- 18 Oct, 2018 40 commits
-
-
Russell King authored
Commit f5fe12b1 upstream. In order to prevent aliasing attacks on the branch predictor, invalidate the BTB or instruction cache on CPUs that are known to be affected when taking an abort on a address that is outside of a user task limit: Cortex A8, A9, A12, A17, A73, A75: flush BTB. Cortex A15, Brahma B15: invalidate icache. If the IBE bit is not set, then there is little point to enabling the workaround. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Boot-tested-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
David A. Long <dave.long@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Russell King authored
Commit e388b802 upstream. When the branch predictor hardening is enabled, firmware must have set the IBE bit in the auxiliary control register. If this bit has not been set, the Spectre workarounds will not be functional. Add validation that this bit is set, and print a warning at alert level if this is not the case. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by:
-
Russell King authored
Commit 06c23f5f upstream. Required manual merge of arch/arm/mm/proc-v7.S. Harden the branch predictor against Spectre v2 attacks on context switches for ARMv7 and later CPUs. We do this by: Cortex A9, A12, A17, A73, A75: invalidating the BTB. Cortex A15, Brahma B15: invalidating the instruction cache. Cortex A57 and Cortex A72 are not addressed in this patch. Cortex R7 and Cortex R8 are also not addressed as we do not enforce memory protection on these cores. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Russell King authored
Commit c58d237d upstream. Add a Kconfig symbol for CPUs which are vulnerable to the Spectre attacks. Signed-off-by:
-
Russell King authored
Commit 9d3a0492 upstream. Add support for per-processor bug checking - each processor function descriptor gains a function pointer for this check, which must not be an __init function. If non-NULL, this will be called whenever a CPU enters the kernel via which ever path (boot CPU, secondary CPU startup, CPU resuming, etc.) This allows processor specific bug checks to validate that workaround bits are properly enabled by firmware via all entry paths to the kernel. Signed-off-by:
-
Russell King authored
Commit 26602161 upstream. Check for CPU bugs when secondary processors are being brought online, and also when CPUs are resuming from a low power mode. This gives an opportunity to check that processor specific bug workarounds are correctly enabled for all paths that a CPU re-enters the kernel. Signed-off-by:
-
Russell King authored
Commit a5b9177f upstream. Prepare the processor bug infrastructure so that it can be expanded to check for per-processor bugs. Signed-off-by:
-
Russell King authored
Commit f5683e76 upstream. Add CPU part numbers for Cortex A53, A57, A72, A73, A75 and the Broadcom Brahma B15 CPU. Signed-off-by:
-
Roman Gushchin authored
commit 7aaf7727 upstream. Don't show nr_indirectly_reclaimable in /proc/vmstat, because there is no need to export this vm counter to userspace, and some changes are expected in reclaimable object accounting, which can alter this counter. Link: http://lkml.kernel.org/r/20180425191422.9159-1-guro@fb.comSigned-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Roman Gushchin authored
commit d79f7aa4 upstream. Indirectly reclaimable memory can consume a significant part of total memory and it's actually reclaimable (it will be released under actual memory pressure). So, the overcommit logic should treat it as free. Otherwise, it's possible to cause random system-wide memory allocation failures by consuming a significant amount of memory by indirectly reclaimable memory, e.g. dentry external names. If overcommit policy GUESS is used, it might be used for denial of service attack under some conditions. The following program illustrates the approach. It causes the kernel to allocate an unreclaimable kmalloc-256 chunk for each stat() call, so that at some point the overcommit logic may start blocking large allocation system-wide. int main() { char buf[256]; unsigned long i; struct stat statbuf; buf[0] = '/'; for (i = 1; i < sizeof(buf); i++) buf[i] = '_'; for (i = 0; 1; i++) { sprintf(&buf[248], "%8lu", i); stat(buf, &statbuf); } return 0; } This patch in combination with related indirectly reclaimable memory patches closes this issue. Link: http://lkml.kernel.org/r/20180313130041.8078-1-guro@fb.comSigned-off-by:
-
Roman Gushchin authored
commit f1782c9b upstream. I received a report about suspicious growth of unreclaimable slabs on some machines. I've found that it happens on machines with low memory pressure, and these unreclaimable slabs are external names attached to dentries. External names are allocated using generic kmalloc() function, so they are accounted as unreclaimable. But they are held by dentries, which are reclaimable, and they will be reclaimed under the memory pressure. In particular, this breaks MemAvailable calculation, as it doesn't take unreclaimable slabs into account. This leads to a silly situation, when a machine is almost idle, has no memory pressure and therefore has a big dentry cache. And the resulting MemAvailable is too low to start a new workload. To address the issue, the NR_INDIRECTLY_RECLAIMABLE_BYTES counter is used to track the amount of memory, consumed by external names. The counter is increased in the dentry allocation path, if an external name structure is allocated; and it's decreased in the dentry freeing path. To reproduce the problem I've used the following Python script: import os for iter in range (0, 10000000): try: name = ("/some_long_name_%d" % iter) + "_" * 220 os.stat(name) except Exception: pass Without this patch: $ cat /proc/meminfo | grep MemAvailable MemAvailable: 7811688 kB $ python indirect.py $ cat /proc/meminfo | grep MemAvailable MemAvailable: 2753052 kB With the patch: $ cat /proc/meminfo | grep MemAvailable MemAvailable: 7809516 kB $ python indirect.py $ cat /proc/meminfo | grep MemAvailable MemAvailable: 7749144 kB [guro@fb.com: fix indirectly reclaimable memory accounting for CONFIG_SLOB] Link: http://lkml.kernel.org/r/20180312194140.19517-1-guro@fb.com [guro@fb.com: fix indirectly reclaimable memory accounting] Link: http://lkml.kernel.org/r/20180313125701.7955-1-guro@fb.com Link: http://lkml.kernel.org/r/20180305133743.12746-5-guro@fb.comSigned-off-by:
-
Roman Gushchin authored
commit 034ebf65 upstream. Adjust /proc/meminfo MemAvailable calculation by adding the amount of indirectly reclaimable memory (rounded to the PAGE_SIZE). Link: http://lkml.kernel.org/r/20180305133743.12746-4-guro@fb.comSigned-off-by:
-
Roman Gushchin authored
commit eb592546 upstream. Patch series "indirectly reclaimable memory", v2. This patchset introduces the concept of indirectly reclaimable memory and applies it to fix the issue of when a big number of dentries with external names can significantly affect the MemAvailable value. This patch (of 3): Introduce a concept of indirectly reclaimable memory and adds the corresponding memory counter and /proc/vmstat item. Indirectly reclaimable memory is any sort of memory, used by the kernel (except of reclaimable slabs), which is actually reclaimable, i.e. will be released under memory pressure. The counter is in bytes, as it's not always possible to count such objects in pages. The name contains BYTES by analogy to NR_KERNEL_STACK_KB. Link: http://lkml.kernel.org/r/20180305133743.12746-2-guro@fb.comSigned-off-by:
-
Mathias Nyman authored
commit 1208d8a8 upstream. When disabling a USB3 port the hub driver will set the port link state to U3 to prevent "ejected" or "safely removed" devices that are still physically connected from immediately re-enumerating. If the device was really unplugged, then error messages were printed as the hub tries to set the U3 link state for a port that is no longer enabled. xhci-hcd ee000000.usb: Cannot set link state. usb usb8-port1: cannot disable (err = -32) Don't print error message in xhci-hub if hub tries to set port link state for a disabled port. Return -ENODEV instead which also silences hub driver. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Ross Zwisler <zwisler@google.com> Signed-off-by:
-
Edgar Cherkasov authored
commit 08d9db00 upstream. The i2c-scmi driver crashes when the SMBus Write Block transaction is executed: WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0 Call Trace: ? get_page_from_freelist+0x49d/0x11f0 ? alloc_pages_current+0x6a/0xe0 ? new_slab+0x499/0x690 __alloc_pages_nodemask+0x265/0x280 alloc_pages_current+0x6a/0xe0 kmalloc_order+0x18/0x40 kmalloc_order_trace+0x24/0xb0 ? acpi_ut_allocate_object_desc_dbg+0x62/0x10c __kmalloc+0x203/0x220 acpi_os_allocate_zeroed+0x34/0x36 acpi_ut_copy_eobject_to_iobject+0x266/0x31e acpi_evaluate_object+0x166/0x3b2 acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi] i2c_smbus_xfer+0xda/0x370 i2cdev_ioctl_smbus+0x1bd/0x270 i2cdev_ioctl+0xaa/0x250 do_vfs_ioctl+0xa4/0x600 SyS_ioctl+0x79/0x90 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ACPI Error: Evaluating _SBW: 4 (20170831/smbus_cmi-185) This problem occurs because the length of ACPI Buffer object is not defined/initialized in the code before a corresponding ACPI method is called. The obvious patch below fixes this issue. Signed-off-by:
Edgar Cherkasov <echerkasov@dev.rtsoft.ru> Acked-by:
Viktor Krasnov <vkrasnov@dev.rtsoft.ru> Acked-by:
Michael Brunner <Michael.Brunner@kontron.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Jan Kara authored
commit 4628a645 upstream. Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a result we will see warnings such as: BUG: Bad page map in process JobWrk0013 pte:800001803875ea25 pmd:7624381067 addr:00007f0930720000 vm_flags:280000f9 anon_vma: (null) mapping:ffff97f2384056f0 index:0 file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage: (null) CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G W 4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased) Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 Call Trace: dump_stack+0x5a/0x75 print_bad_pte+0x217/0x2c0 ? enqueue_task_fair+0x76/0x9f0 _vm_normal_page+0xe5/0x100 zap_pte_range+0x148/0x740 unmap_page_range+0x39a/0x4b0 unmap_vmas+0x42/0x90 unmap_region+0x99/0xf0 ? vma_gap_callbacks_rotate+0x1a/0x20 do_munmap+0x255/0x3a0 vm_munmap+0x54/0x80 SyS_munmap+0x1d/0x30 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ... when mprotect(2) gets used on DAX mappings. Also there is a wide variety of other failures that can result from the missing _PAGE_DEVMAP flag when the area gets used by get_user_pages() later. Fix the problem by including _PAGE_DEVMAP in a set of flags that get preserved by mprotect(2). Fixes: 69660fd7 ("x86, mm: introduce _PAGE_DEVMAP") Fixes: ebd31197 ("powerpc/mm: Add devmap support for ppc64") Cc: <stable@vger.kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Jérôme Glisse authored
commit bfba8e5c upstream. Inside set_pmd_migration_entry() we are holding page table locks and thus we can not sleep so we can not call invalidate_range_start/end() So remove call to mmu_notifier_invalidate_range_start/end() because they are call inside the function calling set_pmd_migration_entry() (see try_to_unmap_one()). Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.comSigned-off-by:
Jérôme Glisse <jglisse@redhat.com> Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Zi Yan <zi.yan@cs.rutgers.edu> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Will Deacon authored
commit ca2b4972 upstream. It doesn't make sense for a perf event to be configured as a CHAIN event in isolation, so extend the arm_pmu structure with a ->filter_match() function to allow the backend PMU implementation to reject CHAIN events early. Cc: <stable@vger.kernel.org> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Marco Felsch authored
commit f259f896 upstream. Since 'commit 02e389e6 ("pinctrl: mcp23s08: fix irq setup order")' the irq request isn't the last devm_* allocation. Without a deeper look at the irq and testing this isn't a good solution. Since this driver relies on the devm mechanism, requesting a interrupt should be the last thing to avoid memory corruptions during unbinding. 'Commit 02e389e6 ("pinctrl: mcp23s08: fix irq setup order")' fixed the order for the interrupt-controller use case only. The mcp23s08_irq_setup() must be split into two to fix it for the interrupt-controller use case and to register the irq at last. So the irq will be freed first during unbind. Cc: stable@vger.kernel.org Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Dmitry Mastykin <mastichi@gmail.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Fixes: 82039d24 ("pinctrl: mcp23s08: add pinconf support") Fixes: 02e389e6 ("pinctrl: mcp23s08: fix irq setup order") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Tested-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Chris Boot authored
commit 41591b38 upstream. On some SD cards over SPI, reading with the multiblock read command the last sector will leave the card in a bad state. Remove last sectors from the multiblock reading cmd. Signed-off-by:
Chris Boot <bootc@bootc.net> Signed-off-by:
Clément Péron <peron.clem@gmail.com> Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Tejun Heo authored
commit 479adb89 upstream. A cgroup which is already a threaded domain may be converted into a threaded cgroup if the prerequisite conditions are met. When this happens, all threaded descendant should also have their ->dom_cgrp updated to the new threaded domain cgroup. Unfortunately, this propagation was missing leading to the following failure. # cd /sys/fs/cgroup/unified # cat cgroup.subtree_control # show that no controllers are enabled # mkdir -p mycgrp/a/b/c # echo threaded > mycgrp/a/b/cgroup.type At this point, the hierarchy looks as follows: mycgrp [d] a [dt] b [t] c [inv] Now let's make node "a" threaded (and thus "mycgrp" s made "domain threaded"): # echo threaded > mycgrp/a/cgroup.type By this point, we now have a hierarchy that looks as follows: mycgrp [dt] a [t] b [t] c [inv] But, when we try to convert the node "c" from "domain invalid" to "threaded", we get ENOTSUP on the write(): # echo threaded > mycgrp/a/b/c/cgroup.type sh: echo: write error: Operation not supported This patch fixes the problem by * Moving the opencoded ->dom_cgrp save and restoration in cgroup_enable_threaded() into cgroup_{save|restore}_control() so that mulitple cgroups can be handled. * Updating all threaded descendants' ->dom_cgrp to point to the new dom_cgrp when enabling threaded mode. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
"Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Reported-by:
Amin Jamali <ajamali@pivotal.io> Reported-by:
Joao De Almeida Pereira <jpereira@pivotal.io> Link: https://lore.kernel.org/r/CAKgNAkhHYCMn74TCNiMJ=ccLd7DcmXSbvw3CbZ1YREeG7iJM5g@mail.gmail.com Fixes: 454000ad ("cgroup: introduce cgroup->dom_cgrp and threaded css_set handling") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
Damien Le Moal authored
commit 118aa47c upstream. The dm-linear target is independent of the dm-zoned target. For code requiring support for zoned block devices, use CONFIG_BLK_DEV_ZONED instead of CONFIG_DM_ZONED. While at it, similarly to dm linear, also enable the DM_TARGET_ZONED_HM feature in dm-flakey only if CONFIG_BLK_DEV_ZONED is defined. Fixes: beb9caac ("dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled") Fixes: 0be12c1c ("dm linear: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit beb9caac upstream. It is best to avoid any extra overhead associated with bio completion. DM core will indirectly call a DM target's .end_io if it is defined. In the case of DM linear, there is no need to do so (for every bio that completes) if CONFIG_DM_ZONED is not enabled. Avoiding an extra indirect call for every bio completion is very important for ensuring DM linear doesn't incur more overhead that further widens the performance gap between dm-linear and raw block devices. Fixes: 0be12c1c ("dm linear: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by:
-
Damien Le Moal authored
commit 9864cd5d upstream. If dm-linear or dm-flakey are layered on top of a partition of a zoned block device, remapping of the start sector and write pointer position of the zones reported by a report zones BIO must be modified to account for the target table entry mapping (start offset within the device and entry mapping with the dm device). If the target's backing device is a partition of a whole disk, the start sector on the physical device of the partition must also be accounted for when modifying the zone information. However, dm_remap_zone_report() was not considering this last case, resulting in incorrect zone information remapping with targets using disk partitions. Fix this by calculating the target backing device start sector using the position of the completed report zones BIO and the unchanged position and size of the original report zone BIO. With this value calculated, the start sector and write pointer position of the target zones can be correctly remapped. Fixes: 10999307 ("dm: introduce dm_remap_zone_report()") Cc: stable@vger.kernel.org Signed-off-by:
-
Shenghui Wang authored
commit c7cd5550 upstream. Commit 7e6358d2 ("dm: fix various targets to dm_register_target after module __init resources created") inadvertently introduced this bug when it moved dm_register_target() after the call to KMEM_CACHE(). Fixes: 7e6358d2 ("dm: fix various targets to dm_register_target after module __init resources created") Cc: stable@vger.kernel.org Signed-off-by:
Shenghui Wang <shhuiw@foxmail.com> Signed-off-by:
-
Eric Farman authored
commit 24abf290 upstream. We have two nested loops to check the entries within the pfn_array_table arrays. But we mistakenly use the outer array as an index in our check, and completely ignore the indexing performed by the inner loop. Cc: stable@vger.kernel.org Signed-off-by:
Eric Farman <farman@linux.ibm.com> Message-Id: <20181002010235.42483-1-farman@linux.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit d005efe1 upstream. With the "branches" export option, not all sample columns are exported. However the unwanted columns are not at the end of the tuple, as assumed by the code. Fix by taking the first 15 and last 3 values, instead of the first 18. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180911114504.28516-3-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 25e11700 upstream. Occasional export failures were found to be caused by truncating 64-bit pointers to 32-bits. Fix by explicitly setting types for all ctype arguments and results. Signed-off-by:
-
Mike Rapoport authored
commit 6685b357 upstream. The commit ca460b3c ("percpu: introduce bitmap metadata blocks") introduced bitmap metadata blocks. These metadata blocks are allocated whenever a new chunk is created, but they are never freed. Fix it. Fixes: ca460b3c ("percpu: introduce bitmap metadata blocks") Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Mikulas Patocka authored
commit 76ebebd2 upstream. On Sun Ultra 5, it happens that the dot clock is not set up properly for some videomodes. For example, if we set the videomode "r1024x768x60" in the firmware, Linux would incorrectly set a videomode with refresh rate 180Hz when booting (suprisingly, my LCD monitor can display it, although display quality is very low). The reason is this: Older mach64 cards set the divider in the register VCLK_POST_DIV. The register has four 2-bit fields (the field that is actually used is specified in the lowest two bits of the register CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards, there's another bit added - the top four bits of PLL_EXT_CNTL extend the divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12". The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets them, so it can work regardless if the card supports them. However, the sparc64 firmware may set these extended dividers during boot - and the mach64 driver detects incorrect dot clock in this case. This patch makes the driver read the additional divider bit from PLL_EXT_CNTL and calculate the initial refresh rate properly. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Acked-by:
David S. Miller <davem@davemloft.net> Reviewed-by:
Ville Syrjälä <syrjala@sci.fi> Signed-off-by:
-
Paul Burton authored
commit ea7e0480 upstream. When using the legacy mmap layout, for example triggered using ulimit -s unlimited, get_unmapped_area() fills memory from bottom to top starting from a fairly low address near TASK_UNMAPPED_BASE. This placement is suboptimal if the user application wishes to allocate large amounts of heap memory using the brk syscall. With the VDSO being located low in the user's virtual address space, the amount of space available for access using brk is limited much more than it was prior to the introduction of the VDSO. For example: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap] 2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar] 2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso] 2ab99000-2ab9d000 rwxp 00000000 00:00 0 ... Resolve this by adjusting STACK_TOP to reserve space for the VDSO & providing an address hint to get_unmapped_area() causing it to use this space even when using the legacy mmap layout. We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64 bit systems respectively within which we randomize the VDSO base address. Previously this randomization was taken care of by the mmap base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB sizes are somewhat arbitrary but chosen such that we have some randomization without taking up too much of the user's virtual address space, which is often in short supply for 32 bit systems. With this the VDSO is always mapped at a high address, leaving lots of space for statically linked programs to make use of brk: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00c28000-00c49000 rwxp 00000000 00:00 0 [heap] ... 7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack] 7f7fc000-7f7fd000 rwxp 00000000 00:00 0 7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar] 7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso] Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Huacai Chen <chenhc@lemote.com> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Jann Horn authored
commit 28e2c4bb upstream. 7a9cdebd ("mm: get rid of vmacache_flush_all() entirely") removed the VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding entry in vmstat_text. This causes an out-of-bounds access in vmstat_show(). Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which is probably very rare. Link: http://lkml.kernel.org/r/20181001143138.95119-1-jannh@google.com Fixes: 7a9cdebd ("mm: get rid of vmacache_flush_all() entirely") Signed-off-by:
Jann Horn <jannh@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Amber Lin authored
[ Upstream commit caaa4c8a ] A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit. Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Amber Lin <Amber.Lin@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit d1766202 ] When VMX is used with flexpriority disabled (because of no support or if disabled with module parameter) MMIO interface to lAPIC is still available in x2APIC mode while it shouldn't be (kvm-unit-tests): PASS: apic_disable: Local apic enabled in x2APIC mode PASS: apic_disable: CPUID.1H:EDX.APIC[bit 9] is set FAIL: apic_disable: *0xfee00030: 50014 The issue appears because we basically do nothing while switching to x2APIC mode when APIC access page is not used. apic_mmio_{read,write} only check if lAPIC is disabled before proceeding to actual write. When APIC access is virtualized we correctly manipulate with VMX controls in vmx_set_virtual_apic_mode() and we don't get vmexits from memory writes in x2APIC mode so there's no issue. Disabling MMIO interface seems to be easy. The question is: what do we do with these reads and writes? If we add apic_x2apic_mode() check to apic_mmio_in_range() and return -EOPNOTSUPP these reads and writes will go to userspace. When lAPIC is in kernel, Qemu uses this interface to inject MSIs only (see kvm_apic_mem_write() in hw/i386/kvm/apic.c). This somehow works with disabled lAPIC but when we're in xAPIC mode we will get a real injected MSI from every write to lAPIC. Not good. The simplest solution seems to be to just ignore writes to the region and return ~0 for all reads when we're in x2APIC mode. This is what this patch does. However, this approach is inconsistent with what currently happens when flexpriority is enabled: we allocate APIC access page and create KVM memory region so in x2APIC modes all reads and writes go to this pre-allocated page which is, btw, the same for all vCPUs. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 648e9218 ] Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver has been modified to get and enable this clock (if present) the marking of the clocks as CLK_IS_CRITICAL is no longer necessary. This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail devices not being able to reach S0i3 greatly decreasing their battery drain when suspended. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by:
Johannes Stezenbach <js@sig21.net> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit b1e3454d ] Commit d31fd43c ("clk: x86: Do not gate clocks enabled by the firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i2 or S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk" alias, so that the relevant ethernet drivers can try to (optionally) use this, without needing X86 specific code / hacks, thus fixing ethernet on these devices without breaking S0i3 support. This commit uses clkdev_hw_create() to create the alias, mirroring the code for the already existing "mclk" alias for pmc_plt_clk_3. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by:
-
Stephen Hemminger authored
[ Upstream commit a15f2c08 ] The Hyper-V host API for PCI provides a unique "serial number" which can be used as basis for sysfs PCI slot table. This can be useful for cases where userspace wants to find the PCI device based on serial number. When an SR-IOV NIC is added, the host sends an attach message with serial number. The kernel doesn't use the serial number, but it is useful when doing the same thing in a userspace driver such as the DPDK. By having /sys/bus/pci/slots/N it provides a direct way to find the matching PCI device. There maybe some cases where serial number is not unique such as when using GPU's. But the PCI slot infrastructure will handle that. This has a side effect which may also be useful. The common udev network device naming policy uses the slot information (rather than PCI address). Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Nicolas Ferre authored
[ Upstream commit 321cc359 ] We need this new compatibility string as we experienced different behavior for this 10/100Mbits/s macb interface on this particular SoC. Backward compatibility is preserved as we keep the alternative strings. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Nicolas Ferre authored
[ Upstream commit eb4ed8e2 ] Create a new configuration for the sama5d3-macb new compatibility string. This configuration disables scatter-gather because we experienced lock down of the macb interface of this particular SoC under very high load. Signed-off-by:
-
Jongsung Kim authored
[ Upstream commit edf2ef72 ] Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or 128 unicast filter entries. (Table 7-8 MAC Address Registers from databook) Fix dwmac1000_validate_ucast_entries() to accept values between 1 and 32 in addition. Signed-off-by:
Jongsung Kim <neidhard.kim@lge.com> Signed-off-by:
-
