- 16 Oct, 2007 40 commits
-
-
Geert Uytterhoeven authored
Looking at the code flow, `int first' in fb_create_modedb() should be static. [adaplas] Better for 'int first' to be moved outside the loop. [akpm@linux-foundation.org: kill stray semicolon] Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Eugene Teo authored
drivers/video/geode/lxfb_core.c: In function 'lxfb_setup': drivers/video/geode/lxfb_core.c:564: warning: unused variable 'opt' Signed-off-by:
Eugene Teo <eugeneteo@kernel.sg> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
This patch fixes all errors detected by checkpatch.pl script in the pm3fb.c file. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
This patch fixes all errors detected by checkpatch.pl script in the pm2fb.c file. Signed-off-by:
-
Krzysztof Helt authored
This patch adds mtrr support to the tdfxfb driver. It also kills one redundant include and initialization value. [akpm@linux-foundation.org: cleanups] Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support to the tdfxfb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch improves source code mainly by killing redundant variable loads, reducing number of variables, simplifying conditional branches, etc. Signed-off-by:
-
Antonino A. Daplas authored
Reported by: John Lumby <johnlumby@hotmail.com> Some of the entries in the mode database does not match the comments and/or the refresh field. Adjust the timings so they match with both the comments and the refresh rate. Signed-off-by:
-
Adrian Bunk authored
The logo code is not and should not be used by modules. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Adrian Bunk authored
radeon_driver_vblank_do_wait() can become static. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes: - palette setting in 8-bit mode (aka 'funky penguin') - grayscale handling - adds proper barriers in xxx_inb/outb functions Signed-off-by:
-
Krzysztof Helt authored
This patch fixes 3 issues: - transparency handling in tdfxfb - panning with more than 4096 virtual height and acceleration (acceleration with x & y > 4096) - exit paths on errors in tdfxfb_probe() Additionally it sets a FBINFO_READS_FAST flag to use smart blitter scrolling (speed up on tdfxfb). Signed-off-by:
-
Krzysztof Helt authored
This patch contains coding style improvements to the tdfxfb driver (white spaces, indentations, long lines). It also moves fb_ops structure to the end of file, so forward declarations of ops functions are redundant. Signed-off-by:
-
Krzysztof Helt authored
This patch contains coding style improvements to the tridentfb driver (white spaces, indentations, long lines). It also moves fb_ops structure after fb api functions are defined. Signed-off-by:
-
Hans J. Koch authored
This patch adds support for the other three palette formats possible with the PXA LCD controller. This is required on boards where an LCD is connected with all its 18 bits. With this patch, it's possible to use an 8-bit mode with 18-bit palette entries. This used to be possible in 2.4 kernels but disappeared in 2.6. With current kernels, you can only get wrong colours out of an LCD connected this way. Users can choose the palette format by doing something like this in their board definition: static struct pxafb_mach_info my_fb_info = { [...] .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_PDFOR_3, .lccr4 = LCCR4_PAL_FOR_2, [...] }; Signed-off-by:Hans J. Koch <hjk@linutronix.de> Signed-off-by:
-
Raphael Assenat authored
This contains the following changes: * Overlay surface alpha is configured separately from the overlay. This prevents display glitches (configure and fill the overlay first, set alpha to a visible value next) * Added an ioctl for configuring transparency of the Overlay and graphics planes. Blend mode, colorkey mode and global alpha mode are supported. * Added an ioctl for setting the plane order. The overlay plance can be placed over or under the graphics plane. * Added an ioctl for setting and reading chip registers, with mask. * Updated copyright for 2007 [adaplas] * Coding style changes Signed-off-by:
Raphael Assenat <raph@8d.com> Signed-off-by:
-
Ben Dooks authored
When we setup the panel interface whilst configuring the framebuffer, we should ensure the panel interface is not in tristate, in case the bootloader or previous setup has not enabled it. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Ben Dooks authored
Call the fb_set_suspend() over suspend and resume. Signed-off-by:
-
Ben Dooks authored
The suspend and resume code is failing to restore the CRT control register, thus causing the CRT data-path to get changed if the SM501 experiences a reset over suspend. Also move some of the debug messages to dev_dbg() level and ensure that the suspend code does not try and restore anything it did not manage to save. Signed-off-by:
-
Krzysztof Helt authored
This patch adds accelerated fillrect for 24-bit depth. Signed-off-by:
-
Krzysztof Helt authored
This patch: - initializes correctly the Permedia2V chip if it is not initialized by BIOS - puts back clock frequency for the ELSA WINNER board to 100kHz - fixes returned error values from setcolreg() function - uses more general classes for PCI ids Signed-off-by:
-
Krzysztof Helt authored
This patch concentrates on source compacting, simplification and more conformance to kernel coding standards. The major changes: - RD32() and WR() functions are merged into pm2_RD() and pm2_WR() - conditional (with switch()) RDAC functions are separated in two unconditional ones - the conditional pm2fb_block_op() function is merged into pm2fb_fillrect() and pm2fb_copyarea() - WAIT_FIFO() values are corrected Signed-off-by:
-
Krzysztof Helt authored
This patch adds accelerated imageblit function. Signed-off-by:
-
Krzysztof Helt authored
This patch adds usage of MTRR registers and two new options: noaccel and nomtrr. [bunk@kernel.org: make pm3fb_init() static again] Signed-off-by:
-
Krzysztof Helt authored
This patch contains improvements: - it adds ROP_XOR in pm3fb_fillrect() - it conforms closer to coding style - it removes redundant parentheses and setting bits with 0 value - it checks if hardware acceleration is disabled in pm3fb_imageblit - it adds module description Signed-off-by:
-
Krzysztof Helt authored
This patch contains 3 small improvements: - it corrects scan line width calculation in pm3fb_imageblit() - it corrects mmio mapping for big endian machines - it enables panning acceleration constants Signed-off-by:
-
Krzysztof Helt authored
This patch removes the pm3_imageblit() restriction to blit only images with width divisable by 32. Signed-off-by:
-
Krzysztof Helt authored
This patch removes constants named AAA_DISABLE with value 0. They are redudant and misleading ( a |= AAA_DISABLE does nothing and usually should be a &= ~AAA_ENABLE). Signed-off-by:
-
Krzysztof Helt authored
This patch corrects name of the field. Signed-off-by:
-
Krzysztof Helt authored
This patch adds accelerated copyarea and partially accelerated imageblit functions. There is also fixed one register address in the pm3fb.h file. Signed-off-by:
-
Michal Januszewski authored
Documentation for the uvesafb driver. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Signed-off-by:
-
Michal Januszewski authored
uvesafb is an enhanced version of vesafb. It uses a userspace helper (v86d) to execute calls to the x86 Video BIOS functions. The driver is not limited to any specific arch and whether it works on a given arch or not depends on that arch being supported by the userspace daemon. It has been tested on x86_32 and x86_64. A single BIOS call is represented by an instance of the uvesafb_ktask structure. This structure contains a buffer, a completion struct and a uvesafb_task substructure, containing the values of the x86 registers, a flags field and a field indicating the length of the buffer. Whenever a BIOS call is made in the driver, uvesafb_exec() builds a message using the uvesafb_task substructure and the contents of the buffer. This message is then assigned a random ack number and sent to the userspace daemon using the connector interface. The message's sequence number is used as an index for the uvfb_tasks array, which provides a mapping from the messages coming from userspace to the in-kernel uvesafb_ktask structs. The userspace daemon performs the requested operation and sends a reply in the form of a uvesafb_task struct and, optionally, a buffer. The seq and ack numbers in the reply should be exactly the same as those in the request. Each message from userspace is processed by uvesafb_cn_callback() and after passing a few sanity checks leads to the completion of a BIOS call request. Signed-off-by:
-
Michal Januszewski authored
Add connector idx and val constants for v86d and uvesafb. Signed-off-by:
-
Michal Januszewski authored
Change the maximum message size to 16k to allow transfers of VBE data blocks from userspace. Signed-off-by:
-
Michal Januszewski authored
Make fb_destroy_modelist an exported symbol for use in the uvesafb driver. Signed-off-by:
-
Bryan Kadzban authored
drivers/char/rtc.c allowed RTC_PIE_ON ioctls for non-root users, as long as the current interval (set via RTC_IRQP_SET) is <= max_user_freq. Allow RTC_PIE_ON under the same conditions when /dev/rtc* is handled by the rtc subsystem. Signed-off-by:
Bryan Kadzban <bryan@kdzbn.homelinux.net> Acked-by:
Alessandro Zummo <alessandro.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Bryan Kadzban authored
drivers/char/rtc.c exposed a sysctl to change the maximum frequency at which a non-root user could ask the RTC to generate interrupts (via the RTC_IRQP_SET ioctl). This value is no longer available under the new RTC subsystem, so add it to sysfs for each RTC device. Works for me on x86_64 (both reads and writes), using rtc-cmos. Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
David Brownell authored
Some cleanups for the rtc-cmos probe logic: - Claim i/o ports with request_region() not request_resource(), for better coexistence betwen platform and pnp bus glues. - Claim those ports earlier, to help work around procfs bugs (it allows duplicate names, like /proc/driver/rtc). - Fix some glitches in cleanup code, notably a cut'n'paste-o where the i/o port region might not get released during cleanup after a probe fault. And some comment clarifications, including noting that this code must work with PNPBIOS not just PNPACPI.. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Mark Lord authored
Fix readback of RTC alarms on platforms which return -1 in non-hardware-supported RTC alarm fields. To fill in the missing (-1) values, we grab an RTC timestamp along with the RTC alarm value, and use the timestamp fields to populate the missing alarm fields. To counter field-wrap races (since the timestamp and alarm are not read together atomically), we read the RTC timestamp both before and after reading the RTC alarm value, and then check for wrapped fields --> if any have wrapped, we know we have a possible inconsistency, so we loop and reread the timestamp and alarm again. Wrapped fields in the RTC timestamps are an issue because rtc-cmos.c, for example, also gets/uses an RTC timestamp internally while fetching the RTC alarm. If our timestamp here wasn't the same (minutes and higher) as what was used internally there, then we might end up populating the -1 fields with inconsistent values. This fixes readbacks from /sys/class/rtc/rtc?/wakealarm, as well as other code paths which call rtc_read_alarm(). Signed-off-by:
Mark Lord <mlord@pobox.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Scott Wood authored
This patch adds an RTC class driver for the Maxim/Dallas 1374 RTC chip, based on drivers/i2c/chips/ds1374.c. It supports alarm functionality. Signed-off-by:
Scott Wood <scottwood@freescale.com> Acked-by:
-
