- 12 Mar, 2021 5 commits
-
-
Pavel Begunkov authored
IORING_OP_ASYNC_CANCEL tries io-wq cancellation only for current task. If it fails go over tctx_list and try it out for every single tctx. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
1) The first problem is io_uring_cancel_sqpoll() -> io_uring_cancel_task_requests() basically doing park(); park(); and so hanging. 2) Another one is more subtle, when the master task is doing cancellations, but SQPOLL task submits in-between the end of the cancellation but before finish() requests taking a ref to the ctx, and so eternally locking it up. 3) Yet another is a dying SQPOLL task doing io_uring_cancel_sqpoll() and same io_uring_cancel_sqpoll() from the owner task, they race for tctx->wait events. And there probably more of them. Instead do SQPOLL cancellations from within SQPOLL task context via task_work, see io_sqpoll_cancel_sync(). With that we don't need temporal park()/unpark() during cancellation, which is ugly, subtle and anyway doesn't allow to do io_run_task_work() properly. io_uring_cancel_sqpoll() is called only from SQPOLL task context and under sqd locking, so all parking is removed from there. And so, io_sq_thread_[un]park() and io_sq_thread_stop() are not used now by SQPOLL task, and that spare us from some headache. Also remove ctx->sqd_list early to avoid 2). And kill tctx->sqpoll, which is not used anymore. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
SQPOLL thread to which we're trying to attach may be going away, it's not nice but a more serious problem is if io_sq_offload_create() sees sqd->thread==NULL, and tries to init it with a new thread. There are tons of ways it can be exploited or fail. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
We always do complete(&sqd->startup) almost right after sqd->thread creation, either in the success path or in io_sq_thread_finish(). It's specifically created not started for us to be able to set some stuff like sqd->thread and io_uring_alloc_task_context() before following right after wake_up_new_task(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
As io_uring_cancel_files() and others let SQO to run between io_uring_try_cancel_requests(), SQO may generate new deferred requests, so it's safer to try to cancel them in it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 11 Mar, 2021 2 commits
-
-
Jens Axboe authored
We bypass IOPOLL completion polling (and reaping) for the SQPOLL thread, but if it's the thread itself invoking cancelations, then we still need to perform it or no one will. Fixes: 9936c7c2 ("io_uring: deduplicate core cancellations sequence") Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
Earlier kernels had SQPOLL threads that could share across anything, as we grabbed the context we needed on a per-ring basis. This is no longer the case, so only allow attaching directly if we're in the same thread group. That is the common use case. For non-group tasks, just setup a new context and thread as we would've done if sharing wasn't set. This isn't 100% ideal in terms of CPU utilization for the forked and share case, but hopefully that isn't much of a concern. If it is, there are plans in motion for how to improve that. Most importantly, we want to avoid app side regressions where sharing worked before and now doesn't. With this patch, functionality is equivalent to previous kernels that supported IORING_SETUP_ATTACH_WQ with SQPOLL. Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 10 Mar, 2021 15 commits
-
-
Pavel Begunkov authored
We use ->ctx_new_list to notify sqo about new ctx pending, then sqo should stop and splice it to its sqd->ctx_list, paired with ->sq_thread_comp. The last one is broken because nobody reinitialises it, and trying to fix it would only add more complexity and bugs. And the first isn't really needed as is done under park(), that protects from races well. Add ctx into sqd->ctx_list directly (under park()), it's much simpler and allows to kill both, ctx_new_list and sq_thread_comp. note: apparently there is no real problem at the moment, because sq_thread_comp is used only by io_sq_thread_finish() followed by parking, where list_del(&ctx->sqd_list) removes it well regardless whether it's in the new or the active list. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
We have to set ctx->sq_thread_idle before adding a ring to an SQ task, otherwise sqd races for seeing zero and accounting it as such. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
The io-wq threads were already marked as no-freeze, but the manager was not. On resume, we perpetually have signal_pending() being true, and hence the manager will loop and spin 100% of the time. Just mark the tasks created by create_io_thread() as PF_NOFREEZE by default, and remove any knowledge of it in io-wq and io_uring. Reported-by: Kevin Locke <kevin@kevinlocke.name> Tested-by: Kevin Locke <kevin@kevinlocke.name> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
We have a tiny race where io_put_sq_data() calls io_sq_thead_stop() and finds the thread gone, but the thread has indeed not fully exited or called complete() yet. Close it up by always having io_sq_thread_stop() wait on completion of the exit event. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Yang Li authored
Fix the following coccicheck warning: ./fs/io_uring.c:8984:5-8: Unneeded variable: "ret". Return "0" on line 8998 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1615271441-33649-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
If we hit an error path in the function, make sure that the io_kiocb is fully initialized at that point so that freeing the request always sees a valid state. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
yangerkun authored
do_work such as io_wq_submit_work that cancel the work may leave a ref of req as 1 if we have links. Fix it by call io_run_cancel. Fixes: 4fb6ac32 ("io-wq: improve manager/worker handling over exec") Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20210309030410.3294078-1-yangerkun@huawei.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
Calling io_queue_next() after spin_unlock in io_req_complete_post() races with the other side extracting and reusing this request. Hand coded parts of io_req_find_next() considering that io_disarm_next() and io_req_task_queue() have (and safe) to be called with completion_lock held. It already does io_commit_cqring() and io_cqring_ev_posted(), so just reuse it for post io_disarm_next(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/5672a62f3150ee7c55849f40c0037655c4f2840f.1615250156.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
A preparation patch placing all preparations before extracting a next request into a separate helper io_disarm_next(). Also, don't spuriously do ev_posted in a rare case where REQ_F_FAIL_LINK is set but there are no requests linked (i.e. after cancelling a linked timeout or setting IOSQE_IO_LINK on a last request of a submission batch). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/44ecff68d6b47e1c4e6b891bdde1ddc08cfc3590.1615250156.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
Don't set IO_SQ_THREAD_SHOULD_STOP when io_sq_offload_create() has failed on io_uring_alloc_task_context() but leave everything to io_sq_thread_finish(), because currently io_sq_thread_finish() hangs on trying to park it. That's great it stalls there, because otherwise the following io_sq_thread_stop() would be skipped on IO_SQ_THREAD_SHOULD_STOP check and the sqo would race for sqd with freeing ctx. A simple error injection gives something like this. [ 245.463955] INFO: task sqpoll-test-hang:523 blocked for more than 122 seconds. [ 245.463983] Call Trace: [ 245.463990] __schedule+0x36b/0x950 [ 245.464005] schedule+0x68/0xe0 [ 245.464013] schedule_timeout+0x209/0x2a0 [ 245.464032] wait_for_completion+0x8b/0xf0 [ 245.464043] io_sq_thread_finish+0x44/0x1a0 [ 245.464049] io_uring_setup+0x9ea/0xc80 [ 245.464058] __x64_sys_io_uring_setup+0x16/0x20 [ 245.464064] do_syscall_64+0x38/0x50 [ 245.464073] entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
Previous patches killed the last user of this, now it's just a dead member in the struct. Get rid of it. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Matthew Wilcox (Oracle) authored
You can't call idr_remove() from within a idr_for_each() callback, but you can call xa_erase() from an xa_for_each() loop, so switch the entire personality_idr from the IDR to the XArray. This manifests as a use-after-free as idr_for_each() attempts to walk the rest of the node after removing the last entry from it. Fixes: 071698e1 ("io_uring: allow registering credentials") Cc: stable@vger.kernel.org # 5.6+ Reported-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> [Pavel: rebased (creds load was moved into io_init_req())] Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/7ccff36e1375f2b0ebf73d957f037b43becc0dde.1615212806.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
There are enough of problems with IORING_SETUP_R_DISABLED, including the burden of checking and kicking off the SQO task all over the codebase -- for exit/cancel/etc. Rework it, always start the thread but don't do submit unless the flag is gone, that's much easier. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
io-wq now is per-task, so cancellations now should match against request's ctx. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
We keep running into weird dependency issues between the sqd lock and the parking state. Disentangle the SQPOLL thread from the last bits of the kthread parking inheritance, and just replace the parking state, and two associated locks, with a single rw mutex. The SQPOLL thread keeps the mutex for read all the time, except if someone has marked us needing to park. Then we drop/re-acquire and try again. This greatly simplifies the parking state machine (by just getting rid of it), and makes it a lot more obvious how it works - if you need to modify the ctx list, then you simply park the thread which will grab the lock for writing. Fold in fix from Hillf Danton on not setting STOP on a fatal signal. Fixes: e54945ae ("io_uring: SQPOLL stop error handling fixes") Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 07 Mar, 2021 10 commits
-
-
Stefan Metzmacher authored
This brings the behavior back in line with what 5.11 and earlier did, and this is no longer needed with the improved handling of creds not needing to do unshare(). Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Stefan Metzmacher authored
With IORING_SETUP_ATTACH_WQ we should let __io_sq_thread() use the initial creds from each ctx. Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
Add a simple warning making sure that nobody tries to create a new manager while we're under IO_WQ_BIT_EXIT. That can potentially happen due to racy work submission after final put. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
io_ring_exit_work() have to cancel all requests, including those staying in io-wq, however it tries only cancellation of current tctx, which is NULL. If we've got task==NULL, use the ctx-to-tctx map to go over all tctx/io-wq and try cancellations on them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
We use system_unbound_wq to run io_ring_exit_work(), so it's hard to monitor whether removal hang or not. Add WARN_ONCE to catch hangs. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
We don't use task file notes anymore, and no need left in indexing task->io_uring->xa by file, and replace it with ctx. It's better design-wise, especially since we keep a dangling file, and so have to keep an eye on not dereferencing it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
With ->flush() gone we're now leaving all uring file notes until the task dies/execs, so the ctx will not be freed until all tasks that have ever submit a request die. It was nicer with flush but not much, we could have locked as described ctx in many cases. Now we guarantee that ctx outlives all tctx in a sense that io_ring_exit_work() waits for all tctxs to drop their corresponding enties in ->xa, and ctx won't go away until then. Hence, additional io_uring file reference (a.k.a. task file notes) are not needed anymore. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
Another preparation patch. When full quiesce is done on ctx exit, use task_work infra to remove corresponding to the ctx io_uring->xa entries. For that we use the back tctx map. Also use ->in_idle to prevent removing it while we traversing ->xa on cancellation, just ignore it. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
For each pair tcxt-ctx create an object and chain it into ctx, so we have a way to traverse all tctx that are using current ctx. Preparation patch, will be used later. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
Rework io_uring_del_task_file(), so it accepts an index to delete, and it's not necessarily have to be in the ->xa. Infer file from xa_erase() to maintain a single origin of truth. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 06 Mar, 2021 6 commits
-
-
Jens Axboe authored
If we go async with a request, grab the creds that the task currently has assigned and make sure that the async side switches to them. This is handled in the same way that we do for registered personalities. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
Ran into a use-after-free on the main io-wq struct, wq. It has a worker ref and completion event, but the manager itself isn't holding a reference. This can lead to a race where the manager thinks there are no workers and exits, but a worker is being added. That leads to the following trace: BUG: KASAN: use-after-free in io_wqe_worker+0x4c0/0x5e0 Read of size 8 at addr ffff888108baa8a0 by task iou-wrk-3080422/3080425 CPU: 5 PID: 3080425 Comm: iou-wrk-3080422 Not tainted 5.12.0-rc1+ #110 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO 10G (MS-7C60), BIOS 1.60 05/13/2020 Call Trace: dump_stack+0x90/0xbe print_address_description.constprop.0+0x67/0x28d ? io_wqe_worker+0x4c0/0x5e0 kasan_report.cold+0x7b/0xd4 ? io_wqe_worker+0x4c0/0x5e0 __asan_load8+0x6d/0xa0 io_wqe_worker+0x4c0/0x5e0 ? io_worker_handle_work+0xc00/0xc00 ? recalc_sigpending+0xe5/0x120 ? io_worker_handle_work+0xc00/0xc00 ? io_worker_handle_work+0xc00/0xc00 ret_from_fork+0x1f/0x30 Allocated by task 3080422: kasan_save_stack+0x23/0x60 __kasan_kmalloc+0x80/0xa0 kmem_cache_alloc_node_trace+0xa0/0x480 io_wq_create+0x3b5/0x600 io_uring_alloc_task_context+0x13c/0x380 io_uring_add_task_file+0x109/0x140 __x64_sys_io_uring_enter+0x45f/0x660 do_syscall_64+0x32/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 3080422: kasan_save_stack+0x23/0x60 kasan_set_track+0x20/0x40 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xe8/0x120 kfree+0xa8/0x400 io_wq_put+0x14a/0x220 io_wq_put_and_exit+0x9a/0xc0 io_uring_clean_tctx+0x101/0x140 __io_uring_files_cancel+0x36e/0x3c0 do_exit+0x169/0x1340 __x64_sys_exit+0x34/0x40 do_syscall_64+0x32/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Have the manager itself hold a reference, and now both drop points drop and complete if we hit zero, and the manager can unconditionally do a wait_for_completion() instead of having a race between reading the ref count and waiting if it was non-zero. Fixes: fb3a1f6c ("io-wq: have manager wait for all workers to exit") Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
- 05 Mar, 2021 2 commits
-
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy) - rsxx missing -EFAULT on copy_to_user() failure (Dan) - rsxx remove unused linux.h include (Tian) - kill unused RQF_SORTED (Jean) - updated outdated BFQ comments (Joseph) - revert work-around commit for bd_size_lock, since we removed the offending user in this merge window (Damien) * tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST. rsxx: Return -EFAULT if copy_to_user() fails block/bfq: update comments and default value in docs for fifo_expire rsxx: remove unused including <linux/version.h> block: Drop leftover references to RQF_SORTED block: revert "block: fix bd_size_lock use"
-