Skip to content

L
linux
Switch branch/tag
  1. 22 Jun, 2019 15 commits
    • Tony Lindgren's avatar
      mfd: twl6040: Fix device init errors for ACCCTL register · 59e1b23b
      Tony Lindgren authored 
      [ Upstream commit 48171d0e ]

I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero:

twl6040 0-004b: Failed to write 2d = 19: -121

And then any following register access will produce errors.

There 2d offset above is register ACCCTL that gets written on twl6040
powerup. With error checking added to the related regcache_sync() call,
the -EREMOTEIO error is reproducable on twl6040 powerup at least
duovero.

To fix the error, we need to wait until twl6040 is accessible after the
powerup. Based on tests on omap4 duovero, we need to wait over 8ms after
powerup before register write will complete without failures. Let's also
make sure we warn about possible errors too.

Note that we have twl6040_patch[] reg_sequence with the ACCCTL register
configuration and regcache_sync() will write the new value to ACCCTL.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      59e1b23b
    • Binbin Wu's avatar
      mfd: intel-lpss: Set the device in reset state when init · 381a9685
      Binbin Wu authored 
      [ Upstream commit dad06532 ]

In virtualized setup, when system reboots due to warm
reset interrupt storm is seen.

Call Trace:
<IRQ>
dump_stack+0x70/0xa5
__report_bad_irq+0x2e/0xc0
note_interrupt+0x248/0x290
? add_interrupt_randomness+0x30/0x220
handle_irq_event_percpu+0x54/0x80
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x91/0x150
handle_irq+0x108/0x180
do_IRQ+0x52/0xf0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0033:0x76fc2cfabc1d
Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e
94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18
<48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04
24
RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda
RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce
RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010
RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0
R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0
R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414
handlers:
[<000000000d3fa913>] idma64_irq
Disabling IRQ #27

To avoid interrupt storm, set the device in reset state
before bringing out the device from reset state.

Changelog v2:
- correct the subject line by adding "mfd: "
Signed-off-by: default avatarBinbin Wu <binbin.wu@intel.com>
Acked-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      381a9685
    • Daniel Gomez's avatar
      mfd: tps65912-spi: Add missing of table registration · ef0bdc8d
      Daniel Gomez authored 
      [ Upstream commit 9e364e87 ]

MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT
OF mathing mechanism and register it.

Before this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          spi:tps65912

After this patch:
modinfo drivers/mfd/tps65912-spi.ko | grep alias
alias:          of:N*T*Cti,tps65912C*
alias:          of:N*T*Cti,tps65912
alias:          spi:tps65912
Reported-by: default avatarJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: default avatarDaniel Gomez <dagmcr@gmail.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      ef0bdc8d
    • Amit Kucheria's avatar
      drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER · bad5f0b7
      Amit Kucheria authored 
      [ Upstream commit fc7d18cf ]

We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.
Signed-off-by: default avatarAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: default avatarEduardo Valentin <edubezval@gmail.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      bad5f0b7
    • Cyrill Gorcunov's avatar
      kernel/sys.c: prctl: fix false positive in validate_prctl_map() · e74cb9e0
      Cyrill Gorcunov authored 
      [ Upstream commit a9e73998 ]

While validating new map we require the @start_data to be strictly less
than @end_data, which is fine for regular applications (this is why this
nit didn't trigger for that long).  These members are set from executable
loaders such as elf handers, still it is pretty valid to have a loadable
data section with zero size in file, in such case the start_data is equal
to end_data once kernel loader finishes.

As a result when we're trying to restore such programs the procedure fails
and the kernel returns -EINVAL.  From the image dump of a program:

 | "mm_start_code": "0x400000",
 | "mm_end_code": "0x8f5fb4",
 | "mm_start_data": "0xf1bfb0",
 | "mm_end_data": "0xf1bfb0",

Thus we need to change validate_prctl_map from strictly less to less or
equal operator use.

Link: http://lkml.kernel.org/r/20190408143554.GY1421@uranus.lan
Fixes: f606b77f ("prctl: PR_SET_MM -- introduce PR_SET_MM_MAP operation")
Signed-off-by: default avatarCyrill Gorcunov <gorcunov@gmail.com>
Cc: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      e74cb9e0
    • Qian Cai's avatar
      mm/slab.c: fix an infinite loop in leaks_show() · 5dd33451
      Qian Cai authored 
      [ Upstream commit 745e1014 ]

"cat /proc/slab_allocators" could hang forever on SMP machines with
kmemleak or object debugging enabled due to other CPUs running do_drain()
will keep making kmemleak_object or debug_objects_cache dirty and unable
to escape the first loop in leaks_show(),

do {
	set_store_user_clean(cachep);
	drain_cpu_caches(cachep);
	...

} while (!is_store_user_clean(cachep));

For example,

do_drain
  slabs_destroy
    slab_destroy
      kmem_cache_free
        __cache_free
          ___cache_free
            kmemleak_free_recursive
              delete_object_full
                __delete_object
                  put_object
                    free_object_rcu
                      kmem_cache_free
                        cache_free_debugcheck --> dirty kmemleak_object

One approach is to check cachep->name and skip both kmemleak_object and
debug_objects_cache in leaks_show().  The other is to set store_user_clean
after drain_cpu_caches() which leaves a small window between
drain_cpu_caches() and set_store_user_clean() where per-CPU caches could
be dirty again lead to slightly wrong information has been stored but
could also speed up things significantly which sounds like a good
compromise.  For example,

 # cat /proc/slab_allocators
 0m42.778s # 1st approach
 0m0.737s  # 2nd approach

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/20190411032635.10325-1-cai@lca.pw
Fixes: d31676df ("mm/slab: alternative implementation for DEBUG_SLAB_LEAK")
Signed-off-by: default avatarQian Cai <cai@lca.pw>
Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      5dd33451
    • Yue Hu's avatar
      mm/cma_debug.c: fix the break condition in cma_maxchunk_get() · aab90fdb
      Yue Hu authored 
      [ Upstream commit f0fd5050 ]

If not find zero bit in find_next_zero_bit(), it will return the size
parameter passed in, so the start bit should be compared with bitmap_maxno
rather than cma->count.  Although getting maxchunk is working fine due to
zero value of order_per_bit currently, the operation will be stuck if
order_per_bit is set as non-zero.

Link: http://lkml.kernel.org/r/20190319092734.276-1-zbestahu@gmail.comSigned-off-by: default avatarYue Hu <huyue2@yulong.com>
Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      aab90fdb
    • Yue Hu's avatar
      mm/cma.c: fix crash on CMA allocation if bitmap allocation fails · 8f759452
      Yue Hu authored 
      [ Upstream commit 1df3a339 ]

f022d8cb ("mm: cma: Don't crash on allocation if CMA area can't be
activated") fixes the crash issue when activation fails via setting
cma->count as 0, same logic exists if bitmap allocation fails.

Link: http://lkml.kernel.org/r/20190325081309.6004-1-zbestahu@gmail.comSigned-off-by: default avatarYue Hu <huyue2@yulong.com>
Reviewed-by: default avatarAnshuman Khandual <anshuman.khandual@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      8f759452
    • Linxu Fang's avatar
      mem-hotplug: fix node spanned pages when we have a node with only ZONE_MOVABLE · 121100e4
      Linxu Fang authored 
      [ Upstream commit 299c83dc ]

342332e6 ("mm/page_alloc.c: introduce kernelcore=mirror option") and
later patches rewrote the calculation of node spanned pages.

e506b996 ("mem-hotplug: fix node spanned pages when we have a movable
node"), but the current code still has problems,

When we have a node with only zone_movable and the node id is not zero,
the size of node spanned pages is double added.

That's because we have an empty normal zone, and zone_start_pfn or
zone_end_pfn is not between arch_zone_lowest_possible_pfn and
arch_zone_highest_possible_pfn, so we need to use clamp to constrain the
range just like the commit <96e907d1> (bootmem: Reimplement
__absent_pages_in_range() using for_each_mem_pfn_range()).

e.g.
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023fffffff]
Movable zone start for each node
  Node 0: 0x0000000100000000
  Node 1: 0x0000000140000000
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000bffdffff]
  node   0: [mem 0x0000000100000000-0x000000013fffffff]
  node   1: [mem 0x0000000140000000-0x000000023fffffff]

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0x100000    present:0x100000	absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 2097152
node_spanned_pages:2097152
Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K
cma-reserved)

It shows that the current memory of node 1 is double added.
After this patch, the problem is fixed.

node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
node 0 Normal	spanned:0	present:0	absent:0
node 0 Movable	spanned:0x40000 present:0x40000 absent:0
On node 0 totalpages(node_present_pages): 1048446
node_spanned_pages:1310719
node 1 DMA	spanned:0	    present:0		absent:0
node 1 DMA32	spanned:0	    present:0		absent:0
node 1 Normal	spanned:0	    present:0		absent:0
node 1 Movable	spanned:0x100000    present:0x100000	absent:0
On node 1 totalpages(node_present_pages): 1048576
node_spanned_pages:1048576
memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata,
4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K
cma-reserved)

Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.comSigned-off-by: default avatarLinxu Fang <fanglinxu@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      121100e4
    • Mike Kravetz's avatar
      hugetlbfs: on restore reserve error path retain subpool reservation · 4c2e0411
      Mike Kravetz authored 
      [ Upstream commit 0919e1b6 ]

When a huge page is allocated, PagePrivate() is set if the allocation
consumed a reservation.  When freeing a huge page, PagePrivate is checked.
If set, it indicates the reservation should be restored.  PagePrivate
being set at free huge page time mostly happens on error paths.

When huge page reservations are created, a check is made to determine if
the mapping is associated with an explicitly mounted filesystem.  If so,
pages are also reserved within the filesystem.  The default action when
freeing a huge page is to decrement the usage count in any associated
explicitly mounted filesystem.  However, if the reservation is to be
restored the reservation/use count within the filesystem should not be
decrementd.  Otherwise, a subsequent page allocation and free for the same
mapping location will cause the file filesystem usage to go 'negative'.

Filesystem                         Size  Used Avail Use% Mounted on
nodev                              4.0G -4.0M  4.1G    - /opt/hugepool

To fix, when freeing a huge page do not adjust filesystem usage if
PagePrivate() is set to indicate the reservation should be restored.

I did not cc stable as the problem has been around since reserves were
added to hugetlbfs and nobody has noticed.

Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.comSigned-off-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      4c2e0411
    • Arnd Bergmann's avatar
      ARM: prevent tracing IPI_CPU_BACKTRACE · 98e17eda
      Arnd Bergmann authored 
      [ Upstream commit be167862 ]

Patch series "compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING", v3.

This patch (of 11):

When function tracing for IPIs is enabled, we get a warning for an
overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as
triggered by raise_nmi():

  arch/arm/kernel/smp.c: In function 'raise_nmi':
  arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds]
    trace_ipi_raise(target, ipi_types[ipinr]);

This is a correct warning as we actually overflow the array here.

This patch raise_nmi() to call __smp_cross_call() instead of
smp_cross_call(), to avoid calling into ftrace.  For clarification, I'm
also adding a two new code comments describing how this one is special.

The warning appears to have shown up after commit e7273ff4 ("ARM:
8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the
number assignment from '15' to '8', but as far as I can tell has existed
since the IPI tracepoints were first introduced.  If we decide to
backport this patch to stable kernels, we probably need to backport
e7273ff4 as well.

[yamada.masahiro@socionext.com: rebase on v5.1-rc1]
Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com
Fixes: e7273ff4 ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI")
Fixes: 365ec7b1 ("ARM: add IPI tracepoints") # v3.17
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      98e17eda
    • Li Rongqing's avatar
      ipc: prevent lockup on alloc_msg and free_msg · 7b5598c8
      Li Rongqing authored 
      [ Upstream commit d6a2946a ]

msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is
enabled on large memory SMP systems, the pages initialization can take a
long time, if msgctl10 requests a huge block memory, and it will block
rcu scheduler, so release cpu actively.

After adding schedule() in free_msg, free_msg can not be called when
holding spinlock, so adding msg to a tmp list, and free it out of
spinlock

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978
  rcu:     (detected by 11, t=35024 jiffies, g=44237529, q=16542267)
  msgctl10        R  running task    21608 32505   2794 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:__is_insn_slot_addr+0xfb/0x250
  Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48
  RSP: 0018:ffff88bce041f758 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffffffff8471bc50 RCX: ffffffff828a2a57
  RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88bce041f780
  RBP: ffff88bce041f828 R08: ffffed15f3f4c5b3 R09: ffffed15f3f4c5b3
  R10: 0000000000000001 R11: ffffed15f3f4c5b2 R12: 000000318aee9b73
  R13: ffffffff8471bc50 R14: 1ffff1179c083ef0 R15: 1ffff1179c083eec
   kernel_text_address+0xc1/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   create_object+0x380/0x650
   __kmalloc+0x14c/0x2b0
   load_msg+0x38/0x1a0
   do_msgsnd+0x19e/0xcf0
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  rcu:     Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170
  rcu:     (detected by 14, t=35016 jiffies, g=44237525, q=12423063)
  msgctl10        R  running task    21608 32170  32155 0x00000082
  Call Trace:
   preempt_schedule_irq+0x4c/0xb0
   retint_kernel+0x1b/0x2d
  RIP: 0010:lock_acquire+0x4d/0x340
  Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82
  RSP: 0018:ffff88af83417738 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
  RAX: dffffc0000000000 RBX: ffff88bd335f3080 RCX: 0000000000000002
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88bd335f3d64
  RBP: ffff88af83417758 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000001 R11: ffffed13f3f745b2 R12: 0000000000000000
  R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000
   is_bpf_text_address+0x32/0xe0
   kernel_text_address+0xec/0x100
   __kernel_text_address+0xe/0x30
   unwind_get_return_address+0x2f/0x50
   __save_stack_trace+0x92/0x100
   save_stack+0x32/0xb0
   __kasan_slab_free+0x130/0x180
   kfree+0xfa/0x2d0
   free_msg+0x24/0x50
   do_msgrcv+0x508/0xe60
   do_syscall_64+0x117/0x400
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Davidlohr said:
 "So after releasing the lock, the msg rbtree/list is empty and new
  calls will not see those in the newly populated tmp_msg list, and
  therefore they cannot access the delayed msg freeing pointers, which
  is good. Also the fact that the node_cache is now freed before the
  actual messages seems to be harmless as this is wanted for
  msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the
  info->lock the thing is freed anyway so it should not change things"

Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.comSigned-off-by: default avatarLi RongQing <lirongqing@baidu.com>
Signed-off-by: default avatarZhang Yu <zhangyu31@baidu.com>
Reviewed-by: default avatarDavidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      7b5598c8
    • Christian Brauner's avatar
      sysctl: return -EINVAL if val violates minmax · 726f69d3
      Christian Brauner authored 
      [ Upstream commit e260ad01 ]

Currently when userspace gives us a values that overflow e.g.  file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.

This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed.  This commit makes sure to
return EINVAL when an overflow is detected.  Please note that this is a
userspace facing change.

Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.ioSigned-off-by: default avatarChristian Brauner <christian@brauner.io>
Acked-by: default avatarLuis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      726f69d3
    • Hou Tao's avatar
      fs/fat/file.c: issue flush after the writeback of FAT · cc2df631
      Hou Tao authored 
      [ Upstream commit bd8309de ]

fsync() needs to make sure the data & meta-data of file are persistent
after the return of fsync(), even when a power-failure occurs later.  In
the case of fat-fs, the FAT belongs to the meta-data of file, so we need
to issue a flush after the writeback of FAT instead before.

Also bail out early when any stage of fsync fails.

Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.comSigned-off-by: default avatarHou Tao <houtao1@huawei.com>
Acked-by: default avatarOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      cc2df631
    • Kangjie Lu's avatar
      rapidio: fix a NULL pointer dereference when create_workqueue() fails · 506e0ced
      Kangjie Lu authored 
      [ Upstream commit 23015b22 ]

In case create_workqueue fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereference.
Signed-off-by: default avatarKangjie Lu <kjlu@umn.edu>
Acked-by: default avatarAlexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      506e0ced
  3. 17 Jun, 2019 6 commits
  5. 11 Jun, 2019 19 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7