- 26 Jan, 2022 1 commit
-
-
Ido Schimmel authored
Remove the 'err' variable and simply return. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Jan, 2022 37 commits
-
-
David Ahern authored
sk_gso_max_size is set based on the dst dev. Both users of it adjust the value by the same offset - (MAX_TCP_HEADER + 1). Rather than compute the same adjusted value on each call do the adjustment once when set. Signed-off-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220125024511.27480-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Variable new_csr6 is being initialized with a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220123183440.112495-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
IPv6 GRO considers packets to belong to different flows when their hop_limit is different. This seems counter-intuitive, the flow is the same. hop_limit may vary because of various bugs or hacks but that doesn't mean it's okay for GRO to reorder packets. Practical impact of this problem on overall TCP performance is unclear, but TCP itself detects this reordering and bumps TCPSACKReorder resulting in user complaints. Eric warns that there may be performance regressions in setups which do packet spraying across links with similar RTT but different hop count. To be safe let's target -next and not treat this as a fix. If the packet spraying is using flow label there should be no difference in behavior as flow label is checked first. Note that the code plays an easy to miss trick by upcasting next_hdr to a u16 pointer and compares next_hdr and hop_limit in one go. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. Also, address the following sparse warnings: drivers/net/ethernet/microsoft/mana/gdma_main.c:677:24: warning: using sizeof on a flexible structure Link: https://github.com/KSPP/linux/issues/174Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This is based on series [0] that extended the PM core. Now the compiler can see the PM callbacks also on systems not defining CONFIG_PM. The optimizer will remove the functions then in this case. [0] https://lore.kernel.org/netdev/20211207002102.26414-1-paul@crapouillou.net/Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tobias Waldekranz says: ==================== net: dsa: Avoid cross-chip syncing of VLAN filtering This bug has been latent in the source for quite some time, I suspect due to the homogeneity of both typical configurations and hardware. On singlechip systems, this would never be triggered. The only reason I saw it on my multichip system was because not all chips had the same number of ports, which means that the misdemeanor alien call turned into a felony array-out-of-bounds access. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Waldekranz authored
Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx. Fixes: d371b7c9 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Waldekranz authored
Most of dsa_switch_bridge_leave was, in fact, dealing with the syncing of VLAN filtering for switches on which that is a global setting. Separate the two phases to prepare for the cross-chip related bugfix in the following commit. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== netns: speedup netns dismantles netns are dismantled by a single thread, from cleanup_net() On hosts with many TCP sockets, and/or many cpus, this thread is spending too many cpu cycles, and can not keep up with some workloads. - Removing 3*num_possible_cpus() sockets per netns, for icmp and tcp protocols. - Iterating over all TCP sockets to remove stale timewait sockets. This patch series removes ~50% of cleanup_net() cpu costs on hosts with 256 cpus. It also reduces per netns memory footprint. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
TCP ipv4 uses per-cpu/per-netns ctl sockets in order to send RST and some ACK packets (on behalf of TIMEWAIT sockets). This adds memory and cpu costs, which do not seem needed. Now typical servers have 256 or more cores, this adds considerable tax to netns users. tcp sockets are used from BH context, are not receiving packets, and do not store any persistent state but the 'struct net' pointer in order to be able to use IPv4 output functions. Note that I attempted a related change in the past, that had to be hot-fixed in commit bdbbb852 ("ipv4: tcp: get rid of ugly unicast_sock") This patch could very well surface old bugs, on layers not taking care of sk->sk_kern_sock properly. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Back in linux-2.6.25 (commit 98c6d1b2 "[NETNS]: Make icmpv6_sk per namespace.", we added private per-cpu/per-netns ipv6 icmp sockets. This adds memory and cpu costs, which do not seem needed. Now typical servers have 256 or more cores, this adds considerable tax to netns users. icmp sockets are used from BH context, are not receiving packets, and do not store any persistent state but the 'struct net' pointer. icmpv6_xmit_lock() already makes sure to lock the chosen per-cpu socket. This patch has a considerable impact on the number of netns that the worker thread in cleanup_net() can dismantle per second, because ip6mr_sk_done() is no longer called, meaning we no longer acquire the rtnl mutex, competing with other threads adding new netns. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Back in linux-2.6.25 (commit 4a6ad7a1 "[NETNS]: Make icmp_sk per namespace."), we added private per-cpu/per-netns ipv4 icmp sockets. This adds memory and cpu costs, which do not seem needed. Now typical servers have 256 or more cores, this adds considerable tax to netns users. icmp sockets are used from BH context, are not receiving packets, and do not store any persistent state but the 'struct net' pointer. icmp_xmit_lock() already makes sure to lock the chosen per-cpu socket. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Prior patches in the series made sure tw_timer_handler() can be fired after netns has been dismantled/freed. We no longer have to scan a potentially big TCP ehash table at netns dismantle. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We will soon get rid of inet_twsk_purge(). This means that tw_timer_handler() might fire after a netns has been dismantled/freed. Instead of adding a function (and data structure) to find a netns from tw->tw_net_cookie, just update the SNMP counters a bit earlier, when the netns is known to be alive. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We want to allow inet_twsk_kill() working even if netns has been dismantled/freed, to get rid of inet_twsk_purge(). This patch adds tw->tw_bslot to cache the bind bucket slot so that inet_twsk_kill() no longer needs to dereference twsk_net(tw) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: updates for stable FW recovery Recent FW work has tightened up timings in its error recovery handling and uncovered weaknesses in the driver's responses, so this is a set of updates primarily for better handling of the firmware's recovery mechanisms. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
This (ab)use of a data buffer made some static code checkers rather itchy, so we replace the a generic data buffer with the union in the struct ionic_vf_setattr_cmd. Fixes: fbb39807 ("ionic: support sr-iov operations") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
The driver can be premature in detecting stalled firmware when the heartbeat is not updated because the firmware can occasionally take a long time (more than 2 seconds) to service a request, and doesn't update the heartbeat during that time. The firmware heartbeat is not necessarily a steady 1 second periodic beat, but better described as something that should progress at least once in every DECVMD_TIMEOUT period. The single-threaded design in the FW means that if a devcmd or adminq request launches a large internal job, it is stuck waiting for that job to finish before it can get back to updating the heartbeat. Since all requests are "guaranteed" to finish within the DEVCMD_TIMEOUT period, the driver needs to less aggressive in checking the heartbeat progress. We change our current 2 second window to something bigger than DEVCMD_TIMEOUT which should take care of most of the issue. We stop checking for the heartbeat while waiting for a request, as long as we're still watching for the FW status. Lastly, we make sure our FW status is up to date before running a devcmd request. Once we do this, we need to not check the heartbeat on DEV commands because it may be stalled while we're on the fw_down path. Instead, we can rely on the is_fw_running check. Fixes: b2b9a8d7 ("ionic: avoid races in ionic_heartbeat_check") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
The dbid_inuse bitmap is not useful in this driver so remove it. Fixes: 6461b446 ("ionic: Add interrupts and doorbells") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
When the driver is going through reset, it will eventually call ionic_lif_init(), which does a lot of re-initialization. One of the re-initialization steps is to setup the adminq and enable napi for it. If something breaks after this point we can end up with a kernel NULL pointer dereference through ionic_adminq_napi. Fix this by making sure to call napi_disable() in the cleanup path of ionic_lif_init(). This forces any pending napi contexts to finish and prevents them from being recalled before deleting the napi context. Fixes: 77ceb68e ("ionic: Add notifyq support") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
Buffer DMA mapping happens in ionic_tx_map_skb() and this function is called from ionic_tx() and ionic_tx_tso(). If ionic_tx_map_skb() succeeds, but a failure is encountered later in ionic_tx() or ionic_tx_tso() we aren't unmapping the buffers. This can be fixed in ionic_tx() by changing functions it calls to return void because they always return 0. For ionic_tx_tso(), there's an actual possibility that we leave the buffers mapped, so fix this by introducing the helper function ionic_tx_desc_unmap_bufs(). This function is also re-used in ionic_tx_clean(). Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
Currently when a request for add/deleting a filter is made when ionic_heartbeat_check() returns failure the driver will be overly verbose about failures, especially when these are usually temporary fails and the request will be retried later. An example of this is a filter add when the FW is in the middle of resetting: IONIC_CMD_RX_FILTER_ADD (31) failed: IONIC_RC_ERROR (-6) rx_filter add failed: ADDR 01:80:c2:00:00:0e Fix this by checking for -ENXIO and other error values on filter request fails before printing the error message. Add similar checking to the delete filter code. Fixes: f91958cc ("ionic: tame the filter no space message") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
Currently when an administrator configures a VF via ndo_set_vf*, the driver will send the set command to FW and then update the cached value. The cached value is then used when reporting VF info via ndo_get_vf_config. A problem is that the VF info may have been updated between the last ndo_set_vf* and ndo_get_vf_info commands via some other method, i.e. a VF changes its MAC address (assuming it's allowed to do so) and since this is all managed by the FW, this new value won't be reflected in the PF's cache of values. To fix this, update the driver to always get the latest VF information by making use of the IONIC_CMD_VF_GETATTR dev command. The FW may not support getting all the attributes for IONIC_CMD_VF_GETATTR, so the driver will only update the cached VF config members if their associated IONIC_CMD_VF_GETATTR was successful. Otherwise the cached VF config members will remain the same as what was set in ndo_set_vf*. Fixes: fbb39807 ("ionic: support sr-iov operations") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
When dev commands fail, an error message will always be printed, which may be overly alarming the to system administrators, especially if the driver shouldn't be printing the error due to some unsupported capability. Similar to recent adminq request changes, we can update the dev command interface with the ability to selectively print error messages to allow the driver to prevent printing errors that are expected. Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
Recent changes went into the driver to allow flexibility when printing error messages. Unfortunately this had the unexpected consequence of printing confusing messages like the following: IONIC_CMD_RX_FILTER_ADD (31) failed: IONIC_RC_SUCCESS (-6) In cases like this the completion of the admin queue command never completes, so the completion status is 0, hence IONIC_RC_SUCCESS is printed even though the command clearly failed. For example, this could happen when the driver tries to add a filter and at the same time the FW goes through a reset, so the AQ command never completes. Fix this by forcing the FW completion status to IONIC_RC_ERROR in cases where we never get the completion. Fixes: 8c9d956a ("ionic: allow adminq requests to override default error message") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Make sure we print the TIMEOUT string if we had a timeout error, rather than printing the wrong status. Fixes: 8c9d956a ("ionic: allow adminq requests to override default error message") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
When IONIC_EVENT_RESET is received, we only need to start the fw_down process if we aren't already down, and we need to be sure to set the FW_STOPPING state on the way. If this is how we noticed that FW was stopped, it is most likely from a FW update, and we'll see a new FW generation. The update happens quickly enough that we might not see fw_status==0, so we need to be sure things get restarted when we see the fw_generation change. Fixes: d2662072 ("ionic: monitor fw status generation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Between fw running and fw actually stopped into reset, we need a fw_stopping concept to catch and block some actions while we're transitioning to FW_RESET state. This will help to be sure the fw_up task is not scheduled until after the fw_down task has completed. On some rare occasion timing, it is possible for the fw_up task to try to run before the fw_down task, then not get run after the fw_down task has run, leaving the device in a down state. This is possible if the watchdog goes off in between finding the down transition and starting the fw_down task, where the later watchdog sees the FW is back up and schedules a fw_up task. Fixes: c672412f ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brett Creeley authored
It's possible the FW is already shutting down while the driver is being removed and/or when the driver is going through reset. This can cause unexpected/unnecessary errors to be printed: eth0: DEV_CMD IONIC_CMD_PORT_RESET (12) error, IONIC_RC_ERROR (29) failed eth1: DEV_CMD IONIC_CMD_RESET (3) error, IONIC_RC_ERROR (29) failed Fix this by checking the FW status register before issuing the reset commands. Also, since err may not be assigned in ionic_port_reset(), assign it a default value of 0, and remove an unnecessary log message. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Pull the watchdog init code out to a separate bite-sized function. Code cleaning for now, will be a useful change in the near future. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
The watchdog expects the lif to fully exist when it goes off, so lets not start the watchdog until all is ready in case there is some quirky time dialation that makes probe take multiple seconds. Fixes: 089406bc ("ionic: add a watchdog timer to monitor heartbeat") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Sparse seems to have gotten a little more picky lately and we need to revisit this bit of code to make sparse happy. warning: incorrect type in initializer (different address spaces) expected union ionic_dev_cmd_regs *regs got union ionic_dev_cmd_regs [noderef] __iomem *dev_cmd_regs warning: incorrect type in argument 2 (different address spaces) expected void [noderef] __iomem * got unsigned int * warning: incorrect type in argument 1 (different address spaces) expected void volatile [noderef] __iomem * got union ionic_dev_cmd * Fixes: d701ec32 ("ionic: clean up sparse complaints") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Use kvzalloc()/kvfree() instead of hand coded functions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Qing Deng authored
Since IPv4 routes support IPv6 gateways now, we can route IPv4 traffic in NBMA tunnels. Signed-off-by: Qing Deng <i@moy.cat> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jisheng Zhang authored
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Variable val is being initialized with a value that is never read, it is being re-assigned later. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20220123184936.113486-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Variable reg is being masked however the variable is never read after this. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220123184035.112785-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 24 Jan, 2022 2 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-01-24 We've added 80 non-merge commits during the last 14 day(s) which contain a total of 128 files changed, 4990 insertions(+), 895 deletions(-). The main changes are: 1) Add XDP multi-buffer support and implement it for the mvneta driver, from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen. 2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra, from Kumar Kartikeya Dwivedi. 3) Extend BPF cgroup programs to export custom ret value to userspace via two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu. 4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima. 5) Complete missing UAPI BPF helper description and change bpf_doc.py script to enforce consistent & complete helper documentation, from Usama Arif. 6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to follow tc-based APIs, from Andrii Nakryiko. 7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu. 8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters and setters, from Christy Lee. 9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to reduce overhead, from Kui-Feng Lee. 10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new() utility function, from Mauricio Vásquez. 11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau. 12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits) selftests, bpf: Do not yet switch to new libbpf XDP APIs selftests, xsk: Fix rx_full stats test bpf: Fix flexible_array.cocci warnings xdp: disable XDP_REDIRECT for xdp frags bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest net: xdp: introduce bpf_xdp_pointer utility routine bpf: generalise tail call map compatibility check libbpf: Add SEC name for xdp frags programs bpf: selftests: update xdp_adjust_tail selftest to include xdp frags bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature bpf: introduce frags support to bpf_prog_test_run_xdp() bpf: move user_size out of bpf_test_init bpf: add frags support to xdp copy helpers bpf: add frags support to the bpf_xdp_adjust_tail() API bpf: introduce bpf_xdp_get_buff_len helper net: mvneta: enable jumbo frames if the loaded XDP program support frags bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program net: mvneta: add frags support to XDP_TX xdp: add frags support to xdp_return_{buff/frame} ... ==================== Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Daniel Borkmann authored
Revert commit 54435652 ("selftests/bpf: switch to new libbpf XDP APIs") for now given this will heavily conflict with 4b27480d ("bpf/selftests: convert xdp_link test to ASSERT_* macros") upon merge. Andrii agreed to redo the conversion cleanly after trees merged. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org>
-