upstream commit aa36e361 ] This variable is declared as: static struct powerclamp_worker_data * __percpu worker_data; In other words, a percpu pointer to struct ... But this variable not used like so but as a pointer to a percpu struct powerclamp_worker_data. So fix the declaration as: static struct powerclamp_worker_data __percpu *worker_data; This also quiets Sparse's warnings from __verify_pcpu_ptr(), like: 494:49: warning: incorrect type in initializer (different address spaces) 494:49: expected void const [noderef] <asn:3> *__vpp_verify 494:49: got struct powerclamp_worker_data * Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b4748e7a ] The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition. This error predates the git history, so no idea when this error was introduced. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 9ce58dd7 ] Building with clang finds a mistaken __init tag: WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host() The function davinci_mmcsd_probe() references the function __init init_mmcsd_host(). This is often because davinci_mmcsd_probe lacks a __init annotation or the annotation of init_mmcsd_host is wrong. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 587443e7 ] Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow. Fixes: a0c64a17 ("mlx4: Add alias_guid mechanism") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 41c8d0ad ] We have to free on ->remove() the allocated resources on ->probe(). Fixes: d47d8836 ("auxdisplay: Add HD44780 Character LCD support") Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit dcd0feac ] In case request_region fails, the fix returns an error code to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 6ade657d ] In case ioremap_nocache fails, the fix releases chip and returns an error code upstream to avoid NULL pointer dereference. Signed-off-by:
-
Lukas Czerner authored
[ Upstream commit 6c732840 ] Currently when the file system resize using ext4_resize_fs() fails it will report into log that "resized filesystem to <requested block count>". However this may not be true in the case of failure. Use the current block count as returned by ext4_blocks_count() to report the block count. Additionally, report a warning that "error occurred during file system resize" Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Lukas Czerner authored
[ Upstream commit d64264d6 ] Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh in case ext4_journal_get_write_access() fails. Additionally kvfree() is missing in the same error path. Fix it by moving the ext4_journal_get_write_access() before the ext4 sb update as Ted suggested and release n_group_desc and gdb_bh in case it fails. Fixes: 61a9c11e ("ext4: add missing brelse() add_new_gdb_meta_bg()'s error path") Signed-off-by:
-
Stephane Eranian authored
[ Upstream commit d9c1bb2f ] On mmap(), perf_events generates a RECORD_MMAP record and then checks which events are interested in this record. There are currently 2 versions of mmap records: RECORD_MMAP and RECORD_MMAP2. MMAP2 is larger. The event configuration controls which version the user level tool accepts. If the event->attr.mmap2=1 field then MMAP2 record is returned. The perf_event_mmap_output() takes care of this. It checks attr->mmap2 and corrects the record fields before putting it in the sampling buffer of the event. At the end the function restores the modified MMAP record fields. The problem is that the function restores the size but not the type. Thus, if a subsequent event only accepts MMAP type, then it would instead receive an MMAP2 record with a size of MMAP record. This patch fixes the problem by restoring the record type on exit. Signed-off-by:
Stephane Eranian <eranian@google.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Fixes: 13d7a241 ("perf: Add attr->mmap2 attribute to an event") Link: http://lkml.kernel.org/r/20190307185233.225521-1-eranian@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Corentin Labbe authored
[ Upstream commit 0728aeb7 ] We have now a HSDK device in our kernelci lab, but kernel builded via the hsdk_defconfig lacks ramfs supports, so it cannot boot kernelci jobs yet. So this patch enable CONFIG_BLK_DEV_RAM in hsdk_defconfig. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Acked-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit edb64bca ] In case of devboards we really often disable bootloader and load Linux image in memory via JTAG. Even if kernel tries to verify uboot_tag and uboot_arg there is sill a chance that we treat some garbage in registers as valid u-boot arguments in JTAG case. E.g. it is enough to have '1' in r0 to treat any value in r2 as a boot command line. So check that magic number passed from u-boot is correct and drop u-boot arguments otherwise. That helps to reduce the possibility of using garbage as u-boot arguments in JTAG case. We can safely check U-boot magic value (0x0) in linux passed via r1 register as U-boot pass it from the beginning. So there is no backward-compatibility issues. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
- 17 Apr, 2019 23 commits
-
-
Greg Kroah-Hartman authored
-
Tomohiro Mayama authored
commit a8772e5d upstream. This patch makes USB ports functioning again. Fixes: 955bebde ("arm64: dts: rockchip: add rk3328-rock64 board") Cc: stable@vger.kernel.org Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Tomohiro Mayama <parly-gh@iris.mystia.org> Tested-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Katsuhiro Suzuki authored
commit ef05bcb6 upstream. This patch fixes pin assign of vcc_host1_5v. This regulator is controlled by USB20_HOST_DRV signal. ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV. GPIO0_D3 pin is for SPDIF_TX_M0. Signed-off-by:
-
Ilya Dryomov authored
commit eb40c0ac upstream. Some devices don't use blk_integrity but still want stable pages because they do their own checksumming. Examples include rbd and iSCSI when data digests are negotiated. Stacking DM (and thus LVM) on top of these devices results in sporadic checksum errors. Set BDI_CAP_STABLE_WRITES if any underlying device has it set. Cc: stable@vger.kernel.org Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Andre Przywara authored
commit 9cde402a upstream. There is a Marvell 88SE9170 PCIe SATA controller I found on a board here. Some quick testing with the ARM SMMU enabled reveals that it suffers from the same requester ID mixup problems as the other Marvell chips listed already. Add the PCI vendor/device ID to the list of chips which need the workaround. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org Signed-off-by:
-
Lendacky, Thomas authored
commit 3966c3fe upstream. Spurious interrupt support was added to perf in the following commit, almost a decade ago: 63e6be6d ("perf, x86: Catch spurious interrupts after disabling counters") The two previous patches (resolving the race condition when disabling a PMC and NMI latency mitigation) allow for the removal of this older spurious interrupt support. Currently in x86_pmu_stop(), the bit for the PMC in the active_mask bitmap is cleared before disabling the PMC, which sets up a race condition. This race condition was mitigated by introducing the running bitmap. That race condition can be eliminated by first disabling the PMC, waiting for PMC reset on overflow and then clearing the bit for the PMC in the active_mask bitmap. The NMI handler will not re-enable a disabled counter. If x86_pmu_stop() is called from the perf NMI handler, the NMI latency mitigation support will guard against any unhandled NMI messages. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lendacky, Thomas authored
commit 6d3edaae upstream. On AMD processors, the detection of an overflowed PMC counter in the NMI handler relies on the current value of the PMC. So, for example, to check for overflow on a 48-bit counter, bit 47 is checked to see if it is 1 (not overflowed) or 0 (overflowed). When the perf NMI handler executes it does not know in advance which PMC counters have overflowed. As such, the NMI handler will process all active PMC counters that have overflowed. NMI latency in newer AMD processors can result in multiple overflowed PMC counters being processed in one NMI and then a subsequent NMI, that does not appear to be a back-to-back NMI, not finding any PMC counters that have overflowed. This may appear to be an unhandled NMI resulting in either a panic or a series of messages, depending on how the kernel was configured. To mitigate this issue, add an AMD handle_irq callback function, amd_pmu_handle_irq(), that will invoke the common x86_pmu_handle_irq() function and upon return perform some additional processing that will indicate if the NMI has been handled or would have been handled had an earlier NMI not handled the overflowed PMC. Using a per-CPU variable, a minimum value of the number of active PMCs or 2 will be set whenever a PMC is active. This is used to indicate the possible number of NMIs that can still occur. The value of 2 is used for when an NMI does not arrive at the LAPIC in time to be collapsed into an already pending NMI. Each time the function is called without having handled an overflowed counter, the per-CPU value is checked. If the value is non-zero, it is decremented and the NMI indicates that it handled the NMI. If the value is zero, then the NMI indicates that it did not handle the NMI. Signed-off-by:
-
Lendacky, Thomas authored
commit 914123fa upstream. On AMD processors, the detection of an overflowed counter in the NMI handler relies on the current value of the counter. So, for example, to check for overflow on a 48 bit counter, bit 47 is checked to see if it is 1 (not overflowed) or 0 (overflowed). There is currently a race condition present when disabling and then updating the PMC. Increased NMI latency in newer AMD processors makes this race condition more pronounced. If the counter value has overflowed, it is possible to update the PMC value before the NMI handler can run. The updated PMC value is not an overflowed value, so when the perf NMI handler does run, it will not find an overflowed counter. This may appear as an unknown NMI resulting in either a panic or a series of messages, depending on how the kernel is configured. To eliminate this race condition, the PMC value must be checked after disabling the counter. Add an AMD function, amd_pmu_disable_all(), that will wait for the NMI handler to reset any active and overflowed counter after calling x86_pmu_disable_all(). Signed-off-by:
-
Max Filippov authored
commit ada770b1 upstream. return_address returns the address that is one level higher in the call stack than requested in its argument, because level 0 corresponds to its caller's return address. Use requested level as the number of stack frames to skip. This fixes the address reported by might_sleep and friends. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mel Gorman authored
commit 0e9f0245 upstream. A NULL pointer dereference bug was reported on a distribution kernel but the same issue should be present on mainline kernel. It occured on s390 but should not be arch-specific. A partial oops looks like: Unable to handle kernel pointer dereference in virtual kernel address space ... Call Trace: ... try_to_wake_up+0xfc/0x450 vhost_poll_wakeup+0x3a/0x50 [vhost] __wake_up_common+0xbc/0x178 __wake_up_common_lock+0x9e/0x160 __wake_up_sync_key+0x4e/0x60 sock_def_readable+0x5e/0x98 The bug hits any time between 1 hour to 3 days. The dereference occurs in update_cfs_rq_h_load when accumulating h_load. The problem is that cfq_rq->h_load_next is not protected by any locking and can be updated by parallel calls to task_h_load. Depending on the compiler, code may be generated that re-reads cfq_rq->h_load_next after the check for NULL and then oops when reading se->avg.load_avg. The dissassembly showed that it was possible to reread h_load_next after the check for NULL. While this does not appear to be an issue for later compilers, it's still an accident if the correct code is generated. Full locking in this path would have high overhead so this patch uses READ_ONCE to read h_load_next only once and check for NULL before dereferencing. It was confirmed that there were no further oops after 10 days of testing. As Peter pointed out, it is also necessary to use WRITE_ONCE() to avoid any potential problems with store tearing. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Fixes: 68520796 ("sched: Move h_load calculation to task_h_load()") Link: https://lkml.kernel.org/r/20190319123610.nsivgf3mjbjjesxb@techsingularity.netSigned-off-by:
-
Dan Carpenter authored
commit 42d8644b upstream. The "call" variable comes from the user in privcmd_ioctl_hypercall(). It's an offset into the hypercall_page[] which has (PAGE_SIZE / 32) elements. We need to put an upper bound on it to prevent an out of bounds access. Cc: stable@vger.kernel.org Fixes: 1246ae0b ("xen: add variable hypercall caller") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Will Deacon authored
commit 1e6f5440 upstream. Calling dump_backtrace() with a pt_regs argument corresponding to userspace doesn't make any sense and our unwinder will simply print "Call trace:" before unwinding the stack looking for user frames. Rather than go through this song and dance, just return early if we're passed a user register state. Cc: <stable@vger.kernel.org> Fixes: 1149aad1 ("arm64: Add dump_backtrace() in show_regs") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Peter Geis authored
commit 6fd8b978 upstream. Several rk3328 based boards experience high rgmii tx error rates. This is due to several pins in the rk3328.dtsi rgmii pinmux that are missing a defined pull strength setting. This causes the pinmux driver to default to 2ma (bit mask 00). These pins are only defined in the rk3328.dtsi, and are not listed in the rk3328 specification. The TRM only lists them as "Reserved" (RK3328 TRM V1.1, 3.3.3 Detail Register Description, GRF_GPIO0B_IOMUX, GRF_GPIO0C_IOMUX, GRF_GPIO0D_IOMUX). However, removal of these pins from the rgmii pinmux definition causes the interface to fail to transmit. Also, the rgmii tx and rx pins defined in the dtsi are not consistent with the rk3328 specification, with tx pins currently set to 12ma and rx pins set to 2ma. Fix this by setting tx pins to 8ma and the rx pins to 4ma, consistent with the specification. Defining the drive strength for the undefined pins eliminated the high tx packet error rate observed under heavy data transfers. Aligning the drive strength to the TRM values eliminated the occasional packet retry errors under iperf3 testing. This allows much higher data rates with no recorded tx errors. Tested on the rk3328-roc-cc board. Fixes: 52e02d37 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Cc: stable@vger.kernel.org Signed-off-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
-
Will Deacon authored
commit 045afc24 upstream. Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't explicitly set the return value on the non-faulting path and instead leaves it holding the result of the underlying atomic operation. This means that any FUTEX_WAKE_OP atomic operation which computes a non-zero value will be reported as having failed. Regrettably, I wrote the buggy code back in 2011 and it was upstreamed as part of the initial arm64 support in 2012. The reasons we appear to get away with this are: 1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get exercised by futex() test applications 2. If the result of the atomic operation is zero, the system call behaves correctly 3. Prior to version 2.25, the only operation used by GLIBC set the futex to zero, and therefore worked as expected. From 2.25 onwards, FUTEX_WAKE_OP is not used by GLIBC at all. Fix the implementation by ensuring that the return value is either 0 to indicate that the atomic operation completed successfully, or -EFAULT if we encountered a fault when accessing the user mapping. Cc: <stable@kernel.org> Fixes: 6170a974 ("arm64: Atomic operations") Signed-off-by:
-
David Engraf authored
commit e7dfb6d0 upstream. The function argument for the ISC_D0 on PC9 was incorrect. According to the documentation it should be 'C' aka 3. Signed-off-by:
David Engraf <david.engraf@sysgo.com> Reviewed-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 7f16cb67 ("ARM: at91/dt: add sama5d2 pinmux") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
Peter Ujfalusi authored
commit 4f96dc0a upstream. Correctly map the regulators used by tlv320aic3106. Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators. Cc: <Stable@vger.kernel.org> # v4.14+ Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 66913706 upstream. Correctly map the regulators used by tlv320aic3106. Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators. Cc: <Stable@vger.kernel.org> # v4.14+ Signed-off-by:
-
Cornelia Huck authored
commit cf94db21 upstream. vring_create_virtqueue() allows the caller to specify via the may_reduce_num parameter whether the vring code is allowed to allocate a smaller ring than specified. However, the split ring allocation code tries to allocate a smaller ring on allocation failure regardless of what the caller specified. This may cause trouble for e.g. virtio-pci in legacy mode, which does not support ring resizing. (The packed ring code does not resize in any case.) Let's fix this by bailing out immediately in the split ring code if the requested size cannot be allocated and may_reduce_num has not been specified. While at it, fix a typo in the usage instructions. Fixes: 2a2d1382 ("virtio: Add improved queue allocation API") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Halil Pasic <pasic@linux.ibm.com> Reviewed-by:
Jens Freimann <jfreimann@redhat.com> Signed-off-by:
-
Kefeng Wang authored
commit e8458e7a upstream. When CONFIG_SPARSE_IRQ is disable, the request_mutex in struct irq_desc is not initialized which causes malfunction. Fixes: 9114014c ("genirq: Add mutex to irq desc to serialize request/free_irq()") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190404074512.145533-1-wangkefeng.wang@huawei.comSigned-off-by:
-
Stephen Boyd authored
commit 325aa195 upstream. If a child irqchip calls irq_chip_set_wake_parent() but its parent irqchip has the IRQCHIP_SKIP_SET_WAKE flag set an error is returned. This is inconsistent behaviour vs. set_irq_wake_real() which returns 0 when the irqchip has the IRQCHIP_SKIP_SET_WAKE flag set. It doesn't attempt to walk the chain of parents and set irq wake on any chips that don't have the flag set either. If the intent is to call the .irq_set_wake() callback of the parent irqchip, then we expect irqchip implementations to omit the IRQCHIP_SKIP_SET_WAKE flag and implement an .irq_set_wake() function that calls irq_chip_set_wake_parent(). The problem has been observed on a Qualcomm sdm845 device where set wake fails on any GPIO interrupts after applying work in progress wakeup irq patches to the GPIO driver. The chain of chips looks like this: QCOM GPIO -> QCOM PDC (SKIP) -> ARM GIC (SKIP) The GPIO controllers parent is the QCOM PDC irqchip which in turn has ARM GIC as parent. The QCOM PDC irqchip has the IRQCHIP_SKIP_SET_WAKE flag set, and so does the grandparent ARM GIC. The GPIO driver doesn't know if the parent needs to set wake or not, so it unconditionally calls irq_chip_set_wake_parent() causing this function to return a failure because the parent irqchip (PDC) doesn't have the .irq_set_wake() callback set. Returning 0 instead makes everything work and irqs from the GPIO controller can be configured for wakeup. Make it consistent by returning 0 (success) from irq_chip_set_wake_parent() when a parent chip has IRQCHIP_SKIP_SET_WAKE set. [ tglx: Massaged changelog ] Fixes: 08b55e2a ("genirq: Add irqchip_set_wake_parent") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: Lina Iyer <ilina@codeaurora.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190325181026.247796-1-swboyd@chromium.orgSigned-off-by:
-
Jason Yan authored
commit a89afe58 upstream. If the last bio returned is not dio->bio, the status of the bio will not assigned to dio->bio if it is error. This will cause the whole IO status wrong. ksoftirqd/21-117 [021] ..s. 4017.966090: 8,0 C N 4883648 [0] <idle>-0 [018] ..s. 4017.970888: 8,0 C WS 4924800 + 1024 [0] <idle>-0 [018] ..s. 4017.970909: 8,0 D WS 4935424 + 1024 [<idle>] <idle>-0 [018] ..s. 4017.970924: 8,0 D WS 4936448 + 321 [<idle>] ksoftirqd/21-117 [021] ..s. 4017.995033: 8,0 C R 4883648 + 336 [65475] ksoftirqd/21-117 [021] d.s. 4018.001988: myprobe1: (blkdev_bio_end_io+0x0/0x168) bi_status=7 ksoftirqd/21-117 [021] d.s. 4018.001992: myprobe: (aio_complete_rw+0x0/0x148) x0=0xffff802f2595ad80 res=0x12a000 res2=0x0 We always have to assign bio->bi_status to dio->bio.bi_status because we will only check dio->bio.bi_status when we return the whole IO to the upper layer. Fixes: 542ff7bf ("block: new direct I/O implementation") Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jérôme Glisse authored
commit a3761c3c upstream. When bio_add_pc_page() fails in bio_copy_user_iov() we should free the page we just allocated otherwise we are leaking it. Cc: linux-block@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Signed-off-by:
-
Anand Jain authored
commit 272e5326 upstream. The compression property resets to NULL, instead of the old value if we fail to set the new compression parameter. $ btrfs prop get /btrfs compression compression=lzo $ btrfs prop set /btrfs compression zli ERROR: failed to set compression for /btrfs: Invalid argument $ btrfs prop get /btrfs compression This is because the compression property ->validate() is successful for 'zli' as the strncmp() used the length passed from the userspace. Fix it by using the expected string length in strncmp(). Fixes: 63541927 ("Btrfs: add support for inode properties") Fixes: 5c1aab1d ("btrfs: Add zstd support") CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
