- 30 Jul, 2019 14 commits
-
-
Adham Abozaeid authored
remove obtaining_ip from struct wilc_vif Signed-off-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Link: https://lore.kernel.org/r/20190725213125.2810-4-adham.abozaeid@microchip.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adham Abozaeid authored
during_ip_timer is not required after removing the code that disables powersave while the ip is being obtained. Its handler clear_during_ip is also removed Signed-off-by:
-
Adham Abozaeid authored
Driver registers an inetaddr notifier to disable powersave while the ip address is being obtained which should be controlled only by cfg80211. Signed-off-by:
-
Bharath Vedartham authored
For pages that were retained via get_user_pages*(), release those pages via the new put_user_page*() routines, instead of via put_page(). This is part a tree-wide conversion, as described in commit fc1d8e7c ("mm: introduce put_user_page*(), placeholder versions"). Cc: Ira Weiny <ira.weiny@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matt Sickler <Matt.Sickler@daktronics.com> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
Bharath Vedartham <linux.bhar@gmail.com> Link: https://lore.kernel.org/r/1564058658-3551-1-git-send-email-linux.bhar@gmail.comSigned-off-by:
-
Colin Ian King authored
Variable rtstatus is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190726124803.11349-1-colin.king@canonical.comSigned-off-by:
-
Abhinav Jain authored
Added the identifier name in the function prototype definition. Signed-off-by:
Abhinav Jain <crazypsychild@gmail.com> Link: https://lore.kernel.org/r/20190726190146.10875-1-ubuntu@ip-172-31-129-142.ec2.internalSigned-off-by:
-
Michael Straube authored
Function hal_EfusePgCheckAvailableAddr() contains just a single if test. Remove the function and replace the call to it with the if test. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20190725170922.16465-1-straube.linux@gmail.comSigned-off-by:
-
Christophe JAILLET authored
The driver is related to 'pcd8544'. However, 2 strings are about pdc8544 (c and d switched) Fix it. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190725183856.17616-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Sebastian Andrzej Siewior authored
For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use DEFINE_SPINLOCK() and spare the run time initialization Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190704153803.12739-5-bigeasy@linutronix.de Link: https://lore.kernel.org/r/alpine.DEB.2.21.1907261319100.1791@nanos.tec.linutronix.deSigned-off-by:
-
Jerry Lin authored
All uses of old GPIO API have been converted to new API. This item can be removed from TODO file. Signed-off-by:
Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190729023544.GA25930@compute1Signed-off-by:
-
YueHaibing authored
Fix gcc used-but-set-variable warning: drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c: In function vchiq_release_internal: drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2827:16: warning: variable local_entity_uc set but not used [-Wunused-but-set-variable] drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2827:6: warning: variable local_uc set but not used [-Wunused-but-set-variable] Remove the unused variables 'local_entity_uc' and 'local_uc' Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20190727013524.33168-1-yuehaibing@huawei.comSigned-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs//os_dep/osdep_service.c: In function 'rtw_buf_free': drivers/staging/rtl8723bs//os_dep/osdep_service.c:321:6: warning: variable 'ori_len' set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs//os_dep/ioctl_linux.c: In function 'rtw_ioctl_wext_private': drivers/staging/rtl8723bs//os_dep/ioctl_linux.c:4915:6: warning: variable 'num_priv' set but not used [-Wunused-but-set-variable] Reported-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c: In function phy_BB8723b_Config_ParaFile: drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:436:77: warning: variable pszBBRegMpFile set but not used [-Wunused-but-set-variable] It is never used so can be removed. Reported-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: In function halbtc8723b1ant_TdmaDurationAdjustForAcl: drivers/staging/rtl8723bs/hal/HalBtc8723b1Ant.c:1761:7: warning: variable bWifiBusy set but not used [-Wunused-but-set-variable] It is never used so can be removed. Reported-by:
-
- 25 Jul, 2019 26 commits
-
-
J. Bruce Fields authored
Everywhere else in the kernel ESSIDs are printed using %pE, and I can't see why there should be an exception here. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Link: https://lore.kernel.org/r/1562799574-13315-1-git-send-email-bfields@redhat.comSigned-off-by:
-
Hariprasad Kelam authored
Both pu8 and pU1Tmp are of same data type u8. So replace pU1Tmp with u8. Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Link: https://lore.kernel.org/r/20190725032325.GA16473@hari-Inspiron-1545Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function prototype ODM_SetAntenna. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190725052645.2372-9-nishkadg.linux@gmail.comSigned-off-by:
-
Nishka Dasgupta authored
Remove function ODM_TXPowerTrackingCheck as all it does is call odm_TXPowerTrackingCheckCE. Rename odm_TXPowerTrackingCheckCE to ODM_TXPowerTrackingCheck to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function odm_TXPowerTrackingInit as all it does is call odm_TXPowerTrackingThermalMeterInit. Rename odm_TXPowerTrackingThermalMeterInit to odm_TXPowerTrackingInit to maintain compatibility with call sites. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function beacon_timing_control as it does nothing except call rtw_hal_bcn_related_reg_setting. Rename rtw_hal_bcn_related_reg_setting to beacon_timing_control to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function rtl8723b_set_ap_wowlan_cmd as all it does is call rtl8723b_set_AP_FwWoWlanRelated_cmd. Rename rtl8723b_set_AP_FwWoWlanRelated_cmd to rtl8723b_set_ap_wowlan_cmd to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function rtl8723b_set_wowlan_cmd as all it does is call rtl8723b_set_FwWoWlanRelated_cmd. Rename rtl8723b_set_FwWoWlanRelated_cmd to rtl8723b_set_wowlan_cmd to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function PHY_GetTxPowerIndex as it does nothing except call PHY_GetTxPowerIndex_8723B. Rename PHY_GetTxPowerIndex_8723B to PHY_GetTxPowerIndex to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function PHY_SetTxPowerIndex as it does nothing except call PHY_SetTxPowerIndex_8723B. Rename PHY_SetTxPowerIndex_8723B to PHY_SetTxPowerIndex to maintain compatibility with call site. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Change comparisons to true to the variable itself. Change comparisons to false to the negation of the variable. Signed-off-by:
-
Colin Ian King authored
A statement is indented one level too deeply; clean this up by removing a tab. Signed-off-by:
-
Sergio Paracuellos authored
Function 'mt7621_pcie_request_resources' is using 'err' local variable to get value returned from 'devm_request_pci_bus_resources' and returning after that. This is not needed at all. Instead of that just directly return returned value by the function which is also returning zero on success. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20190720072908.16795-1-sergio.paracuellos@gmail.comSigned-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8192e/rtllib_rx.c: In function rtllib_rx_InfraAdhoc: drivers/staging/rtl8192e/rtllib_rx.c:1303:6: warning: variable payload set but not used [-Wunused-but-set-variable] Reported-by:
-
Colin Ian King authored
The variable n is being assigned a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Michael Straube authored
Remove the unused file hal_phy.c. No function from this file is used in the driver code and it is not listed in the Makefile. Signed-off-by:
-
Hariprasad Kelam authored
Remove Unneeded variable ret . Return _FAIL . We cannot change return type of on_action_spct as its callback function. Issue identified with coccicheck. Signed-off-by:
-
Hariprasad Kelam authored
Change return type of rtw_suspend_ap_wow as its always return SUCCCESS. Issue found with coccicheck Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/hal/odm_HWConfig.c: In function odm_RxPhyStatus92CSeries_Parsing: drivers/staging/rtl8723bs/hal/odm_HWConfig.c:92:5: warning: variable cck_highpwr set but not used [-Wunused-but-set-variable] It is never used and can be removed. Reported-by:
-
Nishka Dasgupta authored
Change return type of r8712_free_recvframe from int to void as it always returns _SUCCESS and its return value is never used. Signed-off-by:
-
Nishka Dasgupta authored
Change return type of r8712_init_recvbuf from int to void as it always returned _SUCCESS and this return value was never used at any call site. Signed-off-by:
-
Nishka Dasgupta authored
Change call sites of r8712_set_802_11_add_wep to check for 0 and non-zero values (e.g -EINVAL, -ENOMEM) instead of for _SUCCESS and _FAIL. Change return values of r8712_set_802_11_add_wep from true and false and _SUCCESS to -EINVAL and the return value of r8712_set_key. Change return type from u8 to int to accommodate these new return values. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of init_mp_priv from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Remove label that returns the required value and return the values directly as they are set. Consequently remove now-unnecessary return variable. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_register_cmd_alive from _SUCCESS and _FAIL to 0 and -EINVAL. Change the return type of this function from sint to int. Modify its call site to check for 0 instead of _SUCCESS. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_set_key from _SUCCESS and _FAIL to 0 and -ENOMEM or -EINVAL, as the case may require. Modify return statements and return variable accordingly. Change return type from sint to int. As there is only one site where the return value is used, update that call site according to the change in the return values. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of r8712_set_auth from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Modify call site accordingly. Also change return type of the function from sint to int. Signed-off-by:
-
