Prepare input updates for 4.21 merge window.

This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS
Aspire F5-573G.
Signed-off-by: Patrick Dreyer <Patrick.Dreyer@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the user attempts to update Atmel device with an invalid configuration
cfg file, error handling code is trying to free cfg file memory which is
not allocated yet hence results into kernel crash.

This patch fixes the order of memory free operations.
Signed-off-by: Sanjeev Chugh <sanjeev_chugh@mentor.com>
Fixes: a4891f10 ("Input: atmel_mxt_ts - zero terminate config firmware file")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There are some statements that are indented incorrectly, fix this by
removing the extra tabs.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

dmesg reports that "Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13)
says it can support a different bus."

I've tested the offered psmouse.synaptics_intertouch=1 with 4.18.x and
4.19.x and it seems to work well. No problems seen with suspend/resume.

Also, it appears that RMI/SMBus mode is actually required for 3-4 finger
multitouch gestures to work -- otherwise they are not reported at all.

Information from dmesg in both modes:

  psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1,
      caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742

  psmouse serio3: synaptics: Trying to set up SMBus access
  rmi4_smbus 6-002c: registering SMbus-connected sensor
  rmi4_f01 rmi4-00.fn01: found RMI device,
      manufacturer: Synaptics, product: TM3139-001, fw id: 2000742
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch fixes the coding style problem reported
by checkpatch.pl as below:

ERROR: foo* bar should be "foo *bar"
Signed-off-by: Hardik Singh Rathore <hardiksingh.k@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add's support to Raspberry Pi's 7" Touch device. Instead of using a
conventional bus all information is copied into a memory mapped area by
RPi's firmware.

Based on the driver found in RPi's kernel repository.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The current implementation of elan_i2c is known to not support those
2 laptops.

A proper fix is to tweak both elantech and elan_i2c to transmit the
correct information from PS/2, which would make a bad candidate for
stable.

So to give us some time for fixing the root of the problem, disable
elan_i2c for the devices we know are not behaving properly.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600
Link: https://bugs.archlinux.org/task/59714
Fixes: df077237 Input: elantech - detect new ICs and setup Host Notify for them

Cc: stable@vger.kernel.org  # v4.18+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The loop exits with "timeout" set to -1 not to 0.

Fixes: 1158f0f1 ("Input: add support for Nomadik SKE keypad controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When a driver fails to bind because a resource it still missing it's not
helpful to report this as (usually) probing is repeated later.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Before commit 7fd6d98b ("i2c: i801: Allow ACPI AML access I/O
ports not reserved for SMBus"), enabling RMI on the T560 would cause
the touchpad to stop working after resuming from suspend. Now that
this issue is fixed, RMI can be enabled safely and works fine.
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Yussuf Khalil <dev@pp3345.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

With PM enabled, I noticed that pressing a key on the droid4 keyboard will
block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT
and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as
suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>.

From the hardware point of view, looks like we need to manage the registers
for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid
blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE
register now gone with IRQF_ONESHOT, also the SoC idle state problem is
gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in
omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent
blocking deeper SoC idle states after rmmod omap4-keypad.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

I noticed that the Android v3.0.8 kernel on droid4 is using different
keypad values from the mainline kernel and does not have issues with
keys occasionally being stuck until pressed again. Turns out there was
an earlier patch posted to fix this as "Input: omap-keypad: errata i689:
Correct debounce time", but it was never reposted to fix use macros
for timing calculations.

This updated version is using macros, and also fixes the use of the
input clock rate to use 32768KiHz instead of 32000KiHz. And we want to
use the known good Android kernel values of 3 and 6 instead of 2 and 6
in the earlier patch.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since we continue to find tons of new variants [0,1,2,3,4,5,6] that
need the PDP quirk, let's just quirk all devices from PDP.

[0]: https://github.com/paroj/xpad/pull/104
[1]: https://github.com/paroj/xpad/pull/105
[2]: https://github.com/paroj/xpad/pull/108
[3]: https://github.com/paroj/xpad/pull/109
[4]: https://github.com/paroj/xpad/pull/112
[5]: https://github.com/paroj/xpad/pull/115
[6]: https://github.com/paroj/xpad/pull/116

Fixes: e5c9c6a8 ("Input: xpad - add support for PDP Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000
series,

This device has been reported in these messages in the "linux-input"
mailing list:
* https://marc.info/?l=linux-input&m=152016683003369&w=2
* https://www.spinics.net/lists/linux-input/msg52525.htmlReported-by: Nitesh Debnath <niteshkd1999@gmail.com>
Reported-by: Teika Kazura <teika@gmx.com>
Signed-off-by: Teika Kazura <teika@gmx.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Noticed the other day the trackpoint felt different on my P50, then
realized it was because rmi4 wasn't loading for this machine
automatically. Suspend/resume, hibernate, and everything else seem to
work perfectly fine on here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.
Signed-off-by: Noah Westervelt <nwestervelt@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.
Signed-off-by: Adam Wong <adam@adamwong.me>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/input/serio/olpc_apsp.c: In function 'olpc_apsp_probe':
drivers/input/serio/olpc_apsp.c:192:22: warning:
 variable 'np' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit b56ece9a ("Input: add OLPC
AP-SP driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Without the clock, the keyboard controller won't operate.
Tested on an OLPC XO 1.75.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's defer the FIFO status checking until open().

When we'll get a clk handle, this will allow us to defer clock enablement
until the device is actually used.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

CONFIG_OLPC is specific to the x86 platform code, while the driver is for
an ARM-based laptop.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The "security processor", sometimes referred to as "wireless trusted
module" or "generic encrypt unit" is a low-power core present on MMP2,
that has nothing to do with security, wireless, trust or encryption.

On an OLPC machine it runs CForth and serves as a keyboard controller:
http://dev.laptop.org/git/users/wmb/cforth/tree/src/app/arm-xo-1.75/ps2.fth

The register address was obtained from the OLPC kernel, since the
datasheet seems to be the Marvell's most important business secret.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is the clock for the "security processor" core.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It makes little sense but still possible to put Hyper-V guests into
suspend-to-idle state. To wake them up two wakeup sources were registered
in the past: hyperv-keyboard and hid-hyperv. However, since
commit eed4d47e ("ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch
to pm_wakeup_hard_event() API as these devices are actually the only
possible way to wakeup Hyper-V guests.

Fixes: eed4d47e (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This driver supports configuration via platform data but
absolutely nothing in the upstream kernel uses it. Since this
configuration allows harmful practices such as encoding the
GPIO base for the chip, delete platform data support so that
no new platform using it gets introduced.

Also: include the right driver header, not <linux/gpio.h>.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Trivial fix to clean up indentation issues, add missing tab
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.

As original license mentioned, it is GPL-2.0 in SPDX.
Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL".
See ${LINUX}/include/linux/module.h

	"GPL"		[GNU Public License v2 or later]
	"GPL v2"	[GNU Public License v2]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replace sysrq-reset-seq with keyset.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The cros_ec_keyb_bs array lists buttons and switches together, expecting
that its users will match the appropriate type and bit fields. But
cros_ec_keyb_register_bs() only checks the 'bit' field, which causes
misreported input capabilities in some cases. For example, tablets
(e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID
capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to
share the same bit.

(This has comedic effect on a tablet, in which a power-management daemon
then thinks this "lid" is closed, and so puts the system to sleep as
soon as it boots!)

To fix this, check both the 'ev_type' and 'bit' fields before reporting
the capability.

Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid
(Scarlet / Acer Chromebook Tab 10).

This error got introduced when porting the feature from the downstream
Chromium OS kernel to be upstreamed.

Fixes: cdd7950e ("input: cros_ec_keyb: Add non-matrix buttons and switches")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add ELAN0620 to the ACPI table to support the elan touchpad in
the Lenovo IdeaPad 130-15IKB.
Signed-off-by: Patrick Gaskin <patrick@pgaskin.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

"of_get_named_gpio()" returns a negative error value if it fails
and drivers should check for this. This missing check was now
added to the matrix_keypad driver.

In my case "of_get_named_gpio()" returned -EPROBE_DEFER because
the referenced GPIOs belong to an I/O expander, which was not yet
probed at the point in time when the matrix_keypad driver was
loading. Because the driver did not check for errors from the
"of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER"
is actually a GPIO number and continued as usual, which led to further
errors like this later on:

WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114
gpio_to_desc+0xc8/0xd0
invalid GPIO -517

Note that the "GPIO number" -517 in the error message above is
actually "-EPROBE_DEFER".

As part of the patch a misleading error message "no platform data defined"
was also removed. This does not lead to information loss because the other
error paths in matrix_keypad_parse_dt() already print an error.
Signed-off-by: Christian Hoff <christian_hoff@gmx.net>
Suggested-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 4.20 merge window.

synaptics_detect() does not check whether sending commands to the
device succeeds and instead relies on getting unique data from the
device. Let's make sure we seed entire buffer with zeroes to make sure
we will not use garbage on stack that just happen to be 0x47.

Reported-by: syzbot+13cb3b01d0784e4ffc3f@syzkaller.appspotmail.com
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case, I placed the "fall through"
part at the beginning of the code comment, which is what GCC is
expecting to find.

Addresses-Coverity-ID: 114757 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15IGM.
Signed-off-by: Mikhail Nikiforov <jackxviichaos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case, I replaced the "Fallthrough state"
commern with a proper "Fall through", which is what GCC is expecting to
find.

Addresses-Coverity-ID: 114758 ("Missing break in switch")
Addresses-Coverity-ID: 114759 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Loading then unloading wm97xx-ts.ko when CONFIG_AC97_BUS=m
causes a WARNING: from drivers/base/driver.c:

Unexpected driver unregister!
WARNING: CPU: 0 PID: 1709 at ../drivers/base/driver.c:193 driver_unregister+0x30/0x40

Fix this by only calling driver_unregister() with the same
condition that driver_register() is called.

Fixes: ae9d1b5f ("Input: wm97xx: add new AC97 bus support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>