- 03 Apr, 2020 6 commits
-
-
Aaron Ma authored
On ARCTURUS and RENOIR, powerplay is not supported yet. When plug in or unplug power jack, ACPI event will issue. Then kernel NULL pointer BUG will be triggered. Check for NULL pointers before calling. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Likun Gao authored
Change SH_MEM_CONFIG Alignment mode to Automatic, as: 1)OGL fn_amd_compute_shader will failed with unaligned mode. 2)The default alignment mode was defined to automatic on gfx10 specification. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Tiecheng Zhou authored
hwmgr->pm_en is initialized at hwmgr_hw_init. during amdgpu_device_init, there is amdgpu_asic_reset that calls to pp_get_asic_baco_capability, while hwmgr->pm_en has not yet been initialized. so avoid using pm_en in pp_get_asic_baco_capability. Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Yintian Tao <yttao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Prike Liang authored
As the pmfw hasn't exported the interface of SMU feature mask to APU SKU so just force on all the features to driver inquired interface at early initial stage. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Shirish S authored
Fixes build error of: "use of undeclared identifier 'RENOIR_A0'" To fix the same, this patch re-orders the ASIC declarations accordingly. Fixes: 41ef3dcd ("drm/amd/display: Fix RV2 Variant Detection") Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yuxian Dai authored
1.Using the FCLK DPM table to set the MCLK for DPM states consist of three entities: FCLK UCLK MEMCLK All these three clk change together, MEMCLK from FCLK, so use the fclk frequency. 2.we should show the current working clock freqency from clock table metric Signed-off-by: Yuxian Dai <Yuxian.Dai@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kevin Wang <Kevin1.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 01 Apr, 2020 1 commit
-
-
Jack Zhang authored
Originally, it kfrees the wrong pointer for mem_obj. It would cause memory leak under stress test. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 31 Mar, 2020 17 commits
-
-
Bhawanpreet Lakha authored
[Why] Some displays have an issue where the hdcp chips are initialized after the display has already lit up. This means we can sometimes authentication too early and cause authentication failures. This happens when HDCP is enabled and the display is power cycled. Normally we will authenticate 2 seconds after the display is lit, but some displays need a bit more time. [How] Increase delay to 3 second before we start authentication. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bhawanpreet Lakha authored
[Why] -We need to cancel future callbacks/watchdogs events when a callback/watchdog event happens [How] -fix typo in event_callback() -cancel callback, not watchdog -cancel watchdog events in event_watchdog_timer(). Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Bhawanpreet Lakha authored
[Why] When content type property is set to 1. We should enable hdcp2.2 and if we cant then stop. Currently the way it works in DC is that if we fail hdcp2, we will try hdcp1 after. [How] Use link config to force disable hdcp1.4 when type1 is set. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
This is ASIC specific and should be placed in _ppt.c of each ASIC. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
This is already done in soc15.c. And this is really ASIC specific and should not be placed here. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Dmytro Laktyushkin authored
[Why] DML expects num_states to exclude the duplicate state. [How] Set num_states to correct value to prevent array off-by-one error. Also refactor max clock level code for diags. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Stylon Wang authored
[Why] BT2020 is not supported in COLOR_ENCODING property of planes. Only BT601 and BT709 was available. [How] Allow BT2020 as legit value in setting COLOR_ENCODING property. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
[Why] Nominal pixel clock and EDID information differ in precision so although monitor reports maximum refresh is 2x minimum, LFC was not being enabled. [How] Use minimum refresh rate as nominal/2 when EDID dictates that min refresh = max refresh/2. v2: squash in 64 bit divide fix Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Stylon Wang authored
[Why] CTM was only supported at CRTC level and we need color space conversion in linear space at plane level. [How] - Add plane-level CTM to dc interface - Program plane-level CTM in DCN Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Isabel Zhang authored
[Why] Change is causing a regression where the OPC app no longer functions properly. [How] Revert the changelist causing the issue. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yongqiang Sun authored
[Why] In some scenario like 1366x768 VSR enabled connected with a 4K monitor and playing 4K video in clone mode, underflow will be observed due to decrease dppclk when previouse surface scan isn't finished [How] In this use case, surface flip is switching between 4K and 1366x768, 1366x768 needs smaller dppclk, and when decrease the clk and previous surface scan is for 4K and scan isn't done, underflow will happen. Not doing optimize bandwidth in case of flip pending. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nicholas Kazlauskas authored
[Why] For some monitors extreme flickering can occur while using LFC for if we're not doing the DRR timing update for V_TOTAL_MIN / V_TOTAL_MAX at the DP start of frame. Hardware can default to any time in the frame which isn't the behavior we want. [How] Add a new function for setting the double buffering mode for DRR timing. Default to DP start of frame double buffering on timing generator init. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Stylon Wang authored
[Why] P010 pixel format is not declared as supported in DRM and DM. [How] Add P010 format to the support list presented to DRM and checked in DM Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Eric Bernstein authored
[Why] Diagnostics scaling test failing to set required number of vertical taps in 4:2:0 surface case [How] In dpp3_get_optimal_number_of_taps() need to use LB_MEMORY_CONFIG_3 for 4:2:0 surface case. In resource_build_scaling_params() make sure to also set plane res alpha enable based on updated surface state Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Kevin Wang authored
the HPD bo size calculation error. the "mem.size" can't present actual BO size all time. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <Christian.Koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
A bit smaller this time around.. there are still a couple uabi additions for vulkan waiting in the wings, but I punted on them this cycle due to running low on time. (They should be easy enough to rebase, and if it is a problem for anyone I can push a next+uabi branch so that tu work can proceed.) The bigger change is refactoring dpu resource manager and moving dpu to use atomic global state. Other than that, it is mostly cleanups and fixes. From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGuf1R4Xz-t9Z7_cwx9jD=b4wUvvwfqA5cHR8fCSXSd5XQ@mail.gmail.com Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
msm needed rc6, so I just went and merged release (msm has been in drm-next outside of this tree) Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 30 Mar, 2020 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Fixes for instability on Baytrail and Haswell; Ice Lake RPS; Sandy Bridge RC6; and few others around GT hangchec/reset; livelock; and a null dereference. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200327081607.GA3082710@intel.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.7-2020-03-26: amdgpu: - Remove a dpm quirk that is not necessary - Fix handling of AC/DC mode in newer SMU firmwares on navi - SR-IOV fixes - RAS fixes scheduler: - Fix a race condition radeon: - Remove a dpm quirk that is not necessary Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200326155310.5486-1-alexander.deucher@amd.com
-
- 29 Mar, 2020 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge vm fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/sparse: fix kernel crash with pfn_section_valid check mm: fork: fix kernel_stack memcg stats for various stack implementations hugetlb_cgroup: fix illegal access to memory drivers/base/memory.c: indicate all memory blocks as removable mm/swapfile.c: move inode_lock out of claim_swapfile
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix for the Hyper-V clocksource driver to make sched clock actually return nanoseconds and not the virtual clock value which increments at 10e7 HZ (100ns)" * tag 'timers-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single bugfix to prevent reference leaks in irq affinity notifiers" * tag 'irq-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix reference leaks on irq affinity notifiers
-
Aneesh Kumar K.V authored
Fix the crash like this: BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000000c3447c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1 ... NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0 LR [c000000000088354] vmemmap_free+0x144/0x320 Call Trace: section_deactivate+0x220/0x240 __remove_pages+0x118/0x170 arch_remove_memory+0x3c/0x150 memunmap_pages+0x1cc/0x2f0 devm_action_release+0x30/0x50 release_nodes+0x2f8/0x3e0 device_release_driver_internal+0x168/0x270 unbind_store+0x130/0x170 drv_attr_store+0x44/0x60 sysfs_kf_write+0x68/0x80 kernfs_fop_write+0x100/0x290 __vfs_write+0x3c/0x70 vfs_write+0xcc/0x240 ksys_write+0x7c/0x140 system_call+0x5c/0x68 The crash is due to NULL dereference at test_bit(idx, ms->usage->subsection_map); due to ms->usage = NULL in pfn_section_valid() With commit d41e2f3b ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after depopulate_section_mem(). This was done so that pfn_page() can work correctly with kernel config that disables SPARSEMEM_VMEMMAP. With that config pfn_to_page does __section_mem_map_addr(__sec) + __pfn; where static inline struct page *__section_mem_map_addr(struct mem_section *section) { unsigned long map = section->section_mem_map; map &= SECTION_MAP_MASK; return (struct page *)map; } Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is used to check the pfn validity (pfn_valid()). Since section_deactivate release mem_section->usage if a section is fully deactivated, pfn_valid() check after a subsection_deactivate cause a kernel crash. static inline int pfn_valid(unsigned long pfn) { ... return early_section(ms) || pfn_section_valid(ms, pfn); } where static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn) { int idx = subsection_map_index(pfn); return test_bit(idx, ms->usage->subsection_map); } Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is freed. For architectures like ppc64 where large pages are used for vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple sections. Hence before a vmemmap mapping page can be freed, the kernel needs to make sure there are no valid sections within that mapping. Clearing the section valid bit before depopulate_section_memap enables this. [aneesh.kumar@linux.ibm.com: add comment] Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com Fixes: d41e2f3b ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Reviewed-by: Baoquan He <bhe@redhat.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Gushchin authored
Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the space for task stacks can be allocated using __vmalloc_node_range(), alloc_pages_node() and kmem_cache_alloc_node(). In the first and the second cases page->mem_cgroup pointer is set, but in the third it's not: memcg membership of a slab page should be determined using the memcg_from_slab_page() function, which looks at page->slab_cache->memcg_params.memcg . In this case, using mod_memcg_page_state() (as in account_kernel_stack()) is incorrect: page->mem_cgroup pointer is NULL even for pages charged to a non-root memory cgroup. It can lead to kernel_stack per-memcg counters permanently showing 0 on some architectures (depending on the configuration). In order to fix it, let's introduce a mod_memcg_obj_state() helper, which takes a pointer to a kernel object as a first argument, uses mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls mod_memcg_state(). It allows to handle all possible configurations (CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without spilling any memcg/kmem specifics into fork.c . Note: This is a special version of the patch created for stable backports. It contains code from the following two patches: - mm: memcg/slab: introduce mem_cgroup_from_obj() - mm: fork: fix kernel_stack memcg stats for various stack implementations [guro@fb.com: introduce mem_cgroup_from_obj()] Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com Fixes: 4d96ba35 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages") Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mina Almasry authored
This appears to be a mistake in commit faced7e0 ("mm: hugetlb controller for cgroups v2"). Essentially that commit does a hugetlb_cgroup_from_counter assuming that page_counter_try_charge has initialized counter. But if that has failed then it seems will not initialize counter, so hugetlb_cgroup_from_counter(counter) ends up pointing to random memory, causing kasan to complain. The solution is to simply use 'h_cg', instead of hugetlb_cgroup_from_counter(counter), since that is a reference to the hugetlb_cgroup anyway. After this change kasan ceases to complain. Fixes: faced7e0 ("mm: hugetlb controller for cgroups v2") Reported-by: syzbot+cac0c4e204952cf449b1@syzkaller.appspotmail.com Signed-off-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Giuseppe Scrivano <gscrivan@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/20200313223920.124230-1-almasrymina@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
We see multiple issues with the implementation/interface to compute whether a memory block can be offlined (exposed via /sys/devices/system/memory/memoryX/removable) and would like to simplify it (remove the implementation). 1. It runs basically lockless. While this might be good for performance, we see possible races with memory offlining that will require at least some sort of locking to fix. 2. Nowadays, more false positives are possible. No arch-specific checks are performed that validate if memory offlining will not be denied right away (and such check will require locking). For example, arm64 won't allow to offline any memory block that was added during boot - which will imply a very high error rate. Other archs have other constraints. 3. The interface is inherently racy. E.g., if a memory block is detected to be removable (and was not a false positive at that time), there is still no guarantee that offlining will actually succeed. So any caller already has to deal with false positives. 4. It is unclear which performance benefit this interface actually provides. The introducing commit 5c755e9f ("memory-hotplug: add sysfs removable attribute for hotplug memory remove") mentioned "A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation." However, no actual performance comparison was included. Known users: - lsmem: Will group memory blocks based on the "removable" property. [1] - chmem: Indirect user. It has a RANGE mode where one can specify removable ranges identified via lsmem to be offlined. However, it also has a "SIZE" mode, which allows a sysadmin to skip the manual "identify removable blocks" step. [2] - powerpc-utils: Uses the "removable" attribute to skip some memory blocks right away when trying to find some to offline+remove. However, with ballooning enabled, it already skips this information completely (because it once resulted in many false negatives). Therefore, the implementation can deal with false positives properly already. [3] According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer driven from userspace via the drmgr command (powerpc-utils). Nowadays it's managed in the kernel - including onlining/offlining of memory blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the affected legacy userspace handling is only active on old kernels. Only very old versions of drmgr on a new kernel (unlikely) might execute slower - totally acceptable. With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not break any user space tool. We implement a very bad heuristic now. Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report "not removable" as before. Original discussion can be found in [4] ("[PATCH RFC v1] mm: is_mem_section_removable() overhaul"). Other users of is_mem_section_removable() will be removed next, so that we can remove is_mem_section_removable() completely. [1] http://man7.org/linux/man-pages/man1/lsmem.1.html [2] http://man7.org/linux/man-pages/man8/chmem.8.html [3] https://github.com/ibm-power-utilities/powerpc-utils [4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com Also, this patch probably fixes a crash reported by Steve. http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.comReported-by: "Scargall, Steve" <steve.scargall@intel.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Fontenot <ndfont@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Karel Zak <kzak@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Naohiro Aota authored
claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in vti6, from Torsten Hilbrich. 2) Fix double free in xfrm_policy_timer, from YueHaibing. 3) NL80211_ATTR_CHANNEL_WIDTH attribute is put with wrong type, from Johannes Berg. 4) Wrong allocation failure check in qlcnic driver, from Xu Wang. 5) Get ks8851-ml IO operations right, for real this time, from Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits) r8169: fix PHY driver check on platforms w/o module softdeps net: ks8851-ml: Fix IO operations, again mlxsw: spectrum_mr: Fix list iteration in error path qlcnic: Fix bad kzalloc null test mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX mac80211: mark station unauthorized before key removal mac80211: Check port authorization in the ieee80211_tx_dequeue() case cfg80211: Do not warn on same channel at the end of CSA mac80211: drop data frames without key on encrypted links ieee80211: fix HE SPR size calculation nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type xfrm: policy: Fix doulbe free in xfrm_policy_timer bpf: Explicitly memset some bpf info structures declared on the stack bpf: Explicitly memset the bpf_attr structure bpf: Sanitize the bpf_struct_ops tcp-cc name vti6: Fix memory leak of skb if input policy check fails esp: remove the skb from the chain when it's enqueued in cryptd_wq ipv6: xfrm6_tunnel.c: Use built-in RCU list checking xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire xfrm: fix uctx len check in verify_sec_ctx_len ...
-
- 28 Mar, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Three more driver bugfixes, and two doc improvements fixing build warnings while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: pca-platform: Use platform_irq_get_optional i2c: st: fix missing struct parameter description i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status() i2c: fix a doc warning i2c: hix5hd2: add missed clk_disable_unprepare in remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two small fixes: one in drivers (qla2xxx), and one in the core (sd) to try to cope with USB enclosures that silently change reported parameters" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Fix optimal I/O size for devices that change reported values scsi: qla2xxx: Fix I/Os being passed down when FC device is being deleted
-
Chris Packham authored
The interrupt is not required so use platform_irq_get_optional() to avoid error messages like i2c-pca-platform 22080000.i2c: IRQ index 0 not found Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Alain Volmat authored
Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-