- 05 May, 2020 19 commits
-
-
YueHaibing authored
There's no callers in-tree anymore since commit 5952fde1 ("net: sched: choke: remove dead filter classify code") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There's no callers in-tree. Signed-off-by:
-
YueHaibing authored
commit 4ca3221f ("myri10ge: Convert from LRO to GRO") left behind this, remove it. Signed-off-by:
-
YueHaibing authored
There's no caller in-tree since commit 2af6106a ("net: stmmac: Introducing support for Page Pool") Signed-off-by:
-
YueHaibing authored
commit 84411f73 ("net: mv643xx_eth: Avoid setting the initial TCP checksum") left behind this, remove it. Signed-off-by:
-
YueHaibing authored
There's no callers in-tree anymore. Signed-off-by:
-
YueHaibing authored
There's no callers in-tree anymore. Signed-off-by:
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/ti/cpsw_new.c:1924:2-17: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/ti/cpsw_new.c:1231:1-16: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:1991:5-46: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:1993:10-54: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2380:5-38: WARNING: Comparison to bool Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/agere/et131x.c:717:3-22: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/agere/et131x.c:721:1-20: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Jason Yan authored
No need to convert '==' expression to bool. This fixes the following coccicheck warning: drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1189:63-68: WARNING: conversion to bool not needed here Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/qlogic/qede/qede_main.c:1717:5-19: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1548:17-31: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1148:16-24: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1158:30-38: WARNING: Comparison to bool Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:1585:3-25: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:1588:3-25: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by:
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by:
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by:
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. And emac_start_xmit() can leak one skb if 'channel' == 3. Signed-off-by:
-
- 04 May, 2020 21 commits
-
-
David S. Miller authored
Cong Wang says: ==================== net: reduce dynamic lockdep keys syzbot has been complaining about low MAX_LOCKDEP_KEYS for a long time, it is mostly because we register 4 dynamic keys per network device. This patchset reduces the number of dynamic lockdep keys from 4 to 1 per netdev, by reverting to the previous static keys, except for addr_list_lock which still has to be dynamic. The second patch removes a bonding-specific key by the way. ==================== Signed-off-by: -
Cong Wang authored
After commit b3e80d44 ("bonding: fix lockdep warning in bond_get_stats()") the dynamic key is no longer necessary, as we compute nest level at run-time. So, we can just remove it to save some lockdep key entries. Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond0 master bond1 ip link set bond0 nomaster ip link set bond1 master bond0 Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
This patch reverts the folowing commits: commit 064ff66e "bonding: add missing netdev_update_lockdep_key()" commit 53d37497 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68f "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: k3: introduce common platform time sync driver - cpts This series introduced support for significantly upgraded TI A65x/J721E Common platform time sync (CPTS) modules which are part of AM65xx Time Synchronization Architecture [1]. The TI A65x/J721E now contain more than one CPTS instance: - MCU CPSW CPTS (IEEE 1588 compliant) - Main NAVSS CPTS (central) - PCIe CPTS(s) (PTM compliant) - J721E: Main CPSW9g CPTS (IEEE 1588 compliant) which can work as separately as interact to each other through Time Sync Router (TSR) and Compare Event Router (CER). In addition there are also ICSS-G IEP blocks which can perform similar timsync functions, but require FW support. More info also available in TRM [2][3]. Not all above modules are available to the Linux by as of now as some of them are reserved for RTOS/FW purposes. The scope of this submission is TI A65x/J721E CPSW CPTS and Main NAVSS CPTS, and TSR was used for testing purposes. +---------------------------+ | MCU CPSW | +-------------------+ +------------------------+ | TS | | Main Navss CPTS | | Time Sync Router (TSR) | | +-------------+ | | | | | | | | | | HW1_TS +<----------+ | | +--------v-----+ +--+--+ | | | | | | CPTS | |Port | | ... | | | X+-->HW1_TS | | | | HW8_TS <------------<---------+ | X|-->HW2_TS | +--^--+ | | | | +--------------->HW3_TS | | | | | | | +--------------->HW4_TS | | | | | | | | | | | | | | | | | | | | | | | | Genf0 +-----------> (A)---------+ +<--------------+Genf0 | | | | | | | | | | | | | | ... | | +-----------> <---------------+Genf1 ESTf+-------+ | | | | | | | | | | | | | | +--------------+ | | Genf8 +---------->+ | | | | | | SYNC0 ... SYNC3 | | | +-------------------+ +------+------------+----+ +---------------------------+ + + X X (A) shows possible routing path for MCU CPSW CPTS Genf0 signal as an example. Main features of the new TI A65x/J721E CPTS modules are: - 64-bit timestamp/counter mode support in ns by using add_val - implemented in HW PPM and nudge adjustment. - control of time sync events via interrupt or polling - selection of multiple external reference clock sources - hardware timestamp of ext. inputs events (HWx_TS_PUSH) - periodic generator function outputs (TS_GENFx) - (CPSW only) Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn), which drives TSN schedule - timestamping of all RX packets bypassing CPTS FIFO Patch 1 - DT bindings Patch 2 - the AM65x/J721E driver Patch 3 - enables packet timestamping support in TI AM65x/J721E MCU CPSW driver. Patches 4-7 - DT updates. === PTP Testing: phc2sys -s CLOCK_REALTIME -c eth0 -m -O 0 -u30 phc2sys[627.331]: eth0 rms 409912446712787392 max 1587584079521858304 freq -6665 +/- 35040 delay 832 +/- 27 phc2sys[657.335]: eth0 rms 33 max 66 freq -0 +/- 28 delay 820 +/- 30 phc2sys[687.339]: eth0 rms 37 max 70 freq -1 +/- 32 delay 830 +/- 29 phc2sys[717.343]: eth0 rms 33 max 71 freq -0 +/- 29 delay 828 +/- 23 phc2sys[747.346]: eth0 rms 35 max 75 freq -0 +/- 31 delay 829 +/- 26 phc2sys[777.350]: eth0 rms 37 max 68 freq -1 +/- 32 delay 825 +/- 25 phc2sys[807.354]: eth0 rms 28 max 57 freq -1 +/- 25 delay 824 +/- 21 phc2sys[837.358]: eth0 rms 43 max 81 freq -1 +/- 37 delay 836 +/- 23 phc2sys[867.361]: eth0 rms 33 max 74 freq +0 +/- 29 delay 828 +/- 24 phc2sys[897.365]: eth0 rms 35 max 77 freq -2 +/- 30 delay 824 +/- 25 phc2sys[927.369]: eth0 rms 28 max 50 freq +0 +/- 25 delay 825 +/- 25 ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp1 -f ptp.cfg -s ptp4l[22095.754]: port 1: MASTER to UNCALIBRATED on RS_SLAVE ptp4l[22097.754]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[22159.757]: rms 317 max 1418 freq +79 +/- 186 delay 410 +/- 1 ptp4l[22223.760]: rms 9 max 24 freq +42 +/- 12 delay 409 +/- 1 ptp4l[22287.763]: rms 10 max 28 freq +41 +/- 11 delay 410 +/- 1 ptp4l[22351.767]: rms 10 max 26 freq +34 +/- 12 delay 410 +/- 1 ptp4l[22415.770]: rms 10 max 26 freq +49 +/- 14 delay 410 +/- 1 === Ext. HW_TS and Genf testing: For testing purposes Time Sync Router (TSR) can be modeled in DT as pin controller + timesync_router: timesync_router@A40000 { + compatible = "pinctrl-single"; + reg = <0x0 0xA40000 0x0 0x800>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x800007ff>; + }; then signals routing can be done in board file, for example: +#define TS_OFFSET(pa, val) (0x4+(pa)*4) (0x80000000 | val) + +×ync_router { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpts>; + + /* Example of the timesync routing */ + mcu_cpts: mcu_cpts { + pinctrl-single,pins = < + /* [cpts genf1] in13 -> out25 [cpts hw4_push] */ + TS_OFFSET(25, 13) + /* [cpts genf1] in13 -> out0 [main cpts hw1_push] */ + TS_OFFSET(0, 13) + /* [main cpts genf0] in4 -> out1 [main cpts hw2_push] */ + TS_OFFSET(1, 4) + /* [main cpts genf0] in4 -> out24 [cpts hw3_push] */ + TS_OFFSET(24, 4) + >; + }; +}; will create link: cpsw cpts Genf1 -> main cpts hw1_push -> cpsw cpts hw4_push main cpts Genf0 -> main cpts hw2_push -> cpsw cpts hw3_push testptp -d /dev/ptp0 -i 0 -p 1000000000 periodic output request okay testptp -d /dev/ptp0 -i 1 -e 5 external time stamp request okay event index 1 at 22583.000000025 event index 1 at 22584.000000025 event index 1 at 22585.000000025 event index 1 at 22586.000000025 event index 1 at 22587.000000025 testptp -d /dev/ptp1 -i 2 -e 5 external time stamp request okay event index 2 at 1587606764.249304554 event index 2 at 1587606765.249304467 event index 2 at 1587606766.249304380 event index 2 at 1587606767.249304293 event index 2 at 1587606768.249304206 [1] https://www.ti.com/lit/pdf/spracp7 [2] https://www.ti.com/lit/pdf/sprz452 [3] https://www.ti.com/lit/pdf/spruil1 ==================== Signed-off-by: -
Grygorii Strashko authored
Add DT node for Main NAVSS CPTS module. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
Add DT node for The TI J721E MCU CPSW CPTS which is part of MCU CPSW NUSS. Signed-off-by:
-
Grygorii Strashko authored
Add DT node for Main NAVSS CPTS module. Signed-off-by:
-
Grygorii Strashko authored
Add DT node for the TI AM65x SoC Common Platform Time Sync (CPTS). Signed-off-by:
-
Grygorii Strashko authored
The MCU CPSW Common Platform Time Sync (CPTS) provides possibility to timestamp TX PTP packets and all RX packets. This enables corresponding support in TI AM65x/J721E MCU CPSW driver. Signed-off-by:
-
Grygorii Strashko authored
The CPTS module is used to facilitate host control of time sync operations. Main features of CPTS module are: - selection of multiple external clock sources - control of time sync events via interrupt or polling - 64-bit timestamp mode in ns with HW PPM and nudge adjustment. - hardware timestamp ext. inputs (HWx_TS_PUSH) - timestamp Generator function outputs (TS_GENFx) Depending on integration it enables compliance with the IEEE 1588-2008 standard for a precision clock synchronization protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time Measurement (PTM). Introduced driver provides Linux PTP hardware clock for each CPTS device and network packets timestamping where applicable. CPTS PTP hardware clock supports following operations: - Set time - Get time - Shift the clock by a given offset atomically - Adjust clock frequency - Time stamp external events - Periodic output signals Signed-off-by: -
Grygorii Strashko authored
Document device tree bindings for TI AM654/J721E SoC The Common Platform Time Sync (CPTS) module. The CPTS module is used to facilitate host control of time sync operations. Main features of CPTS module are: - selection of multiple external clock sources - 64-bit timestamp mode in ns with ppm and nudge adjustment. - control of time sync events via interrupt or polling - hardware timestamp of ext. events (HWx_TS_PUSH) - periodic generator function outputs (TS_GENFx) - PPS in combination with timesync router - Depending on integration it enables compliance with the IEEE 1588-2008 standard for a precision clock synchronization protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time Measurement (PTM). Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== devlink: kernel region snapshot id allocation currently users have to find a free snapshot id to pass to the kernel when they are requesting a snapshot to be taken. This set extends the kernel so it can allocate the id on its own and send it back to user space in a response. ==================== Signed-off-by: -
Jakub Kicinski authored
In past discussions Jiri explained snapshot ids are cross-region. Explain this in the docs. v3: new patch Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
Currently users have to choose a free snapshot id before calling DEVLINK_CMD_REGION_NEW. This is potentially racy and inconvenient. Make the DEVLINK_ATTR_REGION_SNAPSHOT_ID optional and try to allocate id automatically. Send a message back to the caller with the snapshot info. Example use: $ devlink region new netdevsim/netdevsim1/dummy netdevsim/netdevsim1/dummy: snapshot 1 $ id=$(devlink -j region new netdevsim/netdevsim1/dummy | \ jq '.[][][][]') $ devlink region dump netdevsim/netdevsim1/dummy snapshot $id [...] $ devlink region del netdevsim/netdevsim1/dummy snapshot $id v4: - inline the notification code v3: - send the notification only once snapshot creation completed. v2: - don't wrap the line containing extack; - add a few sentences to the docs. Signed-off-by:Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Jakub Kicinski authored
We'll need to send snapshot info back on the socket which requested a snapshot to be created. Factor out constructing a snapshot description from the broadcast notification code. v3: new patch Signed-off-by:
-
Eric Dumazet authored
QUIC servers would like to use SO_TXTIME, without having CAP_NET_ADMIN, to efficiently pace UDP packets. As far as sch_fq is concerned, we need to add safety checks, so that a buggy application does not fill the qdisc with packets having delivery time far in the future. This patch adds a configurable horizon (default: 10 seconds), and a configurable policy when a packet is beyond the horizon at enqueue() time: - either drop the packet (default policy) - or cap its delivery time to the horizon. $ tc -s -d qd sh dev eth0 qdisc fq 8022: root refcnt 257 limit 10000p flow_limit 100p buckets 1024 orphan_mask 1023 quantum 10Kb initial_quantum 51160b low_rate_threshold 550Kbit refill_delay 40.0ms timer_slack 10.000us horizon 10.000s Sent 1234215879 bytes 837099 pkt (dropped 21, overlimits 0 requeues 6) backlog 0b 0p requeues 6 flows 1191 (inactive 1177 throttled 0) gc 0 highprio 0 throttled 692 latency 11.480us pkts_too_long 0 alloc_errors 0 horizon_drops 21 horizon_caps 0 v2: fixed an overflow on 32bit kernels in fq_init(), reported by kbuild test robot <lkp@intel.com> Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Currently if the default qdisc setup/init fails, the device ends up with qdisc "noop", which causes all TX packets to get dropped. With the introduction of sysctl net/core/default_qdisc it is possible to change the default qdisc to be more advanced, which opens for the possibility that Qdisc_ops->init() can fail. This patch detect these kind of failures, and choose to fallback to qdisc "noqueue", which is so simple that its init call will not fail. This allows the interface to continue functioning. V2: As this also captures memory failures, which are transient, the device is not kept in IFF_NO_QUEUE state. This allows the net_device to retry to default qdisc assignment. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: I/O map SMEM and IMEM This series adds the definition of two memory regions that must be mapped for IPA to access through an SMMU. It requires the SMMU to be defined in the IPA node in the SoC's Device Tree file. There is no change since version 1 to the content of the code in these patches, *however* this time the first patch is an update to the binding definition rather than an update to a DTS file. ==================== Signed-off-by: -
Alex Elder authored
Arrange to use an item from SMEM memory for IPA. SMEM item number 497 is designated to be used by the IPA. Specify the item ID and size of the region in platform configuration data. Allocate and get a pointer to this region from ipa_mem_init(). The memory must be mapped for access through an SMMU. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Define a region of IMEM memory available for use by IPA in the platform configuration data. Initialize it from ipa_mem_init(). The memory must be mapped for access through an SMMU. Signed-off-by:
-
Alex Elder authored
The ipa_mem_data structure type was never actually used. Instead, the IPA memory regions were defined using the ipa_mem structure. Redefine struct ipa_mem_data so it encapsulates the array of IPA-local memory region descriptors along with the count of entries in that array. Pass just an ipa_mem structure pointer to ipa_mem_init(). Rename the ipa_mem_data[] array ipa_mem_local_data[] to emphasize that the memory regions it defines are IPA-local memory. Signed-off-by:
-
