- 13 Aug, 2020 2 commits
-
-
Florian Westphal authored
syzbot found a memory leak in nf_tables_addchain() because the chain object is not free'd correctly on error. Fixes: d0e2c7de ("netfilter: nf_tables: add NFT_CHAIN_BINDING") Reported-by: syzbot+c99868fde67014f7e9f5@syzkaller.appspotmail.com Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core. The current use of the netfilter ipv6 stub indirections causes a module dependency between ipv6 and nf_defrag_ipv6. This prevents nf_defrag_ipv6 module from being removed because ipv6 can't be unloaded. Remove the indirection and always use a direct call. This creates a depency from nf_conntrack_bridge to nf_defrag_ipv6 instead: modinfo nf_conntrack depends: nf_conntrack,nf_defrag_ipv6,bridge .. and nf_conntrack already depends on nf_defrag_ipv6 anyway. Signed-off-by:
-
- 10 Aug, 2020 2 commits
-
-
Florian Westphal authored
WARNING: CPU: 1 PID: 16059 at lib/refcount.c:31 refcount_warn_saturate+0xdf/0xf [..] __nft_mt_tg_destroy+0x42/0x50 [nft_compat] nft_target_destroy+0x63/0x80 [nft_compat] nf_tables_expr_destroy+0x1b/0x30 [nf_tables] nf_tables_rule_destroy+0x3a/0x70 [nf_tables] nf_tables_exit_net+0x186/0x3d0 [nf_tables] Happens when a compat expr is destoyed from abort path. There is no functional impact; after this work queue is flushed unconditionally if its pending. This removes the waitcount optimization. Test of repeated iptables-restore of a ~60k kubernetes ruleset doesn't indicate a slowdown. In case the counter is needed after all for some workloads we can revert this and increment the refcount for the != NFT_PREPARE_TRANS case to avoid the increment/decrement imbalance. While at it, also flush for match case, this was an oversight in the original patch. Fixes: ffe8923f ("netfilter: nft_compat: make sure xtables destructors have run") Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Stephen Suryaputra authored
On big-endian machine, the returned register data when the exthdr is present is not being compared correctly because little-endian is assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval() and nft_cmp_fast_init(), calls cpu_to_le32(). The following dump also shows that little endian is assumed: $ nft --debug=netlink add rule ip recordroute forward ip option rr exists counter ip [ exthdr load ipv4 1b @ 7 + 0 present => reg 1 ] [ cmp eq reg 1 0x01000000 ] [ counter pkts 0 bytes 0 ] Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when RR option exists in the packet shows that the comparison fails because the assumption: nft_cmp_fast_init:189 priv->sreg=4 desc.len=8 mask=0xff000000 data.data[0]=0x10003e0 nft_cmp_fast_eval:57 regs->data[priv->sreg=4]=0x1 mask=0xff000000 priv->data=0x1000000 v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the warnings reported by kernel test robot. Fixes: dbb5281a ("netfilter: nf_tables: add support for matching IPv4 options") Fixes: c078ca3b ("netfilter: nft_exthdr: Add support for existence check") Signed-off-by:Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
-
- 08 Aug, 2020 12 commits
-
-
Miaohe Lin authored
Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
Use helper function ip_is_fragment() to check ip fragment. Signed-off-by:
-
Miaohe Lin authored
The out_fs jump label has nothing to do but goto out. Signed-off-by:
-
Miaohe Lin authored
We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly. Fixes: 00e188ef ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light") Signed-off-by:
-
Miaohe Lin authored
Use helper function fdput() to fput() the file iff FDPUT_FPUT is set. Signed-off-by:
-
Johan Hovold authored
A recent commit introduced a late error path in phy_device_create() which fails to release the device name allocated by dev_set_name(). Fixes: 13d0ab67 ("net: phy: check return code when requesting PHY driver module") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Rouven Czerwinski authored
Trying to use ktls on a system with 32-bit userspace and 64-bit kernel results in a EOPNOTSUPP message during sendmsg: setsockopt(3, SOL_TLS, TLS_TX, …, 40) = 0 sendmsg(3, …, msg_flags=0}, 0) = -1 EOPNOTSUPP (Operation not supported) The tls_sw implementation does strict flag checking and does not allow the MSG_CMSG_COMPAT flag, which is set if the message comes in through the compat syscall. This patch adds MSG_CMSG_COMPAT to the flag check to allow the usage of the TLS SW implementation on systems using the compat syscall path. Note that the same check is present in the sendmsg path for the TLS device implementation, however the flag hasn't been added there for lack of testing hardware. Signed-off-by:
Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-08-08 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 2 day(s) which contain a total of 24 files changed, 216 insertions(+), 135 deletions(-). The main changes are: 1) Fix UAPI for BPF map iterator before it gets frozen to allow for more extensions/customization in future, from Yonghong Song. 2) Fix selftests build to undo verbose build output, from Andrii Nakryiko. 3) Fix inlining compilation error on bpf_do_trace_printk() due to variable argument lists, from Stanislav Fomichev. 4) Fix an uninitialized pointer warning at btf__parse_raw() in libbpf, from Daniel T. Lee. 5) Fix several compilation warnings in selftests with regards to ignoring return value, from Jianlin Lv. 6) Fix interruptions by switching off timeout for BPF tests, from Jiri Benc. ==================== Signed-off-by: -
Paolo Abeni authored
With commit b93df08c ("mptcp: explicitly track the fully established status"), the status of unaccepted mptcp closed in mptcp_sock_destruct() changes from TCP_SYN_RECV to TCP_ESTABLISHED. As a result mptcp_sock_destruct() does not perform the proper cleanup and inet_sock_destruct() will later emit a warn. Address the issue updating the condition tested in mptcp_sock_destruct(). Also update the related comment. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/66Reported-and-tested-by:
Christoph Paasch <cpaasch@apple.com> Fixes: b93df08c ("mptcp: explicitly track the fully established status") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
During diag self-tests we introduce long wait in the mptcp test program to give the script enough time to access the sockets dump. Such wait is introduced after shutting down one sockets end. Since commit 43b54c6e ("mptcp: Use full MPTCP-level disconnect state machine") if both sides shutdown the socket is correctly transitioned into CLOSED status. As a side effect some sockets are not dumped via the diag interface, because the socket state (CLOSED) does not match the default filter, and this cause self-tests instability. Address the issue moving the above mentioned wait before shutting down the socket. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/68 Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Tested-and-acked-by:
-
Paolo Abeni authored
Since commit df62f2ec ("selftests/mptcp: add diag interface tests") the MPTCP selftests relies on the MPTCP diag interface which is enabled by a specific kconfig knob: be sure to include it. Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Signed-off-by:
-
Thierry Reding authored
Query the USB device's device tree node when looking for a MAC address. The struct device embedded into the struct net_device does not have a device tree node attached at all. The reason why this went unnoticed is because the system where this was tested was one of the few development units that had its OTP programmed, as opposed to production systems where the MAC address is stored in a separate EEPROM and is passed via device tree by the firmware. Reported-by:
EJ Hsu <ejh@nvidia.com> Fixes: acb6d377 ("r8152: Use MAC address from device tree if available") Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
- 07 Aug, 2020 4 commits
-
-
Randy Dunlap authored
Drop repeated words in kernel/bpf/: {has, the} Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200807033141.10437-1-rdunlap@infradead.org
-
Andrii Nakryiko authored
99aacebe ("selftests: do not use .ONESHELL") removed .ONESHELL, which changes how Makefile "silences" multi-command target recipes. selftests/bpf's Makefile relied (a somewhat unknowingly) on .ONESHELL behavior of silencing all commands within the recipe if the first command contains @ symbol. Removing .ONESHELL exposed this hack. This patch fixes the issue by explicitly silencing each command with $(Q). Also explicitly define fallback rule for building *.o from *.c, instead of relying on non-silent inherited rule. This was causing a non-silent output for bench.o object file. Fixes: 92f7440e ("selftests/bpf: More succinct Makefile output") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
-
Alan Maguire authored
The BPF helper bpf_trace_printk() no longer uses trace_printk(); it is now triggers a dedicated trace event. Hence the described warning is no longer present, so remove the discussion of it as it may confuse people. Fixes: ac5a72ea ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
-
Xie He authored
1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Changed to use needed_headroom instead of hard_header_len to request necessary headroom to be allocated In net/packet/af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and assumes the user to provide the appropriate link layer header. So according to the logic of af_packet.c, dev->hard_header_len should be the length of the header that would be created by dev->header_ops->create. However, this driver doesn't provide dev->header_ops, so logically dev->hard_header_len should be 0. So we should use dev->needed_headroom instead of dev->hard_header_len to request necessary headroom to be allocated. This change fixes kernel panic when this driver is used with AF_PACKET SOCK_RAW sockets. Call stack when panic: [ 168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20 put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0 dev:veth0 ... [ 168.399255] Call Trace: [ 168.399259] skb_push.cold+0x14/0x24 [ 168.399262] eth_header+0x2b/0xc0 [ 168.399267] lapbeth_data_transmit+0x9a/0xb0 [lapbether] [ 168.399275] lapb_data_transmit+0x22/0x2c [lapb] [ 168.399277] lapb_transmit_buffer+0x71/0xb0 [lapb] [ 168.399279] lapb_kick+0xe3/0x1c0 [lapb] [ 168.399281] lapb_data_request+0x76/0xc0 [lapb] [ 168.399283] lapbeth_xmit+0x56/0x90 [lapbether] [ 168.399286] dev_hard_start_xmit+0x91/0x1f0 [ 168.399289] ? irq_init_percpu_irqstack+0xc0/0x100 [ 168.399291] __dev_queue_xmit+0x721/0x8e0 [ 168.399295] ? packet_parse_headers.isra.0+0xd2/0x110 [ 168.399297] dev_queue_xmit+0x10/0x20 [ 168.399298] packet_sendmsg+0xbf0/0x19b0 ...... Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 06 Aug, 2020 20 commits
-
-
Jianlin Lv authored
Clang compiler version: 12.0.0 The following warning appears during the selftests/bpf compilation: prog_tests/send_signal.c:51:3: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result] 51 | write(pipe_c2p[1], buf, 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ prog_tests/send_signal.c:54:3: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result] 54 | read(pipe_p2c[0], buf, 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~ ...... prog_tests/stacktrace_build_id_nmi.c:13:2: warning: ignoring return value of ‘fscanf’,declared with attribute warn_unused_result [-Wunused-resul] 13 | fscanf(f, "%llu", &sample_freq); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ test_tcpnotify_user.c:133:2: warning:ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result] 133 | system(test_script); | ^~~~~~~~~~~~~~~~~~~ test_tcpnotify_user.c:138:2: warning:ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result] 138 | system(test_script); | ^~~~~~~~~~~~~~~~~~~ test_tcpnotify_user.c:143:2: warning:ignoring return value of ‘system’, declared with attribute warn_unused_result [-Wunused-result] 143 | system(test_script); | ^~~~~~~~~~~~~~~~~~~ Add code that fix compilation warning about ignoring return value and handles any errors; Check return value of library`s API make the code more secure. Signed-off-by:Jianlin Lv <Jianlin.Lv@arm.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200806104224.95306-1-Jianlin.Lv@arm.com
-
Jiri Benc authored
Several bpf tests are interrupted by the default timeout of 45 seconds added by commit 852c8cbf ("selftests/kselftest/runner.sh: Add 45 second timeout per test"). In my case it was test_progs, test_tunnel.sh, test_lwt_ip_encap.sh and test_xdping.sh. There's not much value in having a timeout for bpf tests, switch it off. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Stanislav Fomichev authored
I get the following error during compilation on my side: kernel/trace/bpf_trace.c: In function 'bpf_do_trace_printk': kernel/trace/bpf_trace.c:386:34: error: function 'bpf_do_trace_printk' can never be inlined because it uses variable argument lists static inline __printf(1, 0) int bpf_do_trace_printk(const char *fmt, ...) ^ Fixes: ac5a72ea ("bpf: Use dedicated bpf_trace_printk event instead of trace_printk()") Signed-off-by:Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Stanislav Fomichev authored
int sets_patch(struct object *obj) doesn't have a 'return 0' at the end. Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by:
-
Daniel T. Lee authored
Recently, from commit 94a1fedd ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs"), new API has been added to libbpf that allows to parse BTF from raw data file (btf__parse_raw()). The commit derives build failure of samples/bpf due to improper access of uninitialized pointer at btf_parse_raw(). btf.c: In function btf__parse_raw: btf.c:625:28: error: btf may be used uninitialized in this function 625 | return err ? ERR_PTR(err) : btf; | ~~~~~~~~~~~~~~~~~~~^~~~~ This commit fixes the build failure of samples/bpf by adding code of initializing btf pointer as NULL. Fixes: 94a1fedd ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs") Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805223359.32109-1-danieltimlee@gmail.com
-
Alexei Starovoitov authored
Yonghong Song says: ==================== Andrii raised a concern that current uapi for bpf iterator map element is a little restrictive and not suitable for future potential complex customization. This is a valid suggestion, considering people may indeed add more complex custimization to the iterator, e.g., cgroup_id + user_id, etc. for task or task_file. Another example might be map_id plus additional control so that the bpf iterator may bail out a bucket earlier if a bucket has too many elements which may hold lock too long and impact other parts of systems. Patch #1 modified uapi with kernel changes. Patch #2 adjusted libbpf api accordingly. Changelogs: v3 -> v4: . add a forward declaration of bpf_iter_link_info in tools/lib/bpf/bpf.h in case that libbpf is built against not-latest uapi bpf.h. . target the patch set to "bpf" instead of "bpf-next" v2 -> v3: . undo "not reject iter_info.map.map_fd == 0" from v1. In the future map_fd may become optional, so let us use map_fd == 0 indicating the map_fd is not set by user space. . add link_info_len to bpf_iter_attach_opts to ensure always correct link_info_len from user. Otherwise, libbpf may deduce incorrect link_info_len if it uses different uapi header than the user app. v1 -> v2: . ensure link_create target_fd/flags == 0 since they are not used. (Andrii) . if either of iter_info ptr == 0 or iter_info_len == 0, but not both, return error to user space. (Andrii) . do not reject iter_info.map.map_fd == 0, go ahead to use it trying to get a map reference since the map_fd is required for map_elem iterator. . use bpf_iter_link_info in bpf_iter_attach_opts instead of map_fd. this way, user space is responsible to set up bpf_iter_link_info and libbpf just passes the data to the kernel, simplifying libbpf design. (Andrii) ==================== Signed-off-by: -
Yonghong Song authored
Previous commit adjusted kernel uapi for map element bpf iterator. This patch adjusted libbpf API due to uapi change. bpftool and bpf_iter selftests are also changed accordingly. Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Yonghong Song authored
Commit a5cbe05a ("bpf: Implement bpf iterator for map elements") added bpf iterator support for map elements. The map element bpf iterator requires info to identify a particular map. In the above commit, the attr->link_create.target_fd is used to carry map_fd and an enum bpf_iter_link_info is added to uapi to specify the target_fd actually representing a map_fd: enum bpf_iter_link_info { BPF_ITER_LINK_UNSPEC = 0, BPF_ITER_LINK_MAP_FD = 1, MAX_BPF_ITER_LINK_INFO, }; This is an extensible approach as we can grow enumerator for pid, cgroup_id, etc. and we can unionize target_fd for pid, cgroup_id, etc. But in the future, there are chances that more complex customization may happen, e.g., for tasks, it could be filtered based on both cgroup_id and user_id. This patch changed the uapi to have fields __aligned_u64 iter_info; __u32 iter_info_len; for additional iter_info for link_create. The iter_info is defined as union bpf_iter_link_info { struct { __u32 map_fd; } map; }; So future extension for additional customization will be easier. The bpf_iter_link_info will be passed to target callback to validate and generic bpf_iter framework does not need to deal it any more. Note that map_fd = 0 will be considered invalid and -EBADF will be returned to user space. Fixes: a5cbe05a ("bpf: Implement bpf iterator for map elements") Signed-off-by:
-
Andrii Nakryiko authored
runqslower's Makefile is building/installing bpftool into $(OUTPUT)/sbin/bpftool, which coincides with $(DEFAULT_BPFTOOL). In practice this means that often when building selftests from scratch (after `make clean`), selftests are racing with runqslower to simultaneously build bpftool and one of the two processes fail due to file being busy. Prevent this race by explicitly order-depending on $(BPFTOOL_DEFAULT). Fixes: a2c9652f ("selftests: Refactor build to remove tools/lib/bpf from include path") Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
git://github.com/cschaufler/smack-nextLinus Torvalds authored
Pull smack updates from Casey Schaufler: "Minor fixes to Smack for the v5.9 release. All were found by automated checkers and have straightforward resolution" * tag 'Smack-for-5.9' of git://github.com/cschaufler/smack-next: Smack: prevent underflow in smk_set_cipso() Smack: fix another vsscanf out of bounds Smack: fix use-after-free in smk_write_relabel_self()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ...
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM updates from Russell King: - add arch/arm/Kbuild from Masahiro Yamada. - simplify act_mm macro, since it contains an open-coded get_thread_info. - VFP updates for Clang from Stefan Agner. - Fix unwinder for Clang from Nathan Huckleberry. - Remove unused it8152 PCI host controller, used by the removed cm-x2xx platforms from Mike Rapoport. - Further explanation of __range_ok(). - Remove kimage_voffset that isn't used anymore from Marc Zyngier. - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel. - Documentation cleanup for mach-* from Pete Zaitcev. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8996/1: Documentation/Clean up the description of mach-<class> ARM: 8995/1: drop Thumb-2 workaround for ancient binutils ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM ARM: uaccess: add further explanation of __range_ok() ARM: 8993/1: remove it8152 PCI controller driver ARM: 8992/1: Fix unwind_frame for clang-built kernels ARM: 8991/1: use VFP assembler mnemonics if available ARM: 8990/1: use VFP assembler mnemonics in register load/store macros ARM: 8989/1: use .fpu assembler directives instead of assembler arguments ARM: 8982/1: mm: Simplify act_mm macro ARM: 8981/1: add arch/arm/Kbuild
-
https://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull arch/csky updates from Guo Ren: "New features: - seccomp-filter - err-injection - top-down&random mmap-layout - irq_work - show_ipi - context-tracking Fixes & Optimizations: - kprobe_on_ftrace - optimize panic print" * tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux: csky: Add context tracking support csky: Add arch_show_interrupts for IPI interrupts csky: Add irq_work support csky: Fixup warning by EXPORT_SYMBOL(kmap) csky: Set CONFIG_NR_CPU 4 as default csky: Use top-down mmap layout csky: Optimize the trap processing flow csky: Add support for function error injection csky: Fixup kprobes handler couldn't change pc csky: Fixup duplicated restore sp in RESTORE_REGS_FTRACE csky: Add cpu feature register hint for smp csky: Add SECCOMP_FILTER supported csky: remove unusued thread_saved_pc and *_segments functions/macros
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull Xtensa updates from Max Filippov: - add syscall audit support - add seccomp filter support - clean up make rules under arch/xtensa/boot - fix state management for exclusive access opcodes - fix build with PMU enabled * tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: add missing exclusive access state management xtensa: fix xtensa_pmu_setup prototype xtensa: add boot subdirectories build artifacts to 'targets' xtensa: add uImage and xipImage to targets xtensa: move vmlinux.bin[.gz] to boot subdirectory xtensa: initialize_mmu.h: fix a duplicated word selftests/seccomp: add xtensa support xtensa: add seccomp support xtensa: expose syscall through user_pt_regs xtensa: add audit support
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull hyperv updates from Wei Liu: - A patch series from Andrea to improve vmbus code - Two clean-up patches from Alexander and Randy * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv: hyperv.h: drop a duplicated word tools: hv: change http to https in hv_kvp_daemon.c Drivers: hv: vmbus: Remove the lock field from the vmbus_channel struct scsi: storvsc: Introduce the per-storvsc_device spinlock Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list updaters) Drivers: hv: vmbus: Use channel_mutex in channel_vp_mapping_show() Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list readers) Drivers: hv: vmbus: Replace cpumask_test_cpu(, cpu_online_mask) with cpu_online() Drivers: hv: vmbus: Remove the numa_node field from the vmbus_channel struct Drivers: hv: vmbus: Remove the target_vp field from the vmbus_channel struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ... -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-ledsLinus Torvalds authored
Pull LED updates from Pavel Machek: "Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests" * tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits) MAINTAINERS: Remove myself as LED subsystem maintainer leds: disallow /sys/class/leds/*:multi:* for now leds: add RGB color option, as that is different from multicolor. Make LEDS_LP55XX_COMMON depend on I2C to fix build errors: Documentation: ABI: leds-turris-omnia: document sysfs attribute leds: initial support for Turris Omnia LEDs dt-bindings: leds: add cznic,turris-omnia-leds binding leds: pattern trigger -- check pattern for validity leds: Replace HTTP links with HTTPS ones leds: trigger: add support for LED-private device triggers leds: lp5521: Add multicolor framework multicolor brightness support leds: lp5523: Update the lp5523 code to add multicolor brightness function leds: lp55xx: Add multicolor framework support to lp55xx leds: lp55xx: Convert LED class registration to devm_* dt-bindings: leds: Convert leds-lp55xx to yaml leds: multicolor: Introduce a multicolor class definition leds: Add multicolor ID to the color ID list dt: bindings: Add multicolor class dt bindings documention leds: lp5523: Fix various formatting issues in the code leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros ...
-
Dean Nelson authored
A VF's mailbox mutex is not getting initialized by nicvf_probe() until after it is first used. And such usage is resulting in... [ 28.270927] ------------[ cut here ]------------ [ 28.270934] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 28.270980] WARNING: CPU: 9 PID: 675 at kernel/locking/mutex.c:938 __mutex_lock+0xdac/0x12f0 [ 28.270985] Modules linked in: ast(+) nicvf(+) i2c_algo_bit drm_vram_helper drm_ttm_helper ttm nicpf(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ixgbe(+) sg thunder_bgx mdio i2c_thunderx mdio_thunder thunder_xcv mdio_cavium dm_mirror dm_region_hash dm_log dm_mod [ 28.271064] CPU: 9 PID: 675 Comm: systemd-udevd Not tainted 4.18.0+ #1 [ 28.271070] Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS F02 08/06/2019 [ 28.271078] pstate: 60000005 (nZCv daif -PAN -UAO) [ 28.271086] pc : __mutex_lock+0xdac/0x12f0 [ 28.271092] lr : __mutex_lock+0xdac/0x12f0 [ 28.271097] sp : ffff800d42146fb0 [ 28.271103] x29: ffff800d42146fb0 x28: 0000000000000000 [ 28.271113] x27: ffff800d24361180 x26: dfff200000000000 [ 28.271122] x25: 0000000000000000 x24: 0000000000000002 [ 28.271132] x23: ffff20001597cc80 x22: ffff2000139e9848 [ 28.271141] x21: 0000000000000000 x20: 1ffff001a8428e0c [ 28.271151] x19: ffff200015d5d000 x18: 1ffff001ae0f2184 [ 28.271160] x17: 0000000000000000 x16: 0000000000000000 [ 28.271170] x15: ffff800d70790c38 x14: ffff20001597c000 [ 28.271179] x13: ffff20001597cc80 x12: ffff040002b2f779 [ 28.271189] x11: 1fffe40002b2f778 x10: ffff040002b2f778 [ 28.271199] x9 : 0000000000000000 x8 : 00000000f1f1f1f1 [ 28.271208] x7 : 00000000f2f2f2f2 x6 : 0000000000000000 [ 28.271217] x5 : 1ffff001ae0f2186 x4 : 1fffe400027eb03c [ 28.271227] x3 : dfff200000000000 x2 : ffff1001a8428dbe [ 28.271237] x1 : c87fdfac7ea11d00 x0 : 0000000000000000 [ 28.271246] Call trace: [ 28.271254] __mutex_lock+0xdac/0x12f0 [ 28.271261] mutex_lock_nested+0x3c/0x50 [ 28.271297] nicvf_send_msg_to_pf+0x40/0x3a0 [nicvf] [ 28.271316] nicvf_register_misc_interrupt+0x20c/0x328 [nicvf] [ 28.271334] nicvf_probe+0x508/0xda0 [nicvf] [ 28.271344] local_pci_probe+0xc4/0x180 [ 28.271352] pci_device_probe+0x3ec/0x528 [ 28.271363] driver_probe_device+0x21c/0xb98 [ 28.271371] device_driver_attach+0xe8/0x120 [ 28.271379] __driver_attach+0xe0/0x2a0 [ 28.271386] bus_for_each_dev+0x118/0x190 [ 28.271394] driver_attach+0x48/0x60 [ 28.271401] bus_add_driver+0x328/0x558 [ 28.271409] driver_register+0x148/0x398 [ 28.271416] __pci_register_driver+0x14c/0x1b0 [ 28.271437] nicvf_init_module+0x54/0x10000 [nicvf] [ 28.271447] do_one_initcall+0x18c/0xc18 [ 28.271457] do_init_module+0x18c/0x618 [ 28.271464] load_module+0x2bc0/0x4088 [ 28.271472] __se_sys_finit_module+0x110/0x188 [ 28.271479] __arm64_sys_finit_module+0x70/0xa0 [ 28.271490] el0_svc_handler+0x15c/0x380 [ 28.271496] el0_svc+0x8/0xc [ 28.271502] irq event stamp: 52649 [ 28.271513] hardirqs last enabled at (52649): [<ffff200011b4d790>] _raw_spin_unlock_irqrestore+0xc0/0xd8 [ 28.271522] hardirqs last disabled at (52648): [<ffff200011b4d3c4>] _raw_spin_lock_irqsave+0x3c/0xf0 [ 28.271530] softirqs last enabled at (52330): [<ffff200010082af4>] __do_softirq+0xacc/0x117c [ 28.271540] softirqs last disabled at (52313): [<ffff20001019b354>] irq_exit+0x3cc/0x500 [ 28.271545] ---[ end trace a9b90324c8a0d4ee ]--- This problem is resolved by moving the call to mutex_init() up earlier in nicvf_probe(). Fixes: 609ea65c ("net: thunderx: add mutex to protect mailbox from concurrent calls for same VF") Signed-off-by:
Dean Nelson <dnelson@redhat.com> Signed-off-by:
-
