- 05 Jun, 2023 8 commits
-
-
Daniele Ceraolo Spurio authored
On MTL, for obvious reasons, HuC is only available on the media tile. We already disable SW support for HuC on the root gt due to the absence of VCS engines, but we also need to update the getparam to point to the HuC struct in the media GT. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-7-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
The full authentication via the GSC requires an heci packet submission to the GSC FW via the GSC CS. The GSC has new PXP command for this (literally called NEW_HUC_AUTH). The intel_huc_auth function is also updated to handle both authentication types. v2: check that the GuC auth for clear media has completed before proceding with the full auth v3: use a define for the object size (Alan) Signed-off-by:Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531235415.1467475-6-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
Before we add the second step of the MTL HuC auth (via GSC), we need to have the ability to differentiate between them. To do so, the huc authentication check is duplicated for GuC and GSC auth, with GSC-enabled binaries being considered fully authenticated only after the GSC auth step. To report the difference between the 2 auth steps, a new case is added to the HuC getparam. This way, the clear media driver can start submitting before full auth, as partial auth is enough for those workloads. v2: fix authentication status check for DG2 v3: add a better comment at the top of the HuC file to explain the different approaches to load and auth (John) v4: update call to intel_huc_is_authenticated in the pxp code to check for GSC authentication v5: drop references to meu and esclamation mark in huc_auth print (John) Signed-off-by: -
Daniele Ceraolo Spurio authored
In the previous patch we extracted the offset of the legacy-style HuC binary located within the GSC-enabled blob, so now we can use that to load the HuC via DMA if the fuse is set that way. Note that we now need to differentiate between "GSC-enabled binary" and "loaded by GSC", so the former case has been renamed to "has GSC headers" for clarity, while the latter is now based on the fuse instead of the binary format. This way, all the legacy load paths are automatically taken (including the auth by GuC) without having to implement further code changes. v2: s/is_meu_binary/has_gsc_headers/, clearer logs (John) v3: split check for GSC access, better comments (John) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The new binaries that support the 2-step authentication contain the legacy-style binary, which we can use for loading the HuC via DMA. To find out where this is located in the image, we need to parse the manifest of the GSC-enabled HuC binary. The manifest consist of a partition header followed by entries, one of which contains the offset we're looking for. Note that the DG2 GSC binary contains entries with the same names, but it doesn't contain a full legacy binary, so we need to skip assigning the dma offset in that case (which we can do by checking the ccs). Also, since we're now parsing the entries, we can extract the HuC version that way instead of using hardcoded offsets. Note that the GSC binary uses the same structures in its binary header, so they've been added in their own header file. v2: fix structure names to match meu defines (s/CPT/CPD/), update commit message, check ccs validity, drop old version location defines. v3: drop references to the MEU tool to reduce confusion, fix log (John) v4: fix log for real (John) Signed-off-by: -
Daniele Ceraolo Spurio authored
Now that each FW has its own reserved area, we can keep them always pinned and skip the pin/unpin dance on reset. This will make things easier for the 2-step HuC authentication, which requires the FW to be pinned in GGTT after the xfer is completed. Since the vma is now valid for a long time and not just for the quick pin-load-unpin dance, the name "dummy" is no longer appropriare and has been replaced with vma_res. All the functions have also been updated to operate on vma_res for consistency. Given that we pin the vma behind the allocator's back (which is ok because we do the pinning in an area that was previously reserved for thus purpose), we do need to explicitly re-pin on resume because the automated helper won't cover us. v2: better comments and commit message, s/dummy/vma_res/ Signed-off-by:
-
Tvrtko Ursulin authored
For conflict avoidance we need the following commit: c9a9f18d drm/i915/huc: use const struct bus_type pointers Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Tejas Upadhyay authored
For mtl, workaround suggests that, SW insert a dummy PIPE_CONTROL prior to PIPE_CONTROL which contains a post sync: Timestamp or Write Immediate. Bspec: 72197 V5: - Remove ret variable - Andi V4: - Update commit message, avoid returing cs - Andi/Matt V3: - Wrap dummy pipe control stuff in API - Andi V2: - Fix kernel test robot warnings Closes: https://lore.kernel.org/oe-kbuild-all/202305121525.3EWdGoBY-lkp@intel.com/Signed-off-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
- 02 Jun, 2023 5 commits
-
-
Nathan Chancellor authored
When building ARCH=i386 allmodconfig, the following warning occurs: In file included from include/linux/device.h:15, from include/linux/node.h:18, from include/linux/cpu.h:17, from include/linux/static_call.h:135, from arch/x86/include/asm/perf_event.h:5, from include/linux/perf_event.h:25, from drivers/gpu/drm/i915/i915_pmu.h:11, from drivers/gpu/drm/i915/gt/intel_engine_types.h:21, from drivers/gpu/drm/i915/gt/intel_context_types.h:18, from drivers/gpu/drm/i915/gem/i915_gem_context_types.h:20, from drivers/gpu/drm/i915/i915_request.h:34, from drivers/gpu/drm/i915/i915_active.h:13, from drivers/gpu/drm/i915/gt/intel_context.h:13, from drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:8: drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c: In function 'gsccs_send_message': include/drm/drm_print.h:456:39: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] 456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__) | ^~~~~~~~ include/linux/dev_printk.h:110:30: note: in definition of macro 'dev_printk_index_wrap' 110 | _p_func(dev, fmt, ##__VA_ARGS__); \ | ^~~ include/linux/dev_printk.h:146:61: note: in expansion of macro 'dev_fmt' 146 | dev_printk_index_wrap(_dev_warn, KERN_WARNING, dev, dev_fmt(fmt), ##__VA_ARGS__) | ^~~~~~~ include/drm/drm_print.h:456:9: note: in expansion of macro 'dev_warn' 456 | dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__) | ^~~~ include/drm/drm_print.h:466:9: note: in expansion of macro '__drm_printk' 466 | __drm_printk((drm), warn,, fmt, ##__VA_ARGS__) | ^~~~~~~~~~~~ drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.c:146:17: note: in expansion of macro 'drm_warn' 146 | drm_warn(&i915->drm, "caller with insufficient PXP reply size %u (%ld)\n", | ^~~~~~~~ cc1: all warnings being treated as errors Use the '%zu' format specifier, as the variable is a 'size_t'. Fixes: dc9ac125 ("drm/i915/pxp: Add GSC-CS backend to send GSC fw messages") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530-i915-pxp-size_t-wformat-v1-1-9631081e2e5b@kernel.org
-
Andrzej Hajda authored
In case system is short on mappable memory (256MB on SmallBar) allocation of two 1GB buffers will fail. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8300Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.5: UAPI Changes: Cross-subsystem Changes: * fbdev: * Add Kconfig options and initializer macros for file I/O, convert DRM fbdev emulation Core Changes: * Unify handling of struct file_operations.show_fdinfo * Use .probe in all i2c code (interface cleanup) * TTM: * Remove unused code Driver Changes: * amdgpu: * Use shared show_fdinfo code * Fix building without procfs * bridge: * display-conenctor: Add support for external power supply * samsung-dsim: Fix enabling; Support variable clocking * tc358767: Fixes * ti-sn65dsi83: Fix enabling * msm: * Use shared show_fdinfo code * msxfb: * Add support for i.MX93 LCDIF * panel: * Add support for Ampire AM-800480L1TMQW-T00H plus DT bindings * panel-edp: Convert .remove to return void * stm: * dsi: Use devm_ helper * ltdc: Fix potential invalid pointer deref Signed-off-by:Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230601112246.GA10882@linux-uq9g
-
Nathan Chancellor authored
When building with clang's -Wincompatible-function-pointer-types-strict, the following warnings occur: drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:102:23: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, dma_addr_t, u64, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, unsigned int, unsigned long long, unsigned int, unsigned int)') from 'void (struct i915_address_space *, dma_addr_t, u64, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, unsigned int, unsigned long long, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.insert_page = gmch_ggtt_insert_page; ^ ~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt_gmch.c:103:26: error: incompatible function pointer types assigning to 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, u32)' (aka 'void (*)(struct i915_address_space *, struct i915_vma_resource *, unsigned int, unsigned int)') from 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, u32)' (aka 'void (struct i915_address_space *, struct i915_vma_resource *, enum i915_cache_level, unsigned int)') [-Werror, -Wincompatible-function-pointer-types-strict] ggtt->vm.insert_entries = gmch_ggtt_insert_entries; ^ ~~~~~~~~~~~~~~~~~~~~~~~~ 2 errors generated. The warning is pointing out that while 'enum i915_cache_level' and 'unsigned int' are ABI compatible, these indirect calls will fail clang's kernel Control Flow Integrity (kCFI) checks, as the callback's signature does not exactly match the prototype's signature. To fix this, replace the cache_level parameter with pat_index, as was done in other places within i915 where there is no difference between cache_level and pat_index on certain generations. Fixes: 9275277d ("drm/i915: use pat_index instead of cache_level") Signed-off-by:Fei Yang <fei.yang@intel.com> Signed-off-by:
-
Nathan Chancellor authored
When booting a kernel compiled with CONFIG_CFI_CLANG (kCFI), there is a CFI failure in ggtt_probe_common() when trying to call hsw_pte_encode() via an indirect call: [ 5.030027] CFI failure at ggtt_probe_common+0xd1/0x130 [i915] (target: hsw_pte_encode+0x0/0x30 [i915]; expected type: 0xf5c1d0fc) With kCFI, indirect calls are validated against their expected type versus actual type and failures occur when the two types do not match. clang's -Wincompatible-function-pointer-types-strict can catch this at compile time but it is not enabled for the kernel yet: drivers/gpu/drm/i915/gt/intel_ggtt.c:1155:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = iris_pte_encode; ^ ~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1157:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = hsw_pte_encode; ^ ~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1159:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = byt_pte_encode; ^ ~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1161:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = ivb_pte_encode; ^ ~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gt/intel_ggtt.c:1163:23: error: incompatible function pointer types assigning to 'u64 (*)(dma_addr_t, unsigned int, u32)' (aka 'unsigned long long (*)(unsigned int, unsigned int, unsigned int)') from 'u64 (dma_addr_t, enum i915_cache_level, u32)' (aka 'unsigned long long (unsigned int, enum i915_cache_level, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] ggtt->vm.pte_encode = snb_pte_encode; ^ ~~~~~~~~~~~~~~ 5 errors generated. In this case, the pre-gen8 pte_encode functions have a second parameter type of 'enum i915_cache_level' whereas the function pointer prototype in 'struct i915_address_space' expects a second parameter type of 'unsigned int'. Update the second parameter of the callbacks and the comment above them noting that these statements are still valid, which matches other functions and files, to clear up the kCFI failures at run time. Fixes: 9275277d ("drm/i915: use pat_index instead of cache_level") Signed-off-by:
-
- 01 Jun, 2023 16 commits
-
-
Andi Shyti authored
kernel_context() returns an error pointer. Use pointer-error conversion functions to evaluate its return value, rather than checking for a '0' return. Fixes: eb5c10cb ("drm/i915: Remove I915_USER_PRIORITY_SHIFT") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
Implement dedicated fbdev helpers for framebuffer I/O instead of using DRM's helpers. Use an fbdev generator macro for deferred I/O to create the fbdev callbacks. i915 was the only caller of the DRM helpers, so remove them from the helper module. i915's fbdev emulation is still incomplete as it doesn't implement deferred I/O and damage handling for mmaped pages. v4: * generate deferred-I/O helpers * use initializer macros for fb_ops v2: * use FB_IO_HELPERS options Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-14-tzimmermann@suse.de
-
Thomas Zimmermann authored
Implement dedicated fbdev helpers for framebuffer I/O instead of using DRM's helpers. Use an fbdev generator macro for deferred I/O to create the callbacks. Fbdev-generic was the only caller of the DRM helpers, so remove them from the helper module. v4: * generate deferred-I/O helpers * use initializer macros for fb_ops v2: * use FB_SYS_HELPERS_DEFERRED option Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Msm does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. Msm's fbdev emulation has been incomplete as it didn't implement damage handling. Partilly fix this by implementing damage handling for write and draw operation. It is still missing for mmaped pages. v4: * use initializer macros for struct fb_ops * partially support damage handling v2: * use FB_SYS_HELPERS option Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Thomas Zimmermann authored
Export drm_fb_helper_damage() and drm_fb_helper_damage_range(), which handle damage areas for fbdev emulation. This is a temporary export that allows to move the DRM I/O helpers for fbdev into drivers. Only fbdev-generic and i915 need them. Both will be updated to implement damage handling by themselves and the exported functions will be removed. v4: * update interfaces Signed-off-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Tegra does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Omapdrm does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Fbdev-dma does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_SYS_HELPERS option Signed-off-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Radeon does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Gma500 does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Exynos does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v3: * don't reorder Makefile rules (Sam) v2: * use FB_IO_HELPERS option Signed-off-by:
-
Thomas Zimmermann authored
Use the regular fbdev helpers for framebuffer I/O instead of DRM's helpers. Armada does not use damage handling, so DRM's fbdev helpers are mere wrappers around the fbdev code. By using fbdev helpers directly within each DRM fbdev emulation, we can eventually remove DRM's wrapper functions entirely. v4: * use initializer macros for struct fb_ops v2: * use FB_IO_HELPERS option Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers in I/O and system memory, add macros that set struct fb_ops to the respective callback functions. For deferred I/O, add macros that generate callback functions with damage handling. Add initializer macros that set struct fb_ops to the generated callbacks. These macros can remove a lot boilerplate code from fbdev drivers. The drivers are supposed to use the macro that is required for its framebuffer. Each macro is split into smaller helpers, so that drivers with non-standard callbacks can pick and customize callbacks as needed. There are individual helper macros for read/write, mmap and drawing. v5: * fix whitespace errors (Jingfeng) Signed-off-by:
-
Thomas Zimmermann authored
Many fbdev drivers use the same set of fb_ops helpers. Add Kconfig options to select them at once. This will help with making DRM's fbdev emulation code more modular, but can also be used to simplify fbdev's driver configs. v3: * fix select statement (Jingfeng) Signed-off-by:
-
Thomas Zimmermann authored
Backmerging from drm-next to get commit e24e6d69 ("drm/i915/display: Implement fb_mmap callback function"). Signed-off-by:
-
Fabio Estevam authored
Use port-base reference for port@1. This fixes the following schema warning: imx8mp-dhcom-pdk3.dtb: dsi@32e60000: ports:port@1:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected) From schema: Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml Fixes: 1f0d40d8 ("dt-bindings: bridge: Convert Samsung MIPI DSIM bridge to yaml") Signed-off-by:Fabio Estevam <festevam@denx.de> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [narmstrong: removed line break between tags] Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230531224407.1611952-1-festevam@gmail.com
-
- 31 May, 2023 9 commits
-
-
Ashutosh Dixit authored
No functional changes but we can remove some unsightly index computation and read/write functions if we convert the PMU sample array from a one-dimensional to a two-dimensional array. v2: Retain read/store helpers (Tvrtko) Suggested-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230524215629.97920-3-ashutosh.dixit@intel.com
-
Ashutosh Dixit authored
pmu_needs_timer() keeps the timer running even when GT is parked, ostensibly to sample requested/actual frequencies. However frequency_sample() has the following: /* Report 0/0 (actual/requested) frequency while parked. */ if (!intel_gt_pm_get_if_awake(gt)) return; The above code prevents frequencies to be sampled while the GT is parked. So we might as well turn off the sampling timer itself in this case and save CPU cycles/power. v2: Instead of turning freq bits off, return false, since no counters will run after this change when GT is parked (Tvrtko) v3: Remove gpu_active argument of pmu_needs_timer (Andrzej) Signed-off-by: -
Ashutosh Dixit authored
Clearing out report id and timestamp as means to detect unlanded reports only works if report size is power of 2. That is, only when report size is a sub-multiple of the OA buffer size can we be certain that reports will land at the same place each time in the OA buffer (after rewind). If report size is not a power of 2, we need to zero out the entire report to be able to detect unlanded reports reliably. v2: Add Fixes tag (Umesh) Fixes: 1cc064dc ("drm/i915/perf: Add support for OA media units") Reviewed-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We've already switched to new HXG definitions some time ago, drop legacy CTB definitions to avoid mistakes. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Piotr Piórkowski <piotr.piorkowski@intel.com> Signed-off-by:
-
Ma Jun authored
Remove redundant assignment code for ttm->caching as it's overwritten just a few lines later. v2: - Update the commit message. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dmitry Baryshkov authored
On some devices the +5V Power pin of the HDMI connector and/or the ESD protection logic is powered on by a separate regulator. Instead of declaring this regulator as always-on, make hdmi-connector support the additional hdmi-pwr supply. Signed-off-by:
-
Dmitry Baryshkov authored
In preparation to adding support for the hdmi_pwr supply, rename dp_pwr structure field to the generic connector_pwr. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dmitry Baryshkov authored
Follow the dp-connector example and add hdmi-pwr supply to drive the 5V pin of the HDMI connector (together with some simple glue logic possibly attached to the connector). Reviewed-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. panel_edp_remove() always returned zero, so convert it to return void without any loss and then just drop the return from panel_edp_platform_remove(). Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 30 May, 2023 2 commits
-
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Martyn Welch <martyn.welch@collabora.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
-
Michal Wajdeczko authored
For easier debug of any unexpected error responses from GuC that might be related to non-blocking fast requests, track action code (and stack if under DEBUG_GUC config) for every H2G request. Signed-off-by:
-
