In dev_ethtool(), the eth command 'ethcmd' is firstly copied from the
use-space buffer 'useraddr' and checked to see whether it is
ETHTOOL_PERQUEUE. If yes, the sub-command 'sub_cmd' is further copied from
the user space. Otherwise, 'sub_cmd' is the same as 'ethcmd'. Next,
according to 'sub_cmd', a permission check is enforced through the function
ns_capable(). For example, the permission check is required if 'sub_cmd' is
ETHTOOL_SCOALESCE, but it is not necessary if 'sub_cmd' is
ETHTOOL_GCOALESCE, as suggested in the comment "Allow some commands to be
done by anyone". The following execution invokes different handlers
according to 'ethcmd'. Specifically, if 'ethcmd' is ETHTOOL_PERQUEUE,
ethtool_set_per_queue() is called. In ethtool_set_per_queue(), the kernel
object 'per_queue_opt' is copied again from the user-space buffer
'useraddr' and 'per_queue_opt.sub_command' is used to determine which
operation should be performed. Given that the buffer 'useraddr' is in the
user space, a malicious user can race to change the sub-command between the
two copies. In particular, the attacker can supply ETHTOOL_PERQUEUE and
ETHTOOL_GCOALESCE to bypass the permission check in dev_ethtool(). Then
before ethtool_set_per_queue() is called, the attacker changes
ETHTOOL_GCOALESCE to ETHTOOL_SCOALESCE. In this way, the attacker can
bypass the permission check and execute ETHTOOL_SCOALESCE.

This patch enforces a check in ethtool_set_per_queue() after the second
copy from 'useraddr'. If the sub-command is different from the one obtained
in the first copy in dev_ethtool(), an error code EINVAL will be returned.

Fixes: f38d138a ("net/ethtool: support set coalesce per queue")
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ethtool_get_rxnfc(), the eth command 'cmd' is compared against
'ETHTOOL_GRXFH' to see whether it is necessary to adjust the variable
'info_size'. Then the whole structure of 'info' is copied from the
user-space buffer 'useraddr' with 'info_size' bytes. In the following
execution, 'info' may be copied again from the buffer 'useraddr' depending
on the 'cmd' and the 'info.flow_type'. However, after these two copies,
there is no check between 'cmd' and 'info.cmd'. In fact, 'cmd' is also
copied from the buffer 'useraddr' in dev_ethtool(), which is the caller
function of ethtool_get_rxnfc(). Given that 'useraddr' is in the user
space, a malicious user can race to change the eth command in the buffer
between these copies. By doing so, the attacker can supply inconsistent
data and cause undefined behavior because in the following execution 'info'
will be passed to ops->get_rxnfc().

This patch adds a necessary check on 'info.cmd' and 'cmd' to confirm that
they are still same after the two copies in ethtool_get_rxnfc(). Otherwise,
an error code EINVAL will be returned.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Originally, we have an issue where r8169 MSI-X interrupt is broken after
S3 suspend/resume on RTL8106e of ASUS X441UAR.

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
	Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	I/O ports at e000 [size=256]
	Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
	Memory at e0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Endpoint, MSI 01
	Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
	Capabilities: [d0] Vital Product Data
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel
	Capabilities: [160] Device Serial Number 01-00-00-00-36-4c-e0-00
	Capabilities: [170] Latency Tolerance Reporting
	Kernel driver in use: r8169
	Kernel modules: r8169

We found the all of the values in PCI BAR=4 of the ethernet adapter
become 0xFF after system resumes.  That breaks the MSI-X interrupt.
Therefore, we can only fall back to MSI interrupt to fix the issue at
that time.

However, there is a commit which resolves the drivers getting nothing in
PCI BAR=4 after system resumes.  It is 04cb3ae895d7 "PCI: Reprogram
bridge prefetch registers on resume" by Daniel Drake.

After apply the patch, the ethernet adapter works fine before suspend
and after resume.  So, we can revert the workaround after the commit
"PCI: Reprogram bridge prefetch registers on resume" is merged into main
tree.

This patch reverts commit 7bb05b85
"r8169: don't use MSI-X on RTL8106e".

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201181
Fixes: 7bb05b85 ("r8169: don't use MSI-X on RTL8106e")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-10-14

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix xsk map update and delete operation to not call synchronize_net()
   but to piggy back on SOCK_RCU_FREE for sockets instead as we are not
   allowed to sleep under RCU, from Björn.

2) Do not change RLIMIT_MEMLOCK in reuseport_bpf selftest if the process
   already has unlimited RLIMIT_MEMLOCK, from Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Arnd writes:
  "ARM: SoC fixes for 4.19

   Two last minute bugfixes, both for NXP platforms:

   * The Layerscape 'qbman' infrastructure suffers from probe ordering
     bugs in some configurations, a two-patch series adds a hotfix for
     this. 4.20 will have a longer set of patches to rework it.

   * The old imx53-qsb board regressed in 4.19 after the addition
     of cpufreq support, adding a set of explicit operating points
     fixes this."

* tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  soc: fsl: qman_portals: defer probe after qman's probe
  soc: fsl: qbman: add APIs to retrieve the probing status
  ARM: dts: imx53-qsb: disable 1.2GHz OPP

Fix a leak of afs_server structs.  The routine that installs them in the
various lookup lists and trees gets a ref on leaving the function, whether
it added the server or a server already exists.  It shouldn't increment
the refcount if it added the server.

The effect of this that "rmmod kafs" will hang waiting for the leaked
server to become unused.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Just drop the "linux" part of the path, it was never correct.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 256ac037 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The file is GPL v2 or later.
Acked-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Access to the list of cells by /proc/net/afs/cells has a couple of
problems:

 (1) It should be checking against SEQ_START_TOKEN for the keying the
     header line.

 (2) It's only holding the RCU read lock, so it can't just walk over the
     list without following the proper RCU methods.

Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.

Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.

Fixes: 989782dc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Ulf writes:
   "MMC core:
    - Avoid fragile multiblock reads for the last sector in SPI mode
    WIFI/SDIO:
    - libertas: Fixup suspend sequence for the SDIO card"

* tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  libertas: call into generic suspend code before turning off power
  mmc: block: avoid multiblock reads for the last sector in SPI mode

Linus writes:
  "GPIO fix for the v4.19 series:
   - Fix up the interrupt parent for the irqdomains."

* tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Assign gpio_irq_chip::parents to non-stack pointer

Linus writes:
  "pin control fix for v4.19:

   A single pin control fix for v4.19:
   - Interrupt setup in the MCP23S08 driver."

* tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mcp23s08: fix irq and irqchip setup order

Boris writes:
  "mdt: fix for 4.19-rc8

   * Fix a stack overflow in lib/bch.c"

* tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd:
  lib/bch: fix possible stack overrun

Dave writes:
  "drm fixes for 4.19-rc8

   single nouveau runtime reference and mst change"

* tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()

Doug writes:
  "RDMA fixes:

   Final for-rc pull request for 4.19

   We only have one bug to submit this time around.  It fixes a DMA
   unmap issue where we unmapped the DMA address from the IOMMU before
   we did from the card, resulting in a DMAR error with IOMMU enabled,
   or possible crash without."

* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Unmap DMA addr from HCA before IOMMU

Dmitry writes:
  "Input updates for v4.19-rc7

   - we added a few scheduling points into various input interfaces to
     ensure that large writes will not cause RCU stalls
   - fixed configuring PS/2 keyboards as wakeup devices on newer
     platforms
   - added a new Xbox gamepad ID."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: uinput - add a schedule point in uinput_inject_events()
  Input: evdev - add a schedule point in evdev_write()
  Input: mousedev - add a schedule point in mousedev_write()
  Input: i8042 - enable keyboard wakeups by default when s2idle is used
  Input: xpad - add support for Xbox1 PDP Camo series gamepad

Stephen writes:
  "A couple of warning fixes:

  Two fixes from Peter Oberparleiter <oberpar@linux.ibm.com>:
    Commit 6b7dca40 ("tracing: Allow gcov profiling on only ftrace subsystem")
   uncovered linker problems when using gcov kernel profiling on some
   architectures. These problems were likely introduced earlier, and are
   possibly related to compiler changes."

* tag 'next-fixes-20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
  vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections
  vmlinux.lds.h: Fix incomplete .text.exit discards

The previous patch introduced very large kernel stack usage and a Makefile
change to hide the warning about it.

From what I can tell, a number of things went wrong here:

- The BCH_MAX_T constant was set to the maximum value for 'n',
  not the maximum for 't', which is much smaller.

- The stack usage is actually larger than the entire kernel stack
  on some architectures that can use 4KB stacks (m68k, sh, c6x), which
  leads to an immediate overrun.

- The justification in the patch description claimed that nothing
  changed, however that is not the case even without the two points above:
  the configuration is machine specific, and most boards  never use the
  maximum BCH_ECC_WORDS() length but instead have something much smaller.
  That maximum would only apply to machines that use both the maximum
  block size and the maximum ECC strength.

The largest value for 't' that I could find is '32', which in turn leads
to a 60 byte array instead of 2048 bytes. Making it '64' for future
extension seems also worthwhile, with 120 bytes for the array. Anything
larger won't fit into the OOB area on NAND flash.

With that changed, the warning can be enabled again.

Only linux-4.19+ contains the breakage, so this is only needed
as a stable backport if it does not make it into the release.

Fixes: 02361bc7 ("lib/bch: Remove VLA usage")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

David writes:
  "Networking

   1) RXRPC receive path fixes from David Howells.

   2) Re-export __skb_recv_udp(), from Jiri Kosina.

   3) Fix refcounting in u32 classificer, from Al Viro.

   4) Userspace netlink ABI fixes from Eugene Syromiatnikov.

   5) Don't double iounmap on rmmod in ena driver, from Arthur
      Kiyanovski.

   6) Fix devlink string attribute handling, we must pull a copy into a
      kernel buffer if the lifetime extends past the netlink request.
      From Moshe Shemesh.

   7) Fix hangs in RDS, from Ka-Cheong Poon.

   8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.

   9) Clear RX irq correctly in socionext, from Ilias Apalodimas.

   10) bcm_sf2 fixes from Florian Fainelli."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net: dsa: bcm_sf2: Call setup during switch resume
  net: dsa: bcm_sf2: Fix unbind ordering
  net: phy: sfp: remove sfp_mutex's definition
  r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
  net: socionext: clear rx irq correctly
  net/mlx4_core: Fix warnings during boot on driverinit param set failures
  tipc: eliminate possible recursive locking detected by LOCKDEP
  selftests: udpgso_bench.sh explicitly requires bash
  selftests: rtnetlink.sh explicitly requires bash.
  qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
  tipc: queue socket protocol error messages into socket receive buffer
  tipc: set link tolerance correctly in broadcast link
  net: ipv4: don't let PMTU updates increase route MTU
  net: ipv4: update fnhe_pmtu when first hop's MTU changes
  net/ipv6: stop leaking percpu memory in fib6 info
  rds: RDS (tcp) hangs on sendto() to unresponding address
  net: make skb_partial_csum_set() more robust against overflows
  devlink: Add helper function for safely copy string param
  devlink: Fix param cmode driverinit for string type
  devlink: Fix param set handling for string type
  ...

Florian Fainelli says:

====================
net: dsa: bcm_sf2: Couple of fixes

Here are two fixes for the bcm_sf2 driver that were found during
testing unbind and analysing another issue during system
suspend/resume.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no reason to open code what the switch setup function does, in
fact, because we just issued a switch reset, we would make all the
register get their default values, including for instance, having unused
port be enabled again and wasting power and leading to an inappropriate
switch core clock being selected.

Fixes: 8cfa9498 ("net: dsa: bcm_sf2: add suspend/resume callbacks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The order in which we release resources is unfortunately leading to bus
errors while dismantling the port. This is because we set
priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now
permissible to clock gate the switch. Later on, when dsa_slave_destroy()
comes in from dsa_unregister_switch() and calls
dsa_switch_ops::port_disable, we perform the same dismantling again, and
this time we hit registers that are clock gated.

Make sure that dsa_unregister_switch() is the first thing that happens,
which takes care of releasing all user visible resources, then proceed
with clock gating hardware. We still need to set priv->wol_ports_mask to
0 to make sure that an enabled port properly gets disabled in case it
was previously used as part of Wake-on-LAN.

Fixes: d9338023 ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enabling both CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y and
CONFIG_GCOV_PROFILE_ALL=y results in linker warnings:

  warning: orphan section `.data..LPBX1' being placed in
  section `.data..LPBX1'.

LD_DEAD_CODE_DATA_ELIMINATION adds compiler flag -fdata-sections. This
option causes GCC to create separate data sections for data objects,
including those generated by GCC internally for gcov profiling. The
names of these objects start with a dot (.LPBX0, .LPBX1), resulting in
section names starting with 'data..'.

As section names starting with 'data..' are used for specific purposes
in the Linux kernel, the linker script does not automatically include
them in the output data section, resulting in the "orphan section"
linker warnings.

Fix this by specifically including sections named "data..LPBX*" in the
data section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Enabling CONFIG_GCOV_PROFILE_ALL=y causes linker errors on ARM:

  `.text.exit' referenced in section `.ARM.exidx.text.exit':
  defined in discarded section `.text.exit'

  `.text.exit' referenced in section `.fini_array.00100':
  defined in discarded section `.text.exit'

And related errors on NDS32:

  `.text.exit' referenced in section `.dtors.65435':
  defined in discarded section `.text.exit'

The gcov compiler flags cause certain compiler versions to generate
additional destructor-related sections that are not yet handled by the
linker script, resulting in references between discarded and
non-discarded sections.

Since destructors are not used in the Linux kernel, fix this by
discarding these additional sections.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Greentime Hu <green.hu@gmail.com>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

The sfp_mutex variable is defined but never used in this file. Not even
in the commit that introduced that variable.

Remove sfp_mutex, it has no purpose.

Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

It has been reported that since
commit 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from
suspend.
The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig
register.
We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F
chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36
and RTL_GIGA_MAC_VER_38.

Curiously, the NIC seems to work fine after a system boot without having
this bit set as long as the system isn't suspended and resumed.

Fixes: 05212ba8 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
Reported-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 63ae7949 ("net: socionext: Use descriptor info instead of MMIO reads on Rx")
removed constant mmio reads from the driver and started using a descriptor
field to check if packet should be processed.
This lead the napi rx handler being constantly called while no packets
needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read
to clear the irq correcty after processing packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

During boot, mlx4_core sets the driverinit configuration parameters and
updates the devlink module on the initial values calling
devlink_param_driverinit_value_set().
If devlink_param_driverinit_value_set() returns an error mlx4_core
reports kernel module warning.

This caused false alarm during boot in case kernel was compiled with
CONFIG_NET_DEVLINK off.
Fix by removing warning reported in case
devlink_param_driverinit_value_set() fails.

This actually makes the function mlx4_devlink_set_init_value()
redundant to using directly devlink_param_driverinit_value_set() and so
removed.

It fixes the following kernel trace:

 mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95)
 mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95)
 mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95)
 mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95)
 mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95)

Fixes: bd1b51dc ("mlx4: Add mlx4 initial parameters table and register it")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tejun writes:
  "cgroup fixes for v4.19-rc7

   One cgroup2 threaded mode fix for v4.19-rc7.  While threaded mode
   isn't used widely (yet) and the bug requires somewhat convoluted
   sequence of operations, it causes a userland visible malfunction -
   EINVAL on a valid attempt to enable threaded mode.  This pull request
   contains the fix"

* 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Fix dom_cgrp propagation when enabling threaded mode

When booting kernel with LOCKDEP option, below warning info was found:

WARNING: possible recursive locking detected
4.19.0-rc7+ #14 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850

but task is already holding lock:
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&list->lock)->rlock#4);
  lock(&(&list->lock)->rlock#4);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

2 locks held by swapper/0/1:
 #0: 00000000f7539d34 (pernet_ops_rwsem){+.+.}, at:
register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051
 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
spin_lock_bh include/linux/spinlock.h:334 [inline]
 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849

stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1af/0x295 lib/dump_stack.c:113
 print_deadlock_bug kernel/locking/lockdep.c:1759 [inline]
 check_deadlock kernel/locking/lockdep.c:1803 [inline]
 validate_chain kernel/locking/lockdep.c:2399 [inline]
 __lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411
 lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900
 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
 _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
 spin_lock_bh include/linux/spinlock.h:334 [inline]
 tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850
 tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526
 tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521
 tipc_init_net+0x472/0x610 net/tipc/core.c:82
 ops_init+0xf7/0x520 net/core/net_namespace.c:129
 __register_pernet_operations net/core/net_namespace.c:940 [inline]
 register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011
 register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052
 tipc_init+0x83/0x104 net/tipc/core.c:140
 do_one_initcall+0x109/0x70a init/main.c:885
 do_initcall_level init/main.c:953 [inline]
 do_initcalls init/main.c:961 [inline]
 do_basic_setup init/main.c:979 [inline]
 kernel_init_freeable+0x4bd/0x57f init/main.c:1144
 kernel_init+0x13/0x180 init/main.c:1063
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413

The reason why the noise above was complained by LOCKDEP is because we
nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset
function. In fact it's unnecessary to move skb buffer from l->wakeupq
queue to l->inputq queue while holding the two locks at the same time.
Instead, we can move skb buffers in l->wakeupq queue to a temporary
list first and then move the buffers of the temporary list to l->inputq
queue, which is also safe for us.

Fixes: 3f32d0be ("tipc: lock wakeup & inputq at tipc_link_reset()")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Masahiro writes:
  "Kbuild fixes for v4.19 (2nd)
   - Fix warnings from recordmcount.pl when building with Clang
   - Allow Clang to use GNU toolchains correctly
   - Disable CONFIG_SAMPLES for UML to avoid build error"

* tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  samples: disable CONFIG_SAMPLES for UML
  kbuild: allow to use GCC toolchain not in Clang search path
  ftrace: Build with CPPFLAGS to get -Qunused-arguments

Paolo Abeni says:

====================
net: explicitly requires bash when needed.

Some test scripts require bash-only features but use the default shell.
This may cause random failures if the default shell is not bash.
Instead of doing a potentially complex rewrite of such scripts, these patches
require the bash interpreter, where needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The udpgso_bench.sh script requires several bash-only features. This
may cause random failures if the default shell is not bash.
Address the above explicitly requiring bash as the script interpreter

Fixes: 3a687bef ("selftests: udp gso benchmark")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the script rtnetlink.sh requires a bash-only features (sleep with sub-second
precision). This may cause random test failure if the default shell is not
bash.
Address the above explicitly requiring bash as the script interpreter.

Fixes: 33b01b7b ("selftests: add rtnetlink test script")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kees writes:
  "Fix open-coded multiplication arguments to allocators

   - Fixes several new open-coded multiplications added in the 4.19
     merge window."

* tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Replace more open-coded allocation size multiplications

Ingo writes:
  "x86 fixes

   An intel_rdt memory access fix and a VLA fix in pgd_alloc()."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Avoid VLA in pgd_alloc()
  x86/intel_rdt: Fix out-of-bounds memory access in CBM tests

Ingo writes:
  "scheduler fix:

   Cleanup of dead code left over from the recent sched/numa fixes."

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm, sched/numa: Remove remaining traces of NUMA rate-limiting

Ingo, a man of few words, writes:
  "perf fixes:

   misc perf tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf record: Use unmapped IP for inline callchain cursors
  perf python: Use -Wno-redundant-decls to build with PYTHON=python3
  perf report: Don't try to map ip to invalid map
  perf script python: Fix export-to-sqlite.py sample columns
  perf script python: Fix export-to-postgresql.py occasional failure

The XSKMAP update and delete functions called synchronize_net(), which
can sleep. It is not allowed to sleep during an RCU read section.

Instead we need to make sure that the sock sk_destruct (xsk_destruct)
function is asynchronously called after an RCU grace period. Setting
the SOCK_RCU_FREE flag for XDP sockets takes care of this.

Fixes: fbfc504a ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Added support for Gemalto's Cinterion ALASxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>