- 10 Oct, 2024 18 commits
-
-
Kuniyuki Iwashima authored
Since introduced, mpls_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Kuniyuki Iwashima authored
Since introduced, mctp has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: 583be982 ("mctp: Add device handling and netlink interface") Fixes: 831119f8 ("mctp: Add neighbour netlink interface") Fixes: 06d2f4c5 ("mctp: Add netlink route management") Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
Kuniyuki Iwashima authored
Since introduced, br_vlan_rtnl_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: 8dcea187 ("net: bridge: vlan: add rtm definitions and dump support") Fixes: f26b2965 ("net: bridge: vlan: add new rtm message support") Fixes: adb3ce9b ("net: bridge: vlan: add del rtm message support") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Kuniyuki Iwashima authored
Since introduced, vxlan_vnifilter_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: f9c4bb0b ("vxlan: vni filtering support on collect metadata device") Signed-off-by:
-
Kuniyuki Iwashima authored
Before commit addf9b90 ("net: rtnetlink: use rcu to free rtnl message handlers"), once rtnl_msg_handlers[protocol] was allocated, the following rtnl_register_module() for the same protocol never failed. However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to be allocated in each rtnl_register_module(), so each call could fail. Many callers of rtnl_register_module() do not handle the returned error, and we need to add many error handlings. To handle that easily, let's add wrapper functions for bulk registration of rtnetlink message handlers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Restrict xtables extensions to families that are safe, syzbot found a way to combine ebtables with extensions that are never used by userspace tools. From Florian Westphal. 2) Set l3mdev inconditionally whenever possible in nft_fib to fix lookup mismatch, also from Florian. netfilter pull request 24-10-09 * tag 'nf-24-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: conntrack_vrf.sh: add fib test case netfilter: fib: check correct rtable in vrf setups netfilter: xtables: avoid NFPROTO_UNSPEC where needed ==================== Link: https://patch.msgid.link/20241009213858.3565808-1-pablo@netfilter.orgSigned-off-by:
-
Eric Dumazet authored
dst_entries_add() uses per-cpu data that might be freed at netns dismantle from ip6_route_net_exit() calling dst_entries_destroy() Before ip6_route_net_exit() can be called, we release all the dsts associated with this netns, via calls to dst_release(), which waits an rcu grace period before calling dst_destroy() dst_entries_add() use in dst_destroy() is racy, because dst_entries_destroy() could have been called already. Decrementing the number of dsts must happen sooner. Notes: 1) in CONFIG_XFRM case, dst_destroy() can call dst_release_immediate(child), this might also cause UAF if the child does not have DST_NOCOUNT set. IPSEC maintainers might take a look and see how to address this. 2) There is also discussion about removing this count of dst, which might happen in future kernels. Fixes: f8864972 ("ipv4: fix dst race in sk_dst_get()") Closes: https://lore.kernel.org/lkml/CANn89iLCCGsP7SFn9HKpvnKu96Td4KD08xf7aGtiYgZnkjaL=w@mail.gmail.com/T/Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20241008143110.1064899-1-edumazet@google.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-10-08 (ice, i40e, igb, e1000e) This series contains updates to ice, i40e, igb, and e1000e drivers. For ice: Marcin allows driver to load, into safe mode, when DDP package is missing or corrupted and adjusts the netif_is_ice() check to account for when the device is in safe mode. He also fixes an out-of-bounds issue when MSI-X are increased for VFs. Wojciech clears FDB entries on reset to match the hardware state. For i40e: Aleksandr adds locking around MACVLAN filters to prevent memory leaks due to concurrency issues. For igb: Mohamed Khalfella adds a check to not attempt to bring up an already running interface on non-fatal PCIe errors. For e1000e: Vitaly changes board type for I219 to more closely match the hardware and stop PHY issues. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: change I219 (19) devices to ADP igb: Do not bring the device up after non-fatal error i40e: Fix macvlan leak by synchronizing access to mac_filter_hash ice: Fix increasing MSI-X on VF ice: Flush FDB entries before reset ice: Fix netif_is_ice() in Safe Mode ice: Fix entering Safe Mode ==================== Link: https://patch.msgid.link/20241008230050.928245-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: misc. fixes involving fallback to TCP - Patch 1: better handle DSS corruptions from a bugged peer: reducing warnings, doing a fallback or a reset depending on the subflow state. For >= v5.7. - Patch 2: fix DSS corruption due to large pmtu xmit, where MPTCP was not taken into account. For >= v5.6. - Patch 3: fallback when MPTCP opts are dropped after the first data packet, instead of resetting the connection. For >= v5.6. - Patch 4: restrict the removal of a subflow to other closing states, a better fix, for a recent one. For >= v5.10. ==================== Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-0-c6fb8e93e551@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
In a previous fix, the in-kernel path-manager has been modified not to retrigger the removal of a subflow if it was already closed, e.g. when the initial subflow is removed, but kept in the subflows list. To be complete, this fix should also skip the subflows that are in any closing state: mptcp_close_ssk() will initiate the closure, but the switch to the TCP_CLOSE state depends on the other peer. Fixes: 58e1b66b ("mptcp: pm: do not remove already closed subflows") Cc: stable@vger.kernel.org Suggested-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
As reported by Christoph [1], before this patch, an MPTCP connection was wrongly reset when a host received a first data packet with MPTCP options after the 3wHS, but got the next ones without. According to the MPTCP v1 specs [2], a fallback should happen in this case, because the host didn't receive a DATA_ACK from the other peer, nor receive data for more than the initial window which implies a DATA_ACK being received by the other peer. The patch here re-uses the same logic as the one used in other places: by looking at allow_infinite_fallback, which is disabled at the creation of an additional subflow. It's not looking at the first DATA_ACK (or implying one received from the other side) as suggested by the RFC, but it is in continuation with what was already done, which is safer, and it fixes the reported issue. The next step, looking at this first DATA_ACK, is tracked in [4]. This patch has been validated using the following Packetdrill script: 0 socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // 3WHS is OK +0.0 < S 0:0(0) win 65535 <mss 1460, sackOK, nop, nop, nop, wscale 6, mpcapable v1 flags[flag_h] nokey> +0.0 > S. 0:0(0) ack 1 <mss 1460, nop, nop, sackOK, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey]> +0.1 < . 1:1(0) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[ckey=2, skey]> +0 accept(3, ..., ...) = 4 // Data from the client with valid MPTCP options (no DATA_ACK: normal) +0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop> // From here, the MPTCP options will be dropped by a middlebox +0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs> +0.1 read(4, ..., 500) = 500 +0 write(4, ..., 100) = 100 // The server replies with data, still thinking MPTCP is being used +0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop> // But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options +0.1 < . 501:501(0) ack 101 win 2048 +0.0 < P. 501:601(100) ack 101 win 2048 // The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window +0.0 > . 101:101(0) ack 601 Note that this script requires Packetdrill with MPTCP support, see [3]. Fixes: dea2b1ea ("mptcp: do not reset MP_CAPABLE subflow on mapping errors") Cc: stable@vger.kernel.org Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/518 [1] Link: https://datatracker.ietf.org/doc/html/rfc8684#name-fallback [2] Link: https://github.com/multipath-tcp/packetdrill [3] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/519 [4] Reviewed-by:
-
Paolo Abeni authored
Syzkaller was able to trigger a DSS corruption: TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Modules linked in: CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff RSP: 0018:ffffc90000006db8 EFLAGS: 00010246 RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00 RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0 RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8 R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000 R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5 FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> move_skbs_to_msk net/mptcp/protocol.c:811 [inline] mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854 subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490 tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283 tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5662 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6107 __napi_poll+0xcb/0x490 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6962 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451 dev_queue_xmit include/linux/netdevice.h:3094 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline] tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752 __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015 tcp_push_pending_frames include/net/tcp.h:2107 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline] tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x214/0x350 net/core/sock.c:3072 release_sock+0x61/0x1f0 net/core/sock.c:3626 mptcp_push_release net/mptcp/protocol.c:1486 [inline] __mptcp_push_pending+0x6b5/0x9f0 net/mptcp/protocol.c:1625 mptcp_sendmsg+0x10bb/0x1b10 net/mptcp/protocol.c:1903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2603 ___sys_sendmsg net/socket.c:2657 [inline] __sys_sendmsg+0x2aa/0x390 net/socket.c:2686 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb06e9317f9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe2cfd4f98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fb06e97f468 RCX: 00007fb06e9317f9 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000005 RBP: 00007fb06e97f446 R08: 0000555500000000 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fb06e97f406 R13: 0000000000000001 R14: 00007ffe2cfd4fe0 R15: 0000000000000003 </TASK> Additionally syzkaller provided a nice reproducer. The repro enables pmtu on the loopback device, leading to tcp_mtu_probe() generating very large probe packets. tcp_can_coalesce_send_queue_head() currently does not check for mptcp-level invariants, and allowed the creation of cross-DSS probes, leading to the mentioned corruption. Address the issue teaching tcp_can_coalesce_send_queue_head() about mptcp using the tcp_skb_can_collapse(), also reducing the code duplication. Fixes: 85712484 ("tcp: coalesce/collapse must respect MPTCP extensions") Cc: stable@vger.kernel.org Reported-by: syzbot+d1bff73460e33101f0e7@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/513Signed-off-by:
-
Paolo Abeni authored
Bugged peer implementation can send corrupted DSS options, consistently hitting a few warning in the data path. Use DEBUG_NET assertions, to avoid the splat on some builds and handle consistently the error, dumping related MIBs and performing fallback and/or reset according to the subflow type. Fixes: 6771bfd9 ("mptcp: update mptcp ack sequence from work queue") Cc: stable@vger.kernel.org Signed-off-by:
-
Breno Leitao authored
A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. Fixes: 1ec9daf9 ("net: netconsole: append userdata to fragmented netconsole messages") Signed-off-by:Breno Leitao <leitao@debian.org> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241008094325.896208-1-leitao@debian.orgSigned-off-by:
-
Vladimir Oltean authored
In case of a tc mirred action from one switch to another, the behavior is not correct. We simply tell the source switch driver to program a mirroring entry towards mirror->to_local_port = to_dp->index, but it is not even guaranteed that the to_dp belongs to the same switch as dp. For proper cross-chip support, we would need to go through the cross-chip notifier layer in switch.c, program the entry on cascade ports, and introduce new, explicit API for cross-chip mirroring, given that intermediary switches should have introspection into the DSA tags passed through the cascade port (and not just program a port mirror on the entire cascade port). None of that exists today. Reject what is not implemented so that user space is not misled into thinking it works. Fixes: f50f2127 ("net: dsa: Add plumbing for port mirroring") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241008094320.3340980-1-vladimir.oltean@nxp.comSigned-off-by:
-
Wei Fang authored
Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on these platforms fec_ptp_init() is not called and the related members in fep are not initialized. However, fec_ptp_save_state() is called unconditionally, which causes the kernel to panic. Therefore, add a condition so that fec_ptp_save_state() is not called if PTP is not supported. Fixes: a1477dc8 ("net: fec: Restart PPS after link state change") Reported-by:
Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/lkml/353e41fe-6bb4-4ee9-9980-2da2a9c1c508@roeck-us.net/Signed-off-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by:
-
Rosen Penev authored
It's done in probe so it should be undone here. Fixes: 1d3bb996 ("Device tree aware EMAC driver") Signed-off-by:
Rosen Penev <rosenp@gmail.com> Reviewed-by:
-
Jacky Chou authored
Add error handling from calling fixed_phy_register. It may return some error, therefore, need to check the status. And fixed_phy_register needs to bind a device node for mdio. Add the mac device node for fixed_phy_register function. This is a reference to this function, of_phy_register_fixed_link(). Fixes: e24a6c87 ("net: ftgmac100: Get link speed and duplex for NC-SI") Signed-off-by:
Jacky Chou <jacky_chou@aspeedtech.com> Link: https://patch.msgid.link/20241007032435.787892-1-jacky_chou@aspeedtech.comSigned-off-by:
-
- 09 Oct, 2024 9 commits
-
-
Florian Westphal authored
meta iifname veth0 ip daddr ... fib daddr oif ... is expected to return "dummy0" interface which is part of same vrf as veth0. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
We need to init l3mdev unconditionally, else main routing table is searched and incorrect result is returned unless strict (iif keyword) matching is requested. Next patch adds a selftest for this. Fixes: 2a8a7c0e ("netfilter: nft_fib: Fix for rpath check with VRF devices") Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761Signed-off-by:
-
Florian Westphal authored
syzbot managed to call xt_cluster match via ebtables: WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780 [..] ebt_do_table+0x174b/0x2a40 Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet processing. As this is only useful to restrict locally terminating TCP/UDP traffic, register this for ipv4 and ipv6 family only. Pablo points out that this is a general issue, direct users of the set/getsockopt interface can call into targets/matches that were only intended for use with ip(6)tables. Check all UNSPEC matches and targets for similar issues: - matches and targets are fine except if they assume skb_network_header() is valid -- this is only true when called from inet layer: ip(6) stack pulls the ip/ipv6 header into linear data area. - targets that return XT_CONTINUE or other xtables verdicts must be restricted too, they are incompatbile with the ebtables traverser, e.g. EBT_CONTINUE is a completely different value than XT_CONTINUE. Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as they are provided for use by ip(6)tables. The MARK target is also used by arptables, so register for NFPROTO_ARP too. While at it, bail out if connbytes fails to enable the corresponding conntrack family. This change passes the selftests in iptables.git. Reported-by: syzbot+256c348558aa5cf611a9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netfilter-devel/66fec2e2.050a0220.9ec68.0047.GAE@google.com/ Fixes: 0269ea49 ("netfilter: xtables: add cluster match") Signed-off-by:
-
Jijie Shao authored
Yisen Zhuang has left the company in September. Jian Shen will be responsible for maintaining the hns3/hns driver's code in the future, so add Jian Shen to the hns3/hns driver's matainer list. Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
If hashing fails in sctp_listen_start(), the socket remains in the LISTENING state, even though it was not added to the hash table. This can lead to a scenario where a socket appears to be listening without actually being accessible. This patch ensures that if the hashing operation fails, the sk_state is set back to CLOSED before returning an error. Note that there is no need to undo the autobind operation if hashing fails, as the bind port can still be used for next listen() call on the same socket. Fixes: 76c6d988 ("sctp: add sock_reuseport for the sock in __sctp_hash_endpoint") Reported-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Daniel Palmer authored
Currently this driver prints this line with what looks like a rogue format specifier when the device is probed: [ 2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx Change the printk() for netdev_info() and move it after the registration has completed so it prints out the name of the interface properly. Signed-off-by:
Daniel Palmer <daniel@0x0f.com> Reviewed-by:
-
Heiner Kallweit authored
All MMD reads return 0 for the RTL8126A-integrated PHY. Therefore phylib assumes it doesn't support EEE, what results in higher power consumption, and a significantly higher chip temperature in my case. To fix this split out the PHY driver for the RTL8126A-integrated PHY and set the read_mmd/write_mmd callbacks to read from vendor-specific registers. Fixes: 5befa372 ("net: phy: realtek: add support for RTL8126A-integrated 5Gbps PHY") Cc: stable@vger.kernel.org Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
MD Danish Anwar authored
The VLAN table is a shared memory between the two ports/slices in a ICSSG cluster and this may lead to race condition when the common code paths for both ports are executed in different CPUs. Fix the race condition access by locking the shared memory access Fixes: 487f7323 ("net: ti: icssg-prueth: Add helper functions to configure FDB") Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
-
Rosen Penev authored
dcr_map is called in the previous if and therefore needs to be unmapped. Fixes: 1ff0fcfc ("ibm_newemac: Fix new MAL feature handling") Signed-off-by:
-
- 08 Oct, 2024 13 commits
-
-
Eric Dumazet authored
Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] <TASK> [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.810950] tbf_reset (./include/linux/timekeeping.h:169 net/sched/sch_tbf.c:334) sch_tbf [ 88.811208] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.811484] netif_set_real_num_tx_queues (./include/linux/spinlock.h:396 ./include/net/sch_generic.h:768 net/core/dev.c:2958) [ 88.811870] __tun_detach (drivers/net/tun.c:590 drivers/net/tun.c:673) [ 88.812271] tun_chr_close (drivers/net/tun.c:702 drivers/net/tun.c:3517) [ 88.812505] __fput (fs/file_table.c:432 (discriminator 1)) [ 88.812735] task_work_run (kernel/task_work.c:230) [ 88.813016] do_exit (kernel/exit.c:940) [ 88.813372] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 88.813639] ? handle_mm_fault (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/memcontrol.h:1022 ./include/linux/memcontrol.h:1045 ./include/linux/memcontrol.h:1052 mm/memory.c:5928 mm/memory.c:6088) [ 88.813867] do_group_exit (kernel/exit.c:1070) [ 88.814138] __x64_sys_exit_group (kernel/exit.c:1099) [ 88.814490] x64_sys_call (??:?) [ 88.814791] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 88.815012] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 88.815495] RIP: 0033:0x7f44560f1975 Fixes: 175f9c1b ("net_sched: Add size table for qdiscs") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Vitaly Lifshits authored
Sporadic issues, such as PHY access loss, have been observed on I219 (19) devices. It was found that these devices have hardware more closely related to ADP than MTP and the issues were caused by taking MTP-specific flows. Change the MAC and board types of these devices from MTP to ADP to correctly reflect the LAN hardware, and flows, of these devices. Fixes: db2d737d ("e1000e: Separate MTP board type from ADP") Signed-off-by:
Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by:
Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Mohamed Khalfella authored
Commit 004d2506 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. Signed-off-by:
Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by:
Yuanyuan Zhong <yzhong@purestorage.com> Fixes: 004d2506 ("igb: Fix igb_down hung on surprise removal") Reviewed-by:
-
Aleksandr Loktionov authored
This patch addresses a macvlan leak issue in the i40e driver caused by concurrent access to vsi->mac_filter_hash. The leak occurs when multiple threads attempt to modify the mac_filter_hash simultaneously, leading to inconsistent state and potential memory leaks. To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock), ensuring atomic operations and preventing concurrent access. Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in i40e_add_mac_filter() to help catch similar issues in the future. Reproduction steps: 1. Spawn VFs and configure port vlan on them. 2. Trigger concurrent macvlan operations (e.g., adding and deleting portvlan and/or mac filters). 3. Observe the potential memory leak and inconsistent state in the mac_filter_hash. This synchronization ensures the integrity of the mac_filter_hash and prevents the described leak. Fixes: fed0d9f1 ("i40e: Fix VF's MAC Address change on VM") Reviewed-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
-
Marcin Szycik authored
Increasing MSI-X value on a VF leads to invalid memory operations. This is caused by not reallocating some arrays. Reproducer: modprobe ice echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count Default MSI-X is 16, so 17 and above triggers this issue. KASAN reports: BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] Read of size 8 at addr ffff8888b937d180 by task bash/28433 (...) Call Trace: (...) ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] kasan_report+0xed/0x120 ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_cfg_def+0x3360/0x4770 [ice] ? mutex_unlock+0x83/0xd0 ? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice] ? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vf_reconfig_vsi+0x114/0x210 [ice] ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice] sriov_vf_msix_count_store+0x21c/0x300 (...) Allocated by task 28201: (...) ice_vsi_cfg_def+0x1c8e/0x4770 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vsi_setup+0x179/0xa30 [ice] ice_sriov_configure+0xcaa/0x1520 [ice] sriov_numvfs_store+0x212/0x390 (...) To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This causes the required arrays to be reallocated taking the new queue count into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq before ice_vsi_rebuild(), so that realloc uses the newly set queue count. Additionally, ice_vsi_rebuild() does not remove VSI filters (ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer necessary. Reported-by:
Jacob Keller <jacob.e.keller@intel.com> Fixes: 2a2cb4c6 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()") Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
-
Wojciech Drewek authored
Triggering the reset while in switchdev mode causes errors[1]. Rules are already removed by this time because switch content is flushed in case of the reset. This means that rules were deleted from HW but SW still thinks they exist so when we get SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to delete not existing rule. We can avoid these errors by clearing the rules early in the reset flow before they are removed from HW. Switchdev API will get notified that the rule was removed so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification. Remove unnecessary ice_clear_sw_switch_recipes. [1] ice 0000:01:00.0: Failed to delete FDB forward rule, err: -2 ice 0000:01:00.0: Failed to delete FDB guard rule, err: -2 Fixes: 7c945a1a ("ice: Switchdev FDB events support") Reviewed-by:
Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Tested-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
-
Marcin Szycik authored
netif_is_ice() works by checking the pointer to netdev ops. However, it only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops, so in Safe Mode it always returns false, which is unintuitive. While it doesn't look like netif_is_ice() is currently being called anywhere in Safe Mode, this could change and potentially lead to unexpected behaviour. Fixes: df006dd4 ("ice: Add initial support framework for LAG") Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Tested-by:
-
Marcin Szycik authored
If DDP package is missing or corrupted, the driver should enter Safe Mode. Instead, an error is returned and probe fails. To fix this, don't exit init if ice_init_ddp_config() returns an error. Repro: * Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg) * Load ice Fixes: cc5776fe ("ice: Enable switching default Tx scheduler topology") Reviewed-by:
-
Greg Thelen authored
Starting with 6.12 commit 85585b4b ("selftests: add ncdevmem, netcat for devmem TCP") kselftest-all creates additional outputs that kselftest-clean does not cleanup: $ make defconfig $ make kselftest-all $ make kselftest-clean $ git clean -ndxf | grep tools/net Would remove tools/net/ynl/lib/__pycache__/ Would remove tools/net/ynl/lib/ynl.a Would remove tools/net/ynl/lib/ynl.d Would remove tools/net/ynl/lib/ynl.o Make kselftest-clean remove the newly added net/ynl outputs. Fixes: 85585b4b ("selftests: add ncdevmem, netcat for devmem TCP") Signed-off-by:
Greg Thelen <gthelen@google.com> Reviewed-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by:
-
Jakub Kicinski authored
Javier Carrasco says: ==================== selftests: net: add missing gitignore and EXTRA_CLEAN entries. This series is a cherry-pick on top of v6.12-rc1 from the one I sent for selftests with other patches that were not net-related: https://lore.kernel.org/all/20240925-selftests-gitignore-v3-0-9db896474170@gmail.com/ The patches have not been modified, and the Reviewed-by tags have been kept. v1: https://lore.kernel.org/20240930-net-selftests-gitignore-v1-0-65225a855946@gmail.com ==================== Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-0-3a0b2876394a@gmail.comSigned-off-by:
-
Javier Carrasco authored
The generated include.sh should be ignored by git. Create a new gitignore and add the file to the list. Reviewed-by:
Allison Henderson <allison.henderson@oracle.com> Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-3-3a0b2876394a@gmail.comSigned-off-by:
-
Javier Carrasco authored
The include.sh file is generated when building the net/rds selftests, but there is no rule to delete it with the clean target. Add the file to EXTRA_CLEAN in order to remove it when required. Reviewed-by:
-
Javier Carrasco authored
This executable is missing from the corresponding gitignore file. Add msg_oob to the net gitignore list. Signed-off-by:
-
