- 08 Feb, 2022 4 commits
-
-
Christophe JAILLET authored
A successful ida_simple_get() should be balanced by a corresponding ida_simple_remove(). Add the missing call in the error handling path of the probe. While at it, switch to ida_alloc()/ida_free() instead to ida_simple_get()/ida_simple_remove(). The latter is deprecated and more verbose. Fixes: 4f556bc0 ("misc: cardreader: add new Alcor Micro Cardreader PCI driver") Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/918a9875b7f67b7f8f123c4446452603422e8c5e.1644136776.git.christophe.jaillet@wanadoo.frSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Thibault authored
The buffer was bigger than necessary, and the while loop not very canonical. Also better use i as variable name for an index. Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20220206023845.bpzxtjohekclffra@beginSigned-off-by:
-
Samuel Thibault authored
Users needing it with the dectlk synth report that a 100ms flush delay is still noticeable and prefer to set it to e.g. 10ms. This leaves the default to 4000ms (since hitting it is a sign that the cable is faulty and should be replaced), but allows to set it as short as 10ms. Signed-off-by:
-
Colin Ian King authored
Variable buffer_config is being assigned a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220130232910.9313-1-colin.i.king@gmail.comSigned-off-by:
-
- 04 Feb, 2022 21 commits
-
-
Corentin Labbe authored
On all arch using hpet, only i386 miss writeq/readq. Instead of rewriting them, use linux/io-64-nonatomic-lo-hi.h which already have them. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/20220125140352.4085290-1-clabbe@baylibre.comSigned-off-by:
-
Corentin Labbe authored
This patch fix all style issue for braces and alignment Signed-off-by:
-
Christophe JAILLET authored
A struct device can never be devm_alloc()'ed. Here, it is embedded in "struct fsi_master", and "struct fsi_master" is embedded in "struct fsi_master_aspeed". Since "struct device" is embedded, the data structure embedding it must be released with the release function, as is already done here. So use kzalloc() instead of devm_kzalloc() when allocating "aspeed" and update all error handling branches accordingly. This prevent a potential double free(). This also fix another issue if opb_readl() fails. Instead of a direct return, it now jumps in the error handling path. Fixes: 606397d6 ("fsi: Add ast2600 master driver") Suggested-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Aleksa Vučković authored
This patch fixes the checkpatch.pl error: < WARNING: Missing a blank line after declarations < #97: FILE: drivers/dio/dio.c:97: < + unsigned int i; < + for (i = 0; i < ARRAY_SIZE(names); i++) Signed-off-by:
Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-7-aleksav013@gmail.comSigned-off-by:
-
Aleksa Vučković authored
This patch fixes the checkpatch.pl error: < ERROR: code indent should use tabs where possible < #61: FILE: drivers/dio/dio.c:61: < + int id;$ < < WARNING: please, no spaces at the start of a line < #61: FILE: drivers/dio/dio.c:61: < + int id;$ < < ERROR: code indent should use tabs where possible < #62: FILE: drivers/dio/dio.c:62: < + const char *name;$ < < WARNING: please, no spaces at the start of a line < #62: FILE: drivers/dio/dio.c:62: < + const char *name;$ + 44 more errors of type "code indent should use tabs where possible" + 41 more warnings of type "please, no spaces at the start of a line" Signed-off-by:
-
Aleksa Vučković authored
This patch fixes the checkpatch.pl error: < ERROR: space required after that ',' (ctx:VxV) < #239: FILE: drivers/dio/dio.c:239: < + strcpy(dev->name,dio_getname(dev->id)); Signed-off-by:
-
Aleksa Vučković authored
This patch fixes the checkpatch.pl error: < ERROR: space prohibited after that open parenthesis '(' < #67: FILE: drivers/dio/dio.c:67: < +#define DIOFBNAME(x) { DIO_ENCODE_ID( DIO_ID_FBUFFER, DIO_ID2_##x), DIO_DESC2_##x } Signed-off-by: -
Aleksa Vučković authored
This patch fixes the checkpatch.pl errors and warnings: < ERROR: trailing whitespace < #5: FILE: drivers/dio/dio.c:5: < + * $ < < ERROR: trailing whitespace < #11: FILE: drivers/dio/dio.c:11: < + * This means that framebuffers should pass it as $ < < ERROR: trailing whitespace < #17: FILE: drivers/dio/dio.c:17: < + * Every DIO card has a fixed interrupt priority level. This function $ < < ERROR: trailing whitespace < #20: FILE: drivers/dio/dio.c:20: < + * Return a character string describing this board [might be "" if $ < < ERROR: trailing whitespace < #25: FILE: drivers/dio/dio.c:25: < + * This file is based on the way the Amiga port handles Zorro II cards, $ + 15 more errors and warnings of type "trailing whitespace" Signed-off-by:
-
Aleksa Vučković authored
This patch fixes the checkpatch.pl errors and warnings: < ERROR: open brace '{' following struct go on the same line < +struct dioname < +{ < < ERROR: that open brace { should be on the previous line < +static struct dioname names[] = < +{ < < ERROR: that open brace { should be on the previous line < + for (scode = 0; scode < DIO_SCMAX; ++scode) < + { < < WARNING: braces {} are not necessary for any arm of this statement < + if (scode >= DIOII_SCBASE) { < [...] < + } else if (scode > DIO_SCMAX || scode < 0) < [...] < + else if (DIO_SCINHOLE(scode)) < [...] Signed-off-by: -
Aleksa Vučković authored
This patch fixes the checkpatch.pl warning: < WARNING: Use #include <linux/io.h> instead of <asm/io.h> < #36: FILE: drivers/dio/dio.c:36: < +#include <asm/io.h> /* readb() */ Signed-off-by:
-
David Brazdil authored
Open Profile for DICE is an open protocol for measured boot compatible with the Trusted Computing Group's Device Identifier Composition Engine (DICE) specification. The generated Compound Device Identifier (CDI) certificates represent the hardware/software combination measured by DICE, and can be used for remote attestation and sealing. Add a driver that exposes reserved memory regions populated by firmware with DICE CDIs and exposes them to userspace via a character device. Userspace obtains the memory region's size from read() and calls mmap() to create a mapping of the memory region in its address space. The mapping is not allowed to be write+shared, giving userspace a guarantee that the data were not overwritten by another process. Userspace can also call write(), which triggers a wipe of the DICE data by the driver. Because both the kernel and userspace mappings use write-combine semantics, all clients observe the memory as zeroed after the syscall has returned. Cc: Andrew Scull <ascull@google.com> Cc: Will Deacon <will@kernel.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
David Brazdil <dbrazdil@google.com> Link: https://lore.kernel.org/r/20220126231237.529308-3-dbrazdil@google.comSigned-off-by:
-
David Brazdil authored
Add DeviceTree bindings for Open Profile for DICE, an open protocol for measured boot. Firmware uses DICE to measure the hardware/software combination and generates Compound Device Identifier (CDI) certificates. These are stored in memory and the buffer is described in the DT as a reserved memory region compatible with 'google,open-dice'. 'no-map' is required to ensure the memory region is never treated by the kernel as system memory. Reviewed-by:
-
Yang Li authored
A warning is reported because a colon was dropped, it is found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/mux/core.c:44: warning: Function parameter or member 'state' not described in 'mux_state' Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/a9a970fc-63f9-5ab9-4983-fba5b01bebe2@axentia.seSigned-off-by:
-
Peter Rosin authored
This makes it easier to parse. Signed-off-by:
-
Peter Rosin authored
And implement devm_mux_state_get in terms of the new function. Now we have both mux_state_get and mux_state_put as convenient functions ready to be exported should someone ever need unmanaged interfaces. Tested-by:
Aswath Govindraju <a-govindraju@ti.com> Signed-off-by:
-
Aswath Govindraju authored
In some cases, we might need to provide the state of the mux to be set for the operation of a given peripheral. Therefore, pass this information using mux-states property. Link: https://lore.kernel.org/lkml/20211123081222.27979-1-a-govindraju@ti.comSigned-off-by:
-
Minghao Chi authored
Return value from list_lru_count() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
CGEL ZTE <cgel.zte@gmail.com> Link: https://lore.kernel.org/r/20220104113500.602158-1-chi.minghao@zte.com.cnSigned-off-by:
-
Robert Hancock authored
If the pps-gpio driver was probed prior to the GPIO device it uses, the devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe replaced that error code with -EINVAL, causing the pps-gpio probe to fail and not be retried later. Propagate the error return value so that deferred probe works properly. Fixes: 16152045 (pps: new client driver using GPIO) Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Signed-off-by:
-
Johan Hovold authored
Commit ee2f2074 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load") added a temporary hack which reconfigures the link at HELLO by abusing the deferred request processing mechanism. Restructure the HELLO request processing so that the link-configuration work is queued before creating the debugfs files and add a comment explaining why it's there. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220202113347.1288-4-johan@kernel.orgSigned-off-by:
-
Johan Hovold authored
While currently safe, it is unnecessary (and confusing) to try to destroy the watchdog when watchdog creation fails. Change the corresponding error path to only deregister the svc. Signed-off-by:
-
Dan Carpenter authored
Cleanup if gb_svc_queue_deferred_request() fails. Link: https://lore.kernel.org/r/20220202072016.GA6748@kili Fixes: ee2f2074 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load") Cc: stable@vger.kernel.org # 4.9 [johan: fix commit summary prefix and rename label ] Signed-off-by:
-
- 30 Jan, 2022 15 commits
-
-
Greg Kroah-Hartman authored
We need the char/misc fixes in here as well. Signed-off-by: -
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) * tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support irqchip/gic-v3-its: Reset each ITS's BASERn register before probe irqchip/gic-v3-its: Fix build for !SMP irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap irqchip/realtek-rtl: Service all pending interrupts irqchip/realtek-rtl: Fix off-by-one in routing irqchip/realtek-rtl: Map control data to virq irqchip/apple-aic: Drop unused ipi_hwirq field
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Prevent accesses to the per-CPU cgroup context list from another CPU except the one it belongs to, to avoid list corruption - Make sure parent events are always woken up to avoid indefinite hangs in the traced workload * tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix cgroup event list management perf: Always wake the parent event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Borislav Petkov: "Make sure the membarrier-rseq fence commands are part of the reported set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY" * tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Add another Intel CPU model to the list of CPUs supporting the processor inventory unique number - Allow writing to MCE thresholding sysfs files again - a previous change had accidentally disabled it and no one noticed. Goes to show how much is this stuff used * tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN x86/MCE/AMD: Allow thresholding interface updates after init
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: sysctl, binfmt, ia64, mm (memory-failure, folios, kasan, and psi), selftests, and ocfs2" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: ocfs2: fix a deadlock when commit trans jbd2: export jbd2_journal_[grab|put]_journal_head psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n mm, kasan: use compare-exchange operation to set KASAN page tag kasan: test: fix compatibility with FORTIFY_SOURCE tools/testing/scatterlist: add missing defines mm: page->mapping folio->mapping should have the same offset memory-failure: fetch compound_head after pgmap_pfn_valid() ia64: make IA64_MCA_RECOVERY bool instead of tristate binfmt_misc: fix crash when load/unload module include/linux/sysctl.h: fix register_sysctl_mount_point() return type
-
Joseph Qi authored
commit 6f1b2285 introduces a regression which can deadlock as follows: Task1: Task2: jbd2_journal_commit_transaction ocfs2_test_bg_bit_allocatable spin_lock(&jh->b_state_lock) jbd_lock_bh_journal_head __jbd2_journal_remove_checkpoint spin_lock(&jh->b_state_lock) jbd2_journal_put_journal_head jbd_lock_bh_journal_head Task1 and Task2 lock bh->b_state and jh->b_state_lock in different order, which finally result in a deadlock. So use jbd2_journal_[grab|put]_journal_head instead in ocfs2_test_bg_bit_allocatable() to fix it. Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com Fixes: 6f1b2285 ("ocfs2: fix race between searching chunks and release journal_head from buffer_head") Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by:
Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Tested-by:
Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
Patch series "ocfs2: fix a deadlock case". This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols jbd2_journal_[grab|put]_journal_head as preparation and later use them in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the deadlock. This patch (of 2): This exports symbols jbd2_journal_[grab|put]_journal_head, which will be used outside modules, e.g. ocfs2. Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.comSigned-off-by:
-
Suren Baghdasaryan authored
When CONFIG_PROC_FS is disabled psi code generates the following warnings: kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=] 1364 | static const struct proc_ops psi_cpu_proc_ops = { | ^~~~~~~~~~~~~~~~ kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=] 1355 | static const struct proc_ops psi_memory_proc_ops = { | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=] 1346 | static const struct proc_ops psi_io_proc_ops = { | ^~~~~~~~~~~~~~~ Make definitions of these structures and related functions conditional on CONFIG_PROC_FS config. Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com Fixes: 0e94682b ("psi: introduce psi monitor") Signed-off-by:Suren Baghdasaryan <surenb@google.com> Reported-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Suren Baghdasaryan authored
When CONFIG_CGROUPS is disabled psi code generates the following warnings: kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes] 1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group, | ^~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes] 1182 | void psi_trigger_destroy(struct psi_trigger *t) | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes] 1249 | __poll_t psi_trigger_poll(void **trigger_ptr, | ^~~~~~~~~~~~~~~~ Change the declarations of these functions in the header to provide the prototypes even when they are unused. Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com Fixes: 0e94682b ("psi: introduce psi monitor") Signed-off-by: -
Peter Collingbourne authored
It has been reported that the tag setting operation on newly-allocated pages can cause the page flags to be corrupted when performed concurrently with other flag updates as a result of the use of non-atomic operations. Fix the problem by using a compare-exchange loop to update the tag. Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101 Fixes: 2813b9c0 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by:
Peter Collingbourne <pcc@google.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marco Elver authored
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform dynamic checks using __builtin_object_size(ptr), which when failed will panic the kernel. Because the KASAN test deliberately performs out-of-bounds operations, the kernel panics with FORTIFY_SOURCE, for example: | kernel BUG at lib/string_helpers.c:910! | invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI | CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 | RIP: 0010:fortify_panic+0x19/0x1b | ... | Call Trace: | kmalloc_oob_in_memset.cold+0x16/0x16 | ... Fix it by also hiding `ptr` from the optimizer, which will ensure that __builtin_object_size() does not return a valid size, preventing fortified string functions from panicking. Link: https://lkml.kernel.org/r/20220124160744.1244685-1-elver@google.comSigned-off-by:
Marco Elver <elver@google.com> Reported-by:
Nico Pache <npache@redhat.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by:
-
Maor Gottlieb authored
The cited commits replaced preemptible with pagefault_disabled and flush_kernel_dcache_page with flush_dcache_page respectively, hence need to update the corresponding defines in the test. scatterlist.c: In function ‘sg_miter_stop’: scatterlist.c:919:4: warning: implicit declaration of function ‘flush_dcache_page’ [-Wimplicit-function-declaration] flush_dcache_page(miter->page); ^~~~~~~~~~~~~~~~~ In file included from linux/scatterlist.h:8:0, from scatterlist.c:9: scatterlist.c:922:18: warning: implicit declaration of function ‘pagefault_disabled’ [-Wimplicit-function-declaration] WARN_ON_ONCE(!pagefault_disabled()); ^ linux/mm.h:23:25: note: in definition of macro ‘WARN_ON_ONCE’ int __ret_warn_on = !!(condition); \ ^~~~~~~~~ Link: https://lkml.kernel.org/r/20220118082105.1737320-1-maorg@nvidia.com Fixes: 723aca20 ("mm/scatterlist: replace the !preemptible warning in sg_miter_stop()") Fixes: 0e84f5db ("scatterlist: replace flush_kernel_dcache_page with flush_dcache_page") Signed-off-by:Maor Gottlieb <maorg@nvidia.com> Tested-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Wei Yang authored
As with the other members of folio, the offset of page->mapping and folio->mapping must be the same. The compile-time check was inadvertently removed during development. Add it back. [willy@infradead.org: changelog redo] Link: https://lkml.kernel.org/r/20220104011734.21714-1-richard.weiyang@gmail.comSigned-off-by:
Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
