The timer subdevice is never initialized due to the 'if (0)'. The
comedi callbacks also don't do anything and just return -EINVAL.

Remove the subdevice and associated code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a number of comments in this driver that are cut-and-paste
from the skel driver. They are not needed in "real" drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'n_boards' define is only used one place in the driver.
Just put the ARRAY_SIZE() where used and remove the define.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'thisboard' and 'devpriv' macros rely on a local variable having
a specific name and yield pointers derived from that local variable.
Replace the macro with local variables where used. Use the
comedi_board() helper to get the 'thisboard' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the comedi_driver attach/detach functions, as well as the
probe function used during the attach. This removes the need
for all the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the comedi_driver variable to remove the need for the
forward declarations. Add some whitespace to the declaration
for aesthetic reasons.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pcmcia device-specific data is not longer needed by this
driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pcmcia suspend/resume callbacks don't do anything. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pcmcia support code in this driver appears to be cut-and-
paste from some other driver. It has code in it to stop the
device during suspend but nothing in the main comedi_driver
uses it.

Remove the 'stop' variable from the pcmcia private data and
all the logic that deals with it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the pcmcia_disable_device() call where needed in the
pcmcia attach/detach and delete the das16cs_pcmcia_release()
function.

Move the logic of das16cs_pcmcia_config() directly into the
attach function and properly return an error code when the
config fails.

Only set the cur_dev, used by the comedi_driver, if the pcmcia
attach is successful. Also, make sure to NULL it in the detach.

Remove all the kernel messages in the pcmcia support code. They
are just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor the pcmcia support code to remove the need for the
forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove some useless comments and whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, add some whitespace to the declaration
of the pcmcia_driver and reorder it a bit.

Also, the symbol 'das16cs_driver' is only referenced in this file,
make it static. This quiets the following sparse warning:

warning: symbol 'das16cs_driver' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As done with the other comedi driver types, register the
comedi_driver first then the pcmcia_driver. Also, make
sure the pcmcia_driver registration succeeds and unregister
the comedi_driver it it fails.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The register/unregister of the pcmcia driver is done is separate
functions that are called by the module_{init,exit} routines.
Simplify the code a bit by moving the register/unregister into
the module_{init,exit} routines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The init and exit functions for this module were being declared
as global symbols. Add the module_{init,exit} declarations and
make the functions static. Also, rename the functions so they
have namespace associated with the module.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the MODULE_* declarations to the end of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Kconfig ensures that this driver can only be build it PCMCIA is
enabled. Remove the unneeded '#if defined (CONFIG_PCMCIA) ,,,' and
the '#else' code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the CONFIG_COMEDI_MITE config options into the `if
COMEDI_PCI_DRIVERS` block so that the `depends on PCI` condition can be
omitted.  Move the CONFIG_COMEDI_NI_TIOCMD config option to the same
block as it selects COMEDI_MITE.  Move the CONFIG_COEMDI_NI_TIO config
option slightly for aesthetic reasons without changing its conditions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At the moment, the options to select drivers for various National
Instruments boards in the "Comedi PCI drivers", "Comedi ISA and PC/104
drivers" and "Comedi PCMCIA drivers" menus do not appear unless you
first enable and enter the "Comedi National Instruments card support"
menu and possibly select some of the options in there.  This is pretty
confusing for the user.

Get rid of the "Comedi National Instruments card support" menu
(CONFIG_COMEDI_NI_COMMON) and make the CONFIG_COMEDI_MITE,
CONFIG_COMEDI_NI_TIO and CONFIG_COMEDI_NI_TIOCMD options selectable by
other options instead of dependencies of those other options.

We lose the ability to build the 'mite', 'ni_tio' and 'ni_tiocmd'
modules independently of other modules, but they are not useful on their
own anyway.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the CONFIG_COMEDI_NI_LABPC option ("NI Lab-PC and compatibles ISA
and PCI support") from the CONFIG_COMEDI_NI_COMMON menu ("Comedi
National Instruments card support  --->") to the
CONFIG_COMEDI_PCI_DRIVERS menu ("Comedi PCI drivers  --->").

It currently depends on PCI but should be split up into separate ISA and
PCI config options eventually as was done for the "das08" driver.  For
now, the PCI card menu seems the best place for it and I plan to get rid
of the CONFIG_COMEDI_NI_COMMON menu altogether.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Selecting the CONFIG_COMEDI_NI_TIO config option causes the 'ni_tio' and
'ni_tiocmd' modules to be built. CONFIG_COMEDI_NI_TIO depends on
CONFIG_COMEDI_MITE which in turn depends on CONFIG_PCI.  However, not
all the drivers that need the 'ni_tio' module also need the 'ni_tiocmd'
module.  Specifically, the ISA and PCMCIA drivers do not need the
'ni_tiocmd' module.

Add a new config option CONFIG_COMEDI_NI_TIOCMD to control building of
the 'ni_tiocmd' module.  It depends on CONFIG_COMEDI_NI_TIO and
CONFIG_COMEDI_MITE.  The existing CONFIG_COMEDI_NI_TIO option no longer
needs to depend on CONFIG_COMEDI_MITE.

Make CONFIG_COMEDI_NI_660X ('ni_660x' module) and
CONFIG_COMEDI_NI_PCIMIO ('ni_pcimio' module) depend on
CONFIG_COMEDI_NI_TIOCMD instead of CONFIG_COMEDI_NI_TIO.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update TODO file.
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Destroy device node & unregister device class from sysfs while unloading
driver
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code cleanup on smtcfb_setmode.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patchs erases fb_alloc_cmap call in smtc_free_fb_info. In the
future, when needed, the required function to call here should be
fb_dealloc_cmap.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes dead code related to BaseAddressInVRAM. It fixes
comment on RAM control bits too.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes dead code.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change printk() messages to pr_* macros.
Signed-off-by: Sherwin Soltani <sherwin@wybc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds support for the Analog Devices AD5450/51/52/53 Digital-to-Analog
converters.

The AD5452 and AD5453 are software compatible to the existing AD5444 and AD5446.
The AD5450 and AD5451 are similar but have a smaller resolution.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This issue was reported by the mini_lock.cocci coccinelle semantic patch.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio_utils.h:367:10: warning: ‘iioutils_break_up_name’ is static but used in inline function ‘build_channel_array’ which is not static [enabled by default]
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drop extra argument, move cast
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up braces on 'if' statements to (mostly) match coding style.
A few other bits, like removing a few blank lines and such may have snug in.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>