time_stats::btree_gc_max_duration_mc is not bit shifted by 8

Fixes BUG #138

Change-Id: I44fc6e1d0579674016acc533f1a546b080e5371a
Signed-off-by: Surbhi Palande <sap@daterainc.com>

bcache_flash_dev.ktest would reliably crash with 8k and 16k bucket size
before; now it passes.

Change-Id: Ib542232235e39298c3a7548fe52b645cabb823d1

If register_cache_set() failed, we would touch ca->set after
it had already been freed. Also, fix an assertion to catch
this.

Change-Id: I748e5f5b223e2d9b2602075dec2f997cced2394d

Change-Id: I6abde52afe917633480caaf4e2518f42a816d886

Signed-off-by: Kent Overstreet <kmo@daterainc.com>

If we goto out_nocoalesce after we free new_nodes[0], we end up freeing
new_nodes[0] again. This was generating a lockdep warning. The fix is
to set new_nodes[0] to NULL, since the out_nocoalesce path safely
ignores NULL entries in the new_nodes array.

This regression was introduced in 2d7f9531.

Change-Id: I76564d7257800583214376b4bacf236cda90c89c

When running with multiple cache devices, if one of the devices has a completely
empty journal but we'd already found some journal entries on a previosu device
we'd go into an infinite loop.

Change-Id: I1dcdc0d738192746de28f40e8b08825b0dea5e2b
Signed-off-by: Kent Overstreet <kmo@daterainc.com>

'b' was NULL.

Change-Id: Icac0fd04afa2d23f213d96d51afd53374e6dd0c0

Signed-off-by: Kent Overstreet <kmo@daterainc.com>

Signed-off-by: Kent Overstreet <kmo@daterainc.com>

There's no point in blocking on these allocations, since our fallback paths will
probably go faster than blocking.

Change-Id: I733ca202c25cb36bde02607a0a60552229a4241c

this was very wrong - mempool_alloc() only guarantees success with GFP_WAIT.
bcache uses GFP_NOWAIT in various other places where we have a fallback,
circuits must've gotten crossed when writing this code or something.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>

There were two issues here:

- writeback thread did not start until the device first became dirty
- writeback thread used uninterruptible sleep once running

Without this patch I see kernel warnings printed and a load average of
1.52 after booting my test VM. With this patch the warnings are gone and
the load average is near 0.00 as expected.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>

Tested:
- sometimes bcache_tier test would hang on startup with a failure
  to allocate the btree root -- no longer seeing this
Signed-off-by: Kent Overstreet <kmo@daterainc.com>

We never started the writeback thread in this case, so don't stop it.

while loop was executing infinitely.
This fix ends the while loop gracefully.
Signed-off-by: Surbhi Palande <sap@daterainc.com>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>

journal replay wansn't validating pointers with bch_extent_invalid() before
derefing, fixed
Signed-off-by: Kent Overstreet <kmo@daterainc.com>

After detaching a backing device from a cache set, a bit wasn't getting
reset meaning the second detach wouldn't work correctly.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>

Pull ARM fixes from Russell King:
 "Another round of ARM fixes.  The largest change here is the L2 changes
  to work around problems for the Armada 37x/380 devices, where most of
  the size comes down to comments rather than code.

  The other significant fix here is for the ptrace code, to ensure that
  rewritten syscalls work as intended.  This was pointed out by Kees
  Cook, but Will Deacon reworked the patch to be more elegant.

  The remainder are fairly trivial changes"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8087/1: ptrace: reload syscall number after secure_computing() check
  ARM: 8086/1: Set memblock limit for nommu
  ARM: 8085/1: sa1100: collie: add top boot mtd partition
  ARM: 8084/1: sa1100: collie: revert back to cfi_probe
  ARM: 8080/1: mcpm.h: remove unused variable declaration
  ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache

Note that I don't maintain Documentation/ABI/,
Documentation/devicetree/, or the language translation files.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These days most people use git to send patches so I have added a section
about that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On the syscall tracing path, we call out to secure_computing() to allow
seccomp to check the syscall number being attempted. As part of this, a
SIGTRAP may be sent to the tracer and the syscall could be re-written by
a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall
is ignored by the current code unless TIF_SYSCALL_TRACE is also set on
the current thread.

This patch slightly reworks the enter path of the syscall tracing code
so that we always reload the syscall number from
current_thread_info()->syscall after the potential ptrace traps.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit 1c2f87c2 (ARM: 8025/1: Get rid of meminfo) changed find_limits
to use memblock_get_current_limit for calculating the max_low pfn.
nommu targets never actually set a limit on memblock though which
means memblock_get_current_limit will just return the default
value. Set the memblock_limit to be the end of DDR to make sure
bounds are calculated correctly.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The CFI mapping is now perfect so we can expose the top block, read only.
There isn't much to read, though, just the sharpsl_params values.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Reverts commit d26b17ed
ARM: sa1100: collie.c: fall back to jedec_probe flash detection

Unfortunately the detection was challenged on the defective unit used for tests:
one of the NOR chips did not respond to the CFI query.
Moreover that bad device needed extra delays on erase-suspend/resume cycles.

Tested personally on 3 different units and with feedback of two other users.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The sync_phys variable has been replaced by link time computation in
mcpm_head.S before the code was submitted upstream.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When a PL310 cache is used on a system that provides hardware
coherency, the outer cache sync operation is useless, and can be
skipped. Moreover, on some systems, it is harmful as it causes
deadlocks between the Marvell coherency mechanism, the Marvell PCIe
controller and the Cortex-A9.

To avoid this, this commit introduces a new Device Tree property
'arm,io-coherent' for the L2 cache controller node, valid only for the
PL310 cache. It identifies the usage of the PL310 cache in an I/O
coherent configuration. Internally, it makes the driver disable the
outer cache sync operation.

Note that technically speaking, a fully coherent system wouldn't
require any of the other .outer_cache operations. However, in
practice, when booting secondary CPUs, these are not yet coherent, and
therefore a set of cache maintenance operations are necessary at this
point. This explains why we keep the other .outer_cache operations and
only ->sync is disabled.

While in theory any write to a PL310 register could cause the
deadlock, in practice, disabling ->sync is sufficient to workaround
the deadlock, since the other cache maintenance operations are only
used in very specific situations.

Contrary to previous versions of this patch, this new version does not
simply NULL-ify the ->sync member, because the l2c_init_data
structures are now 'const' and therefore cannot be modified, which is
a good thing. Therefore, this patch introduces a separate
l2c_init_data instance, called of_l2c310_coherent_data.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull spi fixes from Mark Brown:
 "A few driver specific fixes, the biggest one being a fix for the newly
  added Qualcomm SPI controller driver to make it not use its internal
  chip select due to hardware bugs, replacing it with GPIOs"

* tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: qup: Remove chip select function
  spi: qup: Fix order of spi_register_master
  spi: sh-sci: fix use-after-free in sh_sci_spi_remove()
  spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI

Pull regulator fixes from Mark Brown:
 "Several driver specific fixes here, the palmas fixes being especially
  important for a range of boards - the recent updates to support new
  devices have introduced several regressions"

* tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65218: Correct the the config register for LDO1
  regulator: tps65218: Add the missing of_node assignment in probe
  regulator: palmas: fix typo in enable_reg calculation
  regulator: bcm590xx: fix vbus name
  regulator: palmas: Fix SMPS enable/disable/is_enabled

Pull SCSI target fixes from Nicholas Bellinger:
 "Mostly minor fixes this time around.  The highlights include:

   - iscsi-target CHAP authentication fixes to enforce explicit key
     values (Tejas Vaykole + rahul.rane)
   - fix a long-standing OOPs in target-core when a alua configfs
     attribute is accessed after port symlink has been removed.
     (Sebastian Herbszt)
   - fix a v3.10.y iscsi-target regression causing the login reject
     status class/detail to be ignored (Christoph Vu-Brugier)
   - fix a v3.10.y iscsi-target regression to avoid rejecting an
     existing ITT during Data-Out when data-direction is wrong (Santosh
     Kulkarni + Arshad Hussain)
   - fix a iscsi-target related shutdown deadlock on UP kernels (Mikulas
     Patocka)
   - fix a v3.16-rc1 build issue with vhost-scsi + !CONFIG_NET (MST)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: fix iscsit_del_np deadlock on unload
  iovec: move memcpy_from/toiovecend to lib/iovec.c
  iscsi-target: Avoid rejecting incorrect ITT for Data-Out
  tcm_loop: Fix memory leak in tcm_loop_submission_work error path
  iscsi-target: Explicily clear login response PDU in exception path
  target: Fix left-over se_lun->lun_sep pointer OOPs
  iscsi-target; Enforce 1024 byte maximum for CHAP_C key value
  iscsi-target: Convert chap_server_compute_md5 to use kstrtoul

Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/palmas' and 'regulator/fix/tps65218' into regulator-linus

On uniprocessor preemptible kernel, target core deadlocks on unload. The
following events happen:
* iscsit_del_np is called
* it calls send_sig(SIGINT, np->np_thread, 1);
* the scheduler switches to the np_thread
* the np_thread is woken up, it sees that kthread_should_stop() returns
  false, so it doesn't terminate
* the np_thread clears signals with flush_signals(current); and goes back
  to sleep in iscsit_accept_np
* the scheduler switches back to iscsit_del_np
* iscsit_del_np calls kthread_stop(np->np_thread);
* the np_thread is waiting in iscsit_accept_np and it doesn't respond to
  kthread_stop

The deadlock could be resolved if the administrator sends SIGINT signal to
the np_thread with killall -INT iscsi_np

The reproducible deadlock was introduced in commit
db6077fd, but the thread-stopping code was
racy even before.

This patch fixes the problem. Using kthread_should_stop to stop the
np_thread is unreliable, so we test np_thread_state instead. If
np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Pull IOMMU fixes from Joerg Roedel:

 - fix VT-d regression with handling multiple RMRR entries per device

 - fix a small race that was left in the mmu_notifier handling in the
   AMD IOMMUv2 driver

* tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix small race between invalidate_range_end/start
  iommu/vt-d: fix bug in handling multiple RMRRs for the same PCI device

Pull x86 fixes from Peter Anvin:
 "A pile of fixes related to the VDSO, EFI and 32-bit badsys handling.

  It turns out that removing the section headers from the VDSO breaks
  gdb, so this puts back most of them.  A very simple typo broke
  rt_sigreturn on some versions of glibc, with obviously disastrous
  results.  The rest is pretty much fixes for the corresponding fallout.

  The EFI fixes fixes an arithmetic overflow on 32-bit systems and
  quiets some build warnings.

  Finally, when invoking an invalid system call number on x86-32, we
  bypass a bunch of handling, which can make the audit code oops"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi-pstore: Fix an overflow on 32-bit builds
  x86/vdso: Error out in vdso2c if DT_RELA is present
  x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile
  x86_32, signal: Fix vdso rt_sigreturn
  x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)
  x86/vdso: Create .build-id links for unstripped vdso files
  x86/vdso: Remove some redundant in-memory section headers
  x86/vdso: Improve the fake section headers
  x86/vdso2c: Use better macros for ELF bitness
  x86/vdso: Discard the __bug_table section
  efi: Fix compiler warnings (unused, const, type)

Pull MIPS fixes from Ralf Baechle:
 "This is dominated by a large number of changes necessary for the MIPS
  BPF code.  code.  Aside of that there are

   - a fix for the MSC system controller support code.
   - a Turbochannel fix.
   - a recordmcount fix that's MIPS-specific.
   - barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere
     in the kernel.
   - revert support for MSA registers in the signal frames.  The
     reverted patch did modify the signal stack frame which of course is
     inacceptable.
   - fix math-emu build breakage with older compilers.
   - some related cleanup.
   - fix Lasat build error if CONFIG_CRC32 isn't set to y by the user"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits)
  MIPS: Lasat: Fix build error if CRC32 is not enabled.
  TC: Handle device_register() errors.
  MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region
  MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64
  MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register
  MIPS: bpf: Fix PKT_TYPE case for big-endian cores
  MIPS: BPF: Prevent kernel fall over for >=32bit shifts
  MIPS: bpf: Drop update_on_xread and always initialize the X register
  MIPS: bpf: Fix is_range() semantics
  MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes
  MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case
  MIPS: bpf: Use correct mask for VLAN_TAG case
  MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases
  MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE
  MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases
  MIPS: bpf: Return error code if the offset is a negative number
  MIPS: bpf: Use the LO register to get division's quotient
  MIPS: mm: uasm: Fix lh micro-assembler instruction
  MIPS: uasm: Add SLT uasm instruction
  MIPS: uasm: Add s3s1s2 instruction builder
  ...

Pull ARC fixes from Vineet Gupta:
 "Some SMP changes, a ptrace request for NPTL debugging, bunch of build
  breakages/warnings"

* tag 'arc-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [SMP] Enable icache coherency
  ARC: [SMP] Fix IPI IRQ registration
  ARC: Implement ptrace(PTRACE_GET_THREAD_AREA)
  ARC: optimize kernel bss clearing in early boot code
  ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWIND
  ARC: fix build warning in devtree
  ARC: remove checks for CONFIG_ARC_MMU_V4