- 25 Jun, 2013 2 commits
-
-
Markos Chandras authored
Fixes the following build problem: arch/mips/sni/pcimt.c:188:30: error: 'sni_controller' defined but not used [-Werror=unused-variable] Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Acked-by:
Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5547/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Markos Chandras authored
Fixes the following build problem: mips-linux-gnu-ld:arch/mips/kernel/vmlinux.lds:253: syntax error because VMLINUX_LOAD_ADDRESS was an empty string for that platform so the vmlinux.lds.S created an invalid section entry on line 50. Signed-off-by:
-
- 21 Jun, 2013 26 commits
-
-
Tony Wu authored
As pointed out by Maciej, POOL16C minor opcodes were mostly shifted by one bit. Correct those opcodes, and also add jraddiusp to the enum. Signed-off-by:
Tony Wu <tung7970@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Acked-by:
-
Ralf Baechle authored
MIPS R2 documents state that an execution hazard barrier is needed after a TLBR before reading EntryLo. Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>. Signed-off-by:
-
Ralf Baechle authored
CC arch/mips/kernel/rtlx.o /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’: /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable] /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’: /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors Caused by 496ad9aa [new helper: file_inode(file)]. Signed-off-by:
-
Ralf Baechle authored
Fixes the following linking problem: drivers/watchdog/sb_wdog.c:211: undefined reference to `__udivdi3' This results from reading a 64 bit register, then dividing the value by 1000000. For 32 bit kernels gcc will use the helper function __udivdi3 from libgcc which the kernel intentionally doesn't provide. In the read registerbits 23..63 are always zero and only bits 0..22 are signficant. So a simple cast to truncate the read value to 32 bits fixes the issue. Reported and initial patch by Markos Chandras <markos.chandras@imgtec.com>. Signed-off-by:
-
Florian Fainelli authored
Remove the bogus selects on USB-related symbols for 6345 and 6338, not only we do not yet support USB on BCM63XX, but they also cause the following warnings: warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB && USB_OHCI_HCD) warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB && USB_OHCI_HCD) make[4]: Leaving directory `/home/florian/dev/linux' Just get rid of these bogus Kconfig selects because neither 6345 nor 6338 actually have built-in USB host controllers. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: http://patchwork.linux-mips.org/patch/5497/Signed-off-by:
-
Paul Burton authored
Writing a value to a WatchLo* register creates an execution hazard, so if its value is then read before that hazard is cleared then said value may be invalid. The mips_probe_watch_registers function must therefore clear the execution hazard between setting the match bits in a WatchLo* register & reading the register back in order to check which are set. This fixes intermittent incorrect watchpoint register probing on some MIPS cores such as interAptiv & proAptiv. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
-
Markos Chandras authored
PowerTV does not provide a prom_putchar function needed for early printk so remove this symbol for this platform. Fixes the following problem when EARLY_PRINTK is enabled for powertv: arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar' arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar' Signed-off-by:
-
Markos Chandras authored
SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X or CONFIG_SIBYTE_SB1250 is selected according to the arch/mips/sibyte/Makefile. This fixes the following build problem: arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher' Signed-off-by:
-
Ralf Baechle authored
CC arch/mips/sibyte/bcm1480/bus_watcher.o CHK kernel/config_data.h arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’: arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function) arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1 make[2]: *** [arch/mips/sibyte/bcm1480] Error 2 make[1]: *** [arch/mips/sibyte] Error 2 make: *** [arch/mips] Error 2 The register moved around though it's otherwise the same but because of the changed address it now also has a different name. Signed-off-by:
-
Ralf Baechle authored
CC arch/mips/mm/cerr-sb1.o arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’: arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function) arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1 This happens because 8deab114 [[MIPS] Updated Sibyte headers] changed the headers but not all the users. Signed-off-by:
-
Markos Chandras authored
The write() prototype expects a const char * as argument so declare it as such. Fixes the following build problem: arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of 'cfe_write' discards 'const' qualifier from pointer target type [-Werror] arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of 'cfe_write' makes pointer from integer without a cast [-Werror] Signed-off-by:
-
Markos Chandras authored
It's needed for the TASK_INTERRUPTIBLE definition. Fixes the following build problem: arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) [ralf@linux-mips.org: Ideally sched.h should be included into the actual user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky that close to a release.] Signed-off-by:
-
Markos Chandras authored
Fixes the following build problem: arch/mips/sibyte/sb1250/bus_watcher.c: In function 'sibyte_bw_int': arch/mips/sibyte/sb1250/bus_watcher.c:179:7: error: unused variable 'bw_buf' [-Werror=unused-variable] Signed-off-by:
-
Markos Chandras authored
ap136_pci_init expects a u8 pointer as an argument. Fixes the following build problem on a randconfig: arch/mips/ath79/mach-ap136.c:151:2: error: too many arguments to function 'ap136_pci_init' Signed-off-by:
-
David Daney authored
OCTEON II cannot execute code in the default CAC_BASE space, so we supply a value (0x8000000000000000) that does work. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5457/Signed-off-by:
-
Steven J. Hill authored
Remove the software reset register and reset value definitions from the 'include/asm/mips-boards/generic.h' header file. Also clean up header and whitespace in platform file. Signed-off-by:
-
Steven J. Hill authored
Remove usage of 'include/asm/mips-boards/generic.h' header file. Instead, move the defines for SOFTRES_REG and GORESET local to the platform file. Signed-off-by:
-
Steven J. Hill authored
The soft reset register address and reset value to be written are incorrect for the SEAD-3 platform. This patch fixes them such that the SEAD-3 can actually perform a soft reset instead of causing an exception. Also remove usage of 'include/asm/mips-boards/generic.h' header file. Signed-off-by:
-
Aaro Koskinen authored
Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge device (CS5536 general purpose timer) for the timer interrupt. It starts running early and is already enabled during the PCI configuration, during which there is a small window in pci_read_base() when the register access is temporarily disabled. If the timer interrupts at this point, the system will hang. Fix this by adding a fixup that keeps the register access always enabled. The hang the patch fixes usually looks like this: [ 0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100 [ 0.848000] pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417] [ 0.852000] pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff] [ 0.856000] pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf] [ 28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1] [ 28.140000] Modules linked in: [ 28.140000] irq event stamp: 37965 [ 28.140000] hardirqs last enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c [ 28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c [ 28.140000] softirqs last enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258 [ 28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0 [ 28.140000] Cpu 0 [ 28.140000] $ 0 : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001 [ 28.140000] $ 4 : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011 [ 28.140000] $ 8 : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011 [ 28.140000] $12 : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000 [ 28.140000] $16 : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000 [ 28.140000] $20 : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000 [ 28.140000] $24 : 0000000000000d80 00000000fffedbe0 [ 28.140000] $28 : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8 [ 28.140000] Hi : 0000000000d0fc00 [ 28.140000] Lo : 0000000000f82b40 [ 28.140000] epc : ffffffff8023810c __do_softirq+0xe4/0x258 [ 28.140000] Not tainted [ 28.140000] ra : ffffffff802380f8 __do_softirq+0xd0/0x258 [ 28.140000] Status: 140044e3 KX SX UX KERNEL EXL IE [ 28.140000] Cause : 10008400 [ 28.140000] PrId : 00006303 (ICT Loongson-2) Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4958/Signed-off-by:
-
Markos Chandras authored
FAULT_INJECTION_STACKTRACE_FILTER selects FRAME_POINTER but that symbol is not available for MIPS. Fixes the following problem on a randconfig: warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS) Signed-off-by:
-
David Daney authored
Commit abe77f90 (MIPS: Octeon: Add kexec and kdump support) added a bootmem region for the kernel image itself. The problem is that this is rounded up to a 0x100000 boundary, which is memory that may not be owned by the kernel. Depending on the kernel's configuration based size, this 'extra' memory may contain data passed from the bootloader to the kernel itself, which if clobbered makes the kernel crash in various ways. The fix: Quit rounding the size up, so that we only use memory assigned to the kernel. Signed-off-by:
-
Ralf Baechle authored
Then <asm-generic/topology.h> will define cpp macro as default definition for pcibus_to_node resulting in: CC arch/mips/pci/pci-ip27.o arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’ arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1 Signed-off-by: -
Ralf Baechle authored
LD init/built-in.o arch/mips/built-in.o: In function `xtalk_probe_node': (.cpuinit.text+0x67c): undefined reference to `bridge_probe' arch/mips/built-in.o: In function `xtalk_probe_node': (.cpuinit.text+0x7d8): undefined reference to `bridge_probe' Signed-off-by: -
Ralf Baechle authored
LD init/built-in.o arch/mips/built-in.o: In function `startup_bridge_irq': ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot' ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot' ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge' ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge' arch/mips/built-in.o: In function `shutdown_bridge_irq': ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge' ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge' ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot' ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot' Signed-off-by: -
Ralf Baechle authored
Some of the TLB bit definitions in <asm/pgtable-bits.h> have become rather complex and are no longer usable from assembler resulting in an explosion like this: AS arch/mips/kernel/head.o arch/mips/kernel/head.S: Assembler messages: arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(1<<((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)' make[2]: *** [arch/mips/kernel/head.o] Error 1 Since now MAPPED_KERNEL_SETUP_TLB is in platform-specific code it's safe to hardcode the TLB bits there. Signed-off-by: -
Ralf Baechle authored
It's IP27-specific and can only cause trouble in head.S. Signed-off-by:
-
- 20 Jun, 2013 2 commits
-
-
Ralf Baechle authored
CC drivers/rapidio/switches/idt_gen2.o drivers/rapidio/switches/idt_gen2.c: In function ‘idtg2_show_errlog’: drivers/rapidio/switches/idt_gen2.c:379:30: error: ‘PAGE_SIZE’ undeclared (first use in this function) drivers/rapidio/switches/idt_gen2.c:379:30: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com>
-
Ralf Baechle authored
Signed-off-by:
-
- 18 Jun, 2013 6 commits
-
-
David Daney authored
CC init/do_mounts.o In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0, from include/linux/dma-mapping.h:76, from include/linux/skbuff.h:33, from include/linux/icmpv6.h:4, from include/linux/ipv6.h:59, from include/net/ipv6.h:16, from include/linux/sunrpc/clnt.h:26, from include/linux/nfs_fs.h:30, from init/do_mounts.c:30: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type] LD init/mounts.o CC init/init_task.o In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0, from include/linux/dma-mapping.h:76, from include/linux/skbuff.h:33, from include/linux/netfilter.h:5, from include/net/netns/netfilter.h:5, from include/net/net_namespace.h:20, from include/linux/init_task.h:14, from init/init_task.c:1: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type] LD init/built-in.o CC arch/mips/cavium-octeon/setup.o In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0, from include/linux/dma-mapping.h:76, from include/asm-generic/pci-dma-compat.h:7, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/pci.h:129, from include/linux/pci.h:1451, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/octeon/pci-octeon.h:12, from arch/mips/cavium-octeon/setup.c:41: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: error: no return statement in function returning non-void [-Werror=return-type] cc1: all warnings being treated as errors make[2]: *** [arch/mips/cavium-octeon/setup.o] Error 1 make[1]: *** [arch/mips/cavium-octeon] Error 2 make: *** [arch/mips] Error 2 [ralf@linux-mips.org: while at it, also include <linux/bug.h> directly.] Signed-off-by: -
Ralf Baechle authored
If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION, CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined: arch/mips/cavium-octeon/setup.c: In function ‘prom_init’: arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable] Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by:
-
- 13 Jun, 2013 2 commits
-
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by:
-
- 10 Jun, 2013 2 commits
-
-
Markos Chandras authored
arch_ftrace_update_code and ftrace_modify_all_code are only available if CONFIG_DYNAMIC_FTRACE is selected. Fixes the following build problem on MIPS randconfig: arch/mips/kernel/ftrace.c: In function 'arch_ftrace_update_code': arch/mips/kernel/ftrace.c:31:2: error: implicit declaration of function 'ftrace_modify_all_code' [-Werror=implicit-function-declaration] Signed-off-by:
-
Markos Chandras authored
The kvm_* symbols are only available if KVM is selected. Fixes the following linking problem on a randconfig: arch/mips/built-in.o: In function `local_flush_tlb_mm': (.text+0x18a94): undefined reference to `kvm_local_flush_tlb_all' arch/mips/built-in.o: In function `local_flush_tlb_range': (.text+0x18d0c): undefined reference to `kvm_local_flush_tlb_all' kernel/built-in.o: In function `__schedule': core.c:(.sched.text+0x2a00): undefined reference to `kvm_local_flush_tlb_all' mm/built-in.o: In function `use_mm': (.text+0x30214): undefined reference to `kvm_local_flush_tlb_all' fs/built-in.o: In function `flush_old_exec': (.text+0xf0a0): undefined reference to `kvm_local_flush_tlb_all' make: *** [vmlinux] Error 1 Signed-off-by:
-
