- 29 Sep, 2011 4 commits
-
-
Jon Levell authored
My webcam is a Logitech C300 and I get "chipmunk"ed squeaky sound. The following trivial patch fixes it. Signed-off-by:
Jon Levell <linuxusb@coralbark.net> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Serge Hallyn authored
Add to the dev_state and alloc_async structures the user namespace corresponding to the uid and euid. Pass these to kill_pid_info_as_uid(), which can then implement a proper, user-namespace-aware uid check. Changelog: Sep 20: Per Oleg's suggestion: Instead of caching and passing user namespace, uid, and euid each separately, pass a struct cred. Sep 26: Address Alan Stern's comments: don't define a struct cred at usbdev_open(), and take and put a cred at async_completed() to ensure it lasts for the duration of kill_pid_info_as_cred(). Signed-off-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Dan Carpenter authored
"length" is type size_t so the cast to unsigned int truncates the upper bytes. This isn't an issue in real life (I've checked the callers) but it's a bit messy. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Rigbert Hamisch authored
add device ID for "HP un2430 Mobile Broadband Module" Signed-off-by:
Rigbert Hamisch <rigbert@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by:
-
- 26 Sep, 2011 27 commits
-
-
Matthias Dellweg authored
In the usb printer class specific request get_device_id the value of wIndex is (interface << 8 | altsetting) instead of just interface. This enables the detection of some printers with libusb. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Matthias Dellweg <2500@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by:
-
Serge Hallyn authored
Alan Stern points out that after spin_unlock(&ps->lock) there is no guarantee that ps->pid won't be freed. Since kill_pid_info_as_uid() is called after the spin_unlock(), the pid passed to it must be pinned. Reported-by:
-
Alan Stern authored
This patch (as1488) improves the comments and logic in uhci-hcd's suspend routine. The existing comments are hard to understand and don't give a good idea of what's really going on. The question of whether EGSM (Enter Global Suspend Mode) and RD (enable Resume Detect interrupts) can be useful when they're not both set is difficult. The spec doesn't give any details on how they interact with system wakeup, although clearly they are meant to be used together. To be safe, the patch changes the subroutine so that neither bit gets set unless they both do. There shouldn't be any functional changes from this; only systems that are designed badly or broken in some way need to avoid using those bits. Signed-off-by:
-
Alan Stern authored
This patch (as1486) implements the kernel's new wakeup policy for USB host controllers. Since they don't generate wakeup requests on their but merely forward requests from their root hubs toward the CPU, they should be enabled for wakeup by default. Also, to be compliant with both the old and new policies, root hubs should not be enabled for remote wakeup by default. Userspace must enable it explicitly if it is desired. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This removes the need of ifdefs within the init function and with it the headache about the correct clean without bus X but with bus/platform Y & Z. xhci-pci is only compiled if CONFIG_PCI is selected which can be de-selected now without trouble. For now the result is kinda useless because we have no other glue code. However, since nobody is using USB_ARCH_HAS_XHCI then it should not be an issue :) Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
xhci_gen_setup() is generic so it can be used to perform the bare xhci setup even on non-pci based platform. The typedef for the function pointer is moved into the headerfile Signed-off-by:
-
Sebastian Andrzej Siewior authored
xhci_pci_setup() is split into three pieces: - xhci_gen_setup() The major remaining of xhci_pci_setup() is now containing the generic part of the xhci setup. It allocates the xhci struct, setup hcs_params? and friends, performs xhci_halt(), xhci_init and so one. It also obtains the quirks via a callback - xhci_pci_quirks() It checks the origin of the xhci core and sets core specific quirks. - xhci_pci_setup() PCI specific setup functions. Besides calling xhci_gen_setup() with xhci_pci_quirks() as an argument it performs PCI specific setup like obtaining the address of sbrn via a PCI config space. Signed-off-by:
-
Sebastian Andrzej Siewior authored
pci_*_consistent() calls dma_*_coherent() with GFP_ATOMIC and requires pci_dev struct. This is a preparion for later where we no longer have the pci struct around. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The MSI related fuctionality requires a few structs which are not available if CONFIG_PCI is not enabled. This is a prepartion to allow xhci be built without CONFIG_PCI set. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This patch moves the complete MSI/MSI-X/Legacy dance into its own function. There is however one difference: If the XHCI_BROKEN_MSI flag is set then we don't free and register the irq, we simply return. This is preparation for later PCI decouple. Signed-off-by:
-
Felipe Balbi authored
to make it look like OHCI and EHCI, we introduce that symbol and USB_XHCI_HCD depend on that instead of PCI. [bigeasy@linutronix.de: wire up USB_ARCH_HAS_HCD] Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Andiry Xu authored
Fix the debug message in xhci_address_device(). Signed-off-by:
Andiry Xu <andiry.xu@amd.com> Signed-off-by:
-
Andiry Xu authored
Setting the chain (CH) bit in the link TRB of isochronous transfer rings is required by AMD 0.96 xHCI host controller to successfully transverse multi-TRB TD that span through different memory segments. When a Missed Service Error event occurs, if the chain bit is not set in the link TRB and the host skips TDs which just across a link TRB, the host may falsely recognize the link TRB as a normal TRB. You can see this may cause big trouble - the host does not jump to the right address which is pointed by the link TRB, but continue fetching the memory which is after the link TRB address, which may not even belong to the host, and the result cannot be predicted. This causes some big problems. Without the former patch I sent: "xHCI: prevent infinite loop when processing MSE event", the system may hang. With that patch applied, system does not hang, but the host still access wrong memory address and isoc transfer will fail. With this patch, isochronous transfer works as expected. This patch should be applied to kernels as old as 2.6.36, which was when the first isochronous support was added for the xHCI host controller. Signed-off-by:
-
Andiry Xu authored
This patch adds sysfs support to xHCI usb2 hardware LPM, so developer can enable and disable usb2 hardware LPM manually for test purpose. Signed-off-by:
-
Andiry Xu authored
If the device pass the USB2 software LPM and the host supports hardware LPM, enable hardware LPM for the device to let the host decide when to put the link into lower power state. If hardware LPM is enabled for a port and driver wants to put it into suspend, it must first disable hardware LPM, resume the port into U0, and then suspend the port. Signed-off-by:
-
Andiry Xu authored
This patch tests USB2 software LPM for a USB2 LPM-capable device. When a lpm-capable device is addressed, if the host also supports software LPM, apply a test by putting the device into L1 state and resume it to see if the device can do L1 suspend/resume successfully. If the device fails to enter L1 or resume from L1 state, it may not function normally and usbcore may disconnect and re-enumerate it. In this case, store the device's Vid and Pid information, make sure the host will not test LPM for it twice. The test result is per device/host. Some devices claim to be lpm-capable, but fail to enter L1 or resume. So the test is necessary. The xHCI 1.0 errata has modified the USB2.0 LPM implementation. It redefines the HIRD field to BESL, and adds another register Port Hardware LPM Control (PORTHLPMC). However, this should not affect the LPM behavior on xHC which does not implement 1.0 errata. USB2.0 LPM errata defines a new bit BESL in the device's USB 2.0 extension descriptor. If the device reports it uses BESL, driver should use BESL instead of HIRD for it. Signed-off-by:
-
Andiry Xu authored
Check the host's USB2 LPM capability. USB2 software LPM support is optional for xHCI 0.96 hosts. xHCI 1.0 hosts should support software LPM, and may support hardware LPM. Signed-off-by:
-
Andiry Xu authored
When the link state changes, xHC will report a port status change event and set the PORT_PLC bit, for both USB3 and USB2 root hub ports. The PLC will be cleared by usbcore for USB3 root hub ports, but not for USB2 ports, because they do not report USB_PORT_STAT_C_LINK_STATE in wPortChange. Clear it for USB2 root hub ports in handle_port_status(). Signed-off-by:
-
Andiry Xu authored
Introduce xhci_test_and_clear_bit() to clear RWC bit in PORTSC register. Signed-off-by:
-
Andiry Xu authored
Introduce xhci_set_link_state() to remove redundant codes. Signed-off-by:
-
Andiry Xu authored
Check device's LPM capability by examining the bmAttibutes field of the USB2.0 Extension Descriptor. Signed-off-by:
-
Andiry Xu authored
This commit gets BOS(Binary Device Object Store) descriptor set for Super Speed devices and High Speed devices which support BOS descriptor. BOS descriptor is used to report additional USB device-level capabilities that are not reported via the Device descriptor. By getting BOS descriptor set, driver can check device's device-level capability such as LPM capability. Signed-off-by:
-
Shaun Silk authored
Signed-off-by:
Shaun Silk <g0del@bigpond.com> Signed-off-by:
-
Matthieu CASTET authored
This allow to clean duplicated code in most of SOC driver. Signed-off-by:
Matthieu CASTET <castet.matthieu@free.fr> Acked-by:
-
Johannes Stezenbach authored
Report the number of dropped packets instead of zero when using the binary usbmon interface with tcpdump. # tcpdump -i usbmon1 -w dump tcpdump: listening on usbmon1, link-type USB_LINUX_MMAPPED (USB with padded Linux header), capture size 65535 bytes ^C2155 packets captured 2155 packets received by filter 1019 packets dropped by kernel Signed-off-by:
Johannes Stezenbach <js@sig21.net> Cc: stable <stable@kernel.org> Signed-off-by:
-
Felipe Balbi authored
We should not be using dev_get_drvdata() because we never call dev_set_drvdata(). Let's use container_of() as all other sysfs attributes. Signed-off-by:
-
Eric Benoit authored
Add vendor and product ID for the SMART USB to serial adapter. These were meant to be used with their SMART Board whiteboards, but can be re-purposed for other tasks. Tested and working (at at least 9600 bps). Signed-off-by:
Eric Benoit <eric@ecks.ca> Cc: stable <stable@kernel.org> Signed-off-by:
-
- 20 Sep, 2011 8 commits
-
-
Richard Hartmann authored
Simple patch to make qcserial recognize the USB id of the Sierra Wireless MC8355 which is based on the Gobi 3000 chip. Both UMTS and GPS work fine. Signed-off-by:
Richard Hartmann <richih.mailinglist@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Kautuk Consul authored
The seg argument to xhci_segment_free is never passed as NULL, so no need to check for this in xhci_segment_free. Signed-off-by:
Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by:
-
Kautuk Consul authored
There are 2 situations wherein the xhci_ring* might not get freed: - When xhci_ring_alloc() -> xhci_segment_alloc() returns NULL and we goto the fail: label in xhci_ring_alloc. In this case, the ring will not get kfreed. - When the num_segs argument to xhci_ring_alloc is passed as 0 and we try to free the rung after that. ( This doesn't really happen as of now in the code but we seem to be entertaining num_segs=0 in xhci_ring_alloc ) This should be backported to kernels as old as 2.6.31. Signed-off-by: -
Sarah Sharp authored
When a hot reset (standard USB port reset) fails on a USB 3.0 port, the host controller transitions to the "Error" state. It reports the port link state as "Inactive", sets the link state change flag, and (if the device disconnects) also reports the disconnect and connect change status. It's also supposed to transition the link state to "RxDetect", but the NEC µPD720200 xHCI host does not. Unfortunately, Harald found that the combination of the NEC µPD720200 and a LogiLink USB 3.0 to SATA adapter triggered this issue. The USB core would reset the device, the port would go into this error state, and the device would never be enumerated. This combination works under Windows, but not under Linux. When a hot reset fails on a USB 3.0 port, and the link state is reported as Inactive, fall back to a warm port reset instead. Harald confirms that with a warm port reset (along with all the change bits being correctly cleared), the USB 3.0 device will successfully enumerate. Harald also had to add two other patches ("xhci: Set change bit when warm reset change is set." and "usbcore: refine warm reset logic") to make this setup work. Since the warm reset refinement patch is not destined for the stable kernels (it's too big), this patch should not be backported either. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=41752Signed-off-by:Harald Brennich <harald.brennich@gmx.de> Signed-off-by:
-
Sarah Sharp authored
The Intel Panther Point xHCI host tracks SuperSpeed endpoints in a different way than USB 2.0/1.1 endpoints. The bandwidth interval tables are not used, and instead the bandwidth is calculated in a very simple way. Bandwidth for SuperSpeed endpoints is tracked individually in each direction, since each direction has the full USB 3.0 bandwidth available. 10% of the bus bandwidth is reserved for non-periodic transfers. This checking would be more complex if we had USB 3.0 LPM enabled, because an additional latency for isochronous ping times need to be taken into account. However, we don't have USB 3.0 LPM support in Linux yet. Signed-off-by:
-
Sarah Sharp authored
The "Mult" bits in the SuperSpeed Endpoint Companion Descriptor are zero-based, and the xHCI host controller wants them to be zero-based in the input context. However, for the bandwidth math, we want them to be one-based. Fix this. Fix the documentation about the endpoint bandwidth mult variable in the xhci.h file, which says it is zero-based. Also fix the documentation about num_packets, which is also one-based, not zero-based. Signed-off-by:
-
Andiry Xu authored
Current waiting time for warm(BH) reset in hub_port_warm_reset() is too short for xHC host to complete the warm reset and report a BH reset change. This patch increases the waiting time for warm reset and merges the function into hub_port_reset(), so it can handle both cold reset and warm reset, and factor out hub_port_finish_reset() to make the code looks cleaner. This fixes the issue that driver fails to clear BH reset change and port is "dead". Signed-off-by:
-
Sebastian Andrzej Siewior authored
instead of reading the xhci interface version each time _even_ if the quirk is not required, simply check if the quirk flag is set. This flag is only set of the module parameter is set and here is where I moved the version check to. Signed-off-by:
-
- 18 Sep, 2011 1 commit
-
-
edwin_rong authored
After auto-delink command is triggered, the CSW won't be sent back to host side, in which scenario, the USB Mass Storage driver will wait for the completion of the URB for MAX_SCHEDULE_TIMEOUT. Signed-off-by:
edwin_rong <edwin_rong@realsil.com.cn> Signed-off-by:
-
