- 04 Nov, 2018 40 commits
-
-
James Chapman authored
[ Upstream commit 900631ee ] If L2TP_ATTR_OFFSET is set to a non-zero value in L2TPv3 tunnels, it results in L2TPv3 packets being transmitted which might not be compliant with the L2TPv3 RFC. This patch has l2tp ignore the offset setting and send all packets with no offset. In more detail: L2TPv2 supports a variable offset from the L2TPv2 header to the payload. The offset value is indicated by an optional field in the L2TP header. Our L2TP implementation already detects the presence of the optional offset and skips that many bytes when handling data received packets. All transmitted packets are always transmitted with no offset. L2TPv3 has no optional offset field in the L2TPv3 packet header. Instead, L2TPv3 defines optional fields in a "Layer-2 Specific Sublayer". At the time when the original L2TP code was written, there was talk at IETF of offset being implemented in a new Layer-2 Specific Sublayer. A L2TP_ATTR_OFFSET netlink attribute was added so that this offset could be configured and the intention was to allow it to be also used to set the tx offset for L2TPv2. However, no L2TPv3 offset was ever specified and the L2TP_ATTR_OFFSET parameter was forgotten about. Setting L2TP_ATTR_OFFSET results in L2TPv3 packets being transmitted with the specified number of bytes padding between L2TPv3 header and payload. This is not compliant with L2TPv3 RFC3931. This change removes the configurable offset altogether while retaining L2TP_ATTR_OFFSET for backwards compatibility. Any L2TP_ATTR_OFFSET value is ignored. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marcel Ziswiler authored
[ Upstream commit 4c9a27a6 ] Since commit f8f8f1d0 ("clk: Don't touch hardware when reparenting during registration") ULPI has been broken on Tegra20 leading to the following error message during boot: [ 1.974698] ulpi_phy_power_on: ulpi write failed [ 1.979384] tegra-ehci c5004000.usb: Failed to power on the phy [ 1.985434] tegra-ehci: probe of c5004000.usb failed with error -110 Debugging through the changes and finally also consulting the TRM revealed that rather than the CDEV2 clock off OSC requiring such pin muxing actually the PLL_P_OUT4 clock is in use. It looks like so far it just worked by chance of that one having been enabled which Stephen's commit now changed when reparenting sclk away from pll_p_out4 leaving that one disabled. Fix this by properly assigning the PLL_P_OUT4 clock as the ULPI PHY clock. Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Noa Osherovich authored
[ Upstream commit e7b169f3 ] During QP creation, the mlx5 driver translates the QP type to an internal value which is passed on to FW. There was no check to make sure that the translated value is valid, and -EINVAL was coerced into the mailbox command. Current firmware refuses this as an invalid QP type, but future/past firmware may do something else. Fixes: 09a7d9ec ('{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc') Reviewed-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Stefan Agner authored
[ Upstream commit 0f0e8de3 ] In order to make sure compiler flag detection for ARM works correctly the no-integrated-as flags need to be set before including the arch specific Makefile. Fixes: cfe17c9b ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 3a9910d7 ] qla2x00_tmf_sp_done() now deletes the timer that will run qla2x00_tmf_iocb_timeout(), but doesn't check whether the timer already expired. Check the return value from del_timer() to avoid calling complete() a second time. Fixes: 4440e46d ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous ...") Fixes: 1514839b ("scsi: qla2xxx: Fix NULL pointer crash due to active ...") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Shay Agroskin authored
[ Upstream commit e279d634 ] Removed an error message received when configuring ETS total bandwidth to be zero. Our hardware doesn't support such configuration, so we shall reject it in the driver. Nevertheless, we removed the error message in order to eliminate error messages caused by old userspace tools who try to pass such configuration. Fixes: ff089191 ("net/mlx5e: Fix ETS BW check") Signed-off-by:
Shay Agroskin <shayag@mellanox.com> Reviewed-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Kevin Hao authored
[ Upstream commit 5df7af85 ] For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a6 ("gianfar: Disable EEE autoneg by default") Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Kevin Hao authored
[ Upstream commit 0231b1a0 ] The Ethernet on mpc8315erdb is broken since commit b6b5e8a6 ("gianfar: Disable EEE autoneg by default"). The reason is that even though the rtl8211b doesn't support the MMD extended registers access, it does return some random values if we trying to access the MMD register via indirect method. This makes it seem that the EEE is supported by this phy device. And the subsequent writing to the MMD registers does cause the phy malfunction. So use the dummy stubs for the MMD register access to fix this issue. Fixes: b6b5e8a6 ("gianfar: Disable EEE autoneg by default") Signed-off-by:
-
Milan Broz authored
[ Upstream commit e16b4f99 ] Since crypto API commit 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") dm-integrity cannot use keyed algorithms without the key being set. The dm-integrity recognizes this too late (during use of HMAC), so it allows creation and formatting of superblock, but the device is in fact unusable. Fix it by detecting the key requirement in integrity table constructor. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Corentin Labbe authored
[ Upstream commit c1e150ce ] When CONFIG_NUMA is not set, the build fails with: arch/powerpc/platforms/pseries/hotplug-cpu.c:335:4: error: déclaration implicite de la fonction « update_numa_cpu_lookup_table » So we have to add update_numa_cpu_lookup_table() as an empty function when CONFIG_NUMA is not set. Fixes: 1d9a0907 ("powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Israel Rukshin authored
[ Upstream commit 6082d9c9 ] Adding the vector offset when calling to mlx5_vector2eqn() is wrong. This is because mlx5_vector2eqn() checks if EQ index is equal to vector number and the fact that the internal completion vectors that mlx5 allocates don't get an EQ index. The second problem here is that using effective_affinity_mask gives the same CPU for different vectors. This leads to unmapped queues when calling it from blk_mq_rdma_map_queues(). This doesn't happen when using affinity_hint mask. Fixes: 2572cf57 ("mlx5: fix mlx5_get_vector_affinity to start from completion vector 0") Fixes: 05e0cc84 ("net/mlx5: Fix get vector affinity helper function") Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 686c97ee ] Make sure to check both return code fields before(!) processing the command response. Otherwise we risk operating on invalid data. This matches an earlier fix for SETASSPARMS commands, see commit ad3cbf61 ("s390/qeth: fix error handling in checksum cmd callback"). Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Doug Ledford authored
[ Upstream commit 6b9f8970 ] If the allocation of elem fails, it is not sufficient to simply check for NULL and return. We need to also put our reference on the pool or else we will leave the pool with a permanent ref count and we will never be able to free it. Fixes: 4831ca9e ("IB/rxe: check for allocation failure on elem") Suggested-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Alex Vesker authored
[ Upstream commit 1f80bd6a ] The locking order of vlan_rwsem (LOCK A) and then rtnl (LOCK B), contradicts other flows such as ipoib_open possibly causing a deadlock. To prevent this deadlock heavy flush is called with RTNL locked and only then tries to acquire vlan_rwsem. This deadlock is possible only when there are child interfaces. [ 140.941758] ====================================================== [ 140.946276] WARNING: possible circular locking dependency detected [ 140.950950] 4.15.0-rc1+ #9 Tainted: G O [ 140.954797] ------------------------------------------------------ [ 140.959424] kworker/u32:1/146 is trying to acquire lock: [ 140.963450] (rtnl_mutex){+.+.}, at: [<ffffffffc083516a>] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 140.970006] but task is already holding lock: [ 140.975141] (&priv->vlan_rwsem){++++}, at: [<ffffffffc0834ee1>] __ipoib_ib_dev_flush+0x51/0x4e0 [ib_ipoib] [ 140.982105] which lock already depends on the new lock. [ 140.990023] the existing dependency chain (in reverse order) is: [ 140.998650] -> #1 (&priv->vlan_rwsem){++++}: [ 141.005276] down_read+0x4d/0xb0 [ 141.009560] ipoib_open+0xad/0x120 [ib_ipoib] [ 141.014400] __dev_open+0xcb/0x140 [ 141.017919] __dev_change_flags+0x1a4/0x1e0 [ 141.022133] dev_change_flags+0x23/0x60 [ 141.025695] devinet_ioctl+0x704/0x7d0 [ 141.029156] sock_do_ioctl+0x20/0x50 [ 141.032526] sock_ioctl+0x221/0x300 [ 141.036079] do_vfs_ioctl+0xa6/0x6d0 [ 141.039656] SyS_ioctl+0x74/0x80 [ 141.042811] entry_SYSCALL_64_fastpath+0x1f/0x96 [ 141.046891] -> #0 (rtnl_mutex){+.+.}: [ 141.051701] lock_acquire+0xd4/0x220 [ 141.055212] __mutex_lock+0x88/0x970 [ 141.058631] __ipoib_ib_dev_flush+0x2da/0x4e0 [ib_ipoib] [ 141.063160] __ipoib_ib_dev_flush+0x71/0x4e0 [ib_ipoib] [ 141.067648] process_one_work+0x1f5/0x610 [ 141.071429] worker_thread+0x4a/0x3f0 [ 141.074890] kthread+0x141/0x180 [ 141.078085] ret_from_fork+0x24/0x30 [ 141.081559] other info that might help us debug this: [ 141.088967] Possible unsafe locking scenario: [ 141.094280] CPU0 CPU1 [ 141.097953] ---- ---- [ 141.101640] lock(&priv->vlan_rwsem); [ 141.104771] lock(rtnl_mutex); [ 141.109207] lock(&priv->vlan_rwsem); [ 141.114032] lock(rtnl_mutex); [ 141.116800] *** DEADLOCK *** Fixes: b4b678b0 ("IB/ipoib: Grab rtnl lock on heavy flush when calling ndo_open/stop") Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit d1853975 ] As reported by Meelis Roos, my previous patch causes an incorrect calculation of the timeout, through an undefined signed integer overflow: [ 12.228155] UBSAN: Undefined behaviour in drivers/scsi/aacraid/commsup.c:2514:49 [ 12.228229] signed integer overflow: [ 12.228283] 964297611 * 250 cannot be represented in type 'long int' The problem is that doing a multiplication with HZ first and then dividing by USEC_PER_SEC worked correctly for 32-bit microseconds, but not for 32-bit nanoseconds, which would require up to 41 bits. This reworks the calculation to first convert the nanoseconds into jiffies, which should give us the same result as before and not overflow. Unfortunately I did not understand the exact intention of the algorithm, in particular the part where we add half a second, so it's possible that there is still a preexisting problem in this function. I added a comment that this would be handled more nicely using usleep_range(), which generally works better for waking up at a particular time than the current schedule_timeout() based implementation. I did not feel comfortable trying to implement that without being sure what the intent is here though. Fixes: 820f1886 ("scsi: aacraid: use timespec64 instead of timeval") Tested-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Shuah Khan authored
[ Upstream commit 5468099c ] Commit 2f2d0088 ("usbip: prevent vhci_hcd driver from leaking a socket pointer address") in the /sys/devices/platform/vhci_hcd/status. Fix the header and field alignment to reflect the changes and make it easier to read. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Williams authored
[ Upstream commit fb2a1748 ] Validate command parsing in acpi_nfit_ctl for the clear error command. This tests for a crash condition introduced by commit 4b27db7e "acpi, nfit: add support for the _LSI, _LSR, and _LSW label methods". Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit 5cd2d8fc ] The ucode_major and ucode_minor were swapped. This has no practical consequences since those fields are not used. Same goes for umac_major and umac_minor which were only printed under certain debug flags. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Liad Kaufman authored
[ Upstream commit dfd4b08c ] Even if no ALIVE was received, the WRT data can still be collected. Add this. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
-
Sara Sharon authored
[ Upstream commit 4c59ff5a ] This bit will be used in CCK to indicate short preamble. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Larry Chen authored
[ Upstream commit 69eb7765 ] ocfs2_duplicate_clusters_by_page() may crash if one of the extent's pages is dirty. When a page has not been written back, it is still in dirty state. If ocfs2_duplicate_clusters_by_page() is called against the dirty page, the crash happens. To fix this bug, we can just unlock the page and wait until the page until its not dirty. The following is the backtrace: kernel BUG at /root/code/ocfs2/refcounttree.c:2961! [exception RIP: ocfs2_duplicate_clusters_by_page+822] __ocfs2_move_extent+0x80/0x450 [ocfs2] ? __ocfs2_claim_clusters+0x130/0x250 [ocfs2] ocfs2_defrag_extent+0x5b8/0x5e0 [ocfs2] __ocfs2_move_extents_range+0x2a4/0x470 [ocfs2] ocfs2_move_extents+0x180/0x3b0 [ocfs2] ? ocfs2_wait_for_recovery+0x13/0x70 [ocfs2] ocfs2_ioctl_move_extents+0x133/0x2d0 [ocfs2] ocfs2_ioctl+0x253/0x640 [ocfs2] do_vfs_ioctl+0x90/0x5f0 SyS_ioctl+0x74/0x80 do_syscall_64+0x74/0x140 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Once we find the page is dirty, we do not wait until it's clean, rather we use write_one_page() to write it back Link: http://lkml.kernel.org/r/20180829074740.9438-1-lchen@suse.com [lchen@suse.com: update comments] Link: http://lkml.kernel.org/r/20180830075041.14879-1-lchen@suse.com [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Larry Chen <lchen@suse.com> Acked-by:
Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 0781168e ] In yam_ioctl(), the concrete ioctl command is firstly copied from the user-space buffer 'ifr->ifr_data' to 'ioctl_cmd' and checked through the following switch statement. If the command is not as expected, an error code EINVAL is returned. In the following execution the buffer 'ifr->ifr_data' is copied again in the cases of the switch statement to specific data structures according to what kind of ioctl command is requested. However, after the second copy, no re-check is enforced on the newly-copied command. Given that the buffer 'ifr->ifr_data' is in the user space, a malicious user can race to change the command between the two copies. This way, the attacker can inject inconsistent data and cause undefined behavior. This patch adds a re-check in each case of the switch statement if there is a second copy in that case, to re-check whether the command obtained in the second copy is the same as the one in the first copy. If not, an error code EINVAL will be returned. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 2c05d888 ] In cxgb_extension_ioctl(), the command of the ioctl is firstly copied from the user-space buffer 'useraddr' to 'cmd' and checked through the switch statement. If the command is not as expected, an error code EOPNOTSUPP is returned. In the following execution, i.e., the cases of the switch statement, the whole buffer of 'useraddr' is copied again to a specific data structure, according to what kind of command is requested. However, after the second copy, there is no re-check on the newly-copied command. Given that the buffer 'useraddr' is in the user space, a malicious user can race to change the command between the two copies. By doing so, the attacker can supply malicious data to the kernel and cause undefined behavior. This patch adds a re-check in each case of the switch statement if there is a second copy in that case, to re-check whether the command obtained in the second copy is the same as the one in the first copy. If not, an error code EINVAL is returned. Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 2d52527e ] the be2net implementation of .ndo_tunnel_{add,del}() changes the value of NETIF_F_GSO_UDP_TUNNEL bit in 'features' and 'hw_features', but it forgets to call netdev_features_change(). Moreover, ethtool setting for that bit can potentially be reverted after a tunnel is added or removed. GSO already does software segmentation when 'hw_enc_features' is 0, even if VXLAN offload is turned on. In addition, commit 096de2f8 ("benet: stricter vxlan offloading check in be_features_check") avoids hardware segmentation of non-VXLAN tunneled packets, or VXLAN packets having wrong destination port. So, it's safe to avoid flipping the above feature on addition/deletion of VXLAN tunnels. Fixes: 630f4b70 ("be2net: Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit e4a02ed2 ] If CONFIG_WW_MUTEX_SELFTEST=y is enabled, booting an image in an arm64 virtual machine results in the following traceback if 8 CPUs are enabled: DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current) WARNING: CPU: 2 PID: 537 at kernel/locking/mutex.c:1033 __mutex_unlock_slowpath+0x1a8/0x2e0 ... Call trace: __mutex_unlock_slowpath() ww_mutex_unlock() test_cycle_work() process_one_work() worker_thread() kthread() ret_from_fork() If requesting b_mutex fails with -EDEADLK, the error variable is reassigned to the return value from calling ww_mutex_lock on a_mutex again. If this call fails, a_mutex is not locked. It is, however, unconditionally unlocked subsequently, causing the reported warning. Fix the problem by using two error variables. With this change, the selftest still fails as follows: cyclic deadlock not resolved, ret[7/8] = -35 However, the traceback is gone. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Fixes: d1b42b80 ("locking/ww_mutex: Add kselftests for resolving ww_mutex cyclic deadlocks") Link: http://lkml.kernel.org/r/1538516929-9734-1-git-send-email-linux@roeck-us.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit a07f388e ] RMNET RX handler was processing invalid packets that were originally sent on the real device and were looped back via dev_loopback_xmit(). This was detected using syzkaller. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Maciej W. Rozycki authored
[ Upstream commit fe3a83af ] Fix a commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") regression with the `declance' driver, which caused the adapter identification message to be split between two lines, e.g.: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA , addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Address that properly, by printing identification with a single call, making the messages now look like: declance.c: v0.011 by Linux MIPS DECstation task force tc6: PMAD-AA, addr = 08:00:2b:1b:2a:6a, irq = 14 tc6: registered as eth0. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by:
-
Rickard x Andersson authored
[ Upstream commit 657ade07 ] During certain heavy network loads TX could time out with TX ring dump. TX is sometimes never restarted after reaching "tx_stop_threshold" because function "fec_enet_tx_queue" only tests the first queue. In addition the TX timeout callback function failed to recover because it also operated only on the first queue. Signed-off-by:
Rickard x Andersson <rickaran@axis.com> Signed-off-by:
-
Natarajan, Janakarajan authored
[ Upstream commit d7cbbe49 ] In Family 17h, some L3 Cache Performance events require the ThreadMask and SliceMask to be set. For other events, these fields do not affect the count either way. Set ThreadMask and SliceMask to 0xFF and 0xF respectively. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H . Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Suravee <Suravee.Suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/Message-ID: Signed-off-by:
-
Kan Liang authored
[ Upstream commit 9d92cfea ] The counters on M3UPI Link 0 and Link 3 don't count properly, and writing 0 to these counters may causes system crash on some machines. The PCI BDF addresses of the M3UPI in the current code are incorrect. The correct addresses should be: D18:F1 0x204D D18:F2 0x204E D18:F5 0x204D Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit cd6fb677 ] Some of the scheduling tracepoints allow the perf_tp_event code to write to ring buffer under different cpu than the code is running on. This results in corrupted ring buffer data demonstrated in following perf commands: # perf record -e 'sched:sched_switch,sched:sched_wakeup' perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.383 [sec] [ perf record: Woken up 8 times to write data ] 0x42b890 [0]: failed to process type: -1765585640 [ perf record: Captured and wrote 4.825 MB perf.data (29669 samples) ] # perf report --stdio 0x42b890 [0]: failed to process type: -1765585640 The reason for the corruption are some of the scheduling tracepoints, that have __perf_task dfined and thus allow to store data to another cpu ring buffer: sched_waking sched_wakeup sched_wakeup_new sched_stat_wait sched_stat_sleep sched_stat_iowait sched_stat_blocked The perf_tp_event function first store samples for current cpu related events defined for tracepoint: hlist_for_each_entry_rcu(event, head, hlist_entry) perf_swevent_event(event, count, &data, regs); And then iterates events of the 'task' and store the sample for any task's event that passes tracepoint checks: ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]); list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { if (event->attr.type != PERF_TYPE_TRACEPOINT) continue; if (event->attr.config != entry->type) continue; perf_swevent_event(event, count, &data, regs); } Above code can race with same code running on another cpu, ending up with 2 cpus trying to store under the same ring buffer, which is specifically not allowed. This patch prevents the problem, by allowing only events with the same current cpu to receive the event. NOTE: this requires the use of (per-task-)per-cpu buffers for this feature to work; perf-record does this. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> [peterz: small edits to Changelog] Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit a9f97721 ] When we unregister a PMU, we fail to serialize the @pmu_idr properly. Fix that by doing the entire thing under pmu_lock. Signed-off-by:
-
Yu Zhao authored
[ Upstream commit 1db58529 ] reg_process_hint_country_ie() can free regulatory_request and return REG_REQ_ALREADY_SET. We shouldn't use regulatory_request after it's called. KASAN error was observed when this happens. BUG: KASAN: use-after-free in reg_process_hint+0x839/0x8aa [cfg80211] Read of size 4 at addr ffff8800c430d434 by task kworker/1:3/89 <snipped> Workqueue: events reg_todo [cfg80211] Call Trace: dump_stack+0xc1/0x10c ? _atomic_dec_and_lock+0x1ad/0x1ad ? _raw_spin_lock_irqsave+0xa0/0xd2 print_address_description+0x86/0x26f ? reg_process_hint+0x839/0x8aa [cfg80211] kasan_report+0x241/0x29b reg_process_hint+0x839/0x8aa [cfg80211] reg_todo+0x204/0x5b9 [cfg80211] process_one_work+0x55f/0x8d0 ? worker_detach_from_pool+0x1b5/0x1b5 ? _raw_spin_unlock_irq+0x65/0xdd ? _raw_spin_unlock_irqrestore+0xf3/0xf3 worker_thread+0x5dd/0x841 ? kthread_parkme+0x1d/0x1d kthread+0x270/0x285 ? pr_cont_work+0xe3/0xe3 ? rcu_read_unlock_sched_notrace+0xca/0xca ret_from_fork+0x22/0x40 Allocated by task 2718: set_track+0x63/0xfa __kmalloc+0x119/0x1ac regulatory_hint_country_ie+0x38/0x329 [cfg80211] __cfg80211_connect_result+0x854/0xadd [cfg80211] cfg80211_rx_assoc_resp+0x3bc/0x4f0 [cfg80211] smsc95xx v1.0.6 ieee80211_sta_rx_queued_mgmt+0x1803/0x7ed5 [mac80211] ieee80211_iface_work+0x411/0x696 [mac80211] process_one_work+0x55f/0x8d0 worker_thread+0x5dd/0x841 kthread+0x270/0x285 ret_from_fork+0x22/0x40 Freed by task 89: set_track+0x63/0xfa kasan_slab_free+0x6a/0x87 kfree+0xdc/0x470 reg_process_hint+0x31e/0x8aa [cfg80211] reg_todo+0x204/0x5b9 [cfg80211] process_one_work+0x55f/0x8d0 worker_thread+0x5dd/0x841 kthread+0x270/0x285 ret_from_fork+0x22/0x40 <snipped> Signed-off-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit c530c471 ] The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: e0e474a8 ("smsc95xx: add wol magic packet support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 9c734b27 ] The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 6c636503 ("smsc75xx: add wol magic packet support") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit f2750df1 ] The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 21ff2e89 ("r8152: support WOL") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit c5cb93e9 ] The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 19a38d8e ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit eb9ad088 ] The driver supports a fair amount of Wake-on-LAN modes, but is not checking that the user specified one that is supported. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Woojung Huh <Woojung.Huh@Microchip.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 5ba6b4aa ] The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit c4ce446e ] The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 2e55cc72 ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Signed-off-by:
-
