Launch a simple guest (with several instructions as payload) on ACRN
with demonstration ioctl usage.
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-19-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACRN supports partition mode to achieve real-time requirements. In
partition mode, a CPU core can be dedicated to a vCPU of User VM. The
local APIC of the dedicated CPU core can be passthrough to the User VM.
The Service VM controls the assignment of the CPU cores.

Introduce an interface for the Service VM to remove the control of CPU
core from hypervisor perspective so that the CPU core can be a dedicated
CPU core of User VM.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-18-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqfd is a mechanism to inject a specific interrupt to a User VM using a
decoupled eventfd mechanism.

Vhost is a kernel-level virtio server which uses eventfd for interrupt
injection. To support vhost on ACRN, irqfd is introduced in HSM.

HSM provides ioctls to associate a virtual Message Signaled Interrupt
(MSI) with an eventfd. The corresponding virtual MSI will be injected
into a User VM once the eventfd got signal.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-17-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ioeventfd is a mechanism to register PIO/MMIO regions to trigger an
eventfd signal when written to by a User VM. ACRN userspace can register
any arbitrary I/O address with a corresponding eventfd and then pass the
eventfd to a specific end-point of interest for handling.

Vhost is a kernel-level virtio server which uses eventfd for signalling.
To support vhost on ACRN, ioeventfd is introduced in HSM.

A new I/O client dedicated to ioeventfd is associated with a User VM
during VM creation. HSM provides ioctls to associate an I/O region with
a eventfd. The I/O client signals a eventfd once its corresponding I/O
region is matched with an I/O request.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-16-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An I/O request of a User VM, which is constructed by hypervisor, is
distributed by the ACRN Hypervisor Service Module to an I/O client
corresponding to the address range of the I/O request.

I/O client maintains a list of address ranges. Introduce
acrn_ioreq_range_{add,del}() to manage these address ranges.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-15-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The C-states and P-states data are used to support CPU power management.
The hypervisor controls C-states and P-states for a User VM.

ACRN userspace need to query the data from the hypervisor to build ACPI
tables for a User VM.

HSM provides ioctls for ACRN userspace to query C-states and P-states
data obtained from the hypervisor.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-14-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACRN userspace need to inject virtual interrupts into a User VM in
devices emulation.

HSM needs provide interfaces to do so.

Introduce following interrupt injection interfaces:

ioctl ACRN_IOCTL_SET_IRQLINE:
  Pass data from userspace to the hypervisor, and inform the hypervisor
  to inject a virtual IOAPIC GSI interrupt to a User VM.

ioctl ACRN_IOCTL_INJECT_MSI:
  Pass data struct acrn_msi_entry from userspace to the hypervisor, and
  inform the hypervisor to inject a virtual MSI to a User VM.

ioctl ACRN_IOCTL_VM_INTR_MONITOR:
  Set a 4-Kbyte aligned shared page for statistics information of
  interrupts of a User VM.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-13-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI device passthrough enables an OS in a virtual machine to directly
access a PCI device in the host. It promises almost the native
performance, which is required in performance-critical scenarios of
ACRN.

HSM provides the following ioctls:
 - Assign - ACRN_IOCTL_ASSIGN_PCIDEV
   Pass data struct acrn_pcidev from userspace to the hypervisor, and
   inform the hypervisor to assign a PCI device to a User VM.

 - De-assign - ACRN_IOCTL_DEASSIGN_PCIDEV
   Pass data struct acrn_pcidev from userspace to the hypervisor, and
   inform the hypervisor to de-assign a PCI device from a User VM.

 - Set a interrupt of a passthrough device - ACRN_IOCTL_SET_PTDEV_INTR
   Pass data struct acrn_ptdev_irq from userspace to the hypervisor,
   and inform the hypervisor to map a INTx interrupt of passthrough
   device of User VM.

 - Reset passthrough device interrupt - ACRN_IOCTL_RESET_PTDEV_INTR
   Pass data struct acrn_ptdev_irq from userspace to the hypervisor,
   and inform the hypervisor to unmap a INTx interrupt of passthrough
   device of User VM.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-12-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A User VM can access its virtual PCI configuration spaces via port IO
approach, which has two following steps:
 1) writes address into port 0xCF8
 2) put/get data in/from port 0xCFC

To distribute a complete PCI configuration space access one time, HSM
need to combine such two accesses together.

Combine two paired PIO I/O requests into one PCI I/O request and
continue the I/O request distribution.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-11-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An I/O request of a User VM, which is constructed by the hypervisor, is
distributed by the ACRN Hypervisor Service Module to an I/O client
corresponding to the address range of the I/O request.

For each User VM, there is a shared 4-KByte memory region used for I/O
requests communication between the hypervisor and Service VM. An I/O
request is a 256-byte structure buffer, which is 'struct
acrn_io_request', that is filled by an I/O handler of the hypervisor
when a trapped I/O access happens in a User VM. ACRN userspace in the
Service VM first allocates a 4-KByte page and passes the GPA (Guest
Physical Address) of the buffer to the hypervisor. The buffer is used as
an array of 16 I/O request slots with each I/O request slot being 256
bytes. This array is indexed by vCPU ID.

An I/O client, which is 'struct acrn_ioreq_client', is responsible for
handling User VM I/O requests whose accessed GPA falls in a certain
range. Multiple I/O clients can be associated with each User VM. There
is a special client associated with each User VM, called the default
client, that handles all I/O requests that do not fit into the range of
any other I/O clients. The ACRN userspace acts as the default client for
each User VM.

The state transitions of a ACRN I/O request are as follows.

   FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...

FREE: this I/O request slot is empty
PENDING: a valid I/O request is pending in this slot
PROCESSING: the I/O request is being processed
COMPLETE: the I/O request has been processed

An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM
and ACRN userspace are in charge of processing the others.

The processing flow of I/O requests are listed as following:

a) The I/O handler of the hypervisor will fill an I/O request with
   PENDING state when a trapped I/O access happens in a User VM.
b) The hypervisor makes an upcall, which is a notification interrupt, to
   the Service VM.
c) The upcall handler schedules a worker to dispatch I/O requests.
d) The worker looks for the PENDING I/O requests, assigns them to
   different registered clients based on the address of the I/O accesses,
   updates their state to PROCESSING, and notifies the corresponding
   client to handle.
e) The notified client handles the assigned I/O requests.
f) The HSM updates I/O requests states to COMPLETE and notifies the
   hypervisor of the completion via hypercalls.

Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-10-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The HSM provides hypervisor services to the ACRN userspace. While
launching a User VM, ACRN userspace needs to allocate memory and request
the ACRN Hypervisor to set up the EPT mapping for the VM.

A mapping cache is introduced for accelerating the translation between
the Service VM kernel virtual address and User VM physical address.

>From the perspective of the hypervisor, the types of GPA of User VM can be
listed as following:
   1) RAM region, which is used by User VM as system ram.
   2) MMIO region, which is recognized by User VM as MMIO. MMIO region is
      used to be utilized for devices emulation.

Generally, User VM RAM regions mapping is set up before VM started and
is released in the User VM destruction. MMIO regions mapping may be set
and unset dynamically during User VM running.

To achieve this, ioctls ACRN_IOCTL_SET_MEMSEG and ACRN_IOCTL_UNSET_MEMSEG
are introduced in HSM.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-9-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A virtual CPU of User VM has different context due to the different
registers state. ACRN userspace needs to set the virtual CPU
registers state (e.g. giving a initial registers state to a virtual
BSP of a User VM).

HSM provides an ioctl ACRN_IOCTL_SET_VCPU_REGS to do the virtual CPU
registers state setting. The ioctl passes the registers state from ACRN
userspace to the hypervisor directly.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-8-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The VM management interfaces expose several VM operations to ACRN
userspace via ioctls. For example, creating VM, starting VM, destroying
VM and so on.

The ACRN Hypervisor needs to exchange data with the ACRN userspace
during the VM operations. HSM provides VM operation ioctls to the ACRN
userspace and communicates with the ACRN Hypervisor for VM operations
via hypercalls.

HSM maintains a list of User VM. Each User VM will be bound to an
existing file descriptor of /dev/acrn_hsm. The User VM will be
destroyed when the file descriptor is closed.

Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-7-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACRN Hypervisor Service Module (HSM) is a kernel module in Service VM
which communicates with ACRN userspace through ioctls and talks to ACRN
Hypervisor through hypercalls.

Add a basic HSM driver which allows Service VM userspace to communicate
with ACRN. The following patches will add more ioctls, guest VM memory
mapping caching, I/O request processing, ioeventfd and irqfd into this
module. HSM exports a char device interface (/dev/acrn_hsm) to userspace.

Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-6-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Service VM communicates with the hypervisor via conventional
hypercalls. VMCALL instruction is used to make the hypercalls.

ACRN hypercall ABI:
  * Hypercall number is in R8 register.
  * Up to 2 parameters are in RDI and RSI registers.
  * Return value is in RAX register.

Introduce the ACRN hypercall interfaces. Because GCC doesn't support R8
register as direct register constraints, use supported constraint as
input with a explicit MOV to R8 in beginning of asm.

Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fengwei Yin <fengwei.yin@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Originally-by: Yakui Zhao <yakui.zhao@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-5-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACRN Hypervisor reports hypervisor features via CPUID leaf 0x40000001
which is similar to KVM. A VM can check if it's the privileged VM using
the feature bits. The Service VM is the only privileged VM by design.

Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fengwei Yin <fengwei.yin@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-4-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ACRN Hypervisor builds an I/O request when a trapped I/O access
happens in User VM. Then, ACRN Hypervisor issues an upcall by sending
a notification interrupt to the Service VM. HSM in the Service VM needs
to hook the notification interrupt to handle I/O requests.

Notification interrupts from ACRN Hypervisor are already supported and
a, currently uninitialized, callback called.

Export two APIs for HSM to setup/remove its callback.

Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fengwei Yin <fengwei.yin@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Originally-by: Yakui Zhao <yakui.zhao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-3-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add documentation on the following aspects of ACRN:

  1) A brief introduction on the architecture of ACRN.
  2) I/O request handling in ACRN.
  3) CPUID functions of ACRN.

To learn more about ACRN, please go to ACRN project website
https://projectacrn.org, or the documentation page
https://projectacrn.github.io/.

Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Sen Christopherson <sean.j.christopherson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Fengwei Yin <fengwei.yin@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Yu Wang <yu1.wang@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210207031040.49576-2-shuo.a.liu@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma_map_sgtable() returns 0 on success, which is the opposite of what this
code was doing.

Fixes: 7cd7edb8 ("misc: fastrpc: fix common struct sg_table related issues")
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210208200401.31100-1-jonathan@marek.caSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some new MC firmware commands that can be received through the
userspace ioctl interface - *get_max_frame_length and *_get_counter.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210208170949.3070898-4-ciorneiioana@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A new object type was recently added in MC.  This has to be added in the
fsl-mc bus device type list so that it can be properly listed.
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210208170949.3070898-3-ciorneiioana@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "desc" pointer can't possibly be NULL here.  If we can't find the
correct "desc" then tt points to the last element of the
fsl_mc_accepted_cmds[] array.  Fix this by testing if
"i == FSL_MC_NUM_ACCEPTED_CMDS" instead.

Fixes: 2cf1e703 ("bus: fsl-mc: add fsl-mc userspace support")
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210208170949.3070898-2-ciorneiioana@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A driver that only consumes devm-managed resources might well have no
remove callback. Additionally given that the device core ignores the return
value of ipack_bus_remove() stop returning an error code.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20210207215556.96371-2-uwe@kleine-koenig.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A driver without a probe function isn't useful as it can never be used.
Let registering such a driver fail already instead of failing every
binding.

This is only cosmetic as there is no ipack driver without a probe function.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20210207215556.96371-1-uwe@kleine-koenig.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'misc-habanalabs-next-2021-02-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next

Oded writes:

This tag contains the following changes for 5.12-rc1:

- Improve communication protocol with device CPU CP application.
  The change prevents random (rare) out-of-sync errors.

- Notify F/W to start sending events only after initialization of
  device is done. This fixes the issue where fatal events were received
  but ignored.

- Fix integer handling (static analysis warning).

- Always fetch HBM ECC errors from F/W (if available).

- Minor fix in GAUDI-specific initialization code.

* tag 'misc-habanalabs-next-2021-02-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux:
  habanalabs/gaudi: don't enable clock gating on DMA5
  habanalabs: return block size + block ID
  habanalabs: update security map after init CPU Qs
  habanalabs: enable F/W events after init done
  habanalabs/gaudi: use HBM_ECC_EN bit for ECC ERR
  habanalabs: support fetching first available user CQ
  habanalabs: improve communication protocol with cpucp
  habanalabs: fix integer handling issue

Merge tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy-for-5.12

 - Updates:
   - Conversion to YAML binding for:
        - mtk-xsphy
        - mtk-tphy
        - mtk-ufs
	- HDMI PHY
	- MIPI DSI PHY
	- brcmstb-usb-phy
   - Support for BCM4908 usb phy
   - Support for Qualcomm SDX55 USB and QMP phy
   - Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy
   - Support for Qualcomm SDM660 USB and UFS phy
   - Support for Qualcomm SC8180X USB and UFS phy
   - Support for Qualcomm IPQ6018 USB phy
   - Stm32 phy updates

* tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits)
  phy: cpcap-usb: Simplify bool conversion
  phy: qcom-qmp: make a const array static, makes object smaller
  phy: zynqmp: Simplify code by using dev_err_probe()
  phy: qcom-qmp: Add support for SM8350 UFS phy
  phy: qcom-qmp: Add UFS V5 registers found in SM8350
  dt-bindings: phy: qcom,qmp: Add SM8350 UFS PHY bindings
  phy: qualcomm: usb28nm: Add MDM9607 init sequence
  dt-bindings: phy: qcom,qusb2: document ipq6018 compatible
  phy: qcom-qusb2: add QUSB2 support for IPQ6018
  phy: qcom-qmp: Add SC8180X USB phy
  phy: qcom-qmp: Add SC8180X UFS phy
  dt-bindings: phy: qcom,qmp: Add SC8180X USB phy
  dt-bindings: phy: qcom,qmp: Add SC8180X UFS to the QMP binding
  dt-bindings: phy: qcom-qusb2: Document SDM660 compatible
  phy: qcom-qusb2: Add configuration for SDM660
  phy: qcom-qusb2: Allow specifying default clock scheme
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM8250 and SM8350 bindings
  phy: qcom-qmp: Add SM8350 USB QMP PHYs
  dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings
  phy: qcom-qmp: Add support for SDX55 QMP PHY
  ...

Merge tag 'soundwire-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.12-rc1

Updates forv5.12-rc1 are:
 - New no_pm IO routines and the usage in Intel drivers
 - Intel driver & Cadence lib updates

* tag 'soundwire-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: bus: clarify dev_err/dbg device references
  soundwire: bus: fix confusion on device used by pm_runtime
  soundwire: export sdw_write/read_no_pm functions
  soundwire: bus: use no_pm IO routines for all interrupt handling
  soundwire: bus: use sdw_write_no_pm when setting the bus scale registers
  soundwire: bus: use sdw_update_no_pm when initializing a device
  soundwire: Revert "soundwire: debugfs: use controller id instead of link_id"
  soundwire: return earlier if no slave is attached
  soundwire: bus: add better dev_dbg to track complete() calls
  soundwire: cadence: adjust verbosity in response handling
  soundwire: cadence: fix ACK/NAK handling
  soundwire: bus: add more details to track failed transfers
  soundwire: cadence: add status in dev_dbg 'State change' log
  soundwire: use consistent format for Slave devID logs
  soundwire: intel: don't return error when clock stop failed
  soundwire: debugfs: use controller id instead of link_id
  MAINTAINERS: soundwire: Add soundwire tree
  soundwire: sysfs: Constify static struct attribute_group
  soundwire: cadence: reduce timeout on transactions
  soundwire: intel: Use kzalloc for allocating only one thing

Using of snprintf is discouraged in sysfs use the new sysfs_emit() API.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210208150649.141358-2-tomas.winkler@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Block data send with vtag if either transport layer or
FW client are not supporting vtags.

Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210208150649.141358-1-tomas.winkler@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver core ignores the return value of mei_cl_device_remove() so
passing an error value doesn't solve any problem. As most mei drivers'
remove callbacks return 0 unconditionally and returning a different value
doesn't have any effect, change this prototype to return void and return 0
unconditionally in mei_cl_device_remove(). The only driver that could
return an error value is modified to emit an explicit warning in the error
case.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208073705.428185-3-uwe@kleine-koenig.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver core only calls a bus' remove function when there is actually
a driver and a device. So drop the needless check and assign cldrv earlier.

(Side note: The check for cldev being non-NULL is broken anyhow, because
to_mei_cl_device() is a wrapper around container_of() for a member that is
not the first one. So cldev only can become NULL if dev is (void *)0xc
(for archs with 32 bit pointers) or (void *)0x18 (for archs with 64 bit
pointers).)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208073705.428185-2-uwe@kleine-koenig.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Graph Compiler uses DMA5 in a non-standard way and it requires the
driver to disable clock gating on that DMA.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

when reading CPU_BOOT_DEV_STS0 reg after FW reports SRAM AVAILABLE the
value in the register might not yet be updated by FW.
to overcome this issue another "up-to-date" read of this register is
done at the end of CPU queues init.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Only after the initialization of the device is done, the driver is
ready to receive events from the F/W. The driver can't handle events
before that because of races so it will ignore events. In case of
a fatal event, the driver won't know about it and the device will be
operational although it shouldn't be.

Same logic should be applied after hard-reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

driver should use ECC info from FW only if HBM ECC CAP is set.
otherwise, try to fetch the data from MC regs only if security is
disabled.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Current messaging communictaion protocol with cpucp can get out
of sync due to coherency issues. In order to improve the protocol
reliability, we modify the protocol to expect a different
acknowledgment for every packet sent to cpucp.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Need to add ull suffix to constant when doing shift of constant
into 64-bit variables
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The SoundWire bus code confuses bus and Slave device levels for
dev_err/dbg logs. That's not impacting functionality but the accuracy
of kernel logs.

We should only use bus->dev for bus-level operations and handling of
Device0. For all other logs where the device number is not zero, we
should use &slave->dev to provide more precisions to the
user/integrator.
Reported-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210122070634.12825-10-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>