- 01 Apr, 2015 13 commits
-
-
Amitoj Kaur Chawla authored
Removes variable comparison with 0 by using !. Done using following coccinelle script. @ disable is_zero,isnt_zero @ expression *E; expression E1,f; @@ E = f(...) <... ( - E == 0 + !E | - E != 0 + E | - 0 == E + !E | - 0 != E + E ) ...> ?E = E1 @ disable is_zero,isnt_zero @ expression *E; @@ ( E == - 0 + NULL | E != - 0 + NULL | - 0 + NULL == E | - 0 + NULL != E ) Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cristina Opriceana authored
Delete duplicated argument to | for the state argument in the _clr_fwstate_() function call as it is redundant. Detected with coccinelle. Signed-off-by:
Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by:
-
Cristina Opriceana authored
Use memdup_user() to avoid its duplicated implementation and simplify code. memdup_user() uses GFP_KERNEL instead of GFP_ATOMIC, which is valid because copy_from_user() might sleep and it's useless to make the allocation atomic. Found with coccinelle. Signed-off-by:
-
Cristina Opriceana authored
Place driver on standby mode on error in order to prevent wasting power. Move standby function above to be seen by the new call. Signed-off-by:
-
Cristina Opriceana authored
This patch removes explicit NULL comparison and writes it in its equivalent shorter form. Done with coccinelle. @replace_rule@ expression e; @@ -e == NULL + !e Signed-off-by:
-
Cristina Opriceana authored
This patch removes explicit NULL comparison and writes it in its shorter form. Detected with coccinelle. Signed-off-by:
-
Cristina Opriceana authored
This patch removes explicit NULL comparison and replaces it with its shorter form. Detected with coccinelle. Signed-off-by:
-
Cristina Opriceana authored
This patch removes explicit NULL comparison and replaces it with its shorter form. Detected with coccinelle. Signed-off-by:
-
Cristina Opriceana authored
This patch removes explicit NULL comparison and replaces it with its shorter form. Detected with coccinelle. @replace_rule@ expression e; @@ -e == NULL + !e Signed-off-by:
-
Cristina Opriceana authored
This patch removes explicit NULL comparison and writes it in its simpler form. Done with coccinelle: @replace_rule@ expression e; @@ -e == NULL + !e Signed-off-by:
-
Cristina Opriceana authored
Remove explicit NULL comparison and write it in its simpler form. Replacement done with coccinelle: @replace_rule@ expression e; @@ -e == NULL + !e Signed-off-by:
-
Cristina Opriceana authored
This patch checks if an error occurred on probe and stops the device in order to avoid wasting power. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new devices, functionality and cleanup for IIO in the 4.1 cycle. New Functionality * Watermark logic for buffers. Allows for blocking reads to block until their requested amount is available - previously they only blocked until a single scan of data was available. Also allows for polling for a watermark amount of data to be available. This feature was first proposed some time ago to good responses, but not taken further by the original author Octavian has picked up the gauntlet and taken it through to merging (along with the hardware fifo support that follows). * New approach to hardware fifo handling - in particular handling the interaction of a hardware fifo feeding into a software fifo and their watershed events. We don't have every possible case well covered yet, but this is certainly a good, flexible starting point. This will replace the previous approach used in ancient drivers (sca3000) where we just exposed the hardware buffer directly to userspace. Very few pieces of hardware have sufficiently long buffers for that to be an adequate solution. * bmc150_accel - hardware fifo support. * mlx90614 - support dual IR sensor devices + some refactoring to clean up the code and allow some other functionality currently under review. * L3GD20H gyroscope support added to the st_gyro driver. * lis3lv02d accelerometer added to the st_gyro driver. Note this part is also supported by the older lis3 driver under misc. A lengthy discussion took place and concluded that holding parts out on the basis that whole driver would be subsumed into this one was counter productive. Better to add part support and add additional features as people need them. Basically there was not advantage in not merging the support. * max517 driver gains support for MAX520 and MAX521 DACs. Documentation * 3.20 -> 4.0 renaming for recent docs. Whilst technically a fix, I think people will cope until the next merge merge window. * An ABI typo hat -> What: More ABIs should have hats. * Document in_rot_offset, illuminance_raw and illuminance_scale. Cleanups * Fix a scale extraction bug in generic_buffer.c example. * Constify a load of device tree related structures.
-
- 30 Mar, 2015 1 commit
-
-
Irina Tirdea authored
Kernel version for new ABI in 4.0 has been documented as 3.20, since the changes have been merged before the kernel version number change. Change kernel version from 3.20 to 4.0. Signed-off-by:
Irina Tirdea <irina.tirdea@intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
- 29 Mar, 2015 6 commits
-
-
Martin Kepplinger authored
Signed-off-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
Vianney le Clément de Saint-Marcq authored
The model is detected by reading the EEPROM configuration during probing. Signed-off-by:
Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by:
-
Vianney le Clément de Saint-Marcq authored
Add symbols for all accessible RAM and EEPROM registers, as well as the sleep command and timings defined in the datasheet. Signed-off-by:
-
Octavian Purdila authored
We only advertise hardware fifo support if the I2C bus supports full I2C or smbus I2C block data reads since it is mandatory to read the full frame in one read (otherwise the rest of the frame is discarded). The hardware fifo is enabled only when triggers are not active because: (a) when using the any-motion trigger the user expects to see samples based on ROC events, but the fifo stores samples based on the sample frequency (b) the data-ready trigger is waking the CPU for for every sample, so using the hardware fifo does not have any benefit Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Octavian Purdila authored
Some devices have hardware buffers that can store a number of samples for later consumption. Hardware usually provides interrupts to notify the processor when the FIFO is full or when it has reached a certain watermark level. This helps with reducing the number of interrupts to the host processor and thus it helps decreasing the power consumption. This patch enables usage of hardware FIFOs for IIO devices in conjunction with software device buffers. When the hardware FIFO is enabled the samples are stored in the hardware FIFO. The samples are later flushed to the device software buffer when the number of entries in the hardware FIFO reaches the hardware watermark or when a flush operation is triggered by the user when doing a non-blocking read on an empty software device buffer. In order to implement hardware FIFO support the device drivers must implement the following new operations: setting and getting the hardware FIFO watermark level, flushing the hardware FIFO to the software device buffer. The device must also expose information about the hardware FIFO such it's minimum and maximum watermark and if necessary a list of supported watermark values. Finally, the device driver must activate the hardware FIFO when the device buffer is enabled, if the current device settings allows it. The software device buffer watermark is passed by the IIO core to the device driver as a hint for the hardware FIFO watermark. The device driver can adjust this value to allow for hardware limitations (such as capping it to the maximum hardware watermark or adjust it to a value that is supported by the hardware). It can also disable the hardware watermark (and implicitly the hardware FIFO) it this value is below the minimum hardware watermark. Since a driver may support hardware FIFO only when not in triggered buffer mode (due to different semantics of hardware FIFO sampling and triggered sampling) this patch changes the IIO core code to allow falling back to non-triggered buffered mode if no trigger is enabled. Signed-off-by:
-
Josselin Costanzi authored
Currently the IIO buffer blocking read only wait until at least one data element is available. This patch makes the reader sleep until enough data is collected before returning to userspace. This should limit the read() calls count when trying to get data in batches. Co-author: Yannick Bedhomme <yannick.bedhomme@mobile-devices.fr> Signed-off-by:
Josselin Costanzi <josselin.costanzi@mobile-devices.fr> [rebased and remove buffer timeout] Signed-off-by:
-
- 28 Mar, 2015 7 commits
-
-
Robert Dolca authored
It can be used exactly like L3GD20 but it has a different WhoAmI register value. Signed-off-by:
Robert Dolca <robert.dolca@intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Irina Tirdea authored
When using generic_buffer to read data, the scale is not properly detected for scale shared by type. This is caused by a problem with the generation of generic name out of the full name. E.g.: for current->name in_accel_z, the extracted generic name is "in" (when it should be "in_accel"). This is used in generic_buffer to generate scale and offset paths (in_accel_scale). Consider the in_ or out_ prefix when extracting the generic name from the full name. Signed-off-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
-
Haneen Mohammed authored
This patch adds ABI documentation entries for in_rot_offset. At least one user for these is present that is the HID Sensors Driver. Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
-
Antonio Fiol authored
MAX520 and MAX521 are protocol-compatible with the already supported chips, just have more channels. Signed-off-by:
Antonio Fiol <antonio@fiol.es> Signed-off-by:
-
Fabian Frederick authored
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Darshana Padmadas authored
This patchset adds ABI documentation for the following attributes: in_illuminance_scale, used atleast once in al3320a staging/iio/light/ in_illuminance_calibscale, used atleast once in cm32181 in_illuminance_input, used in cm3232 at least once in_illuminance_raw used atleast once in al3320a in_illuminance_clear_raw and in_illuminance_ir_raw exposed by gp2ap020a00f with modifiers IIO_MOD_LIGHT_CLEAR and IIO_MOD_LIGHT_IR respectively. Signed-off-by:
Darshana Padmadas <darshanapadmadas@gmail.com> Signed-off-by:
-
Linus Walleij authored
This adds support for the LIS3LV02 accelerometer found in the ST Microelectronics Nomadik board series. Cc: devicetree@vger.kernel.org Cc: Denis CIOCCA <denis.ciocca@st.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
- 26 Mar, 2015 13 commits
-
-
Helen Fornazier authored
This patch fixes the checkpatch.pl error: ERROR: "foo * bar" should be "foo *bar" +int ddk750_initHw(initchip_param_t * pInitParam) Signed-off-by:
Helen Fornazier <helen.fornazier@gmail.com> Signed-off-by:
-
Helen Fornazier authored
This patch fixes the checkpatch.pl error: ERROR: trailing statements should be on next line Signed-off-by:
-
Helen Fornazier authored
This patch fixes the checkpatch.pl error: ERROR: space required after that ',' (ctx:VxV) Signed-off-by:
-
Helen Fornazier authored
This patch fixes the checkpatch.pl warnings: ERROR: space required before the open parenthesis '(' + switch(divisor) { ERROR: space required before the open parenthesis '(' + switch(divisor) { ERROR: space required before the open parenthesis '(' + switch(reg) { Signed-off-by: -
Helen Fornazier authored
This patch fix the checkpatch.pl warning: ERROR: space required before the open parenthesis '(' Signed-off-by: -
Helen Fornazier authored
This patch fixes the checkpatch.pl warnings: ERROR: spaces required around that '=' (ctx:VxV) ERROR: spaces required around that '<=' (ctx:VxV) ERROR: spaces required around that '>' (ctx:VxV) ERROR: space required before the open parenthesis '(' ERROR: space required after that ';' (ctx:VxV) Signed-off-by: -
Helen Fornazier authored
This patch fixes the checkpatch.pl errors: ERROR: that open brace { should be on the previous line ERROR: else should follow close brace '}' WARNING: braces {} are not necessary for single statement blocks ERROR: space required before the open brace '{' Signed-off-by: -
Helen Fornazier authored
This patch fixes checkpatch.pl warning: WARNING: missing space after struct definition +typedef struct _pllcalparam{ Signed-off-by: -
Niranjan Dighe authored
Removing code guarded by undefined macro SLIC_TRACE_DUMP_ENABLED Signed-off-by:
Niranjan Dighe <niranjan.dighe@gmail.com> Signed-off-by:
-
Sudip Mukherjee authored
the comparison is always true as the dev_t has been initialized in the init function and we are sending that initialized dev_t to the cleanup(). Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by:
-
Sudip Mukherjee authored
the global variable majordev is no longer required, as it is not being used anywhere. Signed-off-by:
-
Sudip Mukherjee authored
the dev_t was being stored in visorchipset_platform_device.dev.devt while initializing the module. so pass that value as an argument to cleanup() so that it can use this local variable instead of the global variable. Signed-off-by:
-
Sudip Mukherjee authored
we are getting dev_t as an argument in the function, so use the local variable instead of the global variable "majordev". this global variable will be removed in one of the next patch of the series. Signed-off-by:
-
