1. 11 Aug, 2017 2 commits
    • Philipp Zabel's avatar
      drm/imx: ipuv3-plane: fix YUV framebuffer scanout on the base plane · 5be5dd38
      Philipp Zabel authored
      Historically, only RGB framebuffers could be assigned to the primary
      plane. This changed with universal plane support. Since no colorspace
      conversion was set up for the IPUv3 full plane, assigning YUV frame
      buffers to the primary plane caused incorrect output.
      Fix this by enabling color space conversion also for the primary plane.
      Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
      5be5dd38
    • Arnd Bergmann's avatar
      gpu: ipu-v3: add DRM dependency · 2406b296
      Arnd Bergmann authored
      The new PRE/PRG driver code causes a link failure when IPUv3 is built-in,
      but DRM is built as a module:
      
      drivers/gpu/ipu-v3/ipu-pre.o: In function `ipu_pre_configure':
      ipu-pre.c:(.text.ipu_pre_configure+0x18): undefined reference to `drm_format_info'
      drivers/gpu/ipu-v3/ipu-prg.o: In function `ipu_prg_format_supported':
      ipu-prg.c:(.text.ipu_prg_format_supported+0x8): undefined reference to `drm_format_info'
      
      Adding a Kconfig dependency on DRM means we don't run into this problem
      any more. If DRM is disabled altogether, the IPUv3 driver is built
      without PRE/PRG support.
      
      Fixes: ea9c2605 ("gpu: ipu-v3: add driver for Prefetch Resolve Gasket")
      Link: https://patchwork.kernel.org/patch/9636665/Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      [p.zabel@pengutronix.de: changed the dependency from DRM to DRM || !DRM,
       since the link failure only happens when DRM=m and IPUV3_CORE=y.
       Modified the commit message to reflect this.]
      Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
      2406b296
  2. 10 Aug, 2017 8 commits
  3. 08 Aug, 2017 2 commits
  4. 07 Aug, 2017 7 commits
  5. 06 Aug, 2017 14 commits
  6. 05 Aug, 2017 7 commits
    • Andreas Dilger's avatar
      ext4: fix dir_nlink behaviour · c7414892
      Andreas Dilger authored
      The dir_nlink feature has been enabled by default for new ext4
      filesystems since e2fsprogs-1.41 in 2008, and was automatically
      enabled by the kernel for older ext4 filesystems since the
      dir_nlink feature was added with ext4 in kernel 2.6.28+ when
      the subdirectory count exceeded EXT4_LINK_MAX-1.
      
      Automatically adding the file system features such as dir_nlink is
      generally frowned upon, since it could cause the file system to not be
      mountable on older kernel, thus preventing the administrator from
      rolling back to an older kernel if necessary.
      
      In this case, the administrator might also want to disable the feature
      because glibc's fts_read() function does not correctly optimize
      directory traversal for directories that use st_nlinks field of 1 to
      indicate that the number of links in the directory are not tracked by
      the file system, and could fail to traverse the full directory
      hierarchy.  Fortunately, in the past ten years very few users have
      complained about incomplete file system traversal by glibc's
      fts_read().
      
      This commit also changes ext4_inc_count() to allow i_nlinks to reach
      the full EXT4_LINK_MAX links on the parent directory (including "."
      and "..") before changing i_links_count to be 1.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196405Signed-off-by: default avatarAndreas Dilger <adilger@dilger.ca>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      c7414892
    • Dan Carpenter's avatar
      ext4: silence array overflow warning · 381cebfe
      Dan Carpenter authored
      I get a static checker warning:
      
          fs/ext4/ext4.h:3091 ext4_set_de_type()
          error: buffer overflow 'ext4_type_by_mode' 15 <= 15
      
      It seems unlikely that we would hit this read overflow in real life, but
      it's also simple enough to make the array 16 bytes instead of 15.
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      381cebfe
    • Jan Kara's avatar
      ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize · fcf5ea10
      Jan Kara authored
      ext4_find_unwritten_pgoff() does not properly handle a situation when
      starting index is in the middle of a page and blocksize < pagesize. The
      following command shows the bug on filesystem with 1k blocksize:
      
        xfs_io -f -c "falloc 0 4k" \
                  -c "pwrite 1k 1k" \
                  -c "pwrite 3k 1k" \
                  -c "seek -a -r 0" foo
      
      In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048,
      SEEK_DATA) will return the correct result.
      
      Fix the problem by neglecting buffers in a page before starting offset.
      Reported-by: default avatarAndreas Gruenbacher <agruenba@redhat.com>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      CC: stable@vger.kernel.org # 3.8+
      fcf5ea10
    • Mario Limonciello's avatar
      platform/x86: intel-vbtn: match power button on press rather than release · 946da699
      Mario Limonciello authored
      This fixes a problem where the system gets stuck in a loop
      unable to wakeup via power button in s2idle.
      
      The problem happens because:
       - press power button:
         - system emits 0xc0 (power press), event ignored
         - system emits 0xc1 (power release), event processed,
           emited as KEY_POWER
         - set wakeup_mode to true
         - system goes to s2idle
       - press power button
         - system emits 0xc0 (power press), wakeup_mode is true,
           system wakes
         - system emits 0xc1 (power release), event processed,
           emited as KEY_POWER
         - system goes to s2idle again
      
      To avoid this situation, process the presses (which matches what
      intel-hid does too).
      
      Verified on an Dell XPS 9365
      Signed-off-by: default avatarMario Limonciello <mario.limonciello@dell.com>
      Acked-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      Signed-off-by: default avatarDarren Hart (VMware) <dvhart@infradead.org>
      946da699
    • Linus Torvalds's avatar
      Merge tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · 0fdd951c
      Linus Torvalds authored
      Pull media fixes from Mauro Carvalho Chehab:
       "This series is larger than I would like to submit for -rc4. My
        original intent were to sent it to either -rc2 or -rc3. Unfortunately,
        due to my vacations, I got a lot of pending stuff after my return, and
        had to do some biz trips, with prevented me to send this earlier.
      
        Several fixes:
      
         - some fixes at atomisp staging driver
      
         - several gcc 7 warning fixes
      
         - cleanup media SVG files, in order to fix PDF build on some distros
      
         - fix random Kconfig build of venus driver
      
         - some fixes for the venus driver
      
         - some changes from semaphone to mutex in ngene's driver
      
         - some locking fixes at dib0700 driver
      
         - several fixes on ngene's driver and frontends to make it properly
           support some new boards added on Kernel 4.13
      
         - some fixes to CEC drivers
      
         - omap_vout: vrfb: convert to dmaengine
      
         - docs-rst: document EBUSY for VIDIOC_S_FMT
      
        Please notice that the big diffstat changes here are at the SVG files.
      
        Visually, the images look the same, but the file size is now a lot
        smaller than before, and they don't use some XML tags that would cause
        them to be badly parsed by some ImageMagick versions, or to require a
        lot of memory by TeTex, with would break PDF output on some
        distributions"
      
      * tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (68 commits)
        media: atomisp2: array underflow in imx_enum_frame_size()
        media: atomisp2: array underflow in ap1302_enum_frame_size()
        media: atomisp2: Array underflow in atomisp_enum_input()
        media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS
        media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
        media: venus: don't abuse dma_alloc for non-DMA allocations
        media: venus: hfi: fix error handling in hfi_sys_init_done()
        media: venus: fix compile-test build on non-qcom ARM platform
        media: venus: mark PM functions as __maybe_unused
        media: cec-notifier: small improvements
        media: pulse8-cec: persistent_config should be off by default
        media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES
        media: staging: atomisp: array underflow in ioctl
        media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
        media: svg: avoid too long lines
        media: svg files: simplify files
        media: selection.svg: simplify the SVG file
        media: vimc: set id_table for platform drivers
        media: staging: atomisp: disable warnings with cc-disable-warning
        media: davinci: variable 'common' set but not used
        ...
      0fdd951c
    • Daeho Jeong's avatar
      ext4: release discard bio after sending discard commands · e4510577
      Daeho Jeong authored
      We've changed the discard command handling into parallel manner.
      But, in this change, I forgot decreasing the usage count of the bio
      which was used to send discard request. I'm sorry about that.
      
      Fixes: a0154344 ("ext4: send parallel discards on commit completions")
      Signed-off-by: default avatarDaeho Jeong <daeho.jeong@samsung.com>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Reviewed-by: default avatarJan Kara <jack@suse.cz>
      e4510577
    • Linus Torvalds's avatar
      Merge tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · aab7761c
      Linus Torvalds authored
      Pull GPIO fixes from Linus Walleij:
      
       - LP87565: set the proper output level for direction_output.
      
       - stm32: fix the kernel build by selecting the hierarchical irqdomain
         symbol properly - this happens to be done in the pin control
         framework but whatever, it had dependencies to GPIO so we need to
         apply it here.
      
       - Select the hierarchical IRQ domain also for Xgene.
      
       - Fix wakeups to work on MXC.
      
       - Fix up the device tree binding on Exar that went astray, also add the
         right bindings.
      
       - Fix the unwanted events for edges from the library.
      
       - Fix the unbalanced chanined IRQ on the Tegra.
      
      * tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio: tegra: fix unbalanced chained_irq_enter/exit
        gpiolib: skip unwanted events, don't convert them to opposite edge
        gpio: exar: Use correct property prefix and document bindings
        gpio: gpio-mxc: Fix: higher 16 GPIOs usable as wake source
        gpio: xgene-sb: select IRQ_DOMAIN_HIERARCHY
        pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on
        gpio: lp87565: Set proper output level and direction for direction_output
        MAINTAINERS: Add entry for Whiskey Cove PMIC GPIO driver
      aab7761c