Lists of DMA channels and slaves are not changed, make them constant. Besides,
SH7724 channel and slave configuration of both DMA controllers is identical,
remove the extra copy of the configuration data.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

As explained in commit 1c0fe6e3, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.

Cc: linux-sh@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

All of the regular CPU init path needs to be __cpuinit annotated for CPU
hotplug.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This does a detect_cpu_and_cache_system() -> cpu_probe() rename, tidies
up the unused return value, and stuffs it under __cpuinit in preparation
for CPU hotplug.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This follows the x86 change and kills off the unthrottle stub. As the x86
change killed off the generic callback it isn't used anymore anyways.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This zeroes out the number of cache aliases in the cache info descriptors
when hardware alias avoidance is enabled. This cuts down on the amount of
flushing taken care of by common code, and also permits coherency control
to be disabled for the single CPU and 4k page size case.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Previously the struct module definition was pulled in from other headers,
but we want the reference to be explicit. Fixes up randconfig build
issues.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This enables support for the hardware synonym avoidance handling on SH-X3
CPUs for the case where dcache aliases are possible. icache handling is
retained, but we flip on broadcasting of the block invalidations due to
the lack of coherency otherwise on SMP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This wires up power-off support for the SDK7786 board.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This implements support for hardware-managed IRQ balancing as implemented
by SH-X3 cores (presently only hooked up for SH7786, but can probably be
carried over to other SH-X3 cores, too).

CPUs need to specify their distribution register along with the mask
definitions, as these follow the same format. Peripheral IRQs that don't
opt out of balancing will be automatically distributed at the whim of the
hardware block, while each CPU needs to verify whether it is handling the
IRQ or not, especially before clearing the mask.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Make sure that the timer IRQs and IPIs aren't enabled for IRQ balancing.
IPIs are disabled as a result of being percpu while the timers simply
disable balancing outright.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds support for hardware-assisted userspace irq masking for
special priority levels. Due to the SR.IMASK interactivity, only some
platforms implement this in hardware (including but not limited to
SH-4A interrupt controllers, and ARM-based SH-Mobile CPUs). Each CPU
needs to wire this up on its own, for now only SH7786 is wired up as an
example.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The printk loglevels are all over the place, make them a bit more
coherent, and add some registration notification while we're at it.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently the sysdevs are simply numbered based on the list position,
without having any direct way of figuring out which controller these are
actually mapping to. This provides a name attr for mapping out the chip
name.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Hook up DMAC0 on SH7786.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently address translation is default-enabled regardless of whether
CONFIG_MMU is set or not in the SH-4 case, this fixes it up, and also
makes the control init word a bit more readable in the process.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sunxvr500: Ignore secondary output PCI devices.
  sparc64: Implement perf_arch_fetch_caller_regs
  sparc64: Update defconfig.
  sparc64: Fix array size reported by vmemmap_populate()
  sparc: Fix regset register window handling.
  drivers/serial/sunsu.c: Correct use after free

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Always build the powerpc perf_arch_fetch_caller_regs version
  perf: Always build the stub perf_arch_fetch_caller_regs version
  perf, probe-finder: Build fix on Debian
  perf/scripts: Tuple was set from long in both branches in python_process_event()
  perf: Fix 'perf sched record' deadlock
  perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernels
  perf, x86: Fix AMD hotplug & constraint initialization
  x86: Move notify_cpu_starting() callback to a later stage
  x86,kgdb: Always initialize the hw breakpoint attribute
  perf: Use hot regs with software sched switch/migrate events
  perf: Correctly align perf event tracing buffer

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: set_cpus_allowed_ptr(): Don't use rq->migration_thread after unlock
  sched: Fix proc_sched_set_task()

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ring-buffer: Add missing unlock
  tracing: Fix lockdep warning in global_clock()

In initial design, walk_page_range() was designed just for walking page
table and it didn't require mmap_sem.  Now, find_vma() etc..  are used
in walk_page_range() and we need mmap_sem around it.

This patch adds mmap_sem around walk_page_range().

Because /proc/<pid>/pagemap's callback routine use put_user(), we have
to get rid of it to do sane fix.

Changelog: 2010/Apr/2
 - fixed start_vaddr and end overflow
Changelog: 2010/Apr/1
 - fixed start_vaddr calculation
 - removed unnecessary cast.
 - removed unnecessary change in smaps.
 - use GFP_TEMPORARY instead of GFP_KERNEL
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: San Mehat <san@google.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[ Fixed kmalloc failure return code as per Matt ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These just represent the secondary and further heads attached to the
card, and they have different sets of PCI bar registers to map.

So don't try to drive them in the main driver.
Reported-by: Frans van Berckel <fberckel@xs4all.nl>
Tested-by: Frans van Berckel <fberckel@xs4all.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>

We provide regs->tstate, regs->tpc, regs->tnpc and
regs->u_regs[UREG_FP].

regs->tstate is necessary for:

	user_mode()		(via perf_exclude_event())

	perf_misc_flags()	(via perf_prepare_sample())

regs->tpc is necessary for:

	perf_instruction_pointer() (via perf_prepare_sample())

and regs->u_regs[UREG_FP] is necessary for:

	perf_callchain()	(via perf_prepare_sample())

The regs->tnpc value is provided just to be tidy.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

vmemmap_populate() attempts to report the used index and total size of
vmemmap_table, but it wrongly shifts the total size so that it is
always shown as 0.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that software events use perf_arch_fetch_caller_regs() too, we
need the powerpc version to be always built.

Fixes the following build error:

	(.text+0x3210): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x3324): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x33bc): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x33ec): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0xd4a0): undefined reference to `perf_arch_fetch_caller_regs'
	arch/powerpc/kernel/built-in.o:(.text+0xd528): more undefined references to `perf_arch_fetch_caller_regs' follow
	make[1]: *** [.tmp_vmlinux1] Error 1
	make: *** [sub-make] Error 2
Reported-by: Michael Ellerman <michael@ellerman.id.au>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

Now that software events use perf_arch_fetch_caller_regs() too, we
need the stub version to be always built in for archs that don't
implement it.

Fixes the following build error in PARISC:

	kernel/built-in.o: In function `perf_event_task_sched_out':
	(.text.perf_event_task_sched_out+0x54): undefined reference to `perf_arch_fetch_caller_regs'
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5965/1: Fix soft lockup in at91 udc driver
  ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds
  ARM: 6005/1: arm: kprobes: fix register corruption with jprobes
  ARM: 6003/1: removing compilation warning from pl061.h
  ARM: 6001/1: removing compilation warning comming from clkdev.h
  ARM: 6000/1: removing compilation warning comming from <asm/irq.h>
  ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h
  ARM: 5997/1: ARM: Correct the VFPv3 detection
  ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
  ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
  ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
  ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
  powerpc/fsl: add device tree binding for QE firmware
  of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree

Merge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing

* 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  reiserfs: Fix locking BUG during mount failure

The missing initialization of the nb_cntl.strap_msi_enable does not
seem to be the only problem that prevents MSI, so that quirk is not
sufficient to enable MSI on all machines.  To be safe, disable MSI
unconditionally for the internal graphics and HDMI audio on these
chipsets.

[rjw: Added the PCI_VENDOR_ID_AI quirk.]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Turn off tracing while in the debugger
  kgdb: use atomic_inc and atomic_dec instead of atomic_set
  kgdb: eliminate kgdb_wait(), all cpus enter the same way
  kgdbts,sh: Add in breakpoint pc offset for superh
  kgdb: have ebin2mem call probe_kernel_write once

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Freezer: Fix buggy resume test for tasks frozen with cgroup freezer
  Freezer: Only show the state of tasks refusing to freeze

release_one_tty(tty) can be called when tty still has a reference
to pgrp/session. In this case we leak the pid.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Building chokes with:

 In file included from /usr/include/gelf.h:53,
                 from /usr/include/elfutils/libdw.h:53,
                 from util/probe-finder.h:61,
                 from util/probe-finder.c:39:
 /usr/include/libelf.h:98: error: expected specifier-qualifier-list before 'off64_t'
 [...]
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <20100329164755.GA16034@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The kernel debugger should turn off kernel tracing any time the
debugger is active and restore it on resume.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>

Memory barriers should be used for the kgdb cpu synchronization.  The
atomic_set() does not imply a memory barrier.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

This is a kgdb architectural change to have all the cpus (master or
slave) enter the same function.

A cpu that hits an exception (wants to be the master cpu) will call
kgdb_handle_exception() from the trap handler and then invoke a
kgdb_roundup_cpu() to synchronize the other cpus and bring them into
the kgdb_handle_exception() as well.

A slave cpu will enter kgdb_handle_exception() from the
kgdb_nmicallback() and set the exception state to note that the
processor is a slave.

Previously the salve cpu would have called kgdb_wait().  This change
allows the debug core to change cpus without resuming the system in
order to inspect arch specific cpu information.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>