- 16 Sep, 2019 7 commits
-
-
Huang Rui authored
Renoir is GFX9, so enable v9 devcie queue manager. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
This patch inits renoir kfd device info, so we treat renoir as "dgpu" (bypass iommu v2). Will enable needs_iommu_device till renoir iommu is ready. v2: rebase and align the drm-next Signed-off-by:
-
Huang Rui authored
Renoir's cache info should be the same with raven and carrizo's. v2: fix missed "break" Signed-off-by:
-
Yong Zhao authored
Initial support of Navi14 in KFD. The device IDs will be added later. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
-
Felix Kuehling authored
There is no point retrying page faults in VMID0. Those faults are always fatal. Signed-off-by:
-
Yong Zhao authored
As more and more new asics start to reuse the old device IDs before launch, there is a need to quickly override the existing asic type corresponding to the reused device ID through a kernel parameter. With this, engineers no longer need to rely on local hack patches, facilitating cooperation across teams. Signed-off-by:
-
Alex Deucher authored
We need to check if the nbios funcs exist before checking the individual pointers. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com>
-
- 13 Sep, 2019 33 commits
-
-
Qingqing Zhuo authored
Signed-off-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Jing Zhou authored
[Why] DP1.2 LL CTS test failure. [How] The failure is caused by not verify stream link is equal to link, only check stream and link is not null. Signed-off-by:
Jing Zhou <Jing.Zhou@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Charlene Liu authored
[Description] 1. OUTSTANDING_REQUEST_LIMIT update from 0xFF to 0x1F (HW doc update) 2. using memory type to convert UMC's MCLK to Yclk. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Bayan Zabihiyan authored
[Why] Edid Utility wishes to include DSC module from driver instead of doing it's own logic which will need to be updated every time someone modifies the driver logic. [How] Modify some functions such that we dont need to pass the entire DC structure as parameter. -Remove DC inclusion from module. -Filter out problematic types and inclusions Signed-off-by:
Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Jaehyun Chung authored
[Why] Underflow occurs on some display setups(repro'd on 3x4K HDR) on boot, mode set, and hot-plugs with. Underflow occurs because mem clk is not set high after disabling pstate switching. This behaviour occurs because some calculations assumed displays were synchronized. [How] Add a condition to check if timing sync is disabled so that synchronized vblank can be set to false. Signed-off-by:
Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
-
Jun Lei authored
[why] dc_destroy should only clean up SW, this is because GPUs may be removed before driver unload, leading to HW to be unavailable. [how] remove GPIO close as part of GPIO destroy, this is unnecessary because GPIO is not shared, and GPIOs are generally closed after being opened Add tracking to HW access during destructor to make future issues easier to pinpoint, and block access to prevent hangs. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Vitaly Prosyak authored
[Why & How] Use dcn2 blender, shaper, 3dlut registers Signed-off-by:
Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
Remove code used to allow compilation error free interface change. Signed-off-by:
-
Dmytro Laktyushkin authored
New behaviour will track global updates and update any hw that isn't related to current stream being updated. This should fix any issues caused by pipe split pipes being taken by other streams. Signed-off-by:
-
Ilya Bakoulin authored
[Why] - Need to add missing surface address register definitions. - RGBE+A does not work in a stereo configuration because surface addresses are no programmed correctly. [How] Added the register definitions and surface address programming. Signed-off-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by:
-
Anthony Koo authored
Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
-
Nikola Cornij authored
[why] It's sometimes useful to have this option when debugging [how] Add a config flag. If the flag is not set, use driver default policy. If the flag is set, use the value from the flag as the starting DSC slice height. Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
-
Nikola Cornij authored
[why] The requirement has been clarified and only DSC 4:2:2 Native has to be disabled. Signed-off-by:
-
Alvin Lee authored
We should not allocate payloads if the link is lost until the link is retrained. Some displays require this. Signed-off-by:
-
Krunoslav Kovac authored
[Why&How] Driver defaults to 1-tap subsample mode for 4:2:2. DCE11.2 added 3-tap. The policy is: DCE8-DCE11 - change to 2-tap, it's better than 1-tap. DCE11.2+ - use 3-tap Note that 4:2:0 was added in DCE11.2 and already uses 3-tap always. Note 2 is that DCE not covered on Linux, only DCN+ Signed-off-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
-
Lewis Huang authored
[Why] When user mode use i2c over aux through ADL or DDI, the function dal_ddc_service_query_ddc_data will be called. There are two issues. 1. When read/write length > 16byte, current always return false because the DEFAULT_AUX_MAX_DATA_SIZE != length. 2. When usermode only need to read data through i2c, driver will write mot = true at the same address and cause i2c sink confused. Therefore the following read command will get garbage. [How] 1. Add function dal_dcc_submit_aux_command to handle length > 16 byte. 2. Check read size and write size when query ddc data. Signed-off-by:
Lewis Huang <Lewis.Huang@amd.com> Reviewed-by:
-
Ilya Bakoulin authored
[Why] DML diags tests are failing because the struct contents get clobbered by a memcpy. [How] Remove the memcpy call. Signed-off-by:
-
Yong Zhao authored
The issue was accidentally introduced recently. Signed-off-by:
-
Tao Zhou authored
ras recovery_init should be called after ttm init, bad page reserve should be put in front of gpu reset since i2c may be unstable during gpu reset. add cleanup for recovery_init and recovery_fini v2: add more comment and print. remove cancel_work_sync in recovery_init. Signed-off-by:Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Tao Zhou authored
save umc error records to ras bad page array v2: add bad pages before gpu reset v3: add NULL check for adev->umc.funcs Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
Tao Zhou authored
support eeprom records load and save for ras, move EEPROM records storing to bad page reserving v2: remove redundant check for con->eh_data Signed-off-by:
-
Tao Zhou authored
change bps type from retired page to eeprom table record, prepare for saving umc error records to eeprom Signed-off-by:
-
Andrey Grodzovsky authored
Fix typo which messed up the calculation. Signed-off-by:
-
Andrey Grodzovsky authored
Restoring clock gating break SMU opeartion afterwards, avoid this until this further invistigated with SMU. Signed-off-by:
-
Andrey Grodzovsky authored
Protect from concurrent SMU accesses. Signed-off-by:
-
Roman Li authored
[Why] The earlier patch "Hook up calls to do stereo mux and dig programming..." doesn't include update for dcn21. [How] Align dcn21 gpio settings with updated stereo control interface. Signed-off-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Aaron Liu <aaron.liu@amd.com> Signed-off-by:
-
Yong Zhao authored
This optimizes out the pci device id usage in KFD and makes the code more maintainable. Signed-off-by:
-
Felix Kuehling authored
These wptrs must be pinned and GPU accessible when this is called from hqd_load functions. So they should never fault. This resolves a circular lock dependency issue involving four locks including the DQM lock and mmap_sem. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Signed-off-by:
-
Aaron Liu authored
With stutter mode enabled, NMI prints frequently. Disable stutter for the moment because NMI warning storm, and will enable it back till the issue is addressed Signed-off-by:
-
Aaron Liu authored
This patch updates MP1_BASE in renoir_ip_offset.h Signed-off-by:
-
Prike Liang authored
With the common interface print_clk_levels can get the following dpm clock: -pp_dpm_dcefclk -pp_dpm_fclk -pp_dpm_mclk -pp_dpm_sclk -pp_dpm_socclk Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
John Clements authored
Removed redundant goto statement Signed-off-by:
John Clements <john.clements@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
John Clements authored
Add support for loading XGMI/RAS FW Signed-off-by:
-
