- 10 May, 2018 5 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A little bigger than normal since this is two weeks of fixes. - Atom firmware table updates for vega12 - Fix fallout from huge page support - Fix up smu7 power profile interface to be consistent with vega - Misc other fixes * 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: Refine the output of pp_power_profile_mode on VI drm/amdgpu: Switch to interruptable wait to recover from ring hang. drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages drm/amd/display: Use kvzalloc for potentially large allocations drm/amd/display: Don't return ddc result and read_bytes in same return value drm/amd/display: Add get_firmware_info_v3_2 for VG12 drm/amd: Add BIOS smu_info v3_3 required struct def. drm/amd/display: Add VG12 ASIC IDs
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
atomic: Clear state pointers on clear (Ville) vc4: Fix oops in dpi disable (Eric) omap: Various error-checking + uninitialized var fixes (Tomi) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> * tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc: drm/vc4: Fix scaling of uni-planar formats drm/bridge/sii8620: add Kconfig dependency on extcon drm/omap: handle alloc failures in omap_connector drm/omap: add missing linefeeds to prints drm/omap: handle error if scale coefs are not found drm/omap: check return value from soc_device_match drm/omap: fix possible NULL ref issue in tiler_reserve_2d drm/omap: fix uninitialized ret variable drm/omap: silence unititialized variable warning drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge. drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear() drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Increase LVDS panel timeout to 5s to avoid spurious *ERROR* - Fix 2 WARNS: BIOS framebuffer related (FDO #105992) and eDP cdclk mismatch * tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout drm/i915: Adjust eDP's logical vco in a reliable place.
-
Dave Airlie authored
Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fixup pagefault issue of mixer driver - it makes sure to check shadow register for interlace scan. - it corrects chroma_addr[1], height and vertical position values. And trivial cleanup - it just removes duplicated drm_bridge_attach. * tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: hdmi: avoid duplicating drm_bridge_attach drm/exynos: mixer: avoid Oops in vp_video_buffer() drm/exynos/mixer: fix synchronization check in interlaced mode
-
Mathieu Malaterre authored
Both ‘uninorth_remove_memory’ and ‘null_cache_flush’ can be made static. So make them. Silence the following gcc warning (W=1): drivers/char/agp/uninorth-agp.c:198:5: warning: no previous prototype for ‘uninorth_remove_memory’ [-Wmissing-prototypes] and drivers/char/agp/uninorth-agp.c:473:6: warning: no previous prototype for ‘null_cache_flush’ [-Wmissing-prototypes] Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 09 May, 2018 10 commits
-
-
Rex Zhu authored
In order to keep consist with Vega, the output format of the pp_power_profile_mode would be <integer><mode name string>< “*” for current profile>:"detail settings" and remove the "CURRENT" mode line. for example: NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING: 10 0 30 - - - 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM *: 0 5 30 0 100 10 NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING *: 10 0 30 0 100 10 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM: - - - - - - Reviewed-by:
Evan Quan <evan.quan@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
v2: Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT) Avoid printing error message for ERESTARTSYS Originally-by:
David Panariti <David.Panariti@amd.com> Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Michel Dänzer authored
GFP_TRANSHUGE tries very hard to allocate huge pages, which can result in long delays with high memory pressure. I have observed firefox freezing for up to around a minute due to this while restic was taking a full system backup. Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT | __GFP_NORETRY instead, in order to fail quickly when there are no huge pages available. Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed up in the background if necessary. With these changes, I'm no longer seeing freezes during a restic backup. Cc: stable@vger.kernel.org Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Michel Dänzer authored
Allocating up to 32 physically contiguous pages can easily fail (and has failed for me), and isn't necessary anyway. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Harry Wentland authored
The two ranges overlap. Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Jerry (Fangzhi) Zuo authored
Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Harry Wentland authored
Signed-off-by:
-
Boris Brezillon authored
When using uni-planar formats (like RGB), the scaling parameters are stored in plane 0, not plane 1. Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com
-
Peter Rosin authored
drm_bridge_attach takes care of these assignments, so there is no need to open-code them a second time. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
- 08 May, 2018 3 commits
-
-
Florent Flament authored
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` in kernel log at boot time. Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power on its screen during Intel i915 DRM initialization. This currently results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` message appearing in the kernel log during boot time and when stopping the machine. This change increases the timeout of the `intel_enable_lvds` function from 1 to 5 seconds, letting enough time for the Satellite 930 LCD screen to power on, and suppressing the error message from the kernel log. This patch has been successfully tested on Linux 4.14 running on a Toshiba Satellite Z930. [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP code and properly cover the max hw timeout of ~4 seconds, and drop the comment about the specific machine since this is not a particulary surprising issue, nor specific to that one machine] Signed-off-by:
Florent Flament <contact@florentflament.com> Cc: stable@vger.kernel.org Cc: Pavel Petrovic <ppetrovic@acm.org> Cc: Sérgio M. Basto <sergio@serjux.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414 References: https://bugzilla.kernel.org/show_bug.cgi?id=57591Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 280b54ad) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Ville Syrjälä authored
During state readout we first read out the pipe src size, store that information in the user mode h/vdisplay, but later on we overwrite that with the actual crtc timings. That makes our read out crtc state inconsistent with itself when the BIOS has enabled the panel fitter to scale the pipe contents. Let's preserve the pipe src size based information in the user mode to make things consistent again. This fixes a problem introduced by commit a2936e3d ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle") where the inconsistent state is now leading the plane clipping code to report a failure on account the plane dst coordinates not matching the user mode size. Previously we did the plane clipping based on the pipe src size instead and thus never noticed the inconsistency. The failure manifests as a WARN: [ 0.762117] [drm:intel_dump_pipe_config [i915]] requested mode: [ 0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa ... [ 0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143 ... [ 0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC [ 0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0 [ 0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0 [ 0.764713] ------------[ cut here ]------------ [ 0.764714] Could not determine valid watermarks for inherited state [ 0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915] ... Cc: FadeMind <fademind@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by:
FadeMind <fademind@gmail.com> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
-
Rodrigo Vivi authored
On intel_dp_compute_config() we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vco However few moments later on intel_modeset_checks() we fully replace entire intel_atomic_state.cdclk.logical with dev_priv->cdclk.logical fully overwriting the logical desired vco for eDP on gen9. So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read CDCLK_CTL to verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch. [ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 v2: Move the entire eDP's vco logical adjustment to inside the skl_modeset_calc_cdclk as suggested by Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
- 07 May, 2018 12 commits
-
-
Andrzej Hajda authored
The driver can work with or without extcon framework, but if extcon is build as module, sii8620 should be build as module as well. Fixes: 68883844 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180409062708.4326-1-a.hajda@samsung.comSigned-off-by:
Sean Paul <seanpaul@chromium.org>
-
Tomi Valkeinen authored
Handle memory allocation failures in omap_connector to avoid NULL derefs. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-5-tomi.valkeinen@ti.comReviewed-by:
Benoit Parrot <bparrot@ti.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Tomi Valkeinen authored
A bunch of debug and error prints are missing linefeeds. Add those. Signed-off-by:
-
Tomi Valkeinen authored
If get_scale_coef functions fail, they return NULL, but we never check the return value and could do a NULL deref. This should not happen as we ought to validate the amount of scaling already earlier, but to be safe, add the necessary check. Signed-off-by:
-
Tomi Valkeinen authored
soc_device_match() can return NULL, so add a check and fail if soc_device_match() fails. Signed-off-by:
-
Tomi Valkeinen authored
tiler_reserve_2d allocates memory but does not check if it got the memory. Add the check and return ENOMEM on failure. Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Tomi Valkeinen authored
audio_config function for both HDMI4 and HDMI5 return uninitialized value as the error code if the display is not currently enabled. For some reason this has not caused any issues. Signed-off-by:
-
Dan Carpenter authored
Smatch complains that "area_free" could be used without being initialized. This code is several years old and premusably works fine so this can't be a very serious bug. But it's easy enough to silence the warning. If "area_free" is false at the end of the function then we return -ENOMEM. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eric Anholt authored
In the cleanup, I didn't notice that we needed to dereference the connector for the bus_format. Fix the regression by looking up the first (and only) connector attached to us, and assume that its bus_format is what we want. Some day it would be good to have that part of display_info attached to the bridge, instead. v2: Fix stray whitespace change Signed-off-by:
-
Ville Syrjälä authored
Clear the old_state and new_state pointers for private objects in drm_atomic_state_default_clear(). We don't actually have functions to get the new/old state for private objects so getting access to the potentially stale pointers requires a bit more manual labour than for other object types. But let's clear the pointers for private objects as well, if only to avoid future surprises when someone decides to add the functions to get at them. v2: Split private objs to a separate patch (Daniel) Cc: <stable@vger.kernel.org> # v4.14+ Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: a4370c77 (drm/atomic: Make private objs proper objects) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
Clear the old_state and new_state pointers for every object in drm_atomic_state_default_clear(). Otherwise drm_atomic_get_{new,old}_*_state() will hand out stale pointers to anyone who hasn't first confirmed that the object is in fact part of the current atomic transcation, if they are called after we've done the ww backoff dance while hanging on to the same drm_atomic_state. For example, handle_conflicting_encoders() looks like it could hit this since it iterates the full connector list and just calls drm_atomic_get_new_connector_state() for each. And I believe we have now witnessed this happening at least once in i915 check_digital_port_conflicts(). Commit 8b69449d ("drm/i915: Remove last references to drm_atomic_get_existing* macros") changed the safe drm_atomic_get_existing_connector_state() to the unsafe drm_atomic_get_new_connector_state(), which opened the doors for this particular bug there as well. v2: Split private objs out to a separate patch (Daniel) Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: 581e49fe ("drm/atomic: Add new iterators over all state, v3.") Signed-off-by: -
Linus Torvalds authored
-
- 06 May, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pll KVM fixes from Radim Krčmář: "ARM: - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation x86: - Speed up injection of expired timers (for stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove APIC Timer periodic/oneshot spikes arm64: vgic-v2: Fix proxying of cpuif access KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance KVM: arm64: Fix order of vcpu_write_sys_reg() arguments KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - fix a compile warning in the AMD IOMMU driver with irq remapping disabled - fix for VT-d interrupt remapping and invalidation size (caused a BUG_ON when trying to invalidate more than 4GB) - build fix and a regression fix for broken graphics with old DTS for the rockchip iommu driver - a revert in the PCI window reservation code which fixes a regression with VFIO. * tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: rockchip: fix building without CONFIG_OF iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb() iommu/vt-d: fix shift-out-of-bounds in bug checking iommu/dma: Move PCI window region reservation back into dma specific path. iommu/rockchip: Make clock handling optional iommu/amd: Hide unused iommu_table_lock iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when the evaluation of physical and virtual bits which uses the same CPUID leaf was moved out of get_cpu_cap()" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Restore CPUID_8000_0008_EBX reload
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clocksource fixes from Thomas Gleixner: "The recent addition of the early TSC clocksource breaks on machines which have an unstable TSC because in case that TSC is disabled, then the clocksource selection logic falls back to the early TSC which is obviously bogus. That also unearthed a few robustness issues in the clocksource derating code which are addressed as well" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Rework stale comment clocksource: Consistent de-rate when marking unstable x86/tsc: Fix mark_tsc_unstable() clocksource: Initialize cs->wd_list clocksource: Allow clocksource_mark_unstable() on unregistered clocksources x86/tsc: Always unregister clocksource_tsc_early
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix to prevent false positives in the spurious interrupt detector when more than a single demultiplex register is evaluated in the Qualcom irq combiner driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom: Fix check for spurious interrupts
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fixes from Darren Hart: - We missed a case in the Dell config dependencies resulting in a possible bad configuration, resolve it by giving up on trying to keep DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS. - Fix a null pointer dereference at module unload for the asus-wireless driver. * tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.17-rc4. The majority of them are some USB gadget fixes that missed my last pull request. The "largest" patch in here is a fix for the old visor driver that syzbot found 6 months or so ago and I finally remembered to fix it. All of these have been in linux-next with no reported issues" * tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: host: ehci: Use dma_pool_zalloc()" usb: typec: tps6598x: handle block reads separately with plain-I2C adapters usb: typec: tcpm: Release the role mux when exiting USB: Accept bulk endpoints with 1024-byte maxpacket xhci: Fix use-after-free in xhci_free_virt_device USB: serial: visor: handle potential invalid device configuration USB: serial: option: adding support for ublox R410M usb: musb: trace: fix NULL pointer dereference in musb_g_tx() usb: musb: host: fix potential NULL pointer dereference usb: gadget: composite Allow for larger configuration descriptors usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static usb: dwc2: pci: Fix error return code in dwc2_pci_probe() usb: dwc2: WA for Full speed ISOC IN in DDMA mode. usb: dwc2: dwc2_vbus_supply_init: fix error check usb: gadget: f_phonet: fix pn_net_xmit()'s return type
-
- 05 May, 2018 3 commits
-
-
Anthoine Bourgeois authored
Since the commit "8003c9ae: add APIC Timer periodic/oneshot mode VMX preemption timer support", a Windows 10 guest has some erratic timer spikes. Here the results on a 150000 times 1ms timer without any load: Before 8003c9ae | After 8003c9ae Max 1834us | 86000us Mean 1100us | 1021us Deviation 59us | 149us Here the results on a 150000 times 1ms timer with a cpu-z stress test: Before 8003c9ae | After 8003c9ae Max 32000us | 140000us Mean 1006us | 1997us Deviation 140us | 11095us The root cause of the problem is starting hrtimer with an expiry time already in the past can take more than 20 milliseconds to trigger the timer function. It can be solved by forward such past timers immediately, rather than submitting them to hrtimer_start(). In case the timer is periodic, update the target expiration and call hrtimer_start with it. v2: Check if the tsc deadline is already expired. Thank you Mika. v3: Execute the past timers immediately rather than submitting them to hrtimer_start(). v4: Rearm the periodic timer with advance_periodic_target_expiration() a simpler version of set_target_expiration(). Thank you Paolo. Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Anthoine Bourgeois <anthoine.bourgeois@blade-group.com> 8003c9ae ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmRadim Krčmář authored
KVM/arm fixes for 4.17, take #2 - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove state comment in modpost - extend MAINTAINERS entry to cover modpost and more makefiles - fix missed building of SANCOV gcc-plugin - replace left-over 'bison' with $(YACC) - display short log when generating parer of genksyms * tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: genksyms: fix typo in parse.tab.{c,h} generation rules kbuild: replace hardcoded bison in cmd_bison_h with $(YACC) gcc-plugins: fix build condition of SANCOV plugin MAINTAINERS: Update Kbuild entry with a few paths modpost: delete stale comment
-
