- 29 Aug, 2021 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2021-08-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v5.15-rc1: - Disable underrun recovery with eDP MSO panels on ADL-P - Use designated initializers for init/exit table - Fix some error pointer usages Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r1egd1cg.fsf@intel.com
-
- 26 Aug, 2021 4 commits
-
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Two fixups - Fix missing unlock issue in exynos_drm_g2d.c - Fix a build warning in exynos_drm_dma.c One cleanup - Replace atomic_t with refcount_t in exynos_drm_g2d.c Signed-off-by:
-
ssh://git.freedesktop.org/git/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.15-rc1 The bulk of these changes is a more modern ABI that can be efficiently used on newer SoCs as well as older ones. The userspace parts for this are available here: - libdrm support: https://gitlab.freedesktop.org/tagr/drm/-/commits/drm-tegra-uabi-v8 - VAAPI driver: https://github.com/cyndis/vaapi-tegra-driver In addition, existing userspace from the grate reverse-engineering project has been updated to use this new ABI: - X11 driver: https://github.com/grate-driver/xf86-video-opentegra - 3D driver: https://github.com/grate-driver/grate Other than that, there's also support for display memory bandwidth management for various generations and a bit of cleanup. Signed-off-by:
-
Dave Airlie authored
Merge commit '81fd23e2' of https://git.pengutronix.de/git/lst/linux into drm-next things are still slow in etnaviv land. Just one hardware support addition for the GPU found on the NXP Layerscape LS1028A SoC from Michael and the GEM mmap cleanup from Thomas. Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.15-2021-08-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-08-20: amdgpu: - embed hw fence into job - Misc SMU fixes - PSP TA code cleanup - RAS fixes - PWM fan speed fixes - DC workqueue cleanups - SR-IOV fixes - gfxoff delayed work fix - Pin domain check fix amdkfd: - SVM fixes radeon: - Code cleanup Signed-off-by:
-
- 24 Aug, 2021 4 commits
-
-
Nathan Chancellor authored
Clang warns: In file included from drivers/gpu/drm/i915/gt/intel_reset.c:1514: drivers/gpu/drm/i915/gt/selftest_hangcheck.c:465:62: warning: variable 'err' is uninitialized when used here [-Wuninitialized] pr_err("[%s] Create context failed: %d!\n", engine->name, err); ^~~ ... drivers/gpu/drm/i915/gt/selftest_hangcheck.c:580:62: warning: variable 'err' is uninitialized when used here [-Wuninitialized] pr_err("[%s] Create context failed: %d!\n", engine->name, err); ^~~ ... 2 warnings generated. This appears to be a copy and paste issue. Use ce directly using the %pe specifier to pretty print the error code so that err is not used uninitialized in these functions. Fixes: 3a7b7266 ("drm/i915/selftest: Bump selftest timeouts for hangcheck") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Dan Carpenter authored
If the intel_engine_create_pinned_context() function returns an error pointer, then dereferencing "ce" will Oops. Use "vm" instead of "ce->vm". Fixes: cf586021 ("drm/i915/gt: Pipelined page migration") Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210813113600.GC30697@kili (cherry picked from commit ff12ce2c) Signed-off-by:
-
Matt Roper authored
One of the cases that the bspec lists for when underrun recovery must be disabled is "COG;" that note actually refers to eDP multi-segmented operation (MSO). Let's ensure the this additional restriction is honored by the driver. Bspec: 50351 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: ba3b049f ("drm/i915/adl_p: Allow underrun recovery when possible") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210816204112.2960624-1-matthew.d.roper@intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit c00e14cd) Signed-off-by:
-
Kees Cook authored
The kernel builds with -Werror=designated-init, and __designated_init is used by CONFIG_GCC_PLUGIN_RANDSTRUCT for automatically selected (all function pointer) structures. Include the field names in the init/exit table. Avoids warnings like: drivers/gpu/drm/i915/i915_module.c:59:4: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Fixes: a04ea6ae ("drm/i915: Use a table for i915_init/exit (v2)") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210817233357.2379455-1-keescook@chromium.org (cherry picked from commit 90fd2194) Signed-off-by:
-
- 21 Aug, 2021 3 commits
-
-
Nathan Chancellor authored
In certain randconfigs, clang warns: drivers/gpu/drm/exynos/exynos_drm_dma.c:121:19: warning: variable 'mapping' is uninitialized when used here [-Wuninitialized] priv->mapping = mapping; ^~~~~~~ drivers/gpu/drm/exynos/exynos_drm_dma.c:111:16: note: initialize the variable 'mapping' to silence this warning void *mapping; ^ = NULL 1 warning generated. This occurs when CONFIG_EXYNOS_IOMMU is enabled and both CONFIG_ARM_DMA_USE_IOMMU and CONFIG_IOMMU_DMA are disabled, which makes the code look like void *mapping; if (0) mapping = arm_iommu_create_mapping() else if (0) mapping = iommu_get_domain_for_dev() ... priv->mapping = mapping; Add an else branch that initializes mapping to the -ENODEV error pointer so that there is no more warning and the driver does not change during runtime. Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Xiyu Yang authored
refcount_t type and corresponding API can protect refcounters from accidental underflow and overflow and further use-after-free situations. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
Wei Yongjun authored
Add the missing unlock before return from function g2d_runqueue_worker() in the error handling case. Fixes: 445d3bed ("drm/exynos: use pm_runtime_resume_and_get()") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
- 20 Aug, 2021 3 commits
-
-
Michel Dänzer authored
schedule_delayed_work does not push back the work if it was already scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms after the first time GFXOFF was disabled and re-enabled, even if GFXOFF was disabled and re-enabled again during those 100 ms. This resulted in frame drops / stutter with the upcoming mutter 41 release on Navi 14, due to constantly enabling GFXOFF in the HW and disabling it again (for getting the GPU clock counter). To fix this, call cancel_delayed_work_sync when the disable count transitions from 0 to 1, and only schedule the delayed work on the reverse transition, not if the disable count was already 0. This makes sure the delayed work doesn't run at unexpected times, and allows it to be lock-free. v2: * Use cancel_delayed_work_sync & mutex_trylock instead of mod_delayed_work. v3: * Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König) v4: * Fix race condition between amdgpu_gfx_off_ctrl incrementing adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off checking for it to be 0 (Evan Quan) Cc: stable@vger.kernel.org Reviewed-by:
Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3 Acked-by: Christian König <christian.koenig@amd.com> # v3 Signed-off-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
For some reason we run into an use case where a BO is already pinned into GTT, but should be pinned into VRAM|GTT again. Handle that case gracefully as well. Reviewed-by:
Shashank Sharma <Shashank.sharma@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Evan Quan authored
Considering Arcturus is a dedicated ASIC for computing, it will be more proper to drop the support for fan speed reading and setting. That's on the TODO list. Signed-off-by:
Rui Teng <rui.teng@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
- 18 Aug, 2021 9 commits
-
-
Lukas Bulwahn authored
Commit 04ed8459 ("drm/amdgpu: remove chash") removes the chash architecture and its corresponding config CHASH. There is still a reference to CHASH in the config DRM_AMDGPU in ./drivers/gpu/drm/Kconfig. Remove this obsolete reference to config CHASH. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
YuBiao Wang authored
[Why] In some cases when we unload driver, warning call trace will show up in vram_mgr_fini which claims that LRU is not empty, caused by the ttm bo inside delay deleted queue. [How] We should flush delayed work to make sure the delay deleting is done. Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Candice Li authored
Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Hawking Zhang authored
aldebaran supports up to 16 xgmi physical nodes. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Evan Quan authored
We have a S3 issue on that SKU with BACO enabled. Will bring back this when that root caused. Signed-off-by:
-
Zhan Liu authored
[why] dcn301_calculate_wm_and_dl() causes flickering when external monitor is connected. This issue has been fixed before by commit 0e4c0ae5 ("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however part of the fix was gone after commit 2cbcb78c ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next"). [how] Use dcn30_calculate_wm_and_dlg() instead as in the original fix. Fixes: 2cbcb78c ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next") Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Zhan Liu <zhan.liu@amd.com> Tested-by:
Oliver Logush <oliver.logush@amd.com> Signed-off-by:
-
Zhigang Luo authored
MMSCH 1.0 doesn't have major/minor version, only verison. Signed-off-by:
Zhigang Luo <zhigang.luo@amd.com> Reviewed by Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by:
-
Jonathan Kim authored
The TA has a limit to the amount of data that can be retrieved from GET_TOPOLOGY. For setups that exceed this limit, the xGMI topology needs to be re-initialized and data needs to be re-fetched from the extended link records by setting a flag in the shared command buffer. The number of hops and the number of links must be accumulated by the driver. Other data points are all fetched from the first request. Because the TA has already exceeded its link record limit, it cannot hold bidirectional information. Otherwise the driver would have to do more than two fetches so the driver has to reflect the topology information in the opposite direction. v2: squashed with internal reviewed fix Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
-
- 17 Aug, 2021 2 commits
-
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
This is the main pull for v5.15, after the early pull request with drm/scheduler conversion: * New a6xx GPU support: a680 and 7c3 * dsi: 7nm phi, sc7280 support, test pattern generator support * mdp4 fixes for older hw like the nexus7 * displayport fixes Signed-off-by:
-
Dave Airlie authored
Merge tag 'mediatek-drm-next-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.15 1. MT8133 AAL support, adjust rdma fifo threshold formula. 2. Implement mmap as GEM object function. 3. Add support for MT8167. 4. Test component initialization earlier in the function mtk_drm_crtc_create. 5. CMDQ refinement. Signed-off-by:
-
- 16 Aug, 2021 14 commits
-
-
Yongqiang Niu authored
In cmdq mode, packet may be flushed before it is executed, so the pending flag should be cleared after cmdq packet is done. Signed-off-by:
Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org>
-
Chun-Kuang Hu authored
One mtk_crtc need just one cmdq_handle, so add one cmdq_handle in mtk_crtc to prevent frequently allocation and free of cmdq_handle. Signed-off-by: -
Chun-Kuang Hu authored
CMDQ is used to update display register in vblank period, so it should be execute in next vblank. If it fail to execute in next 2 vblank, tiemout happen. Signed-off-by: -
Chun-Kuang Hu authored
In mailbox rx_callback, it pass struct mbox_client to callback function, but it could not map back to mtk_drm_crtc instance because struct cmdq_client use a pointer to struct mbox_client: struct cmdq_client { struct mbox_client client; struct mbox_chan *chan; }; struct mtk_drm_crtc { /* client instance data */ struct cmdq_client *cmdq_client; }; so remove struct cmdq_client and let mtk_drm_crtc instance define mbox_client as: struct mtk_drm_crtc { /* client instance data */ struct mbox_client cl; }; and in rx_callback function, use struct mbox_client to get struct mtk_drm_crtc. Signed-off-by: -
Chun-Kuang Hu authored
rx_callback is a standard mailbox callback mechanism and could cover the function of proprietary cmdq_task_cb, so use the standard one instead of the proprietary one. Signed-off-by: -
Nathan Chancellor authored
Clang + -Wimplicit-fallthrough warns: drivers/gpu/drm/radeon/radeon_fb.c:170:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ drivers/gpu/drm/radeon/radeon_fb.c:170:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang's version of this warning is a little bit more pedantic than GCC's. Add the missing break to satisfy it to match what has been done all over the kernel tree. Reviewed-by: -
Aric Cyr authored
This version brings along following fixes: - Ensure DCN save init registers after VM setup - Fix multi-display support for idle opt workqueue - Use vblank control events for PSR enable/disable - Create default dc_sink when fail reading EDID under MST Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] Compilation of the workqueue fails if not building with the DCN config option set. [How] Guard calls to the flush with the DCN config option to fix the build. Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Jake Wang authored
[Why] DM initializes VM context after DMCUB initialization. This results in loss of DCN_VM_CONTEXT registers after z10. [How] Notify DMCUB when VM setup is complete, and have DMCUB save init registers. v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix Reviewed-by:
Jake Wang <haonan.wang2@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] PSR can disable the HUBP along with the OTG when PSR is active. We'll hit a pageflip timeout when the OTG is disable because we're no longer updating the CRTC vblank counter and the pflip high IRQ will not fire on the flip. In order to flip the page flip timeout occur we should modify the enter/exit conditions to match DRM requirements. [How] Use our deferred handlers for DRM vblank control to notify DMCU(B) when it can enable or disable PSR based on whether vblank is disabled or enabled respectively. We'll need to pass along the stream with the notification now because we want to access the CRTC state while the CRTC is locked to get the stream state prior to the commit. Retain a reference to the stream so it remains safe to continue to access and release that reference once we're done with it. Enable/disable logic follows what we were previously doing in update_planes. The workqueue has to be flushed before programming streams or planes to ensure that we exit out of idle optimizations and PSR before these events occur if necessary. To keep the skip count logic the same to avoid FBCON PSR enablement requires copying the allow condition onto the DM IRQ parameters - a field that we can actually access from the worker. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] The current implementation for idle optimization support only has a single work item that gets reshuffled into the system workqueue whenever we receive an enable or disable event. We can have mismatched events if the work hasn't been processed or if we're getting control events from multiple displays at once. This fixes this issue and also makes the implementation usable for PSR control - which will be addressed in another patch. [How] We need to be able to flush remaining work out on demand for driver stop and psr disable so create a driver specific workqueue instead of using the system one. The workqueue will be single threaded to guarantee the ordering of enable/disable events. Refactor the queue to allocate the control work and deallocate it after processing it. Pass the acrtc directly to make it easier to handle psr enable/disable in a later patch. Rename things to indicate that it's not just MALL specific. Reviewed-by:
-
Wayne Lin authored
[Why] While reading remote EDID via Startech 1-to-4 hub, occasionally we won't get response in time and won't light up corresponding monitor. Ideally, we can still add generic modes for userspace to choose to try to light up the monitor and which is done in drm_helper_probe_single_connector_modes(). So the main problem here is that we fail .mode_valid since we don't create remote dc_sink for this case. [How] Also add default dc_sink if we can't get the EDID. Reviewed-by:
-
Evan Quan authored
These registers have different address from other SMU V11 ASICs. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
