Structures which are about to be copied to userspace shouldn't have
uninitialized fields or paddings.
memset() the whole &ip_tunnel_parm in ip_tunnel_parm_to_user() before
filling it with the kernel data. The compilers will hopefully combine
writes to it.

Fixes: 117aef12 ("ip_tunnel: use a separate struct to store tunnel params in the kernel")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/5f63dd25-de94-4ca3-84e6-14095953db13@moroto.mountainSigned-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

No longer hold RTNL while calling ip6addrlbl_dump()
("ip addrlabel show")

ip6addrlbl_dump() was already mostly relying on RCU anyway.

Add READ_ONCE()/WRITE_ONCE() annotations around
net->ipv6.ip6addrlbl_table.seq

Note that ifal_seq value is currently ignored in iproute2,
and a bit weak.

We might user later cb->seq  / nl_dump_check_consistent()
protocol if needed.

Also change return value for a completed dump,
so that NLMSG_DONE can be appended to current skb,
saving one recvmsg() system call.

v2: read net->ipv6.ip6addrlbl_table.seq once, (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link:https://lore.kernel.org/netdev/67f5cb70-14a4-4455-8372-f039da2f15c2@kernel.org/Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

fqdir_free_fn() is using very expensive rcu_barrier()

When one netns is dismantled, we often call fqdir_exit()
multiple times, typically lauching fqdir_free_fn() twice.

Delaying by one second fqdir_free_fn() helps to reduce
the number of rcu_barrier() calls, and lock contention
on rcu_state.barrier_mutex.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 3e2f544d ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.

Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

With commit 34d21de9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the ip6_vti and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Maxime Chevallier says:

====================
Introduce PHY listing and link_topology tracking

This is V11 for the link topology addition, allowing to track all PHYs
that are linked to netdevices.

This V11 addresses the various netlink-related issues that were raised
by Jakub, and fixes some typos in the documentation.

As a remainder, here's what the PHY listings would look like :
 - eth0 has a 88x3310 acting as media converter, and an SFP module with
   an embedded 88e1111 PHY
 - eth2 has a 88e1510 PHY

PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
PHY id: 0
Upstream type: MAC

PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
PHY id: 21040322
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0

PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
PHY id: 21040593
Upstream type: MAC

Ethtool patches : https://github.com/minimaxwell/ethtool/tree/link-topo-v6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.

By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.

With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.

The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.

Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.

The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.

This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.

The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The same implementation is also valid for 88E1145. VCT in 88E1111 is
similar to the 88E609x family. The main difference lies in register
organization and required workarounds.

It utilizes the same fields in registers but requires a simpler
implementation.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink_compat_running_version() sticks out when running
netdevsim tests and watching dropped skbs. Add nlmsg_consume()
for cases were we want to free a netlink skb but it is expected,
rather than a drop. af_netlink code uses consume_skb() directly,
which is fine, but some may prefer the symmetry of nlmsg_new() /
nlmsg_consume().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ->decrypted bit can be reused for other crypto protocols.
Remove the direct dependency on TLS, add helpers to clean up
the ifdefs leaking out everywhere.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hangbin Liu says:

====================
ynl: rename array-nest to indexed-array

rename array-nest to indexed-array and add un-nest sub-type support
====================

Link: https://lore.kernel.org/r/20240404063114.1221532-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add binary and integer sub-type support for indexed-array to display bond
arp and ns targets. Here is what the result looks like:

 # ip link add bond0 type bond mode 1 \
   arp_ip_target 192.168.1.1,192.168.1.2 ns_ip6_target 2001::1,2001::2
 # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
   --do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo'

    "arp-ip-target": [
      "192.168.1.1",
      "192.168.1.2"
    ],
    [...]
    "ns-ip6-target": [
      "2001::1",
      "2001::2"
    ],
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-3-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Some implementations, like bonding, has nest array with same attr type.
To support all kinds of entries under one nest array. As discussed[1],
let's rename array-nest to indexed-array, and assuming the value is
a nest by passing the type via sub-type.

[1] https://lore.kernel.org/netdev/20240312100105.16a59086@kernel.org/Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-2-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tp->window_clamp can be read locklessly, add READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240404114231.2195171-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rahul Rameshbabu says:

====================
ethtool HW timestamping statistics

The goal of this patch series is to introduce a common set of ethtool
statistics for hardware timestamping that a driver implementer can hook into.
The statistics counters added are based on what I believe are common
patterns/behaviors found across various hardware timestamping implementations
seen in the kernel tree today. The mlx5 family of devices is used
as the PoC for this patch series. Other vendors are more than welcome
to chime in on this series.

Link: https://lore.kernel.org/netdev/20240402205223.137565-1-rrameshbabu@nvidia.com/
Link: https://lore.kernel.org/netdev/20240309084440.299358-1-rrameshbabu@nvidia.com/
Link: https://lore.kernel.org/netdev/20240223192658.45893-1-rrameshbabu@nvidia.com/Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
====================

Link: https://lore.kernel.org/r/20240403212931.128541-1-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Print the nested stats attribute containing timestamping statistics when
the --show-time-stamping flag is used.

  [root@binary-eater-vm-01 linux-ethtool-ts]# ./tools/net/ynl/ethtool.py --show-time-stamping mlx5_1
  Time stamping parameters for mlx5_1:
  Capabilities:
    hardware-transmit
    hardware-receive
    hardware-raw-clock
  PTP Hardware Clock: 0
  Hardware Transmit Timestamp Modes:
    off
    on
  Hardware Receive Filter Modes:
    none
    all
  Statistics:
    tx-pkts: 8
    tx-lost: 0
    tx-err: 0
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-8-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Recent changes added header flags to the spec.
Use an enum instead of defines for more seamless codegen.

[Jakub: drop the already applied parts and rewrite message]
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-6-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Feed driver statistics counters related to hardware timestamping to
standardized ethtool hardware timestamping statistics group.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-5-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Count number of transmitted packets that were hardware timestamped at the
device DMA layer.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-4-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Track the number of times a CQE was expected to not be delivered on PTP Tx
port timestamping CQ. A CQE is expected to not be delivered if a certain
amount of time passes since the corresponding CQE containing the DMA
timestamp information has arrived. Increment the late_cqe counter when such
a CQE does manage to be delivered to the CQ.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-3-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Multiple network devices that support hardware timestamping appear to have
common behavior with regards to timestamp handling. Implement common Tx
hardware timestamping statistics in a tx_stats struct_group. Common Rx
hardware timestamping statistics can subsequently be implemented in a
rx_stats struct_group for ethtool_ts_stats.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-2-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Arnd Bergmann says:

====================
address all -Wunused-const warnings (the net part)

Compilers traditionally warn for unused 'static' variables, but not
if they are constant. The reason here is a custom for C++ programmers
to define named constants as 'static const' variables in header files
instead of using macros or enums.

In W=1 builds, we get warnings only static const variables in C
files, but not in headers, which is a good compromise, but this still
produces warning output in at least 30 files. These warnings are
almost all harmless, but also trivial to fix, and there is no
good reason to warn only about the non-const variables being unused.

I've gone through all the files that I found using randconfig and
allmodconfig builds and created patches to avoid these warnings,
with the goal of retaining a clean build once the option is enabled
by default.

Unfortunately, there is one fairly large patch ("drivers: remove
incorrect of_match_ptr/ACPI_PTR annotations") that touches
34 individual drivers that all need the same one-line change.
If necessary, I can split it up by driver or by subsystem,
but at least for reviewing I would keep it as one piece for
the moment.
====================

Link: https://lore.kernel.org/r/20240403080702.3509288-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When both ACPI and OF are disabled, xgbe_v1 is unused and
causes a W=1 warning:

drivers/net/ethernet/amd/xgbe/xgbe-platform.c:533:39: error: unused variable 'xgbe_v1' [-Werror,-Wunused-const-variable]
static const struct xgbe_version_data xgbe_v1 = {

There is no real point in trying to save a few bytes for the match
tables, so just make them always visible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-29-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The procfs file is completely unused without CONFIG_PROC_FS but causes
a compile time warning:

drivers/isdn/capi/kcapi_proc.c:97:36: error: unused variable 'seq_controller_ops' [-Werror,-Wunused-const-variable]
static const struct seq_operations seq_controller_ops = {
drivers/isdn/capi/kcapi_proc.c:104:36: error: unused variable 'seq_contrstats_ops' [-Werror,-Wunused-const-variable]
drivers/isdn/capi/kcapi_proc.c:179:36: error: unused variable 'seq_applications_ops' [-Werror,-Wunused-const-variable]
drivers/isdn/capi/kcapi_proc.c:186:36: error: unused variable 'seq_applstats_ops' [-Werror,-Wunused-const-variable]

Remove the file from the build in that config and make the calls into
it conditional instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-27-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This has never been used since the start of the git history. When building
with W=1, the unused variable produces a gcc warning:

drivers/net/ethernet/3com/3c515.c:35:18: error: 'mtu' defined but not used [-Werror=unused-const-variable=]

Just remove it.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-6-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

For 2 out of 3 of these changes we can simply swap in strscpy() as it
guarantess NUL-termination which is needed for the following trace
print.

trace_rpcgss_context() should use memcpy as its format specifier %.*s
allows for the length to be specifier (__entry->len). Due to this,
acceptor does not technically need to be NUL-terminated. Moreover,
swapping in strscpy() and keeping everything else the same could result
in truncation of the source string by one byte. To remedy this, we could
use `len + 1` but I am unsure of the size of the destination buffer so a
simple memcpy should suffice.
|	TP_printk("win_size=%u expiry=%lu now=%lu timeout=%u acceptor=%.*s",
|		__entry->window_size, __entry->expiry, __entry->now,
|		__entry->timeout, __entry->len, __get_str(acceptor))

I suspect acceptor not to naturally be a NUL-terminated string due to
the presence of some stringify methods.
|	.crstringify_acceptor	= gss_stringify_acceptor,

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240401-strncpy-include-trace-events-mdio-h-v1-1-9cb5a4cda116@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tariq Toukan says:

====================
mlx5e rc2 misc patches (part)

This patchset includes small features and a cleanup for the mlx5e driver.

Patches 1-2 by Cosmin implements FEC settings for 100G/lane modes.

Patch 3 is a simple cleanup.
====================

Link: https://lore.kernel.org/r/20240404173357.123307-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Un-expose functions that are not used outside of their c file.
Make them static.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240404173357.123307-6-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This consists of:
1. Expose the 100G/lane capability bit in the PCAM reg.
2. Expose the per link mode FEC capability masks in the PPLM reg.
3. Set the overrides according to ethtool parameters.
FEC for new modes is set if and only if the PCAM 100G/lane capability is
advertised and the capability mask for a given link mode reports that it
can accept the requested FEC mode.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240404173357.123307-3-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The check of whether a given FEC mode is supported in a given link mode
is about to get more complicated, so extract it in a separate function
to avoid code duplication.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240404173357.123307-2-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the correct tmo_us microsecond parameter for the PTP firmware
timeout parameter.

Fixes: 7de3c221 ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Reported-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240404195500.171071-1-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Oleksij Rempel says:

====================
net: dsa: microchip: ksz8: refactor FDB dump path

Refactor FDB dump code path for Microchip KSZ8xxx series. This series
mostly makes some cosmetic reworks and allows to forward errors detected
by the regmap.

Change logs are part of patch commit messages.
====================

Link: https://lore.kernel.org/r/20240403125039.3414824-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We already have a variable to provide number of entries. So use it,
instead of using error number.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-9-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The read/write path may fail. So, return error if we got it.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-8-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

EAGAIN was not used by previous code and not used by  current code. So,
remove it and use proper error value.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-7-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use 'ret' instead of 'rc' in ksz8_r_dyn_mac_table() to maintain
consistency with the rest of the file.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-6-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>