- 03 May, 2021 6 commits
-
-
Shyam Prasad N authored
When the tcp connection is not ready to send requests, we keep retrying echo with an interval of zero. This seems unnecessary, and this fix changes the interval between echoes to what is specified as echo_interval. Signed-off-by:
Shyam Prasad N <sprasad@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com>
-
Shyam Prasad N authored
We can detect server unresponsiveness only if echoes are enabled. Echoes can be disabled under two scenarios: 1. The connection is low on credits, so we've disabled echoes/oplocks. 2. The connection has not seen any request till now (other than negotiate/sess-setup), which is when we enable these two, based on the credits available. So this fix will check for dead connection, only when echo is enabled. Signed-off-by:
-
Steve French authored
When mounted multiuser it is hard to dump keys for the other sessions which makes it hard to debug using network traces (e.g. using wireshark). Suggested-by:
-
Steve French authored
Previously we were only able to dump CCM or GCM-128 keys (see "smbinfo keys" e.g.) to allow network debugging (e.g. wireshark) of mounts to SMB3.1.1 encrypted shares. But with the addition of GCM-256 support, we have to be able to dump 32 byte instead of 16 byte keys which requires adding an additional ioctl for that. Reviewed-by:
-
Steve French authored
Various filesystem support the shutdown ioctl which is used by various xfstests. The shutdown ioctl sets a flag on the superblock which prevents open, unlink, symlink, hardlink, rmdir, create etc. on the file system until unmount and remounted. The two flags supported in this patch are: FSOP_GOING_FLAGS_LOGFLUSH and FSOP_GOING_FLAGS_NOLOGFLUSH which require very little other than blocking new operations (since we do not cache writes to metadata on the client with cifs.ko). FSOP_GOING_FLAGS_DEFAULT is not supported yet, but could be added in the future but would need to call syncfs or equivalent to write out pending data on the mount. With this patch various xfstests now work including tests 043 through 046 for example. Signed-off-by:
Aurelien Aptel <aaptel@suse.com>
-
Rohith Surabattula authored
When file is closed, SMB2 close request is not sent to server immediately and is deferred for acregmax defined interval. When file is reopened by same process for read or write, the file handle is reused if an oplock is held. When client receives a oplock/lease break, file is closed immediately if reference count is zero, else oplock is downgraded. Signed-off-by:
Rohith Surabattula <rohiths@microsoft.com> Reviewed-by:
-
- 28 Apr, 2021 1 commit
-
-
Steve French authored
Now that stronger encryption (gcm256) has been more broadly tested, and confirmed to work with multiple servers (Windows and Azure for example), enable it by default. Although gcm256 is the second choice we offer (after gcm128 which should be faster), this change allows mounts to server which are configured to require the strongest encryption to work (without changing a module load parameter). Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
-
- 26 Apr, 2021 2 commits
-
-
Steve French authored
To 2.32 Signed-off-by: -
Steve French authored
In some cases readahead of more than the read size can help (to allow parallel i/o of read ahead which can improve performance). Ceph introduced a mount parameter "rasize" to allow controlling this. Add mount parameter "rasize" to allow control of amount of readahead requested of the server. If rasize not set, rasize defaults to negotiated rsize as before. Reviewed-by:
-
- 25 Apr, 2021 31 commits
-
-
Steve French authored
For servers which don't support copy_range (SMB3 CopyChunk), the logging of: CIFS: VFS: \\server\share refcpy ioctl error -95 getting resume key can fill the client logs and make debugging real problems more difficult. Change the -EOPNOTSUPP on copy_range to a "warn once" Signed-off-by: -
David Disseldorp authored
cifs_smb3_do_mount() calls smb3_fs_context_dup() and then cifs_setup_volume_info(). The latter's subsequent smb3_parse_devname() call overwrites the cifs_sb->ctx->UNC string already dup'ed by smb3_fs_context_dup(), resulting in a leak. E.g. unreferenced object 0xffff888002980420 (size 32): comm "mount", pid 160, jiffies 4294892541 (age 30.416s) hex dump (first 32 bytes): 5c 5c 31 39 32 2e 31 36 38 2e 31 37 34 2e 31 30 \\192.168.174.10 34 5c 72 61 70 69 64 6f 2d 73 68 61 72 65 00 00 4\rapido-share.. backtrace: [<00000000069e12f6>] kstrdup+0x28/0x50 [<00000000b61f4032>] smb3_fs_context_dup+0x127/0x1d0 [cifs] [<00000000c6e3e3bf>] cifs_smb3_do_mount+0x77/0x660 [cifs] [<0000000063467a6b>] smb3_get_tree+0xdf/0x220 [cifs] [<00000000716f731e>] vfs_get_tree+0x1b/0x90 [<00000000491d3892>] path_mount+0x62a/0x910 [<0000000046b2e774>] do_mount+0x50/0x70 [<00000000ca7b64dd>] __x64_sys_mount+0x81/0xd0 [<00000000b5122496>] do_syscall_64+0x33/0x40 [<000000002dd397af>] entry_SYSCALL_64_after_hwframe+0x44/0xae This change is a bandaid until the cifs_setup_volume_info() TODO and error handling issues are resolved. Signed-off-by:David Disseldorp <ddiss@suse.de> Acked-by:
Paulo Alcantara (SUSE) <pc@cjr.nz> CC: <stable@vger.kernel.org> # v5.11+ Signed-off-by:
-
Muhammad Usama Anjum authored
pfid is being set to tcon->crfid.fid and they are copied in each other multiple times. Remove the memcopy between same pointers - memory locations. Addresses-Coverity: ("Overlapped copy") Fixes: 9e81e8ff ("cifs: return cached_fid from open_shroot") Signed-off-by:Muhammad Usama Anjum <musamaanjum@gmail.com> Reviewed-by:
-
Paul Aurich authored
Avoid a warning if the error percolates back up: [440700.376476] CIFS VFS: \\otters.example.com crypt_message: Could not get encryption key [440700.386947] ------------[ cut here ]------------ [440700.386948] err = 1 [440700.386977] WARNING: CPU: 11 PID: 2733 at /build/linux-hwe-5.4-p6lk6L/linux-hwe-5.4-5.4.0/lib/errseq.c:74 errseq_set+0x5c/0x70 ... [440700.397304] CPU: 11 PID: 2733 Comm: tar Tainted: G OE 5.4.0-70-generic #78~18.04.1-Ubuntu ... [440700.397334] Call Trace: [440700.397346] __filemap_set_wb_err+0x1a/0x70 [440700.397419] cifs_writepages+0x9c7/0xb30 [cifs] [440700.397426] do_writepages+0x4b/0xe0 [440700.397444] __filemap_fdatawrite_range+0xcb/0x100 [440700.397455] filemap_write_and_wait+0x42/0xa0 [440700.397486] cifs_setattr+0x68b/0xf30 [cifs] [440700.397493] notify_change+0x358/0x4a0 [440700.397500] utimes_common+0xe9/0x1c0 [440700.397510] do_utimes+0xc5/0x150 [440700.397520] __x64_sys_utimensat+0x88/0xd0 Fixes: 61cfac6f ("CIFS: Fix possible use after free in demultiplex thread") Signed-off-by:
Paul Aurich <paul@darkrain42.org> CC: stable@vger.kernel.org Signed-off-by:
-
Eugene Korenevsky authored
If smb3_notify() is called at mount point of CIFS, build_path_from_dentry() returns the pointer to kmalloc-ed memory with terminating zero (this is empty FileName to be passed to SMB2 CREATE request). This pointer is assigned to the `path` variable. Then `path + 1` (to skip first backslash symbol) is passed to cifs_convert_path_to_utf16(). This is incorrect for empty path and causes out-of-bound memory access. Get rid of this "increase by one". cifs_convert_path_to_utf16() already contains the check for leading backslash in the path. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212693 CC: <stable@vger.kernel.org> # v5.6+ Signed-off-by:
Eugene Korenevsky <ekorenevsky@astralinux.ru> Signed-off-by:
-
Aurelien Aptel authored
* rqst[1,2,3] is allocated in vars * each rqst->rq_iov is also allocated in vars or using pooled memory SMB2_open_free, SMB2_ioctl_free, SMB2_query_info_free are iterating on each rqst after vars has been freed (use-after-free), and they are freeing the kvec a second time (double-free). How to trigger: * compile with KASAN * mount a share $ smbinfo quota /mnt/foo Segmentation fault $ dmesg ================================================================== BUG: KASAN: use-after-free in SMB2_open_free+0x1c/0xa0 Read of size 8 at addr ffff888007b10c00 by task python3/1200 CPU: 2 PID: 1200 Comm: python3 Not tainted 5.12.0-rc6+ #107 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack+0x93/0xc2 print_address_description.constprop.0+0x18/0x130 ? SMB2_open_free+0x1c/0xa0 ? SMB2_open_free+0x1c/0xa0 kasan_report.cold+0x7f/0x111 ? smb2_ioctl_query_info+0x240/0x990 ? SMB2_open_free+0x1c/0xa0 SMB2_open_free+0x1c/0xa0 smb2_ioctl_query_info+0x2bf/0x990 ? smb2_query_reparse_tag+0x600/0x600 ? cifs_mapchar+0x250/0x250 ? rcu_read_lock_sched_held+0x3f/0x70 ? cifs_strndup_to_utf16+0x12c/0x1c0 ? rwlock_bug.part.0+0x60/0x60 ? rcu_read_lock_sched_held+0x3f/0x70 ? cifs_convert_path_to_utf16+0xf8/0x140 ? smb2_check_message+0x6f0/0x6f0 cifs_ioctl+0xf18/0x16b0 ? smb2_query_reparse_tag+0x600/0x600 ? cifs_readdir+0x1800/0x1800 ? selinux_bprm_creds_for_exec+0x4d0/0x4d0 ? do_user_addr_fault+0x30b/0x950 ? __x64_sys_openat+0xce/0x140 __x64_sys_ioctl+0xb9/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fdcf1f4ba87 Code: b3 66 90 48 8b 05 11 14 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 13 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffef1ce7748 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000c018cf07 RCX: 00007fdcf1f4ba87 RDX: 0000564c467c5590 RSI: 00000000c018cf07 RDI: 0000000000000003 RBP: 00007ffef1ce7770 R08: 00007ffef1ce7420 R09: 00007fdcf0e0562b R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000004018 R13: 0000000000000001 R14: 0000000000000003 R15: 0000564c467c5590 Allocated by task 1200: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7a/0x90 smb2_ioctl_query_info+0x10e/0x990 cifs_ioctl+0xf18/0x16b0 __x64_sys_ioctl+0xb9/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 1200: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xe5/0x110 slab_free_freelist_hook+0x53/0x130 kfree+0xcc/0x320 smb2_ioctl_query_info+0x2ad/0x990 cifs_ioctl+0xf18/0x16b0 __x64_sys_ioctl+0xb9/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff888007b10c00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes inside of 512-byte region [ffff888007b10c00, ffff888007b10e00) The buggy address belongs to the page: page:0000000044e14b75 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7b10 head:0000000044e14b75 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 ffffea000015f500 0000000400000004 ffff888001042c80 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888007b10b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888007b10b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888007b10c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888007b10c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888007b10d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Signed-off-by: -
Aurelien Aptel authored
Can aid in making mount problems easier to diagnose Signed-off-by:
-
Aurelien Aptel authored
This makes the errors accessible from userspace via dmesg and the fs_context fd. Signed-off-by:
-
Aurelien Aptel authored
Add fs_context param to parsing helpers to be able to log into it in next patch. Make some helper static as they are not used outside of fs_context.c Signed-off-by:
-
Aurelien Aptel authored
This new helper will be used in the fs_context mount option parsing code. It log errors both in: * the fs_context log queue for userspace to read * kernel printk buffer (dmesg, old behaviour) Signed-off-by:
-
Ronnie Sahlberg authored
Emulated via server side copy and setsize for SMB3 and later. In the future we could compound this (and/or optionally use DUPLICATE_EXTENTS if supported by the server). Signed-off-by:
-
Ronnie Sahlberg authored
Emulated for SMB3 and later via server side copy and setsize. Eventually this could be compounded. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ronnie Sahlberg authored
Improves directory metadata caching Signed-off-by:
-
Ronnie Sahlberg authored
Needed for the final patch in the directory caching series Signed-off-by:
-
Ronnie Sahlberg authored
and clear the timestamp when we receive a lease break. Signed-off-by:
-
Ronnie Sahlberg authored
Needed for subsequent patches in the directory caching series. Signed-off-by:
-
Ronnie Sahlberg authored
We need to hold both a reference for the root/superblock as well as the directory that we are caching. We need to drop these references before we call kill_anon_sb(). At this point, the root and the cached dentries are always the same but this will change once we start caching other directories as well. Signed-off-by:
-
Ronnie Sahlberg authored
And use this to only allow to take out a shared handle once the mount has completed and the sb becomes available. This will become important in follow up patches where we will start holding a reference to the directory dentry for the shared handle during the lifetime of the handle. Signed-off-by:
-
Ronnie Sahlberg authored
These functions will eventually be used to cache any directory, not just the root so change the names. Signed-off-by:
-
Ronnie Sahlberg authored
Move the check for the directory path into the open_shroot() function but still fail for any non-root directories. This is preparation for later when we will start using the cache also for other directories than the root. Signed-off-by:
-
Ronnie Sahlberg authored
instead of doing it in the callsites for open_shroot. Signed-off-by:
-
Al Viro authored
The cost is that we might need to flip '/' to '\\' in more than just the prefix. Needs profiling, but I suspect that we won't get slowdown on that. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
build_path_from_dentry() open-codes dentry_path_raw(). The reason we can't use dentry_path_raw() in there (and postprocess the result as needed) is that the callers of build_path_from_dentry() expect that the object to be freed on cleanup and the string to be used are at the same address. That's painful, since the path is naturally built end-to-beginning - we start at the leaf and go through the ancestors, accumulating the pathname. Life would be easier if we left the buffer allocation to callers. It wouldn't be exact-sized buffer, but none of the callers keep the result for long - it's always freed before the caller returns. So there's no need to do exact-sized allocation; better use __getname()/__putname(), same as we do for pathname arguments of syscalls. What's more, there's no need to do allocation under spinlocks, so GFP_ATOMIC is not needed. Next patch will replace the open-coded dentry_path_raw() (in build_path_from_dentry_optional_prefix()) with calling the real thing. This patch only introduces wrappers for allocating/freeing the buffers and switches to new calling conventions: build_path_from_dentry(dentry, buf) expects buf to be address of a page-sized object or NULL, return value is a pathname built inside that buffer on success, ERR_PTR(-ENOMEM) if buf is NULL and ERR_PTR(-ENAMETOOLONG) if the pathname won't fit into page. Note that we don't need to check for failure when allocating the buffer in the caller - build_path_from_dentry() will do the right thing. Signed-off-by:
-
Al Viro authored
... and adjust the callers. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
As it is, it takes const char * and, in some cases, stores it in caller's variable that is plain char *. Fortunately, none of the callers actually proceeded to modify the string via now-non-const alias, but that's trouble waiting to happen. It's easy to do properly, anyway... Signed-off-by:
-
Al Viro authored
strndup(s, strlen(s)) is a highly unidiomatic way to spell strdup(s); it's *NOT* safer in any way, since strlen() is just as sensitive to NUL-termination as strdup() is. strndup() is for situations when you need a copy of a known-sized substring, not a magic security juju to drive the bad spirits away. Signed-off-by:
-
Steve French authored
Protocol has been extended for additional compression headers. See MS-SMB2 section 2.2.42 Signed-off-by: -
Aurelien Aptel authored
While reviewing a patch clarifying locks and locking hierarchy I realized some locks were unused. This commit removes old data and code that isn't actually used anywhere, or hidden in ifdefs which cannot be enabled from the kernel config. * The uid/gid trees and associated locks are left-overs from when uid/sid mapping had an extra caching layer on top of the keyring and are now unused. See commit faa65f07 ("cifs: simplify id_to_sid and sid_to_id mapping code") from 2012. * cifs_oplock_break_ops is a left-over from when slow_work was remplaced by regular workqueue and is now unused. See commit 9b646972 ("cifs: use workqueue instead of slow-work") from 2010. * CIFSSMBSetAttrLegacy is SMB1 cruft dealing with some legacy NT4/Win9x behaviour. * Remove CONFIG_CIFS_DNOTIFY_EXPERIMENTAL left-overs. This was already partially removed in 392e1c5d ("cifs: rename and clarify CIFS_ASYNC_OP and CIFS_NO_RESP") from 2019. Kill it completely. * Another candidate that was considered but spared is CONFIG_CIFS_NFSD_EXPORT which has an empty implementation and cannot be enabled by a config option (although it is listed but disabled with "BROKEN" as a dep). It's unclear whether this could even function today in its current form but it has it's own .c file and Kconfig entry which is a bit more involved to remove and might make a come back? Signed-off-by:
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Also, this helps with the ongoing efforts to enable -Warray-bounds by fixing the following warning: CC [M] fs/cifs/cifssmb.o fs/cifs/cifssmb.c: In function ‘CIFSFindNext’: fs/cifs/cifssmb.c:4636:23: warning: array subscript 1 is above array bounds of ‘char[1]’ [-Warray-bounds] 4636 | pSMB->ResumeFileName[name_len+1] = 0; | ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
-
