Add qca8k side support for mgmt read/write in Ethernet packet.
qca8k supports some specially crafted Ethernet packet that can be used
for mgmt read/write instead of the legacy method uart/internal mdio.
This add support for the qca8k side to craft the packet and enqueue it.
Each port and the qca8k_priv have a special struct to put data in it.
The completion API is used to wait for the packet to be received back
with the requested data.

The various steps are:
1. Craft the special packet with the qca hdr set to mgmt read/write
   mode.
2. Set the lock in the dedicated mgmt struct.
3. Increment the seq number and set it in the mgmt pkt
4. Reinit the completion.
5. Enqueue the packet.
6. Wait the packet to be received.
7. Use the data set by the tagger to complete the mdio operation.

If the completion timeouts or the ack value is not true, the legacy
mdio way is used.

It has to be considered that in the initial setup mdio is still used and
mdio is still used until DSA is ready to accept and tag packet.

tag_proto_connect() is used to fill the required handler for the tagger
to correctly parse and elaborate the special Ethernet mdio packet.

Locking is added to qca8k_master_change() to make sure no mgmt Ethernet
are in progress.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MDIO/MIB Ethernet require the master port and the tagger availabale to
correctly work. Use the new api master_state_change to track when master
is operational or not and set a bool in qca8k_priv.
We cache the first cached master available and we check if other cpu
port are operational when the cached one goes down.
This cached master will later be used by mdio read/write and mib request to
correctly use the working function.

qca8k implementation for MDIO/MIB Ethernet is bad. CPU port0 is the only
one that answers with the ack packet or sends MIB Ethernet packets. For
this reason the master_state_change ignore CPU port6 and only checks
CPU port0 if it's operational and enables this mode.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add connect/disconnect helper to assign private struct to the DSA switch.
Add support for Ethernet mgmt and MIB if the DSA driver provide an handler
to correctly parse and elaborate the data.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add struct to correctly parse a mib Ethernet packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add all the required define to prepare support for mgmt read/write in
Ethernet packet. Any packet of this type has to be dropped as the only
use of these special packet is receive ack for an mgmt write request or
receive data for an mgmt read request.
A struct is used that emulates the Ethernet header but is used for a
different purpose.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ethernet MDIO packets are non-standard and DSA master expects the first
6 octets to be the MAC DA. To address these kind of packet, enable
promisc_on_master flag for the tagger.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move tag_qca define to include dir linux/dsa as the qca8k require access
to the tagger define to support in-band mdio read/write using ethernet
packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert driver to FIELD macro to drop redundant define.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order for switch driver to be able to make simple and reliable use of
the master tracking operations, they must also be notified of the
initial state of the DSA master, not just of the changes. This is
because they might enable certain features only during the time when
they know that the DSA master is up and running.

Therefore, this change explicitly checks the state of the DSA master
under the same rtnl_mutex as we were holding during the
dsa_master_setup() and dsa_master_teardown() call. The idea being that
if the DSA master became operational in between the moment in which it
became a DSA master (dsa_master_setup set dev->dsa_ptr) and the moment
when we checked for the master being up, there is a chance that we
would emit a ->master_state_change() call with no actual state change.
We need to avoid that by serializing the concurrent netdevice event with
us. If the netdevice event started before, we force it to finish before
we begin, because we take rtnl_lock before making netdev_uses_dsa()
return true. So we also handle that early event and do nothing on it.
Similarly, if the dev_open() attempt is concurrent with us, it will
attempt to take the rtnl_mutex, but we're holding it. We'll see that
the master flag IFF_UP isn't set, then when we release the rtnl_mutex
we'll process the NETDEV_UP notifier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Certain drivers may need to send management traffic to the switch for
things like register access, FDB dump, etc, to accelerate what their
slow bus (SPI, I2C, MDIO) can already do.

Ethernet is faster (especially in bulk transactions) but is also more
unreliable, since the user may decide to bring the DSA master down (or
not bring it up), therefore severing the link between the host and the
attached switch.

Drivers needing Ethernet-based register access already should have
fallback logic to the slow bus if the Ethernet method fails, but that
fallback may be based on a timeout, and the I/O to the switch may slow
down to a halt if the master is down, because every Ethernet packet will
have to time out. The driver also doesn't have the option to turn off
Ethernet-based I/O momentarily, because it wouldn't know when to turn it
back on.

Which is where this change comes in. By tracking NETDEV_CHANGE,
NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know
the exact interval of time during which this interface is reliably
available for traffic. Provide this information to switches so they can
use it as they wish.

An helper is added dsa_port_master_is_operational() to check if a master
port is operational.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ideally the size would depend on the link speed, but the recycle
ring is created when the interface is brought up before the driver
knows the link speed. So size it for the maximum speed of a given NIC.
PowerPC is only supported on SFN7xxx and SFN8xxx NICs.

With this patch on a 40G NIC the number of calls to alloc_pages and
friends went down from about 18% to under 2%.
On a 10G NIC the number of calls to alloc_pages and friends went down
from about 15% to 0 (perf did not capture any calls during the 60
second test).
On a 100G NIC the number of calls to alloc_pages and friends went down
from about 23% to 4%.
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220131111054.cp4f6foyinaarwbn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

According to Realtek RTL8168h supports the same L1.2 control as RTL8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4784d5ce-38ac-046a-cbfa-5fdd9773f820@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There's not reason SO_MARK would be allowed via setsockopt()
and not via cmsg, let's keep the two consistent. See
commit 079925cc ("net: allow SO_MARK with CAP_NET_RAW")
for justification why NET_RAW -> SO_MARK is safe.
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220131233357.52964-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Horatiu Vultur says:

====================
net: lan966x: Add PTP Hardward Clock support

Add support for PTP Hardware Clock (PHC) for lan966x. The switch supports
both PTP 1-step and 2-step modes.

v1->v2:
- fix commit messages
- reduce the scope of the lock ptp_lock inside the function
  lan966x_ptp_hwtstamp_set
- the rx timestamping is always enabled for all packages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the function get_ts_info in ethtool_ops which is needed to get
the HW capabilities for timestamping.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When doing 2-step timestamping the HW will generate an interrupt when it
managed to timestamp a frame. It is the SW responsibility to read it
from the FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update both the extraction and injection to do timestamping of the
frames. The extraction is always doing the timestamping while for
injection is doing the timestamping only if it is configured.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the ioctl callbacks SIOCSHWTSTAMP and SIOCGHWTSTAMP to allow
to configure the ports to enable/disable timestamping for TX. The RX
timestamping is always enabled. The HW is capable to run both 1-step
timestamping and 2-step timestamping.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lan966x has 3 PHC. Enable each of them, for now all the
timestamping is happening on the first PHC.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the registers that will be used to configure the PHC in the HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend dt-bindings for lan966x with ptp interrupt. This is generated
when doing 2-step timestamping and the timestamp can be read from the
FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Run sysctl in quiet mode. Echoing the modified sysctl doesn't bring any
useful information.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All callers of fib_rule6_test_match_n_redirect() and
fib_rule4_test_match_n_redirect() pass a third argument containing a
description of the test being run. Instead of ignoring this argument,
let's use it for logging instead of printing a truncated version of the
command.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fib_rule6_del_by_pref() and fib_rule4_del_by_pref() functions use
an uninitialised $TABLE variable. They should use $RTABLE instead.
This doesn't alter the result of the test, as it just makes the grep
command less specific (but since the script always uses the same table
number, that doesn't really matter).

Let's fix it anyway and, while there, specify the filtering parameters
directly in 'ip -X rule show' to avoid the extra grep command entirely.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let's restrict the scope of these variables to avoid possible
interferences.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

-queue

Tony Nguyen says:

====================
10GbE Intel Wired LAN Driver Updates 2022-01-31

Alexander Lobakin says:

This is an interpolation of [0] to other Intel Ethernet drivers
(and is (re)based on its code).
The main aim is to keep XDP metadata not only in case with
build_skb(), but also when we do napi_alloc_skb() + memcpy().

All Intel drivers suffers from the same here:
 - metadata gets lost on XDP_PASS in legacy-rx;
 - excessive headroom allocation on XSK Rx to skbs;
 - metadata gets lost on XSK Rx to skbs.

Those get especially actual in XDP Hints upcoming.
I couldn't have addressed the first one for all Intel drivers due to
that they don't reserve any headroom for now in legacy-rx mode even
with XDP enabled. This is hugely wrong, but requires quite a bunch
of work and a separate series. Luckily, ice doesn't suffer from
that.
igc has 1 and 3 already fixed in [0].

[0] https://lore.kernel.org/netdev/163700856423.565980.10162564921347693758.stgit@firesoul
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sh_eth_{suspend|resume}() initialize their local variable 'ret' to 0 but
this value is never really used, thus we can kill those intializers...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/f09d7c64-4a2b-6973-09a4-10d759ed0df4@omp.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

By profiling, discovered that ena device driver allocates skb by
build_skb() and frees by napi_skb_cache_put(). Because the driver
does not use napi skb cache in allocation path, napi skb cache is
periodically filled and flushed. This is waste of napi skb cache.

As ena_alloc_skb() is called only in napi, Use napi_build_skb()
and napi_alloc_skb() when allocating skb.

This patch was tested on aws a1.metal instance.

[ jwiedmann.dev@gmail.com: Use napi_alloc_skb() instead of
  netdev_alloc_skb_ip_align() to keep things consistent. ]
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/YfUAkA9BhyOJRT4B@ip-172-31-19-208.ap-northeast-1.compute.internalSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change qed_mcp_cmd() to use msleep() (by setting QED_MB_FLAG_CAN_SLEEP
flag) and add new nosleep() version of the api. These api are used to
issue cmds to management fw and the change affects how driver
behaves while waiting for a response/resource.

All sleepable callers of the existing api now use msleep() version. For
non-sleepable callers, the new nosleep() version is explicitly used.
Signed-off-by: Venkata Sudheer Kumar Bhavaraju <vbhavaraju@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220131005235.1647881-1-vbhavaraju@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().

Fixes: d0bcacd0 ("ixgbe: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: d0bcacd0 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

To not dereference bi->xdp each time in ixgbe_construct_skb_zc(),
pass bi->xdp as an argument instead of bi. We can also call
xsk_buff_free() outside of the function as well as assign bi->xdp
to NULL, which seems to make it closer to its name.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().

Fixes: fc9df2a0 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ice_construct_skb().

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ice_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In "legacy-rx" mode represented by ice_construct_skb(), we can
still use XDP (and XDP metadata), but after XDP_PASS the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
Point net_prefetch() to xdp->data_meta instead of data. This won't
change anything when the meta is not here, but will save some cache
misses otherwise.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().

Fixes: 0a714186 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: 0a714186 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Haiyang Zhang says:

====================
net: mana: Add XDP counters, reuse dropped pages

Add drop, tx counters for XDP.
Reuse dropped pages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Reuse the dropped page in RX path to save page allocation
overhead.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>