If we're sending an asynchronous layoutreturn, then we need to ensure
that the inode and the super block remain pinned.

Cc: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>

If we're sending an asynchronous layoutcommit, then we need to ensure
that the inode and the super block remain pinned.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>

If we have to do a return-on-close in the delegreturn code, then
we must ensure that the inode and super block remain referenced.

Cc: Peng Tao <tao.peng@primarydata.com>
Cc: stable@vger.kernel.org # 3.17.x
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Peng Tao <tao.peng@primarydata.com>

If we're using NFSv4.1, then we have the ability to let the server know
whether or not we believe that returning a delegation as part of our OPEN
request would be useful.
The feature needs to be used with care, since the client sending the request
doesn't necessarily know how other clients are using that file, and how
they may be affected by the delegation.
For this reason, our initial use of the feature will be to let the server
know when the client believes that handing out a delegation would not be
useful.
The first application for this function is when opening the file using
O_DIRECT.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Anna has essentially been performing the duties of co-maintainer for
the past several years. In recognition of those efforts, I'd like to
add her to the maintainers file.

Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Fix an Oopsable condition when nsm_mon_unmon is called as part of the
namespace cleanup, which now apparently happens after the utsname
has been freed.

Link: http://lkml.kernel.org/r/20150125220604.090121ae@neptune.homeReported-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: stable@vger.kernel.org # 3.18
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

* flexfiles: (53 commits)
  pnfs: lookup new lseg at lseg boundary
  nfs41: .init_read and .init_write can be called with valid pg_lseg
  pnfs: Update documentation on the Layout Drivers
  pnfs/flexfiles: Add the FlexFile Layout Driver
  nfs: count DIO good bytes correctly with mirroring
  nfs41: wait for LAYOUTRETURN before retrying LAYOUTGET
  nfs: add a helper to set NFS_ODIRECT_RESCHED_WRITES to direct writes
  nfs41: add NFS_LAYOUT_RETRY_LAYOUTGET to layout header flags
  nfs/flexfiles: send layoutreturn before freeing lseg
  nfs41: introduce NFS_LAYOUT_RETURN_BEFORE_CLOSE
  nfs41: allow async version layoutreturn
  nfs41: add range to layoutreturn args
  pnfs: allow LD to ask to resend read through pnfs
  nfs: add nfs_pgio_current_mirror helper
  nfs: only reset desc->pg_mirror_idx when mirroring is supported
  nfs41: add a debug warning if we destroy an unempty layout
  pnfs: fail comparison when bucket verifier not set
  nfs: mirroring support for direct io
  nfs: add mirroring support to pgio layer
  pnfs: pass ds_commit_idx through the commit path
  ...

Conflicts:
	fs/nfs/pnfs.c
	fs/nfs/pnfs.h

Before mirroring support was added, the pageio descriptor's pg_lseg was
set to null when an RPC was sent. Because of this, pg_init was called
at lseg boundaries with pg_lseg = NULL, and it could be set to the new
lseg.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

With pgio refactoring in v3.15, .init_read and .init_write can be
called with valid pgio->pg_lseg. file layout was fixed at that time
by commit c6194271 (pnfs: filelayout: support non page aligned
layouts). But the generic helper still needs to be fixed.

Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Peng Tao <tao.peng@primarydata.com>

Signed-off-by: Tom Haynes <loghyr@primarydata.com>

The flexfile layout is a new layout that extends the
file layout. It is currently being drafted as a specification at
https://datatracker.ietf.org/doc/draft-ietf-nfsv4-layout-types/Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Tao Peng <bergwolf@primarydata.com>

When resending to MDS, we might resend multiple mirroring
requests to MDS. As a result, nfs_direct_good_bytes() ends
up counting bytes multiple times, causing application to
get wrong return results in read/write syscalls.

Fix it by tracking start of a dreq and checking the range of
pgio header.

Cc: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Peng Tao <tao.peng@primarydata.com>

Also take care to stop waiting if someone clears retry bit.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>

To allow pnfs LD to ask direct writes to be resend.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>

Use it to indicate that LD wants to retry layoutget. LD can set
it whenever it wants the common pnfs code to return and retry
pnfs path through a new layout.

The bit gets cleared when client does a new layoutget, when client
closes the file (ROC case), or when kernel needs to evict the inode
(non-ROC case).
Signed-off-by: Peng Tao <tao.peng@primarydata.com>

Otherwise we'll lose error tracking information when
encoding layoutreturn.

pnfs_put_lseg may be called from rpc callbacks. So we should not
call pnfs_send_layoutreturn directly because it can deadlock in
the rpc layer.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

When it is set, generic pnfs would try to send layoutreturn right
before last close/delegation_return regard less NFS_LAYOUT_ROC is
set or not. LD can then make sure layoutreturn is always sent
rather than being omitted.

The difference against NFS_LAYOUT_RETURN is that
NFS_LAYOUT_RETURN_BEFORE_CLOSE does not block usage of the layout so
LD can set it and expect generic layer to try pnfs path at the
same time.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

So that callers can specify which range to return.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

If current IO cannot be completed due to some transient errors,
LD may want to ask generic layer to resend the request through
pnfs again.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

Let it return current nfs_pgio_mirror in use depending on pg_mirror_count.
For read, we always use pg_mirrors[0], so this effectively gives us freedom
to use pg_mirror_idx to track the actual mirror to read from through out the
IO stack.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

so that we don't reset desc->pg_mirror_idx for read unnecessarily.
Remove WARN_ON_ONCE from __nfs_pageio_add_request to allow LD to
set pg_mirror_idx for read where pg_mirror_count is always 1.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

So that we can detect the case if some layout segments are still
pinned which is surely a bug that we need to fix.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>

This skips the WARN_ON_ONCE, but doesnt change behavior (the memcmp would
fail).
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

The current mirroring code only notices short writes to the first
mirror. This patch keeps per-mirror byte counts and only considers
a byte to be written once all mirrors report so.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

This patch adds mirrored write support to the pgio layer. The default
is to use one mirror, but pgio callers may define callbacks to change
this to any value up to the (arbitrarily selected) limit of 16.

The basic idea is to break out members of nfs_pageio_descriptor that cannot
be shared between mirrored DSes and put them in a new structure.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

Pass ds_commit_idx through the nfs commit path. It's used to select
the commit bucket when using pnfs and is ignored when not using pnfs.
Several functions had to be changed: nfs_retry_commit,
nfs_mark_request_commit, pnfs_mark_request_commit and the pnfs layout
driver .mark_request_commit functions.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>

'ds_commit_idx' is a better name - it is used to select the right
commit bucket for pnfs.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

This is needed for mirrored DS support, where multuple requests
cover the same range.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

This is needed to support mirrored writes - the first write can't just
trash the lseg, we need to keep it around until all mirrors have
written.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

Add a new operation to nfs_pageio_ops that is called on nfs_pageio_complete.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>

Instead of calling layoutreturn directly, call pnfs_error_mark_layout_for_return
to mark layouts for return and let generic code return layout when
layout segments are freed.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

Conflicts:
	fs/nfs/filelayout/filelayout.c

So that pnfs path is not disabled for ever.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

If current lseg is the last lseg marked with NFS_LSEG_LAYOUTRETURN,
send layoutreturn.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

And if we are to return the same type of layouts, don't bother
sending more layoutgets.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN,
which is an indicator for pnfs_put_lseg() to send layoutreturn,
and also prevents pnfs_update_layout() from using the returning
segments. Once it is set, it never gets cleared.

It also sets proper io failure bit so that pnfs path can be retried
after PNFS_LAYOUTGET_RETRY_TIMEOUT second.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

It allows to specify different iomode to return.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

So that it is possible to return a specific iomode layouts.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

Flexfiles layout would want to use them to report DS IO status.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>

Per RFC 5661 Errata 3208:
| A client MAY always forget its layout state and associated
| layout stateid at any time (See also section 12.5.5.1).
| In such case, the client MUST use a non-layout stateid for the next
| LAYOUTGET operation. This will signal the server that the client has
| no more layouts on the file and its respective layout state can be
| released before issuing a new layout in response to LAYOUTGET.

In order to make such a signal unique to server, client needs to serialize
all layoutgets using non-layout stateid. We implement this by serializing
layoutgets when client has no layout segments at hand.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>